Air Law · Chapter 20
Communications Radiotelephony the ICAO way: message priority, numbers and call signs, read-back, standard words, distress and urgency, weather broadcasts, air reports and radio bands.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter twenty is about communications: how pilots and controllers talk to each other by radio, from Annex ten, Doc forty-four forty-four and the AIP India. We look at the priority of messages, how numbers and call signs are spoken, what must be read back, the standard words and phrases, distress and urgency, weather broadcasts and air reports, and the radio frequency bands aviation uses.
Priority
Which message goes first Distress (MAYDAY): serious danger now, help needed at onceUrgency (PAN PAN): a safety concern without immediate danger; PAN PAN MEDICAL for medical transportsThen direction finding , flight safety , meteorological and flight regularity messages Some abbreviations are said as letters, not in the phonetic alphabet: ILS, QNH, RVR Distress traffic stays on the frequency it began on unless moving would help 1 Distress MAYDAY MAYDAY MAYDAY 2 Urgency PAN PAN · PAN PAN MEDICAL 3 Direction finding bearings, headings to steer 4 Flight safety clearances, position reports 5 Meteorological weather information 6 Flight regularity company business
Chapter 20 · Communications
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Radio messages have an order of priority. First come distress messages, starting with MAYDAY, when an aircraft faces serious danger right now and needs help straight away. Next are urgency messages, starting with PAN PAN, for a safety concern that is not yet an immediate danger, including PAN PAN MEDICAL for medical transports. Then come messages about direction finding, flight safety messages such as clearances and position reports, meteorological messages, and finally flight regularity messages, such as company business. A few common abbreviations, such as ILS, QNH and RVR, are spoken as letters rather than with the phonetic alphabet. And distress traffic normally stays on the frequency where it started, unless moving to another would give better help.
Phraseology
How numbers are spoken Item Example Spoken Digits 3 · 4 · 5 · 9 TREE · FOWer · FIFE · NINer Flight level FL180 flight level WUN AIT ZERO Heading 080 heading ZERO AIT ZERO Wind 020° 15 kt wind ZERO TOO ZERO degrees WUN FIFE knots QNH 1027 QNH WUN ZERO TOO SEVen Frequency 126.35 WUN TOO SIX DAY-SEE-MAL TREE FIFE Altitude 2500 ft TOO TOUSAND FIFE HUNDRED feet Time 0920 TOO ZERO (minutes past the hour), UTC
3 → TREE 4 → FOWer 5 → FIFE 9 → NINer special digits 126.35 decimal = DAY-SEE-MAL 2500 ft → TOO TOUSAND FIFE HUNDRED time: minutes past, UTC
Chapter 20 · Communications
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Numbers are spoken carefully to avoid mistakes. Most digits are said one at a time, with special pronunciations for three, four, five and nine: TREE, FOWer, FIFE and NINer. Flight levels, headings, wind directions, pressure settings and frequencies are given digit by digit, so flight level one eight zero is flight level WUN AIT ZERO, and QNH one zero two seven is QNH WUN ZERO TOO SEVen. In a frequency the decimal point is DAY-SEE-MAL. Altitudes in whole hundreds and thousands are spoken in words, for example TOO TOUSAND FIFE HUNDRED feet. Time is normally given as the minutes past the hour, or with the hour as well when there could be confusion, in UTC, and time checks are given to the nearest half minute.
Call signs
Aircraft and ground station call signs Registration VTEJP , or with the type: CESSNA VTEJP. Abbreviated: VJP or CESSNA JP.
Operator + registration AIRINDIA TEJP. Abbreviated: AIRINDIA JP.
AIRINDIA 809 no short form Operator + flight number AIRINDIA 809. No abbreviated form.
V-JP, ... ..., V-JP ATC first, then you When to abbreviate Only after the ground station has done so, and when no confusion is likely.
HEAVY SUPER first call to each unit Heavy and Super Add HEAVY (or SUPER for the A380) after the call sign on first contact with each unit.
CONTROL APPROACH TOWER GROUND DELIVERY RADAR INFORMATION place + function Ground stations CONTROL, APPROACH, TOWER, GROUND, DELIVERY, RADAR, INFORMATION, RADIO, APRON, HOMER, FLOW.
Chapter 20 · Communications
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Aircraft call signs take one of three forms. The first is the registration, such as V T E J P, perhaps preceded by the type; it can be shortened to the first character and at least the last two, such as Victor Juliett Papa. The second is the operator’s telephony designator with the last four characters of the registration, shortened to the designator and at least the last two. The third is the operator’s designator with the flight number, such as Air India eight zero nine, which has no shortened form. You abbreviate only after the ground station has done so and when there is no chance of confusion. Aircraft in the heavy category add the word HEAVY after the call sign on first contact with each unit, and the A three eighty adds SUPER. Ground stations are named by place and function: CONTROL for an area centre, APPROACH, TOWER, GROUND, DELIVERY, RADAR, INFORMATION for flight information, RADIO for an aeronautical station, APRON, HOMER for direction finding, and FLOW.
Read-back
What must be read back route clearance route clearance always read back Always ATC route clearances .
HOLD SHORT line up · land cross · backtrack Runway Any clearance to go onto, use, cross or stay off a runway: line up, land, depart, hold short , cross, backtrack.
RWY 27 QNH 1013 SQUAWK 4521 FL 180 HDG 090 SPEED 250 TL 150 every number that matters Numbers Runway in use , QNH/QFE , squawk , any level, heading or speed , and the transition level (even from ATIS).
traffic information... VT-EJP call sign is enough Other items May be acknowledged with the call sign or a short read-back.
QNH 1012 NEGATIVE I SAY AGAIN 1013 controller corrects it Wrong read-back The controller says NEGATIVE I SAY AGAIN and repeats the correct version.
Changing frequency Normally on ATC instruction; in controlled airspace get permission before changing.
Chapter 20 · Communications
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Some items must always be read back, so the controller can hear that you have them right. Read back every route clearance; anything that lets you onto a runway or keeps you off it, whether to line up, land, depart, hold short, cross, taxi along or backtrack; and the numbers that matter: which runway is in use, the pressure setting, your squawk, any level, heading or speed you are given, and the transition level, even if you heard it on ATIS. Other information can be acknowledged with your call sign or a shortened read-back. If you read something back wrongly, the controller says NEGATIVE I SAY AGAIN and gives the correct version. Frequency changes are normally made when the controller tells you; if you need to change without being told, tell the station first, and in controlled airspace get permission before you change.
Phraseology
Standard words and phrases Word Meaning ACKNOWLEDGE Tell me you have received and understood this message AFFIRM / NEGATIVE Yes / No, or permission not granted, or that is not correct ROGER I have received all of your last transmission (never a yes or no) WILCO I understand your message and will comply STANDBY Wait and I will call you; neither approval nor refusal SAY AGAIN Repeat all, or the part named, of your last transmission CORRECTION An error was made; the correct version is… WORDS TWICE Communication is difficult: send, or I will send, each word twice READ BACK Repeat all or part of this message back to me exactly
ROGER received, nothing more WILCO will comply STANDBY wait: not yes, not no GO AHEAD is no longer used
Chapter 20 · Communications
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
A small set of standard words has exact meanings. ACKNOWLEDGE asks you to say you have received and understood. AFFIRM means yes, and NEGATIVE means no, permission not granted, or that is not correct. ROGER means only that the whole of the last transmission was received; it never answers a question. WILCO means I understand and will comply. STANDBY means wait and I will call you, and is neither an approval nor a refusal. SAY AGAIN asks for a repeat of all or part of the last transmission. CORRECTION means a mistake was made and the right version follows. WORDS TWICE, as a request, means communication is difficult so please send each word twice, and as information means I will do so. And READ BACK asks you to repeat a message exactly as received. The phrase GO AHEAD is no longer used; a station simply replies with both call signs.
Radio checks
Readability and traffic information Readability scale: 1 unreadable, 2 now and then, 3 with difficulty, 4 readable, 5 perfectly readable Test transmissions last no more than 10 seconds Traffic information: clock bearing , distance, direction of flight, and type or speed and level Relative movement: closing, converging, parallel, opposite direction, overtaking, crossing left to right… Identification is not a radar service in itself; you are told when it is lost 1 2 3 4 5 6 7 8 9 10 11 12 Bearing by the clock · distance · direction · type and level 2 o’clock, 5 miles crossing left to right 10 o’clock opposite direction
Chapter 20 · Communications
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
When you check a radio, the readability scale runs from one to five: one unreadable, two readable now and then, three readable but hard work, four readable, and five perfectly readable. Test calls must be as short as possible and never longer than ten seconds. Controllers pass traffic information by the clock, with twelve o’clock straight ahead: the bearing, the distance, the direction the traffic is flying, and its type, or relative speed, and level if known, using terms like closing, converging, opposite direction, overtaking, or crossing left to right. If you are turning, they may use compass points instead. Remember that being identified on radar is not a radar service in itself, and the controller will tell you if identification is lost.
Emergencies
Frequencies and codes 121.5 VHF emergency UHF: 243 MHz 121.5 MHz International VHF emergency frequency; 243 MHz is the UHF one.
2182 kHz International distress frequency in the MF band, watched by ships.
ELT Transmits on 121.5 , 243 and 406 MHz .
7700 7600 7500 emergency radio failure unlawful interference SSR codes 7700 emergency · 7600 radio failure · 7500 unlawful interference.
IFR flights Keep two-way contact in all airspace; outside controlled airspace, listen to and talk with the FIS unit.
Radio failure Squawk 7600 and follow the failure procedures from chapter 7, Rules of the Air.
Chapter 20 · Communications
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Learn the emergency frequencies and codes. One two one decimal five megahertz is the international VHF emergency frequency, and two four three megahertz the UHF one. Two one eight two kilohertz is the international distress frequency in the medium frequency band, watched by ships. Emergency locator transmitters send on one two one decimal five, two four three, and four zero six megahertz. The special SSR codes are seven seven zero zero for an emergency, seven six zero zero for radio failure, and seven five zero zero for unlawful interference. IFR flights keep two-way communication with air traffic services in every class of airspace, and outside controlled airspace they keep a listening watch with the unit giving flight information. The detailed distress, urgency and radio failure procedures are in chapter seven, Rules of the Air.
Weather
Broadcasts and air reports ATIS Continuous, repeated broadcast for one aerodrome; at most Indian airports. D-ATIS by data link.
ionosphere Mumbai · Kolkata many aerodromes VOLMET HF broadcast of aerodrome reports for a group of aerodromes; in India from Mumbai and Kolkata .
5000 ft visibility ≥ 10 km CAVOK Visibility 10 km or more, no cloud below 5000 ft or the highest MSA, no CB, no significant weather.
call sign position · time level next · time following point position report Position report Call sign, position, time, level, next position and time, and the one after.
temperature wind turbulence icing humidity once in each FIR Routine air report Once per FIR at MET points: temperature, wind, turbulence, icing, humidity.
Special air report Moderate or severe turbulence, severe icing, hail, CB, low-level wind shear, and similar.
Chapter 20 · Communications
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pilots get weather from several broadcasts. ATIS is a continuous, repeated broadcast for one aerodrome, available at most Indian airports, and also by data link. VOLMET broadcasts weather reports for a group of aerodromes on HF; in India it comes from Mumbai and Kolkata. When visibility is ten kilometres or more, there is no cloud below five thousand feet or the highest minimum sector altitude, no cumulonimbus, and no significant weather, the report says CAVOK. A voice position report gives your call sign, position, time, level, next position and time over it, and the significant point after that. Once in each FIR, at designated points, a routine air report adds temperature, wind, turbulence, icing and humidity. And you make a special air report whenever you meet moderate or severe turbulence, severe icing, hail, cumulonimbus, low-level wind shear, or anything else likely to affect other aircraft.
Radio frequency bands
Where aviation radios live VLF 3–30 kHz LF 30–300 kHz NDB MF 300 kHz–3 MHz NDB · 2182 kHz HF 3–30 MHz long-range voice VHF 30–300 MHz voice, VOR, LOC UHF 300 MHz–3 GHz GP, DME, SSR, GPS SHF 3–30 GHz rad alt, wx radarHF: sky wave off the ionosphere Straight lines only above VHF, so height sets the reachVHF voice 118–137 MHz . VOR 108–117.95, localiser 108.1–111.95 MHz.
UHF Glide path ~329–335 MHz, DME 960–1215 MHz, SSR 1030/1090 MHz .
Line of sight VHF and higher travel only in straight lines , so range depends on height.
India HF, VHF and UHF voice; remote VHF stations extend range; CPDLC at Mumbai, Delhi, Kolkata, Chennai.
Chapter 20 · Communications
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Radio frequencies are grouped into bands, each ten times higher than the last. NDBs work in the low and medium frequency bands, and HF, from three to thirty megahertz, carries long-range voice by bouncing off the ionosphere as a sky wave. VHF carries everyday voice on one one eight to one three seven megahertz, with VOR from one zero eight to one one seven decimal nine five, and the ILS localiser from one zero eight decimal one to one one one decimal nine five. UHF carries the glide path at around three hundred and thirty megahertz, DME, SSR on ten thirty and ten ninety megahertz, and GPS. The super high frequency band holds the radio altimeter and weather radar. VHF and higher frequencies travel only in straight lines, so their range depends on height. In India, voice is provided on HF, VHF and UHF, remote VHF stations extend coverage, and controller-pilot data link is available in the Mumbai, Delhi, Kolkata and Chennai regions.
Summary
What to take into the exam MAYDAY PAN PAN DF · safety MET · regularity Priority Distress, urgency, DF, flight safety, MET, regularity.
Call signs Flight-number call signs have no short form. Abbreviate only after ATC does.
RWY 27 QNH 1013 SQUAWK 4521 FL 180 HDG 090 SPEED 250 TL 150 every number that matters Read back Route clearances, runway clearances, QNH, SSR, levels, headings, speeds, TL.
ROGER received WILCO will comply STANDBY = wait Words ROGER = received. WILCO = will comply. STANDBY = wait.
7700 7600 7500 emergency radio failure unlawful interference Codes 7700 · 7600 · 7500. 121.5 / 243 / 406 MHz. 2182 kHz.
Readability 1 to 5. Test calls ≤ 10 s.
Chapter 20 · Communications
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. Messages go in this order: distress, urgency, direction finding, flight safety, meteorological, and flight regularity. A call sign made of the operator and flight number has no abbreviated form, and you abbreviate only after the ground station has. Read back route clearances, runway clearances, altimeter settings, SSR codes, levels, headings, speeds and transition levels. ROGER means received, WILCO means will comply, and STANDBY means wait. The emergency codes are seven seven, seven six and seven five hundred, the emergency frequencies one two one decimal five, two four three and four zero six megahertz, with two one eight two kilohertz at sea. And readability runs from one to five, with test calls of no more than ten seconds.