A320 Aircraft Systems · Chapter 20
Electronic Instrument System: PFD, ND and ECAM Displays Six display units, three DMCs, the switching that keeps the pictures alive, and every symbol on the PFD and ND.
SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 200 220 240 260 280 300 95 100 105 100 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 GS 420 TAS 436 240/30 TOPAS 003° 18.6 NM 1432 0 1 2 3 4 32 33 34 35 10 20 30 TOPAS CRL VOR1 BBI 24.3 ADF2 NDB PFD · ND · E/WD · SD © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to the electronic instrument system, usually just called the EIS. Everything you read in an A320 cockpit, from airspeed to an engine fire warning, is drawn on six identical screens. In this lesson we first look behind the glass: the display management computers that draw the pictures, the data concentrators and warning computers that feed them, and the switching that keeps the pictures alive when something fails. Then we read the primary flight display one area at a time: attitude, speed, altitude, heading and guidance. Finally we cover the EFIS control panel and the five modes of the navigation display. The ECAM logic behind the warnings has its own lesson next. By the end you should be able to look at any PFD or ND and explain every colour and symbol on it.
ATA 31
Our route through the EIS SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 200 220 240 260 280 300 95 100 105 100 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 PFD GS 420 TAS 436 240/30 TOPAS 003° 18.6 NM 1432 0 1 2 3 4 32 33 34 35 10 20 30 TOPAS CRL VOR1 BBI 24.3 ADF2 NDB ND 84.6 84.6 N1 % 612 615 EGT °C 94.1 N2 94.0 1150 FF 1160 KG/H FOB : 13600 S F T.O AUTO BRK MAX SIGNS ON CABIN CHECK SPLRS ARM FLAPS T.O T.O CONFIG NORMAL E/WD CRUISE TAT +19 °C SAT +18 °C 23 H 56 GW 60300 KG ENG F.USED 1530 1560 KG OIL 11.5 11.5 QT VIB N1 0.8 0.9 N2 1.2 1.3 AIR LDG ELEV AUTO 500 FT ΔP 7.9 PSI CAB V/S 0 FT/MIN CAB ALT 6800 FT CKPT FWD AFT 22 23 23 °C SD Architecture Six display units, three DMCs, two SDACs, two FWCs and how they connect.
Switching EIS DMC, ECAM/ND XFR, PFD/ND XFR and the automatic transfers.
PFD Attitude, speed, altitude, heading, guidance, deviations and flags.
EFIS CP and ND Baro, FD, LS, the option keys and the five ND modes.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is our route through chapter thirty one, the indicating system. We start with the architecture: what is behind the six screens, and which computer draws which picture. Then the switching: the selectors and pushbuttons that let you move pictures around, and the transfers that happen by themselves when a screen or a computer fails. The biggest part of the lesson is the primary flight display, which we will read area by area, with real numbers, because this is where type rating examiners like to ask about colours and thresholds. We finish with the EFIS control panel and the navigation display in its five modes. The ECAM warning logic, memos and the status page come in the next lesson, so here we only meet the ECAM screens as displays.
Cockpit arrangement
Six identical display units PFD 1 ND 1 E/WD ND 2 PFD 2 SD WARN CAUT CAUT WARN Loudspeaker Loudspeaker SWITCHING ECAM control panel Captain: PFD 1 and ND 1 First officer: ND 2 and PFD 2 glareshield: FCU, EFIS control panels, MASTER WARN / MASTER CAUT Each pilot: PFD outboard, ND inboard. Centre: E/WD above SD. Pedestal: SWITCHING and ECAM control panels.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The A320 main instrument panel carries six identical colour liquid crystal display units. Each pilot has two of them: the captain's primary flight display outboard and navigation display inboard, and the mirror image on the first officer's side, which together are called the EFIS. In the centre is the ECAM: the upper unit shows the engine and warning display, and the lower unit shows the system display. Because the units are identical, any picture can be shown on any unit, which is what makes the reconfiguration you will see later possible. On the glareshield each pilot has a MASTER WARN and a MASTER CAUT light, which are the attention getters. There is a loudspeaker on each side. Down on the pedestal you find the ECAM control panel and, just above it, the SWITCHING panel.
Architecture
DMCs, SDACs and FWCs Sensors: red warnings, flight phase, memos Sensors: amber cautions, system pages FADEC, FQI, LGCIU, FCDC, nav and AFS SDAC 1 SDAC 2 FWC 1 FWC 2 DMC 1 DMC 2 DMC 3 standby PFD 1 ND 1 E/WD SD ND 2 PFD 2 MASTER WARN / CAUT Loudspeakers: aurals red warnings go straight to the FWCs six identical LCD display units SDACs feed cautions and system data; FWCs make the alerts; DMCs draw the pictures.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three kinds of computer sit behind the screens. Two system data acquisition concentrators, the SDACs, collect data from aircraft systems. They send some of it to the display management computers, to build the system pages and engine indications, and some to the flight warning computers, to build ECAM messages and aural alerts. The two flight warning computers, the FWCs, generate every alert message, memo, aural alert and synthetic voice. Notice the important split: red warnings come from sensors wired directly to the FWCs, while amber cautions arrive through the SDACs. The FWCs also produce the radio height and decision height callouts and the landing distance and speed increments, and they drive the attention getters. Finally, three identical display management computers, the DMCs, take all this data and send it to the display units, which generate the images.
Display management computers
Three DMCs, one on standby Each DMC has one channel and can supply one PFD, one ND and both ECAM DUs at once Normally : DMC 1 drives CAPT PFD, CAPT ND and the ECAM ; DMC 2 drives F/O PFD and NDDMC 3 is on standby, ready to drive any DUDMC failure: its DUs show INVALID DATA ; the crew selects CAPT 3 or F/O 3 If DMC 1 fails, DMC 2 takes the ECAM automatically PFD 1 ND 1 E/WD ND 2 PFD 2 SD DMC 1 DMC 3 DMC 2 Normal: DMC 1 and DMC 2 drive; DMC 3 waits dashed blue: DMC 2 takes the ECAM if DMC 1 fails dotted grey: DMC 3 after CAPT 3 is selected
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Each DMC has a single channel and is powerful enough to supply one PFD, one ND and both ECAM screens at the same time. Normally, DMC 1 drives the captain's PFD and ND and both ECAM screens, while DMC 2 drives the first officer's PFD and ND. DMC 3 sits on standby. Now watch what happens if DMC 1 fails. The captain's screens show INVALID DATA. The ECAM does not go blank, because DMC 2 takes it over automatically. To recover the captain's side, the crew turns the EIS DMC selector to CAPT 3, and DMC 3 replaces DMC 1. One more subtle point for the exam: if you are already on CAPT 3 and DMC 3 then fails, DMC 2 again takes the ECAM automatically.
SWITCHING panel
EIS DMC and ECAM/ND XFR selectors The SWITCHING panel sits just above the ECAM control panel EIS DMC (centre): NORM, CAPT 3 , F/O 3 ECAM/ND XFR (right): moves the SD to the CAPT or F/O ND; ECAM ON ND appears on the lower DUWith both ECAM DUs failed , the same switch sends the E/WD to the ND PFD/ND XFR pb on each side console swaps that pilot's PFD and NDSWITCHING ATT HDG CAPT 3 NORM F/O 3 AIR DATA CAPT 3 NORM F/O 3 EIS DMC CAPT 3 NORM F/O 3 ECAM / ND XFR CAPT NORM F/O EIS DMC selector at CAPT 3 NORM DMC 1: CAPT PFD + ND and both ECAM DUs; DMC 2: F/O PFD + ND CAPT 3 DMC 3 replaces DMC 1 F/O 3 DMC 3 replaces DMC 2 ECAM / ND XFR at CAPT or F/O: the SD goes to that ND; "ECAM ON ND" on the lower DU SWITCHG PNL memo (E/WD) when: ATT HDG, AIR DATA or EIS DMC at CAPT 3 or F/O 3, or PFD/ND XFR pressed with ECAM/ND XFR at CAPT or F/O
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The SWITCHING panel is on the pedestal, just above the ECAM control panel. It has four rotary selectors. ATT HDG and AIR DATA belong to the navigation lesson. The third one, in the centre, is the EIS DMC selector: in NORM, DMC 1 and DMC 2 do their usual jobs; CAPT 3 makes DMC 3 replace DMC 1, and F/O 3 makes it replace DMC 2. On the right, the ECAM/ND XFR selector moves the system display onto the captain's or the first officer's navigation display, and the lower ECAM screen shows the words ECAM ON ND. If both ECAM screens have failed, the same switch sends the engine and warning display to the ND instead. Remember too the PFD/ND XFR pushbutton on each side console, and the SWITCHG PNL memo that reminds you a selector is not in NORM.
Display failures
Automatic and manual transfers PFD display unit fails AUTOMATIC PFD PFD on ND DU PFD DU ND DU PFD/ND XFR swaps back if wanted ND display unit fails MANUAL ND ND PFD DU ND DU ND on PFD DU PFD/ND XFR puts the ND on the PFD DU Upper ECAM DU fails AUTOMATIC E/WD E/WD on lower DU upper lower SD: ECAM/ND XFR, or hold a page pb (3 min) Both ECAM DUs fail MANUAL E/WD SD E/WD on an ND via ECAM/ND XFR upper lower Automatic: PFD to ND unit, E/WD to lower unit. Manual: PFD/ND XFR, ECAM/ND XFR, or press and hold an SD page pb (max 3 min).
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
The system protects the most important pictures automatically. If a PFD display unit fails, the PFD image moves to the ND unit by itself; turning the PFD brightness knob to OFF does the same. The pilot can press PFD/ND XFR to swap the images back and forth. If an ND unit fails, nothing is automatic: press PFD/ND XFR to put the ND image on the PFD unit. On the ECAM, the engine and warning display has priority: if the upper unit fails or is switched off, the E/WD moves to the lower unit automatically. To see a system page, use ECAM/ND XFR, or press and hold the system page pushbutton for up to three minutes. If the lower unit fails, use the same two methods. If both ECAM units fail, ECAM/ND XFR puts the E/WD on a navigation display.
Monitoring
Failure, feedback and discrepancy messages A failed DU: blank with an amber F , distorted, or INVALID DISPLAY UNIT DMC feedback check: CHECK CAPT PFD , CHECK F/O ND , CHECK EWD , CHECK SD (amber) CHECK ATT : more than 5° pitch or roll between PFDsCHECK ALT : more than 250 ft with QNH, 500 ft with STDCHECK HDG : more than 5° between PFD and ND headingsWhat a failed or doubtful display shows F INVALID DISPLAY UNIT INVALID DATA DU failed DU failed its DMC failed Side 1 / side 2 comparison (with an ECAM caution): CHECK ATT pitch or roll differ by more than 5° CHECK ALT more than 250 ft (QNH) or 500 ft (STD) CHECK HDG PFD and ND headings differ by more than 5° DMC feedback check (amber): CHECK CAPT PFD · CHECK F/O ND · CHECK EWD · CHECK SD On the ground: DU NOT MONITORED (amber) = one DMC only After a reset: SELF TEST IN PROGRESS, WAITING FOR DATA (green)
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The EIS checks itself continuously. A display unit that fails may go blank with an amber letter F, show a distorted picture, or show INVALID DISPLAY UNIT. Separately, each DMC compares what it sent with what the unit actually displays. If they disagree you get an amber feedback message such as CHECK CAPT PFD, CHECK F O ND, CHECK EWD or CHECK SD. Then there are the side one versus side two comparisons, which come with an ECAM caution. CHECK ATT means the two PFDs disagree by more than five degrees in pitch or roll. CHECK ALT appears above two hundred and fifty feet difference with QNH, or five hundred feet with standard; for example three thousand and fifty against three thousand three hundred and twenty is two hundred and seventy feet, enough to trigger it. CHECK HDG appears above five degrees.
ECAM displays
E/WD and SD at a glance 84.6 84.6 N1 % 612 615 EGT °C 94.1 N2 94.0 1150 FF 1160 KG/H FOB : 13600 S F SEAT BELTS NO SMOKING CRUISE TAT +19 °C SAT +18 °C 23 H 56 GW 60300 KG ENG F.USED 1530 1560 KG OIL 11.5 11.5 QT VIB N1 0.8 0.9 N2 1.2 1.3 AIR LDG ELEV AUTO 500 FT ΔP 7.9 PSI CAB V/S 0 FT/MIN CAB ALT 6800 FT CKPT FWD AFT 22 23 23 °C E/WD (upper) engine primary parameters fuel on board, slats and flaps feedback messages lower part: warnings, cautions and memos from the FWCs SD (lower) 12 system pages or STATUS permanent data line: TAT, SAT, UTC, gross weight The ECAM logic, colours, memos and STATUS page are the subject of the next lesson.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Before we go to the PFD, a quick look at the two ECAM screens as displays. The upper one, the engine and warning display, shows the primary engine parameters at the top, here N1, exhaust gas temperature, N2 and fuel flow, together with fuel on board and the slat and flap position, plus any feedback message. Below a horizontal line is the message area, where the flight warning computers write warnings, cautions and, when nothing is wrong, memos. The lower screen, the system display, shows one of twelve system pages, such as this CRUISE page, or the STATUS page. Along its bottom edge is a permanent data line with total and static air temperature, the time in UTC and the gross weight. We will study how these pages are chosen in the ECAM lesson.
Primary flight display
The PFD layout SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 200 220 240 260 280 300 .52 95 100 105 12000 100 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 1 Flight mode annunciator (FMA) 2 Speed scale 3 Attitude and guidance 4 Mach (above M 0.5) 5 Heading / track scale 6 Altitude and vertical speed 7 Barometric reference Radio height and ILS data appear when relevant The flight warning computers monitor the main PFD parameters: attitude, heading and altitude.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
This is the primary flight display, and it is laid out like a classic basic T. At the top is the flight mode annunciator, the FMA, with five columns that tell you what the autothrust, the vertical and lateral modes, the approach capability and the autopilot and flight directors are doing. In the middle is the attitude sphere with the guidance symbols and, close to the ground, the radio height. Speed is on the left, with the Mach number below it once you are above Mach point five. Altitude and vertical speed are on the right, with the barometric reference underneath. Heading or track runs along the bottom. Deviation scales for an ILS or a non precision approach appear around the attitude sphere when they are needed. Let us now take each area in turn.
PFD attitude
Attitude, roll scale and declutter Fixed aircraft symbol: black, outlined yellow Roll scale marks at 0, 10, 20, 30 and 45° ; yellow roll index shows the bank Pitch marks every 10°, every 2.5° from 10° down to 30° up Bank above 45° , or pitch above 25° up / 13° down : PFD declutters Green = marks: bank protection, and pitch limits at 30° up, 15° down ; amber x if lost SPEED ALT NAV AP1 1FD2 A/THR 10 10 20 20 200 220 240 260 280 300 95 100 105 12000 100 00 20 80 1 1 2 2 6 6 12 QNH 1013 33 34 35 36 01 02 03 Declutter: bank > 45°, pitch > 25° up or 13° down
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The fixed aircraft symbol is black with a yellow outline, and the outline is dimmed when you select TRK FPA, so the bird stands out. The roll scale has marks at zero, ten, twenty, thirty and forty five degrees, and the yellow roll index under it shows the bank. Pitch is marked every ten degrees, with finer marks every two and a half degrees between ten degrees nose down and thirty degrees nose up. In an unusual attitude the PFD declutters. With more than forty five degrees of bank, everything except attitude, speed, heading, altitude and vertical speed disappears, and comes back below forty degrees. The same happens above twenty five degrees nose up or thirteen degrees nose down, with large red arrows beyond thirty degrees pointing the way back. Green equal signs mark the flight control protections, and turn into amber crosses if a protection is lost.
PFD sideslip and ground symbols
Sideslip, beta target and sidestick order Sideslip index (yellow) under the roll index: lateral acceleration on ground, sideslip in flight1 cm = 0.2 g ; against its stop at 0.3 g Engine failure at take-off or go-around: index turns blue , the beta target After first engine start: white sidestick order and max deflection marks Green yaw bar on ground or below 30 ft with a localizer signal MAN TOGA SRS RWY 1FD2 A/THR 10 10 10 10 40 60 80 145 0 5 10 3 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 MAN TOGA SRS RWY TRK 1FD2 A/THR 10 10 20 20 100 120 140 160 180 200 10 15 20 14 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 On ground, engine running Engine failure at take-off white sidestick order and max deflection marks; green yaw bar sideslip index turns blue: the beta target
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The small yellow trapezoid under the roll index is the sideslip index. On the ground it shows lateral acceleration; in flight it shows sideslip computed by the FAC. One centimetre of movement is nought point two g, and it hits its stop at nought point three g. After an engine failure on take-off or go-around it turns blue and becomes the beta target. The conditions are: flaps in configuration one, two or three, an N1 above eighty per cent or a thrust lever above MCT, and the two N1s more than thirty five per cent apart. Centre the blue index under the roll index and the sideslip is exactly what gives the best performance. On the ground, after the first engine start, a white cross shows the sum of both sidestick orders inside four white corner marks of maximum deflection, and a green yaw bar helps you hold the centreline.
PFD speed scale
Speed, trend and target White scale on grey, fixed yellow reference line ; minimum indication 30 kt Speed trend : speed in 10 s ; shown above 2 kt, gone below 1 kt or if both FACs failTarget: magenta = managed (FMGC), blue = selected (FCU) Mach shown above M 0.5 Overspeed protection mark at VMO + 6 kt or MMO + 0.01 SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 260 280 300 320 340 .78 275 280 285 280 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 1 Scale and yellow reference line minimum indication 30 kt 2 Speed trend arrow speed in 10 s at this acceleration 3 Target triangle blue = selected (here 306 kt), magenta = managed 4 Red and black VMAX strip green "=" at VMO + 6 kt: overspeed protection 5 Mach number shown above M 0.5
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
The speed scale is a white scale on a grey background moving past a fixed yellow reference line, and it bottoms out at thirty knots. The yellow speed trend arrow shows the speed you will reach in ten seconds if the acceleration stays the same. Here we are accelerating at one point two knots per second, so the arrow points to about three hundred and twelve. It appears when the trend exceeds two knots, disappears below one knot, and is lost if the FACs fail. The target speed is a triangle: magenta when the FMGC manages the speed, blue when you select it on the FCU. Above the red and black VMAX strip a small green equal sign marks where overspeed protection starts: VMO plus six knots, or MMO plus nought point nought one. For a VMO of three hundred and fifty knots, that is three hundred and fifty six.
PFD speed scale
Low speed and limit strips: normal versus alternate law SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 80 100 120 140 160 180 15 20 25 20 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 80 100 120 140 160 180 15 20 25 20 00 20 80 1 1 2 2 6 6 QNH 1013 33 34 35 36 01 02 03 Pitch normal law Pitch alternate or direct law VMAX: lower end of red and black (here VFE) VFE next: amber = Target speed (magenta) VLS: top of the amber strip Alpha prot: top of the black and amber strip Alpha max: top of the red strip VMAX: lower end of red and black VFE next: amber = VLS: top of the amber strip VSW: top of the red and black strip no alpha prot or alpha max strips Alpha prot and alpha max: pitch normal law only. VSW: pitch alternate or direct law only. VMAX = lowest of VMO/MMO, VLE, VFE.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
These strips are some of the most examined items on the PFD. VLS, the lowest selectable speed, is the top of the amber strip; it keeps a margin above the stall and is inhibited from touchdown until ten seconds after lift-off. In pitch normal law you also see two protection speeds: the top of the black and amber strip is alpha prot, where the angle of attack protection becomes active, and the top of the red strip is alpha max, the highest angle of attack the aircraft can reach. In alternate or direct law those two disappear, because the protections are gone, and instead a red and black strip shows VSW, the stall warning speed, inhibited from touchdown until five seconds after lift-off. At the top, VMAX is the lowest of VMO or MMO, VLE and VFE. The amber double bar is VFE next, the limit for the next flap lever position.
PFD speed scale
Characteristic speeds and DECEL Symbol Speed When it is shown 1 V1 (entered in the MCDU) take-off; numbers at the top if off scale; gone after lift-off Cyan o VR (MCDU PERF TAKE OFF page) during take-off Target triangle V2 (entered in the MCDU) during take-off, as the speed target Green F minimum flap retraction speed flap lever in 3 or 2 Green S minimum slat retraction speed flap lever in 1 Green o (green dot) best lift/drag, engine-out speed in clean clean configuration Amber = VFE next below 15 000 ft or 20 000 ft (FAC standard) DECEL autobrake deceleration achieved on at 80 % of selected deceleration, off below 70 %
Example: autobrake selected rate 3 m/s² (illustration): DECEL appears at 2.4 m/s² and goes out below 2.1 m/s².
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the characteristic speeds you will see on the scale. V one is shown as a number one, typed into the MCDU; when it is off the scale it appears in figures at the top, and it disappears after lift-off. VR is a cyan circle from the take-off performance page, and V two is simply the speed target triangle during take-off. Once airborne, F is the minimum flap retraction speed, shown with the flap lever in three or two, and S is the minimum slat retraction speed, shown in position one. Green dot appears in clean configuration and is the best lift to drag speed, also the engine-out operating speed. VFE next appears below fifteen or twenty thousand feet depending on the FAC standard. Finally DECEL, from the brake computer, appears when the aircraft achieves eighty per cent of the selected autobrake deceleration and goes out below seventy. On a slippery runway it may never appear even though autobrake is working.
PFD altitude
Altitude scale, target and altitude alert Green digital window on a white scale; marks at round values; NEG for negative values Target: blue selected altitude; magenta for a managed constraint Window yellow within 250 ft of target; pulses yellow on approach to it, flashes amber on deviation, with a C chord C chord stops: new altitude, EMER CANC or MASTER WARN Alert inhibited: slats out with gear down selected, after G/S capture , gear locked down SPEED ALT NAV AP1 1FD2 A/THR 10 10 10 10 180 200 220 240 260 40 45 50 55 50 47 20 40 00 1 1 2 2 6 6 9 QNH 1013 33 34 35 36 01 02 03 1 Selected altitude (blue) magenta if it is a managed constraint 2 Window: green digits yellow frame within 250 ft of target 3 Vertical speed scale ±6 000 ft/min, digits in hundreds 4 Barometric reference QNH and value, or STD in a box Altitude alert: C chord, window pulses yellow or flashes amber
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Altitude is shown as a white moving scale and a green digital window. The target altitude is blue when it is the FCU selected altitude, or flight level with standard selected, and magenta when it is a flight plan constraint the FMGC will honour in a managed mode. If it is off the scale, the value appears above or below. The altitude alert comes from the flight warning computers comparing the ADIRS altitude with the FCU altitude. Approaching the target the window pulses yellow and a C chord sounds; once within two hundred and fifty feet the frame is steady yellow. If you then drift away by more than two hundred and fifty feet, the window flashes amber with a continuous C chord. Select a new altitude, press EMER CANC or a MASTER WARN light to stop the chord. The alert is inhibited with slats out and gear selected down, after glide slope capture, or with the gear locked down.
PFD radio height and V/S
Radio height, ground reference and vertical speed Radio height shown below 2 500 ft ; amber below DH + 100 ft (or 400 ft with no DH) At DH: DH flashes amber 9 s , then steady Red ground ribbon below 570 ft ; brown landing elevation in phases 7 and 8 (not STD) V/S digits in hundreds of ft/min; hidden below 200 ft/min V/S amber: > 6 000, or descending > 2 000 (RA 1 000-2 500), > 1 200 (RA below 1 000) Radio height (DH 200 ft entered) 1200 above DH + 100 280 below DH + 100 190 DH at DH: "DH" amber No DH (or both FMGCs failed): amber at 400 ft and below Vertical speed turns amber when: more than 6 000 ft/min climb or descent, any height descending > 2 000 ft/min with radio height 1 000 to 2 500 ft descending > 1 200 ft/min with radio height below 1 000 ft Example: 1 500 ft/min down at 800 ft RA: amber. The same rate at 1 800 ft RA: green. Inertial V/S lost: barometric V/S, amber box round the digits.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Radio height appears below two thousand five hundred feet. With a decision height of two hundred feet entered, the number is green down to three hundred feet, which is DH plus one hundred, and amber below that. At two hundred the letters DH flash amber for nine seconds and then stay. With no DH, or both FMGCs failed, the change to amber happens at four hundred feet. Below five hundred and seventy feet a red ribbon driven by the radio altimeter rises up the altitude scale, and at touchdown its top sits in the middle of the window. Vertical speed is normally inertial and barometric; if the inertial part is lost it becomes purely barometric with an amber box. The digits are in hundreds of feet per minute. Fifteen hundred feet per minute down at eight hundred feet radio height turns amber; the same rate at eighteen hundred feet stays green.
PFD heading and FPV
Heading scale and the flight path vector Yellow line on a moving scale: magnetic heading; TRUE above 73° N or below 60° S Blue selected heading/track index; small green track diamond TRK FPA selected: the green bird shows track and flight path angleWith FDs on, the flight path director replaces the FD bars Use the bird on stabilised segments , not in dynamic manoeuvres SPEED FPA -3.0 TRK AP1 1FD2 A/THR 10 10 10 10 120 140 160 180 200 250 20 25 30 20 25 00 20 80 1 1 2 2 6 6 8 QNH 1013 34 35 36 01 02 03 Bird = track and flight path angle; drift = track minus heading
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Along the bottom, a white scale moves past a fixed yellow line to show magnetic heading. Above seventy three degrees north or below sixty degrees south, TRUE appears and the scale shows true heading. The blue index is the heading or track set on the FCU, and the small green diamond is the actual track. The angle between heading and track is your drift. When you select TRK FPA on the FCU, the flight path vector appears: a green symbol called the bird. Its sideways position shows the track, and its height on the pitch scale shows the flight path angle relative to the ground. With flight directors on, a flight path director replaces the crossed bars. The bird is the right reference on stabilised segments, such as a non precision approach or a visual circuit, but because it lags in dynamic manoeuvres you should not chase it there.
PFD guidance
Flight director bars, yaw bar and tailstrike limit PFD 1 shows FD 1 ; if FD 1 fails it shows FD 2 and "FD2" flashes in the FMA FD bars flash 10 s : reversion to HDG V/S, FCU altitude change in ALT*, LOC or G/S loss in LAND, first AP/FD engagement Green yaw bar below 30 ft with LOC: RWY, FLARE and ROLL OUT FD bars leave at touchdown in ROLL OUT Tailstrike pitch limit appears at 400 ft RA on landingSPEED V/S +1500 HDG AP1 1FD2 A/THR 10 10 10 10 200 220 240 260 280 300 75 80 85 10000 80 00 20 80 1 1 2 2 6 6 15 QNH 1013 33 34 35 36 01 02 03 HDG V/S reference: green FD crossed bars
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are two kinds of flight director symbol, depending on the basic reference you choose. With HDG V/S, the PFD shows green crossed bars; with TRK FPA, the flight path director that we just met. Normally PFD 1 shows the orders of flight director one. If FD 1 fails, PFD 1 shows FD 2 orders automatically, and FD2 flashes for a few seconds in the right column of the FMA. The bars flash for ten seconds to catch your eye: after a reversion to HDG V/S, if the FCU altitude is changed during altitude capture, if LOC or glide slope is lost in LAND, and at the first autopilot or flight director engagement. Below thirty feet with a localizer, a green yaw bar guides you on the runway centreline. And on landing, from four hundred feet radio height, a tailstrike pitch limit symbol shows the maximum pitch before the tail could touch.
PFD deviations
ILS and non-precision deviations LS pb pressed: scales; magenta indexes when signals valid; 1 dot = 0.8° LOC, 0.4° G/S LOC scale flashes > 1/4 dot for 2 s (15-1 000 ft, CAT 2/3, LOC/LAND/FLARE); G/S > 1 dot above 100 ft Markers: OM blue, MM amber, IM white LS flashes amber: APPR armed but LS pb not pressedNon-precision: V/DEV 100 ft per mark (±200 ft); L/DEV 0.1 NM per mark (±0.2 NM) SPEED G/S LOC CAT3 DUAL AP1+2 1FD2 A/THR 10 10 10 10 100 120 140 160 180 15 20 25 18 00 20 80 1 1 2 2 6 6 7 QNH 1009 24 25 26 27 28 29 IBLR 109.50 7.4NM OM 1650 One dot: 0.8° on LOC, 0.4° on G/S
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Press the LS pushbutton on the EFIS control panel and the deviation scales appear; the magenta diamonds appear once the localizer and glide slope signals are valid. One dot is nought point eight degrees on the localizer and nought point four degrees on the glide slope. On a CAT two or three approach, between fifteen and one thousand feet, the localizer scale flashes if you are more than a quarter of a dot off for two seconds; the glide slope scale flashes above one dot, above one hundred feet. OM shows in blue, MM in amber and IM in white. If you arm APPR without pressing LS, an amber LS flashes to remind you. On a non precision approach, the vertical deviation scale has marks of one hundred feet, up to two hundred, and on some aircraft a lateral scale of nought point one nautical miles per mark. If LS is pressed, the ILS deviations take priority and V/DEV flashes amber.
PFD flags
PFD flags: what failed Flag Meaning ATT (red)all attitude data lost: the whole sphere is cleared SPD , ALT , HDG , V/S , MACH (red)that information has failed SPD LIM (red)both FACs inoperative, or dual flap/slat channel failure: VLS, S, F, green dot, trend, VMAX, VFE next, VSW lost FD (red)both FMGCs failed, or both FDs disengaged with FD pb ON and attitude valid FPV (red)drift or flight path angle invalid in TRK FPA RA (red)both radio altimeters failed SI (red)sideslip lost, or a reverser deployed in flight V1 INOP (red)V1 signal not valid; the only flag that does not flash
All flags flash for 9 s, then stay steady, except V1 INOP, which is steady from the start.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
When a parameter is lost, the PFD replaces it with a flag, normally in red. ATT is the big one: with all attitude data lost, the whole sphere is cleared and only the flag remains. SPD, ALT, HDG, V/S and MACH simply mean that information has failed. SPD LIM is worth learning well: it appears when both FACs are lost, or with a dual flap and slat channel failure, and with it you lose VLS, S, F, green dot, the speed trend, VMAX, VFE next and VSW. So you fly with no speed limit information at all. FD appears if both FMGCs fail. FPV means the bird cannot be computed. RA means both radio altimeters have failed. SI means the sideslip is lost or a reverser has deployed in flight. Every flag flashes for nine seconds and then stays steady, except V1 INOP, which is steady.
Glareshield
The EFIS control panel QNH 1013 in Hg hPa PULL STD FD LS CSTR WPT VOR.D NDB ARPT LS VOR NAV ARC PLAN ROSE 10 20 40 80 160 320 1 ADF VOR OFF 2 ADF VOR OFF 1 Baro window and knob turn: QNH; pull: STD; push: QNH; ring: hPa or inHg 2 FD pb FD bars (or FPD) on this PFD 3 LS pb ILS scales, deviations and data on this PFD 4 Option pbs: CSTR, WPT, VOR.D, NDB, ARPT extra data on the ND, one at a time 5 Mode and range selectors ROSE LS/VOR/NAV, ARC, PLAN; 10 to 320 NM 6 ADF/VOR switches 1 and 2 bearing pointers and navaid data on the ND QNH 745 to 1 100 hPa (22.00 to 32.48 inHg) on most aircraft. Mode or range data lost: ROSE NAV, 80 NM by default.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Each pilot has an EFIS control panel on the glareshield. On the left, the barometric window and knob: the outer ring selects hectopascals or inches of mercury, which the PFD does not show; turning the knob sets the QNH; pulling it selects standard and pushing it returns to QNH. At power-up the reference is QNH ten thirteen, or twenty nine ninety two. Below are the FD pushbutton, which shows or hides the FD bars or flight path director on your PFD, and the LS pushbutton, which shows the landing system scales and data. On the right, the mode and range selectors drive your ND, from ten to three hundred and twenty nautical miles. Across the top, five option keys, CSTR, WPT, VOR D, NDB and ARPT, add data to the ND, one at a time. At the bottom, the ADF VOR switches select bearing pointers one and two.
Navigation display
ROSE NAV and ARC modes GS 420 TAS 436 240/30 TOPAS 003° 18.6 NM 1432 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 20 TOPAS CRL VOR1 BBI 24.3 ADF2 NDB GS 420 TAS 436 240/30 TOPAS 003° 18.6 NM 1432 0 1 2 3 4 32 33 34 35 10 20 30 TOPAS CRL VOR1 BBI 24.3 ADF2 NDB ROSE NAV: full 360°, aircraft in the centre ARC: forward 90° sector only Rings: ROSE NAV ¼ and ½ of the range; ARC ¼, ½ and ¾. Weather radar in every mode except PLAN.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
The navigation display has five modes: ROSE LS, ROSE VOR, ROSE NAV, ARC and PLAN. ROSE NAV and ARC give the same information, but ARC shows only the forward ninety degree sector, at a bigger scale. The yellow aircraft symbol points at a yellow lubber line on a moving white compass rose. Top left, in green, are ground speed and true airspeed from the ADIRS, and the wind, both as numbers and as a green arrow referenced to true north; the arrow only appears above two knots. Top right is the TO waypoint: its name, the track and distance to go, and the estimated time of arrival if you flew direct at the current ground speed. In ROSE NAV, the inner ring is a quarter of the selected range and the compass ring is half. In ARC, the arcs are at a quarter, half and three quarters. VOR and ADF data sit in the bottom corners.
Navigation display
ROSE LS and ROSE VOR ROSE LS: magenta ILS course pointer; default course 360° if none entered LOC bar flashes beyond 1/4 dot (0.2°) above 15 ft; G/S beyond 1 dot above 100 ft ILS 1 on PFD 1 and ND 2 ; ILS 2 on PFD 2 and ND 1ROSE VOR: cyan course pointer and deviation bar; 1 dot = 5° ; TO/FROM arrow VOR data white, ADF data green; M = tuned on MCDU, R = tuned on RMP GS 420 TAS 436 240/30 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 10 ILS1 109.50 CRS 270° IBLR VOR1 BBI 24.3 ADF2 NDB GS 420 TAS 436 240/30 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 10 VOR1 113.60 CRS 300° BBI VOR1 BBI 24.3 ADF2 NDB ROSE LS ROSE VOR ILS: magenta course, ±2 dots 1 dot = 0.8° LOC, 0.4° G/S VOR: cyan course and bar 1 dot = 5°; beyond 10° stays on outer dot Cross-side: ILS 1 on PFD 1 and ND 2 ILS 2 on PFD 2 and ND 1
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
ROSE LS turns the ND into a big ILS indicator. The magenta course pointer points at the selected ILS course, which defaults to three six zero if none was entered. The localizer bar moves across a scale of two dots each side, each about nought point eight degrees, and the glide diamond moves on a vertical scale with nought point four degrees per dot. A neat cross check is built in: ILS receiver one feeds PFD one and ND two, and ILS two feeds PFD two and ND one, so comparing your PFD with your own ND compares the two receivers. ROSE VOR looks similar but in cyan: each dot is five degrees, beyond ten degrees the bar stays on the outer dot, and an arrow on the bar shows TO or FROM. In the bottom corners, VOR data is white and ADF data green, with M for a navaid tuned on the MCDU and R for one tuned on the RMP.
Navigation display
PLAN mode and the flight plan colours PLAN: north up , centred on the map reference point , scrolled on the MCDU No navaid data or bearing pointers; no terrain, weather or traffic Active plan green (TO waypoint white ); missed approach blue ; alternate dashed blue Secondary plan white ; temporary plan dotted yellow Navaids: green in the plan, white if TO, blue if tuned, magenta as an option GS 420 TAS 436 240/30 TOPAS 048° 18.6 NM 1432 N E S W LFPG PG270 TOPAS CRL BUBLI North up, centred on the map reference point (the waypoint on line 2 of the MCDU F-PLN page)
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
PLAN mode is a static, north-up map of the flight plan, centred on the map reference point, which is the waypoint on the second line of the MCDU flight plan page. Scroll the MCDU and the map moves. The yellow aircraft symbol is placed at the FMGS position and points along the true track. PLAN shows no navaid data or bearing pointers, and no terrain, weather or traffic. Now the line colours, which apply in ARC and ROSE NAV too. The active flight plan is a solid green line, with the TO waypoint in white and later waypoints in green. A missed approach is solid blue, the route to the alternate dashed blue, the secondary flight plan solid white, and a temporary revision dotted yellow until you insert it. Navaids are green in the plan, white when TO, blue when tuned, and magenta when shown as an option.
Navigation display
ND messages, chrono and the cockpit clock Message or control Meaning MODE CHANGE / RANGE CHANGE EFIS CP and onside FMGC disagree, or the DMC is drawing a new page (MODE has priority) MAP NOT AVAIL MODE or RANGE CHANGE for more than 6 s, FMGC failed, or invalid aircraft position OFFSIDE FM CONTROL / SET OFFSIDE RNG/MODE the other FMGC supplies this ND; with one FMGC failed, set the same range and mode on both sides GPS PRIMARY / GPS PRIMARY LOST GPS primary available (clear with MCDU CLR) / not available HDG flagheading lost: rose, arc and symbols disappear; flag flashes 9 s TERR ON ND terrain replaces weather (not in PLAN); shown automatically on a terrain alert CHRONO pbstart on the onside ND, then freeze, then reset Cockpit clock UTC, elapsed time and chrono; battery hot bus supply; time to the FMGCs, CFDIU and FDIU
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
26
e-books by eatpl.in · © 2026 · Do not copy or distribute
The ND talks to you through messages in its centre. MODE CHANGE or RANGE CHANGE means the selection on your EFIS control panel and the mode or range coming from your FMGC do not agree, or the DMC is still drawing the new page. If that lasts more than six seconds, or the FMGC fails or gives an invalid position, you get MAP NOT AVAIL. OFFSIDE FM CONTROL means the other FMGC is driving your ND; with one FMGC failed, SET OFFSIDE RNG MODE asks you to match both sides. GPS PRIMARY and GPS PRIMARY LOST report the GPS state. If heading fails the rose disappears and a HDG flag flashes. TERR ON ND swaps the weather picture for terrain, and terrain appears by itself on an alert. Finally, the chrono button starts, freezes and resets a chrono on your ND, and the independent cockpit clock, with a direct battery supply, sends time to the FMGCs and recorders.
Summary
The EIS on one page SPEED G/S LOC CAT3 DUAL AP1+2 1FD2 A/THR 10 10 10 10 100 120 140 160 180 5 10 15 11 00 20 80 1 1 2 2 6 6 7 QNH 1013 33 34 35 36 01 02 03 IBLR 109.50 7.4NM 900 GS 420 TAS 436 240/30 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 10 ILS1 109.50 CRS 270° IBLR VOR1 BBI 24.3 ADF2 NDB 84.6 84.6 N1 % 612 615 EGT °C 94.1 N2 94.0 1150 FF 1160 KG/H FOB : 13600 S F LDG LDG GEAR DN SIGNS ON CABIN CHECK SPLRS ARM FLAPS FULL LDG INHIBIT CRUISE TAT +19 °C SAT +18 °C 23 H 56 GW 60300 KG ENG F.USED 1530 1560 KG OIL 11.5 11.5 QT VIB N1 0.8 0.9 N2 1.2 1.3 AIR LDG ELEV AUTO 500 FT ΔP 7.9 PSI CAB V/S 0 FT/MIN CAB ALT 6800 FT CKPT FWD AFT 22 23 23 °C Hardware 6 identical LCD DUs, 3 DMCs, 2 SDACs, 2 FWCs. Red warnings straight to the FWCs.
DMCs DMC 1: CAPT + ECAM; DMC 2: F/O; DMC 3 standby. DMC 1 fails: DMC 2 takes ECAM automatically.
Transfers Auto: PFD to ND unit, E/WD to lower unit. Manual: PFD/ND XFR, ECAM/ND XFR, hold a page pb 3 min.
Discrepancies CHECK ATT 5°, CHECK ALT 250 ft (QNH) or 500 ft (STD), CHECK HDG 5°.
Speed scale Trend 10 s. Alpha prot and max in normal law; VSW in alternate/direct. VMAX = lowest of VMO/MMO, VLE, VFE.
Altitude Alert C chord, 250 ft window. RA from 2 500 ft, amber below DH + 100 (400 ft without DH).
Guidance FD bars or bird/FPD. LOC 0.8°, G/S 0.4° per dot. Flags flash 9 s, V1 INOP steady.
ND ROSE LS, VOR, NAV, ARC, PLAN. ILS 1 on PFD 1 and ND 2. Green active plan, white TO waypoint.
Chapter 20 · Electronic Instrument System: PFD, ND and ECAM Displays
27
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. Six identical display units are fed by three DMCs, and the DMCs and flight warning computers get their data through two SDACs, except red warnings, which go straight to the FWCs. DMC 1 drives the captain's side and the ECAM, DMC 2 the first officer's side, and DMC 3 waits; lose DMC 1 and DMC 2 takes the ECAM automatically. A failed PFD unit or a failed upper ECAM unit is handled automatically; everything else uses PFD/ND XFR, ECAM/ND XFR or a held system page button. Remember the thresholds five degrees, two hundred and fifty or five hundred feet, and five degrees. On the speed scale, alpha prot and alpha max belong to normal law and VSW to the other laws. And on the ND, five modes, with ILS one feeding PFD one and ND two. Now try the quiz.