Air Law · Chapter 1
Definitions and Abbreviations The exact words of ICAO and Indian air law: aircraft, places, levels, airspace, time, occurrences and services.
THR CTR FL 100 QNH NOTAM © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to Air Law. Chapter one builds the vocabulary that every later chapter depends on. Exam questions in this subject often turn on a single word, so we learn each term precisely, compare the ICAO meaning with the Indian rule where they differ, and finish with the abbreviations you will meet on every chart and in every NOTAM.
Chapter roadmap
What this chapter covers 01
Aircraft, states and people What counts as an aircraft, the Indian weight and use categories, the five states, and who is on board.
02
Aerodromes and levels Manoeuvring and movement areas, the parts of a runway, and the words for vertical position.
03
Airspace, time and services Weather and airspace terms, night and flight time, accidents and incidents, the air traffic services and key abbreviations.
Chapter 1 · Definitions and Abbreviations
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
The chapter has three parts. Part one: what counts as an aircraft, the Indian weight and use categories, the five states that have a say over an aircraft, and the people on board. Part two: the areas of an aerodrome, the parts of a runway, and the words for vertical position. Part three: airspace, weather, time, accidents and incidents, the air traffic services, and finally the key abbreviations.
Introduction
One word can change the answer Most definitions come from the Annexes to the Chicago Convention India adds its own through the Bharatiya Vayuyan Adhiniyam 2024 (which replaced the Aircraft Act 1934 from 1 January 2025), the Aircraft Rules 1937 , DGCA CARs and the AIP India Where they differ, a DGCA question about India wants the Indian meaning Options often differ by one word: manoeuvring or movement , height or altitude Study method
Learn the edges For each term, know where it starts, where it stops and what it leaves out. That is exactly what the exam options test.
How this course works
Two sources, one answer This course gives the ICAO wording first, then flags any Indian rule that changes it.
Chapter 1 · Definitions and Abbreviations
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Most of the definitions in air law come from the Annexes to the Chicago Convention, the treaty that set up ICAO. India adds its own through the Bharatiya Vayuyan Adhiniyam of 2024, which replaced the Aircraft Act of 1934 from the first of January 2025, the Aircraft Rules of 1937, which still apply until new rules are made, the DGCA Civil Aviation Requirements, and the AIP India. Where the two differ, a DGCA question about India wants the Indian meaning. And many exam options differ by just one word, such as manoeuvring or movement, height or altitude. So learn the edges of each term: where it starts, where it stops, and what it leaves out. In this course the ICAO wording comes first, and any Indian rule that changes it is flagged.
01
Aircraft, states and people Before the rules, the machines and the people they apply to.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: the machines, the states and the people that the rules apply to.
Aircraft
Held up by the air, not by the ground Aircraft : any machine that the air itself holds up in the atmosphere, but not by air pushed against the earth’s surfaceThat last phrase rules out the hovercraft Aeroplane : power-driven, heavier than air, lift mainly from surfaces that stay fixed in flightHelicopter : heavier than air, held up by power-driven rotors on roughly vertical axesNot an aircraft Hovercraft: rides on air pushed against the surface, not held up by the air LIGHTER THAN AIR · aerostats HEAVIER THAN AIR · aerodynes Free balloon Airship Glider Aeroplane Helicopter
Chapter 1 · Definitions and Abbreviations
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aircraft is any machine that the air itself holds up in the atmosphere, but not by air pushed against the earth’s surface. That last phrase is what rules out the hovercraft, which rides on air pushed against the ground. Aircraft divide into lighter than air, the aerostats such as free balloons and airships, and heavier than air, the aerodynes. Without an engine, a heavier-than-air machine is a glider or a kite. With power, it is an aeroplane, which is heavier than air and gets its lift mainly from surfaces that stay fixed in flight, or a helicopter, which is held up by power-driven rotors turning on roughly vertical axes.
Aircraft Rules 1937 and CARs
Indian categories by size and use Size
Large aeroplane Maximum certificated take-off mass over 5700 kg . At 5700 kg or less it is a small aeroplane.
1 seat ≤ 330 kg 2 seats ≤ 450 kg Size
Microlight Fixed wing, wing area at least 10 m². Single-seat up to 330 kg , two-seat up to 450 kg . Hang gliders and paragliders are excluded.
Use
Public transport Carrying people or goods for any kind of payment, or by an air transport undertaking even when no payment is made.
Use
Aerial work Flying for an industrial or commercial purpose, such as survey or crop spraying, that is not an air transport service.
Status
Military aircraft Naval, army and air force aircraft, plus any aircraft commanded by a serving member detailed for that purpose.
VT-ABC N123AB Indian ForeignStatus
Foreign aircraft Any aircraft on another country’s register rather than India’s. Indian aircraft carry VT- marks.
Chapter 1 · Definitions and Abbreviations
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Indian law sorts aircraft by size, by use and by status. A large aeroplane has a maximum certificated take-off mass over 5700 kilograms; at 5700 or less it is a small aeroplane. A microlight is fixed wing with a wing area of at least 10 square metres: single-seat up to 330 kilograms, two-seat up to 450 kilograms, and hang gliders and paragliders are excluded. Public transport means carrying people or goods for any kind of payment, or by an air transport undertaking even when no payment is made. Aerial work is flying for an industrial or commercial purpose, such as survey or crop spraying, that is not an air transport service. Military aircraft are naval, army and air force aircraft, plus any aircraft commanded by a serving member detailed for that purpose. And a foreign aircraft is one on another country’s register rather than India’s.
States
Five states can have a say over one aircraft State Which state it is Typical role State of Registry The state whose aircraft register lists it Nationality marks, certificate of airworthiness, licences of its crew State of the Operator Where the operator has its principal place of business, or else its permanent residence Air operator certificate and oversight of operations State of Design The state that oversees the organisation holding the type design Type certificate and airworthiness directives State of Manufacture The state that oversees the organisation doing final assembly Production approval State of Occurrence The state in whose territory an accident or incident happens Leads the investigation
Chapter 1 · Definitions and Abbreviations
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Five different states can have a say over one aircraft. The State of Registry is the state whose register lists the aircraft; it controls the nationality marks, the certificate of airworthiness and the licences of the crew. The State of the Operator is where the operator has its principal place of business, or if it has none, its permanent residence; it issues the air operator certificate. The State of Design oversees the organisation that holds the type design, and issues the type certificate. The State of Manufacture oversees the organisation that does the final assembly. And the State of Occurrence is the state in whose territory an accident or incident happens; it leads the investigation.
Pilot-in-command : the pilot named as commander and responsible for flying it safelyCrew member : anyone the operator assigns to duty on the aircraft during a flight duty periodFlight crew member : a licensed crew member with duties essential to operating the aircraftCabin crew member : performs safety duties for passengers, but is not flight crewCruise relief pilot : flies the cruise so the commander or co-pilot can take planned restAlso a licence
On the ground The flight operations officer , or flight dispatcher, is a ground role. DGCA licenses it, and it supports the commander in planning and watching the flight.
Watch the word
Exam trap Cabin crew are crew members, but not flight crew members. Only the flight crew need a pilot or engineer licence for their duty.
Chapter 1 · Definitions and Abbreviations
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The pilot-in-command is the pilot named as commander and responsible for flying the aircraft safely; in commercial flying the operator designates this pilot. A crew member is anyone the operator assigns to duty on the aircraft during a flight duty period. A flight crew member is a licensed crew member with duties essential to operating the aircraft. A cabin crew member performs safety duties for passengers, but is not flight crew: that is a common exam trap. A cruise relief pilot flies the cruise so the commander or co-pilot can take planned rest. On the ground, the flight operations officer, or flight dispatcher, holds a DGCA licence and supports the commander in planning and watching the flight.
02
Aerodromes and levels The places on an aerodrome and the words for how high you are.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: the places on an aerodrome, and the words for how high you are.
Aerodrome
Movement is bigger than manoeuvring Aerodrome : a marked-out area of land or water, with its buildings and equipment, where aircraft arrive, depart and move about on the surfaceManoeuvring area : runways and taxiways used for take-off, landing and taxiing, excluding aprons Apron : where aircraft load, unload, refuel, park or are servicedMovement area : the manoeuvring area plus the aprons Runway Taxiway Apron Terminal (outside both) Manoeuvring area Movement area = manoeuvring area + aprons
Chapter 1 · Definitions and Abbreviations
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aerodrome is a marked-out area of land or water, with its buildings and equipment, where aircraft arrive, depart and move about on the surface. Inside it, the manoeuvring area is the runways and taxiways used for take-off, landing and taxiing, excluding the aprons. The apron is where aircraft load and unload, refuel, park or are serviced. Put the two together and you have the movement area: the manoeuvring area plus the aprons. A quick memory aid: movement is the bigger word and the bigger area.
Runway
Where landing really begins Threshold : the beginning of the part of the runway usable for landingDisplaced threshold : one not at the physical start of the runwayTouchdown zone : the stretch beyond the threshold where landing aircraft should first touch downStopway : prepared area after the take-off run where an aircraft can stop in an abandoned take-offClearway : area beyond the runway end, controlled by the aerodrome authority, over which an aeroplane can make part of its initial climb Runway strip Threshold (displaced here) Touchdown zone Stopway Clearway Landing direction Arrows: usable for take-off and taxiing, not for landing
Chapter 1 · Definitions and Abbreviations
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The threshold is the beginning of the part of the runway usable for landing. It is not the holding point and not where aircraft line up, which are both classic wrong options. A displaced threshold is one that is not at the physical start of the runway; the pavement before it, marked with arrows, can be used for take-off and taxiing but not for landing. The touchdown zone is the stretch beyond the threshold where landing aircraft are meant to first touch down. A stopway is a prepared area after the take-off run where an aircraft can be stopped in an abandoned take-off. A clearway is an area beyond the runway end, on ground or water controlled by the aerodrome authority, over which an aeroplane can make part of its initial climb. All of this sits inside the runway strip, which reduces damage if an aircraft runs off the runway.
Vertical position
Three words, three starting points Altitude : vertical distance measured from mean sea levelHeight : vertical distance measured from a specified datum, such as the aerodromeElevation : the vertical distance of a point on, or fixed to, the earth’s surface above mean sea levelFlight level : a surface of constant pressure related to 1013.2 hPaAerodrome elevation : the elevation of whichever point of the landing area is highest Aerodrome Mean sea level Standard pressure surface, 1013.2 hPa Flight level Altitude Height Elevation
Chapter 1 · Definitions and Abbreviations
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three words describe vertical position, and each has its own starting point. Altitude is the vertical distance measured from mean sea level. Height is measured from a specified datum, such as the aerodrome. Elevation is the vertical distance of a point on, or fixed to, the earth’s surface, above mean sea level, so elevation belongs to the ground and altitude to the aircraft. A flight level is a surface of constant pressure related to the standard setting of 1013.2 hectopascals. Aerodrome elevation is the elevation of whichever point of the landing area is highest. Level is the general word that covers all of them.
Vertical position
Changing from altitudes to flight levels Transition altitude : at or below it, vertical position is given as altitude on QNHTransition level : the lowest flight level you can use above the transition altitudeTransition layer : the airspace between the twoClimbing, set 1013.2 hPa passing the transition altitude ; descending, set QNH passing the transition level Altitudes altimeter on QNH Transition altitude Transition layer Transition level lowest usable flight level Flight levels altimeter on 1013.2 hPa Climbing: set standard (1013.2) passing the transition altitude Descending: set QNH passing the transition level
Chapter 1 · Definitions and Abbreviations
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
At or below the transition altitude, an aircraft’s vertical position is given as an altitude, with the altimeter on QNH. The transition level is the lowest flight level you can use above the transition altitude. The airspace between the two is the transition layer. So when climbing, set the standard 1013.2 hectopascals as you pass the transition altitude, and when descending, set QNH as you pass the transition level. The Altimeter Setting chapter covers how these are chosen.
03
Airspace, time and services Weather limits, airspace, night, accidents and the services that keep traffic safe.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: weather limits, airspace, time, accidents and incidents, and the services that keep traffic safe.
Weather terms
Seeing outside, or flying on instruments distance from cloud visibility VMC · fly VFR by looking outside CTR cloud below VMC limits Special VFR · ATC clears it, inside a CTR instruments IMC · fly IFR on instrumentsVMC and IMC VMC : visibility, cloud distance and ceiling at or above the minima. IMC : below them.
VFR and IFR The rules a flight follows: visual or instrument . Not the weather itself.
Special VFR A VFR flight that ATC clears inside a control zone when the weather is below VMC.
Chapter 1 · Definitions and Abbreviations
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Start with the weather words. Visual meteorological conditions, VMC, means visibility, cloud distance and ceiling all at or above the set minima. In VMC a pilot can fly by the visual flight rules, VFR, looking outside, seeing the ground and keeping clear of cloud. IMC is anything below those minima: the aircraft is in or near cloud and must fly by the instrument flight rules, IFR, using its instruments. Remember that a flight is VFR or IFR by the rules it follows, not by the weather. Between the two sits special VFR: a VFR flight that ATC clears to fly inside a control zone when the weather is below VMC.
Weather terms
Visibility, ceiling and runway visual range Cloud covering more than half the sky RVR: how far the pilot sees along the runway Visibility: how far a known object is seen Ceiling base below 20 000 ftVisibility How far a known object can be seen. Flight visibility is from the cockpit; ground visibility is reported at the aerodrome.
Ceiling Base of the lowest layer covering more than half the sky , counted below 20 000 ft (6000 m) .
RVR How far the pilot on the centreline sees the runway markings or lights .
Chapter 1 · Definitions and Abbreviations
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now three ways of measuring how well you can see. Visibility is how far a known object, like a distant tower, can be seen and identified: unlit objects by day, lit ones by night. Flight visibility is measured forward from the cockpit, and ground visibility is reported at an aerodrome. The ceiling is the height of the base of the lowest cloud layer that covers more than half the sky, counting only cloud below 20,000 feet, or 6000 metres. And runway visual range, RVR, is how far a pilot on the runway centreline can make out the runway’s painted markings or its edge and centreline lights.
Airspace
Where control starts and stops Flight information region
FIR Flight information and alerting services throughout
Control area Controlled from a set limit above the earth upward
Control zone Controlled from the surface up to a set upper limit
Terminal control area
TMA A control area where ATS routes meet near major aerodromes
Airway A control area, or part of one, shaped as a corridor
Side view: cut through the aerodrome FIR: flight information and alerting everywhere inside Control AREA: base ABOVE the surface uncontrolled uncontrolled CTR Control ZONE: from the SURFACE TMA (a control area) routes meet near the big aerodrome Airway corridor Airway ATZ not to scale 3D view CTR ATZ Airway TMA
Chapter 1 · Definitions and Abbreviations
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
A flight information region, or FIR, is airspace of defined size in which flight information and alerting services are given. A control area is controlled airspace from a set limit above the earth upward. A control zone is controlled airspace from the surface up to a set upper limit, protecting the aerodrome. A terminal control area, TMA, is a control area where ATS routes meet near one or more major aerodromes. An airway is a control area, or part of one, shaped as a corridor. And an aerodrome traffic zone, ATZ, is airspace around an aerodrome set up to protect aerodrome traffic. Remember the pair: control zone starts at the surface, control area starts above it.
Special airspace
Four kinds of special airspace Prohibited area : flight is forbidden Restricted area : flight allowed only on specified conditions Danger area : activities dangerous to flight may exist at set timesADIZ : aircraft must meet extra identification and reporting rulesExam tip Rank by severity: prohibited (never), restricted (only on conditions), danger (allowed, take care).
SEA not to scale P · Prohibited over the capital: no flight at all route bends round P R · Restricted military airfield: enter only on conditions D · Danger firing range: hazard at notified times, flying is not forbidden ADIZ identify and report before you cross inProhibited never Restricted only on conditions Danger allowed, take care ADIZ identify first
Chapter 1 · Definitions and Abbreviations
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are four kinds of special airspace to learn. In a prohibited area, flight is forbidden over the land or territorial waters of a state. In a restricted area, flight is restricted by specified conditions. In a danger area, activities dangerous to flight may exist at specified times, but flight is not forbidden. And an air defence identification zone, ADIZ, is airspace in which aircraft must meet identification and reporting rules in addition to the normal ATS procedures. India has several air defence identification zones, so this matters for Indian flight planning.
Time
When the clock starts Night : from the end of evening civil twilight to the start of morning civil twilight (or a period set by the authority)Civil twilight ends when the sun’s centre is 6° below the horizon Flight time : first moving to take off until finally at restEAT : when ATC expects a delayed arrival to leave the holdEOBT : when the aircraft expects to start moving for departure Sunset NIGHT civil twilight civil twilight Night: end of evening civil twilight → start of morning civil twilight or another period between sunset and sunrise set by the authority sun centre 6° below Sunrise take-off chocks away chocks on FLIGHT TIME: first moves to take off → finally comes to rest (chock to chock) EAT expected to leave the hold approach starts EOBT expects to start moving Total estimated elapsed time (IFR): take-off → start of the approach
Chapter 1 · Definitions and Abbreviations
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Night runs from the end of evening civil twilight to the start of morning civil twilight, or another period between sunset and sunrise set by the appropriate authority. Civil twilight ends when the centre of the sun is 6 degrees below the horizon. Flight time, for an aeroplane, runs from the moment it first moves to take off until it finally comes to rest after the flight; think of it as chock to chock. Expected approach time is when ATC expects a delayed arrival to leave the hold and start its approach. Estimated off-block time is when the aircraft expects to start moving for departure. And on a flight plan, total estimated elapsed time for IFR runs from take-off to the point where the instrument approach will start; for VFR it runs to overhead the destination.
Occurrences
Accident, serious incident or incident An accident happens between anyone getting on board intending to fly and the last person getting off It needs one of: a person killed or seriously injured ; damage or structural failure ; the aircraft missing or unreachable Serious incident : an accident nearly happenedIncident : anything else that affects, or could affect, safety boards to fly last person off ACCIDENT WINDOW Injury or death Structural damage Missing or unreachable? Any one → ACCIDENT Nearly an accident → SERIOUS INCIDENT Safety affected → INCIDENT
Chapter 1 · Definitions and Abbreviations
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
An accident is an occurrence that happens between the moment anyone gets on board intending to fly and the moment the last person has got off. It needs one of three things: a person killed or seriously injured; damage or structural failure that harms the aircraft’s strength, performance or flight characteristics and needs major repair; or the aircraft missing or completely unreachable. If none of those happened but an accident nearly did, it is a serious incident. Anything else linked to the operation that affects, or could affect, safety is an incident. The accident chapter covers how each one is reported to DGCA and investigated.
Services
Four services, one purpose each Air traffic control : prevents collisions and keeps traffic orderly and expeditious, through aerodrome , approach and area controlFlight information : advice and information that help flights operate safely and efficientlyAlerting : tells the right organisations when an aircraft needs search and rescueAdvisory : separation as far as practical between IFR flights in advisory airspace Aerodrome control the tower Approach control radar: arrivals and departures Area control centre aircraft on airways Flight information advice: “weather ahead” Alerting service calls search and rescue
Chapter 1 · Definitions and Abbreviations
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air traffic services is the umbrella term, and it holds four services. The air traffic control service prevents collisions between aircraft, and between aircraft and obstructions on the manoeuvring area, and keeps traffic orderly and expeditious; it is given as area control, approach control and aerodrome control. The flight information service gives advice and information that help flights operate safely and efficiently. The alerting service tells the right organisations when an aircraft needs search and rescue, and helps them. The advisory service gives separation, as far as practical, between IFR flights in advisory airspace. If a question asks which service prevents collisions, the answer is the air traffic control service, not flight information and not alerting.
Abbreviations
The abbreviations you will meet everywhere AIP
Aeronautical Information Publication
lasting information
! NOTAM
Notice to airmen
urgent or temporary
AIC
Aeronautical Information Circular
advice that fits neither
ATIS
Automatic terminal information service
recorded airport broadcast
FIR
Flight information region
information and alerting
CTR / CTA
Control zone / control area
from surface / from above it
TMA
Terminal control area
where routes meet
ATZ
Aerodrome traffic zone
protects the circuit
RVR
Runway visual range
seeing along the runway
EAT
Expected approach time
leave the hold
MEL
Minimum equipment list
what may be inoperative
AOC
Air operator certificate
permission to operate
ELT
Emergency locator transmitter
beacon after a crash
MSA
Minimum sector altitude
safe height near a fix
DA / DH
Decision altitude / height
with vertical guidance
MDA / MDH
Minimum descent altitude / height
without vertical guidance
Chapter 1 · Definitions and Abbreviations
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the abbreviations you will meet everywhere. The AIP, the Aeronautical Information Publication, holds lasting information. A NOTAM, notice to airmen, carries urgent or temporary information. An AIC, Aeronautical Information Circular, carries advice that suits neither. ATIS is the automatic terminal information service. FIR is the flight information region; CTR and CTA are the control zone and control area; TMA is the terminal control area, and ATZ the aerodrome traffic zone. RVR is runway visual range and EAT expected approach time. The MEL is the minimum equipment list and the AOC the air operator certificate. ELT is the emergency locator transmitter, and MSA the minimum sector altitude. Finally, DA and DH are decision altitude and height, used on approaches with vertical guidance, while MDA and MDH are minimum descent altitude and height, used on approaches without it.
Summary
What to take into the exam Not an aircraft Hovercraft: rides on air pushed against the surface, not held up by the air LIGHTER THAN AIR · aerostats HEAVIER THAN AIR · aerodynes Free balloon Airship Glider Aeroplane HelicopterAircraft Held up by the air, not against the ground. Large aeroplane: over 5700 kg.
Runway Taxiway Apron Terminal (outside both) Manoeuvring area Movement area = manoeuvring area + apronsAerodrome Movement = manoeuvring area + aprons. Threshold = start of the landing part.
Aerodrome Mean sea level Standard pressure surface, 1013.2 hPa Flight level Altitude Height ElevationLevels Altitude from MSL, height from a datum, elevation of the ground. FL on 1013.2 hPa.
Altitudes altimeter on QNH Transition altitude Transition layer Transition level lowest usable flight level Flight levels altimeter on 1013.2 hPa Climbing: set standard (1013.2) passing the transition altitude Descending: set QNH passing the transition levelTransition Climb: standard at the transition altitude. Descend: QNH at the transition level.
boards to fly last person off ACCIDENT WINDOW Injury or death Structural damage Missing or unreachable? Any one → ACCIDENT Nearly an accident → SERIOUS INCIDENT Safety affected → INCIDENTOccurrences Accident: boarding to disembarking, with injury, damage or a missing aircraft.
Aerodrome control the tower Approach control radar: arrivals and departures Area control centre aircraft on airways Flight information advice: “weather ahead” Alerting service calls search and rescueServices ATC prevents collisions. FIS informs. Alerting calls SAR. Advisory: IFR, as far as practical.
Chapter 1 · Definitions and Abbreviations
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six things to take into the exam. An aircraft is held up by the air, not by air pushed against the ground, and a large aeroplane is over 5700 kilograms. The movement area is the manoeuvring area plus the aprons, and the threshold is the start of the part usable for landing. Altitude is from mean sea level, height from a datum, elevation belongs to the ground, and flight levels are on 1013.2. Climbing, set standard at the transition altitude; descending, set QNH at the transition level. An accident runs from boarding to disembarking and needs injury, damage or a missing aircraft. And among the services, ATC prevents collisions, flight information informs, alerting calls search and rescue, and advisory gives IFR separation as far as practical.