A320 Aircraft Systems · Chapter 8
Autothrust and Alpha Floor How the A320 autothrust is armed, activated and disconnected with the thrust levers, what its modes mean on the FMA, how it holds speed on the approach, and how alpha floor and the low energy alert protect you.
TOGA FLX/MCT CL IDLE REV IDLE MAX REV SPEED ALT NAV AP1 1 FD 2 A/THR © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to the last of our three auto flight lessons: the autothrust. On the A320 the thrust levers do not move when the autothrust changes the thrust, so you need a very clear picture of how lever position, autothrust state and FMA belong together. We start with the levers and their detents, then the three autothrust states: disconnected, armed and active, and exactly how you move between them. We look at the warnings when it disconnects, and the thrust lock that catches pilots out. Then the modes: thrust, speed and Mach, and retard, and how the autothrust holds speed on the approach with the ground speed mini function. Finally the protections: alpha floor, and the low energy speed speed speed alert.
Autothrust
Our route through the A/THR SPEED ALT NAV AP1 1 FD 2 A/THR Levers and states Detents, active range; disconnected, armed and active.
Disconnection Standard and non-standard, warnings and thrust lock.
Modes THRUST, SPEED/MACH, RETARD; the FMA column 1; managed speed.
Protections Approach logic, ground speed mini, alpha floor, low energy.
Chapter 8 · Autothrust and Alpha Floor
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is our route. First the hardware: the thrust levers and their detents, and the idea of an active range. Then the three autothrust states, disconnected, armed and active, and how lever movements and the FCU button move you between them. Third, disconnection: the standard way, the non-standard way, the warnings each one gives, and thrust lock. Fourth, the modes you see in FMA column one: thrust modes, speed and Mach, and retard, with the managed and selected speed targets behind them. And last, the protections: how the autothrust behaves on the approach, the ground speed mini function with a worked example, alpha floor, and the low energy aural alert. By the end, you should be able to predict the FMA for any lever position.
Architecture
What the autothrust is A function of the FMGS : one A/THR command in each FMGC The master FMGC drives both engines through 2 EIUs and the engine ECUs/EECs Holds a thrust (THRUST mode) or a speed/Mach (SPEED/MACH mode) A.FLOOR : maximum thrust at a very high angle of attackAlone it always holds speed ; with AP/FD its mode follows the pitch mode Never commands more than the lever position allows (except alpha floor) Two A/THR commands, one master FMGC 1 A/THR command 1 FMGC 2 A/THR command 2 master EIU 1 engine interface unit EIU 2 engine interface unit ECU / EEC 1 FADEC, engine 1 ECU / EEC 2 FADEC, engine 2 the master commands both engines Thrust levers set the maximum thrust the A/THR may use SPEED A/THR FMA col. 1 and 5
Chapter 8 · Autothrust and Alpha Floor
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The autothrust is part of the flight management and guidance system. Each FMGC has its own autothrust command, and each one can control both engines at once, through two engine interface units and the engine control units of the FADECs. Only one of them is in charge: the master FMGC. When active, the autothrust either holds a particular thrust, which is a thrust mode, or holds a speed or Mach number, which is a speed mode, and in an emergency it uses alpha floor to set maximum thrust when the angle of attack gets too high. Working alone, it always holds the speed. With the autopilot or flight director engaged, its mode is tied to the pitch mode, as we learned last lesson. And one rule underpins everything: it never commands more thrust than the lever position allows, except in alpha floor.
Thrust levers
Six positions and the active range TOGA FLX/MCT CL IDLE REV IDLE MAX REV TO GA maximum takeoff thrust FLX MCT max continuous, FLX at takeoff (GA SOFT at go-around on some aircraft) CL maximum climb thrust: the normal A/THR position IDLE (0) idle thrust; pull up to clear the stop for reverse REV IDLE · MAX REV idle reverse, maximum reverse active range, 2 engines: IDLE to CL one engine inop: IDLE to MCT A/THR off: each lever position = a given thrust A/THR active: the lever sets the maximum it may command
Chapter 8 · Autothrust and Alpha Floor
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
The thrust levers have six positions. From the front: TOGA, maximum takeoff thrust. FLX MCT, which is maximum continuous thrust, or FLX at takeoff when a flexible temperature is set, and on some aircraft the soft go-around thrust. CL, maximum climb thrust. IDLE, marked zero. Then, after you lift the levers over the idle stop, reverse idle and maximum reverse. With the autothrust off, every lever position simply corresponds to a thrust. With the autothrust active, the lever position becomes the upper limit of what the autothrust may command. The active range, where the autothrust can be active, runs from IDLE up to the CL detent with both engines running, and from IDLE up to MCT with one engine inoperative. In normal flight you leave the levers in the CL detent from thrust reduction all the way to touchdown.
Thrust levers
What the levers do with the A/THR FLX or TOGA at takeoff: arm the A/THR and engage takeoff/go-around modesIn the active range: A/THR active With A/THR active: lever position = maximum thrust Both levers to IDLE : A/THR disconnects A/THR not active: levers set thrust manually At CL , the A/THR can command anything from idle to max climb TOGA FLX/MCT CL IDLE REV IDLE MAX REV Levers in CL: A/THR may command idle to max climb
Chapter 8 · Autothrust and Alpha Floor
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Watch the levers in the scene. For takeoff the crew sets them to FLX or TOGA: that arms the autothrust and engages the takeoff modes, and the engines go to the thrust of that detent. After takeoff the levers come back to the climb detent, which is inside the active range, and the autothrust becomes active. From now on the lever position is a ceiling: in CL, the autothrust can command anything between idle and maximum climb thrust, whatever the guidance needs, while the levers stay still. If the autothrust is not active, the levers command thrust directly, like any aircraft. And bringing both levers back to idle is one of the standard ways to disconnect the autothrust, which is exactly what you do at touchdown.
A/THR states
Disconnected, armed or active State FCU A/THR pb FMA column 5 Meaning Disconnected off nothing neither armed nor active; levers control thrust directly Armed green A/THR (blue)ready, waiting for the levers to enter the active range; e.g. MAN FLX, MAN TOGA, MAN THR in column 1 Active green A/THR (white) controlling thrust or speed; mode in green in column 1 (SPEED, THR CLB, THR IDLE…) Levers decide whether an armed A/THR is active: inside the active range = active, outside = armed (levers control thrust)
Chapter 8 · Autothrust and Alpha Floor
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The autothrust is always in one of three states, and the lever position decides between the last two. Disconnected means it is neither armed nor active: the FCU button is dark, there is nothing in FMA column five, and the levers control thrust directly. Armed means it is ready but not controlling anything: the FCU button is lit green and A slash THR appears in blue in column five. You will see this on the takeoff roll, with MAN FLX or MAN TOGA in column one, because the levers are outside the active range. Active means it is controlling thrust or speed: the button is green, A slash THR is white in column five, and its mode shows in green in column one. Move an armed autothrust into the active range and it becomes active; move an active one out of the range and it goes back to armed.
Arming
How the autothrust arms Needs 1 FMGC, 1 FAC, 2 ADIRS, 2 FADECs, 1 FCU channel, 1 LGCIU Ground: A/THR pb with engines not running , or levers to FLX/TOGA with engines running Flight: A/THR pb with levers out of the active range Flight: active A/THR and levers pushed beyond CL (one beyond MCT) Flight: go-around (MAN TOGA); TCAS RA (some aircraft) Levers to idle on the takeoff roll: disarmed until airborne Needs at least… 1 FMGC 1 FAC 2 ADIRS 2 FADECs 1 FCU channel 1 LGCIU …and instinctive disconnect not held for more than 15 s Arms on the ground A/THR pb pushed with engines not running levers set to FLX or TOGA with engines running levers to idle on takeoff: disarmed until airborne Arms in flight A/THR pb with levers out of the active range levers pushed beyond CL (or one above MCT) while active go-around: levers to TOGA TCAS RA, if installed
Chapter 8 · Autothrust and Alpha Floor
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Before it can arm, the autothrust needs a minimum set of equipment. The most important items are one FMGC, one FAC, two ADIRS, two FADECs, one FCU channel and one landing gear control interface unit, and the instinctive disconnect button must not have been held for more than fifteen seconds. On the ground, it arms when you press the FCU button with the engines stopped, or, the normal way, when you set the levers to FLX or TOGA with the engines running. In flight, it arms when you press the button with the levers outside the active range, when you push the levers beyond CL with the autothrust active, and at a go-around when you set TOGA. One trap for the exam: if you bring the levers to idle during the takeoff roll, the autothrust disarms, and it cannot be rearmed until the aircraft is airborne.
Activation
From armed to active Armed + both levers between CL and IDLE (two engines): active Engine out: one lever between MCT and IDLE Disconnected + levers in the active range: push the A/THR pb Both levers at IDLE + pb: armed and active at once, idle thrust Alpha floor activates it whatever the levers or statusActive: pb green , mode green in col. 1, A/THR white in col. 5 Armed A/THR becomes active when… TOGA FLX/MCT CL IDLE REV IDLE MAX REV both levers between IDLE and CL (two engines) one lever between IDLE and MCT (one engine inop) • Disconnected + levers in active range: push A/THR pb • Both levers at IDLE + pb: armed and active, idle thrust • Alpha floor: active whatever the levers and A/THR status • Active: pb green, mode green in col. 1, A/THR white in col. 5
Chapter 8 · Autothrust and Alpha Floor
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
An armed autothrust becomes active as soon as both levers are between the CL and IDLE detents with two engines running, or, with one engine inoperative, when the live engine lever is between MCT and IDLE. If the autothrust is disconnected but the levers are already in the active range, simply press the FCU button and it becomes active straight away. A subtle case: with both levers at idle the autothrust disconnects, but pressing the FCU button arms and activates it at the same moment, and because of the lever position it can only give idle thrust. Alpha floor is the exception to everything: it activates the autothrust whatever its status and wherever the levers are. When active, the FCU button is green, the mode is green in FMA column one and A slash THR is white in column five.
Moving the levers
Out of the CL detent with A/THR active Both levers above CL (one above MCT): A/THR armed , MAN THR , thrust follows the levers Gives an immediate thrust increase Both levers below CL : still active but limited ; LVR CLB (LVR MCT) flashes A/THR LIMITED caution and single chime every 5 s One lever in CL and one not: LVR ASYM amber MAN THR ALT NAV AP1 1 FD 2 A/THR Both levers above CL (one above MCT, engine out) A/THR armed: levers control thrust directly; immediate thrust increase THR LVR LVR CLB ALT NAV AP1 1 FD 2 A/THR Both levers below CL (or MCT) LVR CLB (or LVR MCT) flashes white; A/THR LIMITED, chime every 5 s SPEED LVR ASYM ALT NAV AP1 1 FD 2 A/THR One lever in CL, the other not LVR ASYM amber until both are in CL
Chapter 8 · Autothrust and Alpha Floor
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
With the autothrust active, the levers belong in the CL detent, or in MCT with one engine out. Watch what happens when you move them. Push both levers above CL, and the autothrust goes back to armed: A slash THR turns blue, MAN THR appears in column one, and the levers now command the thrust directly. That is how you get an immediate thrust increase without disconnecting anything. Pull both levers below CL, and the autothrust stays active but it is limited to the lower lever position, so it may not be able to hold the speed. LVR CLB, or LVR MCT with one engine, flashes on the FMA, and an amber A slash THR LIMITED caution with a single chime repeats every five seconds until the levers go back. With one lever in CL and the other not, LVR ASYM appears in amber.
Disconnection
Standard and non-standard disconnection Standard : instinctive disconnect pb on a thrust lever, or both levers to IDLE Non-standard : A/THR pb on the FCU, or loss of an arming conditionStandard: short warnings · non-standard: warnings stay until cleared Disconnect pb held more than 15 s : A/THR and alpha floor lost for the flight Recovered only at the next FMGC power-up on the ground Standard disconnection • instinctive disconnect pb on a thrust lever • or both thrust levers to IDLE short warning: MASTER CAUT, A/THR OFF on ECAM, single chime instinctive disconnect pb Non-standard disconnection • A/THR pb on the FCU pressed while armed or active • loss of an arming condition (failure) warning stays until the crew acts; if levers are in CL (MCT): thrust lock Disconnect pb held more than 15 s A/THR lost for the rest of the flight, including ALPHA FLOOR; back only at the next FMGC power-up on the ground
Chapter 8 · Autothrust and Alpha Floor
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are two ways to disconnect the autothrust, and the A320 treats them differently. The standard way is to press the instinctive disconnect button on the side of a thrust lever, or to bring both levers back to idle. You get a short, temporary warning. The non-standard way is to press the A slash THR button on the FCU while it is armed or active, or to lose one of the arming conditions through a failure. Then the warning stays until you act. And now an important caution. If you press and hold an instinctive disconnect button for more than fifteen seconds, the autothrust is disconnected for the rest of the flight, and every autothrust function goes with it, including alpha floor. It only comes back at the next FMGC power up on the ground. This is used deliberately when the autothrust is misbehaving.
Disconnection warnings
What the crew sees and hears Instinctive pb, or both levers to IDLE (above 50 ft RA) Any other way (FCU pb, failure) MASTER CAUT light lit, 3 s at most lit until cancelled ECAM amber A/THR OFF message, 9 s at most AUTO FLT A/THR OFF amber caution; with thrust lock, ENG THRUST LOCKED flashing and blue THR LEVERS ... MOVE Aural single chime single chime CLR pb on ECAM panel out lit Pressing the instinctive pb MASTER CAUT out, message erased MASTER CAUT out STATUS message no yes
Chapter 8 · Autothrust and Alpha Floor
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the indications side by side. With a standard disconnection, by the instinctive button or by both levers to idle above fifty feet, the master caution lights for three seconds at most, an amber A slash THR OFF message shows on the ECAM for nine seconds at most, and there is one single chime. Pressing the instinctive button again clears it all. With any other disconnection, by the FCU button or a failure, the master caution stays lit, ECAM shows the AUTO FLT A slash THR OFF caution with the CLR button lit, and a status message is generated. If the levers were in the CL detent at that moment, you also get thrust lock, with ENG THRUST LOCKED flashing and the blue action line THR LEVERS MOVE. The single chime is the same in both cases. The difference is whether the warnings go away by themselves.
Thrust lock
THR LK: thrust frozen in the detent Levers in CL (MCT engine out) and A/THR lost by the FCU pb or a failure Thrust frozen at its value before disconnection FMA THR LK flashing amber; ECAM ENG THRUST LOCKED every 5 s Single chime and MASTER CAUT flash every 5 s; THR LEVERS … MOVE Move the levers out of the detent: manual thrust, all warnings stopThrust lock: thrust frozen in the CL detent THR CLB ALT NAV AP1 1 FD 2 THR LK ALT NAV AP1 1 FD 2 before: A/THR active · after FCU pb or failure: no A/THR, THR LK flashing ENG THRUST LOCKED - THR LEVERS ............ MOVE (flashes, single chime and MASTER CAUT every 5 s) Triggers levers in CL (MCT engine out) and A/THR pb pressed or A/THR failure Effect thrust stays at the value before disconnection Ends move the levers out of the detent: manual thrust, warnings stop
Chapter 8 · Autothrust and Alpha Floor
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Thrust lock is the A320 answer to a nasty problem. The levers sit in the climb detent while the autothrust varies the thrust. If the autothrust suddenly disappears, because someone pressed the FCU button or because of a failure, the lever position would correspond to full climb thrust, which might be a big jump. So instead the thrust is frozen at whatever it was just before the disconnection. You see THR LK flashing amber in FMA column one, ECAM shows ENG THRUST LOCKED with the blue line THR LEVERS MOVE, and a single chime and master caution repeat every five seconds. The cure is in the action line: move the levers out of the detent. As soon as you do, the lock is removed, you have manual thrust following the levers, and all the warnings stop. Match the levers to the thrust before you move them.
A/THR modes
Which mode, when A/THR mode Engaged with What it does THRUST OP CLB, OP DES, CLB, EXP CLB, EXP DES, SRS, DES on an idle path holds a fixed thrust (CLB, MCT, IDLE…), limited by the levers; pitch holds the speed SPEED / MACH V/S, FPA, ALT*, ALT CST*, ALT, ALT CRZ, G/S*, G/S, FINAL, DES geometric; or no AP and no FD holds the speed or Mach target (selected or managed) RETARD AP in LAND during an automatic landing idle during the flare, from about 40 ft ALPHA FLOOR FAC signal, whatever the AP/FD mode TOGA thrust regardless of the levers Normal lever position all modes except takeoff and go-around CL detent (MCT engine out); otherwise LVR CLB (LVR MCT) flashes
Chapter 8 · Autothrust and Alpha Floor
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
The autothrust modes are chosen automatically together with the autopilot and flight director modes, except alpha floor, which overrides everything. In thrust mode the autothrust holds a fixed thrust, limited by the levers, and the pitch mode holds the speed: that is open climb and descent, managed climb, expedite, SRS and the idle part of a managed descent. In speed or Mach mode the autothrust holds the target speed, while the pitch mode holds a path: vertical speed, flight path angle, the altitude modes, the glideslope, FINAL and a geometric descent, and also whenever neither autopilot nor flight director is engaged. Retard mode is only for the flare of an automatic landing. Alpha floor sets TOGA regardless of the levers. And in all normal flight after takeoff, the levers live in the CL detent, or MCT with one engine out.
FMA column 1
Autothrust annunciations FMA State Meaning MAN TOGA · MAN FLX 58 · MAN MCT (white box) armed a lever in TOGA, in FLX/MCT with FLX temperature 58 °C, or in FLX/MCT MAN THR (white box) armed lever between detents above CL, or both levers below CL MAN GA SOFT (some aircraft) armed soft go-around: levers above CL, at or below FLX/MCT, after TOGA THR CLB · THR MCT active, thrust most advanced lever in CL · in MCT with an engine out THR IDLE · THR LVR active, thrust idle commanded · levers below CL (live engine below MCT) SPEED · MACH active, speed holding the speed or Mach target A.FLOOR · TOGA LK (flashing amber box) active TOGA while α-floor conditions last · TOGA locked after they end
Chapter 8 · Autothrust and Alpha Floor
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
FMA column one tells you exactly what the autothrust is doing. The MAN annunciations in a white box all mean the autothrust is armed and the levers are in control: MAN TOGA and MAN FLX, with the flex temperature, on the takeoff roll; MAN MCT; MAN THR with a lever between detents; and on some aircraft MAN GA SOFT for a soft go-around. The THR annunciations mean it is active in a thrust mode: THR CLB with the lever in the climb detent, THR MCT with an engine out, THR IDLE, and THR LVR when the levers are below CL and the lever is now the limit. SPEED and MACH mean it is holding a speed. And A dot FLOOR and TOGA LK, in a flashing amber box, are the protection modes. On aircraft that show it, the autobrake mode also appears in this column.
Worked example
Takeoff to level off: lever, FMA and A/THR state Takeoff roll levers FLX MAN FLX +58 SRS CLB RWY NAV 1 FD 2 A/THR 1 FD 2 A/THR column 5 A/THR blue = armed white = active levers: FLX/MCT THR RED altitude LVR CLB flashing MAN FLX +58 LVR CLB SRS CLB NAV AP1 1 FD 2 A/THR AP1 1 FD 2 A/THR column 5 A/THR blue = armed white = active levers: FLX/MCT Levers to CL A/THR active THR CLB SRS CLB NAV AP1 1 FD 2 A/THR AP1 1 FD 2 A/THR column 5 A/THR blue = armed white = active levers: CL ACC ALT pitch flies speed THR CLB CLB ALT NAV AP1 1 FD 2 A/THR AP1 1 FD 2 A/THR column 5 A/THR blue = armed white = active levers: CL Level off A/THR holds speed SPEED ALT NAV AP1 1 FD 2 A/THR AP1 1 FD 2 A/THR column 5 A/THR blue = armed white = active levers: CL
Chapter 8 · Autothrust and Alpha Floor
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us follow a normal departure and read column one and column five together. On the takeoff roll the levers are in FLX: MAN FLX plus fifty eight in a white box, and A slash THR in blue, because the autothrust is armed but the levers are outside the active range. At the thrust reduction altitude LVR CLB starts flashing: the system is asking you to bring the levers back. You set them to CL, the autothrust becomes active, and you see THR CLB in green and A slash THR in white. SRS is still flying the speed with pitch. At the acceleration altitude CLB takes over in pitch, still with THR CLB. And when the aircraft levels off at the cleared altitude, pitch holds the altitude, so the autothrust changes to SPEED. The levers never moved after thrust reduction.
FMA column 1, third line
LVR messages, THR LK and autobrake Message Meaning LVR CLB (flashing) set the levers to CL: above thrust reduction altitude with both engines; MASTER CAUT and chime every 5 s if below CL LVR MCT (flashing) set the live engine lever to FLX/MCT after an engine failure, speed above green dot LVR TOGA (flashing, some aircraft) one-engine go-around: live lever brought to FLX/MCT before thrust reduction altitude (also soft GA cases); chime every 3 s LVR ASYM (amber) one lever in CL or FLX/MCT and the other not THR LK (flashing) thrust locked after A/THR disconnection with levers in CL (MCT); chime and MASTER CAUT every 5 s BRK LO · MED · MAX (some aircraft) autobrake: blue when armed, green in a white box when active
Chapter 8 · Autothrust and Alpha Floor
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
The third line of column one carries the lever messages. LVR CLB flashes above the thrust reduction altitude with both engines running, asking you to set the climb detent, and if the levers are below CL the master caution flashes and a chime sounds every five seconds. LVR MCT is the engine-out version, after an engine failure once the speed is above green dot. On some aircraft LVR TOGA asks you to return the live lever to TOGA in a one engine go-around if you pulled it back to MCT too early, with a chime every three seconds. LVR ASYM appears when one lever is in the detent and the other is not. THR LK we have met. And on later aircraft the autobrake mode is shown here too: blue when armed, green in a white box once braking.
SPEED / MACH mode
Holding the speed, within limits A/THR varies thrust to hold the speed or Mach target Target selected on the FCU (blue) or managed by the FMGC (magenta) Never above VMAX (high-lift) or VMAX − 5 kt clean Never below VLS (selected) or the manoeuvring speed of the configuration (managed) SPEED → MACH: automatic at crossover if managed; SPD/MACH pb if selected 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 selected 250 kt (blue) SPEED or MACH A/THR adjusts thrust to hold the target Upper limit VMAX (high-lift config); VMAX − 5 kt clean Lower limit selected target: VLS · managed: VAPP, F, S or green dot SPEED ↔ MACH managed: automatic at crossover; selected: SPD/MACH pb
Chapter 8 · Autothrust and Alpha Floor
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
In speed or Mach mode the autothrust adjusts the thrust to acquire and hold a target, which is either selected on the FCU, shown in blue on the speed scale, or managed by the FMGC, shown in magenta. Whatever the target, the autothrust protects the speed. It will not go above VMAX in a high lift configuration, or VMAX minus five knots when clean. At the bottom, a selected target is limited to VLS, and a managed target to the manoeuvring speed of the current configuration: VAPP, F, S or green dot. So if you select a speed below VLS, the aircraft simply flies VLS. The changeover from speed to Mach in the climb happens automatically at the crossover altitude when the speed is managed; with a selected speed you press the SPD MACH button yourself.
Speed target
Managed and selected speed Managed (needs AP or FD): push SPD knob, EXPED, V2 inserted , SRSProfile: V2 → SPD LIM → ECON CLB → ECON CRZ → ECON DES → SPD LIM → VAPP , with constraints if NAV Selected : pull SPD knob (after lift-off), both AP/FD off (except approach phase), FM target lostSelected has priority; only go-around switches back to managed automatically Messages: SET MANAGED SPEED , SET HOLD SPEED , SET GREEN DOT SPEED Dual FM failure: VAPP memorised below 700 ft on LOC/G/S Managed speed profile (with NAV) V2 SPD LIM SPD CSTR ECON CLB ECON CRZ M ECON DES SPD LIM SPD CSTR HOLD VAPP without NAV: constraints dropped · EXPED: SPD LIM and constraints ignored Managed push SPD knob, EXPED, V2 inserted, SRS; magenta on PFD, window dashed Selected pull SPD knob (5 s after lift-off), both AP/FD off (not in APPR phase), FM target lost Selected wins only automatic return to managed: go-around engagement Dual FM failure LOC/G/S below 700 ft: memorised VAPP; GA: max(VAPP, GA speed); else selected = current
Chapter 8 · Autothrust and Alpha Floor
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
The speed target behind the speed mode is managed or selected. It is managed, magenta on the PFD with dashes in the FCU window, when an autopilot or flight director is engaged and you push the speed knob, engage expedite, insert V two, or SRS engages. The managed profile runs from V two through the speed limit, the economy climb, cruise Mach and descent speeds, the speed limit again, any hold speed, to VAPP, including speed constraints if NAV is engaged. It becomes selected when you pull the knob, when both autopilots and flight directors are off outside the approach phase, or when the managed target is lost. Selected has priority, and the only automatic switch back to managed is at go-around. If both FMs fail on an ILS below seven hundred feet, the memorised VAPP is kept; otherwise the current speed becomes a selected target.
RETARD mode
Idle in the flare Only in an automatic landing (AP in LAND ) Engages at about 40 ft RA , stays after touchdown Commands IDLE : FMA and engine display show IDLE "RETARD " callout at 10 ft : crew sets levers to IDLE AP off before touchdown: SPEED replaces RETARD, reduce thrust manually Manual landing: callout at 20 ft as a reminder RETARD in an automatic landing ≈ 40 ft: RETARD 10 ft: "RETARD" IDLE FLARE CAT 3 DUAL AP1+2 1 FD 2 A/THR Only with the AP in LAND (automatic landing) Idle during the flare, stays after touchdown AP off before touchdown: SPEED replaces RETARD, reduce thrust by hand Manual landing: "RETARD" called at 20 ft as a reminder
Chapter 8 · Autothrust and Alpha Floor
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Retard is a special mode that exists only in an automatic landing, with the autopilot in LAND. At about forty feet radio height, as the flare begins, retard engages and commands idle thrust; the FMA and the engine display both show IDLE, and the mode stays engaged after touchdown. At ten feet the aircraft calls RETARD, and that is your cue to bring the levers to idle, which confirms the reduction and disconnects the autothrust. If the autopilot is disconnected during the flare before touchdown, retard is replaced by speed mode, which will try to hold the approach speed, so you must reduce the thrust yourself. In a manual landing there is no retard mode, but the same callout comes at twenty feet as a reminder to close the levers.
Approach
A/THR on the approach Below 3 200 ft RA with at least CONF 1 : approach tuning Above 150 ft : more responsive to speed changesBelow 150 ft : less responsive, avoids large thrust increases and a long flareAt 700 ft RA : speed target memorised; later VAPP or wind entries have no effect Managed: target = VAPP corrected by ground speed mini Autothrust on the approach 3 200 ft RA (CONF ≥ 1) 700 ft: target memorised 150 ft more responsive less responsive 3 200 ft to 150 ft A/THR more responsive to speed changes Below 150 ft less responsive: avoids big thrust bursts and a long flare At 700 ft speed target memorised; later VAPP or wind entries ignored Managed speed magenta target = VAPP corrected by ground speed mini
Chapter 8 · Autothrust and Alpha Floor
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
On the approach the autothrust changes its character. Below three thousand two hundred feet radio height, with at least CONF one, it is tuned for the approach. Above one hundred and fifty feet it is more responsive to speed variations, so it catches speed decay quickly in gusts. Below one hundred and fifty feet it becomes less responsive, deliberately, to avoid big bursts of thrust in the last moments that could destabilise the approach and lead to a long flare. At seven hundred feet the current speed target is memorised, so that even if flight management fails the speed guidance stays stable; from then on, typing a new VAPP or wind into the MCDU has no effect. And when the speed is managed, the target you follow is not a fixed VAPP but VAPP corrected by the ground speed mini function.
Ground speed mini
How the managed approach speed moves with the wind 100 110 120 130 140 150 160 kt time on final (s) 0 20 40 60 VAPP 138 kt (floor) managed target current headwind Worked example VLS 130 kt · tower headwind 24 kt VAPP = 130 + ⅓ × 24 = 138 kt (⅓ headwind: 0 to 15 kt; at least VLS + 5) GS mini = 138 − 24 = 114 kt Gust to 36 kt headwind: target = 138 + (36 − 24) = 150 kt Headwind drops to 15 kt: 138 + (15 − 24) → floor 138 kt later standard: + ⅓ of the difference max VFE next (VFE − 5 in CONF FULL) Active in the approach phase with managed speed. Uses the tower wind (PERF APPR) and the current wind from the ADIRS. Not applied to green dot, S or F.
Chapter 8 · Autothrust and Alpha Floor
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Ground speed mini uses the aircraft inertia to keep enough energy when the wind changes on the approach. Take our worked example. VLS is one hundred and thirty knots and the tower reports a headwind of twenty four knots. VAPP is VLS plus one third of the headwind, at least five and at most fifteen knots: one hundred and thirty plus eight, one hundred and thirty eight. The ground speed you should never go below is VAPP minus the tower headwind: one hundred and fourteen knots. Now a gust raises the headwind to thirty six knots. The magenta target rises by the extra twelve knots to one hundred and fifty, keeping the ground speed and so the energy. When the headwind falls to fifteen, the target cannot go below VAPP. On later standards only one third of the difference is added, and the target never exceeds VFE next.
Alpha floor
ALPHA FLOOR: TOGA thrust, automatically FAC signal at a very high α : A/THR sets TOGA regardless of the levers α above 9.5° CONF 0, 15° CONF 1 and 2, 14° CONF 3, 13° FULL Or sidestick > 14° nose up with pitch or α protection active Available from lift-off to 100 ft RA on approach FMA: A.FLOOR , then TOGA LK , in a flashing amber box To cancel: disconnect the A/THR ALPHA FLOOR: TOGA whatever the levers say A.FLOOR SRS NAV AP1 1 FD 2 A/THR while the α-floor condition lasts (also amber A FLOOR on the E/WD) TOGA LK SRS NAV AP1 1 FD 2 A/THR condition gone: TOGA thrust locked Trigger α above the threshold for the configuration, or stick > 14° nose up with α or pitch protection Threshold 9.5° CONF 0 · 15° CONF 1-2 · 14° CONF 3 · 13° FULL (reduced if decelerating) Available from lift-off to 100 ft RA on approach Cancel disconnect the A/THR (instinctive pb)
Chapter 8 · Autothrust and Alpha Floor
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Alpha floor is the autothrust protection against a very low energy state. The FAC watches the angle of attack, and when it passes a threshold that depends on the configuration, it sends a signal that makes the autothrust set TOGA thrust, wherever the levers are and whatever the autothrust was doing. The thresholds are nine and a half degrees in CONF zero, fifteen in CONF one and two, fourteen in CONF three and thirteen in CONF full, and in CONF three and full the threshold drops when the aircraft is decelerating fast. It also triggers if you pull the sidestick more than fourteen degrees nose up while pitch or angle of attack protection is active. It works from lift off down to one hundred feet on the approach. You see A FLOOR, then TOGA LK once the condition has gone, and you cancel it by disconnecting the autothrust.
Alpha floor
When alpha floor is not there Situation Alpha floor Below 100 ft RA on approach, or on the ground not available (lift-off to 100 ft RA only) Above M 0.6 (some aircraft) inhibited AP/FD TCAS mode engaged (some aircraft) inhibited while levers in CL; otherwise for 5 s SFCC 1 + FAC 2, or SFCC 2 + FAC 1 failed · both FCU channels · 1 EIU · both FMGCs lost Alternate or direct flight control law lost Engine out with slats/flaps extended · engine failure with derated takeoff lost · inhibited Instinctive disconnect pb held more than 15 s lost for the rest of the flight
Chapter 8 · Autothrust and Alpha Floor
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Know when alpha floor will not help you, because examiners love this list. It is only available from lift off down to one hundred feet radio height on the approach. On some aircraft it is inhibited above Mach point six, and with the TCAS mode engaged. It is lost after certain combinations of failures: slat flap computer one with FAC two, or slat flap computer two with FAC one, both FCU channels, a single engine interface unit, or both FMGCs. It is lost in alternate and direct law, which ties in with the flight control lessons later in the course. It is lost with an engine out once the slats or flaps are extended, and inhibited after an engine failure with a derated takeoff. And, as we saw, holding the instinctive disconnect button for more than fifteen seconds removes it for the rest of the flight.
Low energy alert
"SPEED, SPEED, SPEED" Aural "SPEED SPEED SPEED" , repeated every 5 s : thrust needed FAC computes energy from configuration, deceleration rate and flight path angle Available in CONF 2, 3 and FULL Inhibited: TOGA , below 100 ft or above 2 000 ft RA , alpha floor or GPWS, alternate or direct law, both RAs failed Comes before alpha floor when decelerating (unless α-floor is by stick deflection) Decelerating approach: which alert first? time speed / energy "SPEED SPEED SPEED" A.FLOOR gap depends on the deceleration rate Alert "SPEED SPEED SPEED", repeated every 5 s: add thrust Active CONF 2, 3 and FULL FAC uses configuration, deceleration and flight path angle Inhibited TOGA selected · below 100 ft or above 2 000 ft RA alpha floor or GPWS alert · alternate or direct law · both RAs failed
Chapter 8 · Autothrust and Alpha Floor
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
The low energy aural alert, on aircraft that have it, warns you before alpha floor. The FAC estimates the aircraft energy from the configuration, the deceleration rate and the flight path angle, and when it drops below the level from which pitch alone can no longer restore a positive flight path, you hear speed, speed, speed, repeated every five seconds. The answer is thrust. It works in CONF two, three and full, between one hundred and two thousand feet radio height. It is inhibited when TOGA is selected, when alpha floor or a ground proximity alert has triggered, in alternate or direct law, and if both radio altimeters have failed. On a decelerating approach it always comes before alpha floor, unless alpha floor is triggered by stick deflection; how much earlier depends on how fast you are decelerating.
Summary
Autothrust in one page SPEED ALT NAV AP1 1 FD 2 A/THR Levers and states Active range IDLE–CL (IDLE–MCT one engine). Armed: A/THR blue. Active: white. Levers set the maximum.
Disconnection Standard: instinctive pb or both idle. Other: FCU pb or failure, thrust lock in CL. Held 15 s: lost with alpha floor.
Modes THRUST when pitch flies speed; SPEED/MACH when pitch flies a path or no AP/FD; RETARD in autoland at 40 ft.
Protections Approach tuning below 3 200 ft, target memorised at 700 ft, GS mini. α-floor: TOGA; SPEED SPEED SPEED first.
Chapter 8 · Autothrust and Alpha Floor
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us close the auto flight chapter. The levers stay in CL from thrust reduction to touchdown, and the active range is from idle to CL, or to MCT with one engine out. Armed shows A slash THR in blue, active shows it in white, and the levers set the maximum thrust. The standard disconnection is the instinctive button or both levers to idle; anything else gives lasting warnings, and with the levers in CL, thrust lock. Hold the button for fifteen seconds and you lose the autothrust and alpha floor for the flight. The autothrust holds a thrust when pitch flies the speed, and holds the speed when pitch flies a path, and retards in an autoland flare. On the approach it is retuned, memorises the target at seven hundred feet and uses ground speed mini. Alpha floor gives TOGA, and the speed speed speed alert warns you first.