Air Law · Chapter 10
Holding Procedures
The parking space of the sky: the shape of a hold, the three ways to join it, the speeds to fly, and how ATC stacks aircraft above one another.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter roadmap
What this chapter covers
01
The pattern
Shape, names, turns, timing and speeds.
02
Joining
The three entry sectors and the parallel, offset and direct entries.
03
ATC and protection
Clearances, the stack, shuttling, and obstacle clearance.
Chapter 10 · Holding Procedures
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
- Standard holds turn right; a left-hand hold is its mirror image and is shown on the chart
- All turns at rate 1 (3° a second) or 25° bank, whichever needs less bank
- Outbound leg: 1 minute at or below 14 000 ft, 1½ minutes above, or to a set DME distance; timing starts over or abeam the fix, whichever is later
- Correct heading and timing for the known wind; tell ATC if you cannot fly the normal procedure
Chapter 10 · Holding Procedures
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Speeds
How fast you may hold
- Up to 14 000 ft: 230 kt (170 kt for holds limited to categories A and B)
- Above 14 000 ft to 20 000 ft: 240 kt
- Above 20 000 ft to 34 000 ft: 265 kt
- Above 34 000 ft: Mach 0.83
- In turbulence: up to 280 kt or Mach 0.8, whichever is less, only with ATC clearance unless published
Chapter 10 · Holding Procedures
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
02
Joining
Three sectors, three entries.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Joining the hold
Your heading decides the entry
Sector 1: parallel
Over the fix, turn to fly outbound parallel on the non-holding side for the leg time, turn left back to the fix, then turn right into the hold.
Sector 2: offset
Over the fix, fly 30° off the reciprocal, into the holding side, for the leg time (at most 1½ min), turn right onto the inbound track.
Sector 3: direct
Over the fix, simply turn right and fly the hold.
Chapter 10 · Holding Procedures
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
03
ATC and protection
Stacking, shuttling and the protected area.
e-books by eatpl.in · © 2026 · Do not copy or distribute
ATC
Stacking, shuttling and leaving
- ATC clears you to the hold with its fix, level and an expected approach time
- Be level at the holding level by 5 NM before the fix; report when established
- Aircraft are stacked 1000 ft apart; as the lowest leaves, the others shuttle (climb or descend in the hold) down
- Leave from over the fix, or when radar vectored; for a timed approach, adjust the legs to leave the fix on time
- Holding area keeps 300 m of clearance (600 m in mountains), with a 5 NM buffer where it tapers to zero
Chapter 10 · Holding Procedures
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Summary
What to take into the exam
Shape
Right-hand turns as standard; rate 1 or 25° bank, whichever is less.
Timing
Outbound 1 min at or below 14 000 ft, 1½ min above; start over or abeam the fix, whichever is later.
Speeds
230 kt (170 cat A/B) to 14 000; 240 to 20 000; 265 to 34 000; M0.83 above. Turbulence 280 kt / M0.8.
Sectors
1 = 110° parallel; 2 = 70° offset 30°; 3 = 180° direct. ±5° flexibility.
Stack
1000 ft apart; shuttle = level change in the hold; level 5 NM before the fix.
Protection
MOC 300 m (600 m mountains); 5 NM buffer.
Chapter 10 · Holding Procedures
9
e-books by eatpl.in · © 2026 · Do not copy or distribute