Air Law · Chapter 4
Airworthiness of Aircraft Who certifies that an aircraft is fit to fly, how it stays that way, and what happens when it is not.
C of A © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter four is about airworthiness: whether an aircraft is fit to fly. We follow an aircraft type from its design to its daily maintenance, look at the certificate of airworthiness and what it records, see how airworthiness is kept up over the aircraft’s life, and learn when the certificate stops being valid.
Chapter roadmap
What this chapter covers 01
From design to delivery Annex 8 and Annex 6, the type certificate, and the certificate of airworthiness.
02
Staying airworthy Continuing airworthiness, directives, maintenance and release, and the MEL.
03
When it is not airworthy When the certificate is suspended, and the special flight permit.
Chapter 4 · Airworthiness of Aircraft
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are three parts. First, from design to delivery: Annex 8, the type certificate and the certificate of airworthiness. Second, how an aircraft stays airworthy: continuing airworthiness, airworthiness directives, maintenance and release to service, and the minimum equipment list. Third, what happens when an aircraft is no longer airworthy.
Airworthiness
Fit to fly, in law and in fact Airworthy : the aircraft, engine, propeller or part matches its approved design and is safe to operate Annex 8 covers airworthiness from the engineering side; Annex 6 from the operational sideAnnex 8’s detailed design standards apply to multi-engine aeroplanes over 5700 kg carrying passengers, cargo or mail internationally Each state writes its own detailed airworthiness code; ICAO sets the minimum Modern designs add security features : strengthened cockpit door, a least-risk bomb location approved design safe condition BOTH = airworthy Definition
Two conditions, both needed It must match its approved design and be in a state where it can be operated safely . Either one failing means it is not airworthy.
Annex 8 engineering Annex 6 operations Two annexes
Annex 8 vs Annex 6 Annex 8 treats airworthiness as an engineering question; Annex 6 as a question of how the aircraft is operated .
Chapter 4 · Airworthiness of Aircraft
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aircraft, engine, propeller or part is airworthy when it matches its approved design and is in a state where it can be operated safely. Both conditions are needed. Annex 8 treats airworthiness as an engineering question, while Annex 6 treats it as a question of how the aircraft is operated; the two work together. Annex 8’s detailed design standards currently apply to multi-engine aeroplanes over 5700 kilograms that carry passengers, cargo or mail internationally. Each state writes its own detailed airworthiness code, and ICAO sets the minimum. Newer designs must also include security features, such as a strengthened cockpit door and a least-risk bomb location.
01
From design to delivery Four steps, three states and two certificates.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: from design to delivery, in four steps, involving three states and two certificates.
The life of a type
Who certifies what, from drawing board to daily flying 1 · State of Design issues the type certificate prototype: permit to fly 2 · State of Manufacture oversees production 3 · State of Registry issues each certificate of airworthiness 4 · Operator keeps it airworthy: maintenanceType certificate Issued by the State of Design when the type meets the airworthiness requirements. Defines and approves the design.
Before certification While it is being tested, the prototype flies under a permit to fly from its own state.
Certificate of airworthiness Issued by the State of Registry to each individual aircraft that conforms to the type and is safe.
Chapter 4 · Airworthiness of Aircraft
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the life of an aircraft type. First, the State of Design: when the type meets the airworthiness requirements, it issues a type certificate, which defines the design and approves it. While the prototype is being tested it flies under a permit to fly. Second, the State of Manufacture oversees the production of each aircraft. Third, the State of Registry issues each individual aircraft its own certificate of airworthiness, once it conforms to the type and is in a safe condition. And fourth, the operator keeps the aircraft airworthy through maintenance, under the watch of the State of Registry.
C of A
One certificate per aircraft Issued or validated by the State of Registry ; in India by DGCA on the owner’s or operator’s application Shows the nationality and registration marks , manufacturer and model , serial number and category Must be carried on board , and its conditions met (Rule 15) Other states recognise it if it meets at least ICAO minimum standards (Article 33) A special C of A covers aircraft in restricted categories CERTIFICATE OF AIRWORTHINESS Nationality and registration VT-EAT Manufacturer and model Airbus A320 Aircraft serial number MSN 1234 Category Normal · public transport Issued by DGCA, India carried on board
Chapter 4 · Airworthiness of Aircraft
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Each aircraft has its own certificate of airworthiness. It is issued, or a foreign one validated, by the State of Registry; in India, by DGCA on the application of the owner or operator, once DGCA is satisfied that the aircraft is airworthy. ICAO’s standard form shows the nationality and registration marks, the manufacturer and model, the aircraft’s serial number and its category. It must be carried on board, and its conditions must be met. Under Article 33, other states recognise it, provided it was issued to at least ICAO’s minimum standards. Aircraft in restricted categories receive a special certificate of airworthiness instead.
02
Staying airworthy Airworthiness is not a one-time stamp.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: staying airworthy, because airworthiness is not a one-time stamp.
Continuing airworthiness
Keeping it fit, every day The State of Registry judges whether an aircraft is still airworthy The certificate stays valid only while the aircraft is inspected and maintained as that state requires The State of Design runs a structural integrity programme, including corrosion control , for aeroplanes over 5700 kg Mandatory fixes reach operators as airworthiness directives Faults and defects are reported and tracked; in India an airworthiness review certificate confirms the review each year Licensed engineers inspect, maintain, certify release State of Registry decides it is still airworthy Airworthiness directives mandatory fixes, from the State of Design Defect reports faults and malfunctions reported
Chapter 4 · Airworthiness of Aircraft
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Airworthiness has to be kept up. It is the State of Registry that judges whether an aircraft is still airworthy, and the certificate stays valid only while the aircraft is inspected and maintained as that state requires. The State of Design runs a structural integrity programme, including corrosion control, for aeroplanes over 5700 kilograms, and it issues mandatory fixes, which reach operators as airworthiness directives. Faults, malfunctions and defects are reported and tracked. In India the certificate of airworthiness is backed by an airworthiness review certificate, which confirms the review each year. Older notes give fixed validity periods by aircraft age; current practice ties validity to this annual review.
Maintenance
Repairs, release and flying with a fault Any modification or repair affecting safety needs DGCA approval , unless it is the manufacturer’s approved scheme (Rule 52) After maintenance, a licensed engineer or approved organisation signs a certificate of release to service The MMEL is the master list for the type; the operator’s MEL is approved by the authority and never less strict An inoperative item allowed by the MEL is placarded and entered in the technical log The flight manual gives the approved limits; if speed limits are in Mach, a Machmeter is required MMEL the type’s master list MEL operator’s list, approved Defect deferred placard + tech logINOP Placarded, entered in the log Mach limits: a Machmeter is required
Chapter 4 · Airworthiness of Aircraft
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Any modification or repair that affects safety needs DGCA’s prior approval, unless it follows the manufacturer’s approved scheme; that is Rule 52. After maintenance, a licensed engineer or an approved organisation signs a certificate of release to service. Sometimes an aircraft may fly with something not working. The master minimum equipment list, the MMEL, lists what may be inoperative for the type; each operator writes its own minimum equipment list, the MEL, which the authority approves and which can never be less strict than the master list. An inoperative item allowed by the MEL is placarded and entered in the technical log. And the flight manual sets out the approved limits; if the limiting speeds are given as a Mach number, the aircraft must have a Machmeter.
03
When it is not airworthy When the certificate stops counting, and the one exception.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: when the certificate stops counting, and the one exception.
Rule 55
When the certificate is suspended It is deemed suspended when the aircraft stops meeting maintenance or operating requirements, is modified or repaired without approval , suffers major damage or develops a major defect DGCA may also suspend or cancel it if there is reasonable doubt about the safety of the aircraft or its type While suspended, the aircraft must not fly After damage, the State of Registry judges whether it is still airworthy DGCA may issue a special flight permit , for example to fly to a repair base SUSPENDED Special flight permit one flight, on conditions, to the repair base Repair base
Chapter 4 · Airworthiness of Aircraft
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Under Rule 55 the certificate of airworthiness is deemed suspended, automatically, when the aircraft stops meeting the requirements for its maintenance or operation, is modified or repaired without approval, suffers major damage, or develops a major defect that would affect safety. DGCA may also suspend or cancel it if there is reasonable doubt about the safety of the aircraft or of its type. While the certificate is suspended the aircraft must not fly. After damage it is the State of Registry, not the manufacturer or the State of Design, that judges whether the aircraft is still airworthy. The one exception is a special flight permit, which DGCA may issue on application, for example to fly the aircraft to a repair base under set conditions.
Summary
What to take into the exam approved design safe condition BOTH = airworthy Airworthy Conforms to approved design and is in a safe condition. Annex 8 = engineering; Annex 6 = operations.
TYPE CERT State of Design C of A State of Registry one per aircraft Certificates Type certificate: State of Design. C of A: State of Registry (DGCA in India), carried on board.
Over 5700 kg Annex 8 design standards: multi-engine aeroplanes over 5700 kg. Structural integrity and corrosion: State of Design.
AD directives are mandatory Continuing State of Registry decides continued airworthiness. ADs are mandatory. Annual review certificate in India.
RELEASE signed by a licensed engineer Maintenance Safety mods need DGCA approval. Release to service by licensed engineer. MEL never less strict than MMEL.
C of A SUSPENDED special permit Suspended Unapproved change, major damage or major defect. No flight, except under a special flight permit.
Chapter 4 · Airworthiness of Aircraft
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six things to take into the exam. Airworthy means conforming to the approved design and in a safe condition; Annex 8 is the engineering side and Annex 6 the operational side. The type certificate comes from the State of Design, and the certificate of airworthiness from the State of Registry, DGCA in India, and it is carried on board. Annex 8’s design standards apply to multi-engine aeroplanes over 5700 kilograms, and the structural integrity and corrosion programme belongs to the State of Design. The State of Registry decides continued airworthiness, airworthiness directives are mandatory, and India adds an annual airworthiness review. Safety-related modifications need DGCA approval, a licensed engineer releases the aircraft to service, and the MEL is never less strict than the MMEL. And the certificate is suspended by an unapproved change, major damage or a major defect, with no flight allowed except under a special flight permit.