Air Law · Chapter 12
Parallel Runways, SSR and ACAS Busy airports, radar codes and the last line of defence: how parallel runways are used, how the transponder speaks for you, and what to do when ACAS shouts.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter twelve covers three topics that keep busy airspace safe. First, how parallel runways can be used at the same time. Second, the secondary surveillance radar transponder: its codes, Mode C and how to operate it. Third, the airborne collision avoidance system, ACAS, and exactly how to respond to its alerts.
Chapter roadmap
What this chapter covers 01
Parallel runways The four modes, spacing, NOZ and NTZ, joining the localiser.
02
SSR Codes, Mode C accuracy, operating the transponder, failure.
03
ACAS Traffic and resolution advisories and how to respond.
Chapter 12 · Parallel Runways, SSR and ACAS
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts. First, parallel runways: the four ways they can be used, the spacing each needs, and the protected zones. Second, the transponder: codes, Mode C accuracy, how to operate it and what to do if it fails. Third, ACAS: traffic advisories, resolution advisories and how to respond to them.
Parallel runways
Four ways to use two runways together Mode What happens Minimum centre-line spacing 1 · Independent approaches both runways take arrivals, no radar link between the streams 1035 m 2 · Dependent approaches both take arrivals, with radar separation kept between adjacent localisers 915 m 3 · Independent departures both runways used for departures at the same time 760 m 4 · Segregated operations one runway for arrivals, the other for departures 760 m Semi-mixed / mixed combinations: one runway for both, or both for both as for the modes used
1035 m 1 · independent arrivals 915 m 2 · dependent arrivals 760 m 3 · independent departures 760 m 4 · segregated the more independent the arrivals, the wider the gap
Chapter 12 · Parallel Runways, SSR and ACAS
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Parallel runways can be used at the same time in four basic modes. Mode one, independent parallel approaches: both runways take arrivals and there is no radar separation linking the two streams; the runway centre lines must be at least one thousand and thirty-five metres apart. Mode two, dependent parallel approaches: both take arrivals, but radar separation is kept between aircraft on adjacent localisers; at least nine hundred and fifteen metres. Mode three, independent parallel departures: both runways used for departures at once; at least seven hundred and sixty metres. Mode four, segregated operations: one runway for arrivals and the other for departures; also seven hundred and sixty metres. And semi-mixed or mixed operations combine these.
Independent approaches
Normal operating zones and the no transgression zone NOZ NOZ no transgression zone ≥ 610 m ≥ 1035 m apartNTZ A strip at least 610 m wide, midway between the extended centre lines, shown on the radar display. Nobody should enter it.
NOZ The airspace either side of each localiser where normal deviations stay. Controllers monitor both streams.
If one strays If an aircraft heads into the NTZ, the controller turns the threatened aircraft on the other approach away.
Chapter 12 · Parallel Runways, SSR and ACAS
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
On independent parallel approaches, each aircraft flies within a normal operating zone around its own localiser. Between the two lies the no transgression zone, at least six hundred and ten metres wide, shown on the radar display. Controllers monitor both approaches, and if an aircraft wanders towards the no transgression zone, they turn the aircraft on the other approach out of harm’s way. That is why independent approaches need the widest runway spacing of all.
Procedures
Rules for parallel approaches Independent: join the localiser at 30° or less , level for at least 2 NM before the glide path Until established: 1000 ft (300 m) vertical or 3 NM radar separation Missed approach tracks of adjacent approaches diverge by at least 30° Dependent: at least 2 NM diagonally between aircraft on adjacent localisers, and 3 NM in trail on the same one Independent departures: tracks diverge by at least 15° straight after take-off ≤ 30° ≥ 2 NM level glide path begins Until established: 1000 ft (300 m) vertical or 3 NM radar
Chapter 12 · Parallel Runways, SSR and ACAS
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
A few rules make parallel approaches safe. On independent approaches, radar vectors bring the aircraft onto the localiser at an angle of thirty degrees or less, so that it is established and level for at least two nautical miles before it meets the glide path. Until aircraft are established, they are kept at least one thousand feet, three hundred metres, apart vertically, or three nautical miles apart on radar. The missed approach tracks of the two approaches must diverge by at least thirty degrees. On dependent approaches, there must be at least two nautical miles diagonally between aircraft on adjacent localisers, and the normal three in trail on the same one. And for independent departures, the departure tracks must diverge by at least fifteen degrees immediately after take-off.
02
SSR Four digits that identify you on the radar.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: the SSR transponder, four digits that identify you on the radar.
SSR
Operating the transponder If a serviceable transponder is carried, operate it at all times in flight, radar service or not Codes are four digits from 0 to 7 : 4096 codes. Set the code ATC gives; with no instruction, 2000 Always select Mode C (altitude, referenced to 1013) when fitted, unless ATC says otherwise Read back the mode and code : “squawking Alpha 2161”; press IDENT only when asked To change code, go to STBY first, or set the unused controller and switch over ATC TRANSPONDER REPLY 7 7 0 0 each digit 0 to 7: 4096 codes no instruction: 2000OFF SBY ON ALT ALT: Mode C, pressure altitude read back: “squawking Alpha 2161”IDENT Press IDENT only when ATC asks changing code: switch to standby first
Chapter 12 · Parallel Runways, SSR and ACAS
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
The transponder answers radar interrogations with a four-digit code. If you carry a serviceable one, operate it at all times in flight, whether or not you are receiving a radar service. Each digit runs from zero to seven, giving four thousand and ninety-six codes. Set the code ATC gives you; with no instruction and no regional agreement, use two thousand. Always select Mode C, which reports your pressure altitude referenced to one zero one three, unless ATC tells you otherwise. When ATC asks you to squawk a code, read back the mode and the code, for example squawking alpha two one six one. Press IDENT only when ATC asks you to. And to change the code without accidentally passing through an emergency code, switch to standby first, or set the new code on the controller not in use and switch across.
Codes
Codes with a meaning of their own 7 7 0 0 EMERGENCY or keep the code ATC gave 7700 Emergency , unless ATC has already given you a code; you may still choose 7700 if you think it best.
7600 Radio failure . ATC may test whether your receiver works by asking you to IDENT or change code.
7500 Unlawful interference . ATC will keep it confidential until you mention it; use 7700 instead if needed.
2 0 0 0 no ATC code given no regional agreement 2000 No ATC instruction and no regional agreement.
7 0 0 0 conspicuity radar, no service 7000 Conspicuity : where radar is in use but you are not receiving a service.
0 0 0 0 unserviceable, as ATC directs 0000 Transponder unserviceable or inaccurate, as ATC directs.
Chapter 12 · Parallel Runways, SSR and ACAS
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Some codes have a meaning of their own. Seventy-seven hundred means emergency; if ATC has already given you a code, keep it unless told otherwise, though you may switch to seventy-seven hundred if you think it best. Seventy-six hundred means radio failure; the controller may check whether your receiver still works by asking you to IDENT or change code. Seventy-five hundred means unlawful interference; ATC treats it with discretion until you mention it on the radio, and you may use seventy-seven hundred instead if the situation is severe. Two thousand is for when there is no ATC instruction and no regional agreement. Seven thousand is the conspicuity code, used where radar is in use but you are not receiving a service. And zero zero zero zero indicates a faulty transponder, used as ATC directs.
Mode C
Checking the altitude readout ATC asks you to report your level; if Mode C agrees within ±300 ft , it is accepted Within 300 ft of a level: occupying , maintaining , passing or reaching it More than 300 ft from the old level: it has been vacated Many states use a tighter ±200 ft If the transponder fails before departure: tell ATS, write N in item 10 of the plan, seek an exemption, or go for repair FL 120 +300 ft −300 ft readout and report agree within 300 ft: accepted Within ±300 ft: occupying, maintaining, passing, reaching more than 300 ft away: vacated many states use a tighter ±200 ft
Chapter 12 · Parallel Runways, SSR and ACAS
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Controllers check the Mode C readout against your report. If the two agree within three hundred feet, Mode C is accepted. An aircraft is taken to be occupying, maintaining, passing or reaching a level when Mode C shows it within three hundred feet of that level, and to have vacated a level when it is more than three hundred feet away. Many states use a tighter two hundred feet. If the transponder fails before departure and cannot be fixed, tell ATS, preferably before filing the flight plan, put the letter N in item ten, follow the procedures for an exemption, and if required fly to the nearest aerodrome where it can be repaired.
03
ACAS The last line of defence.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: ACAS, the last line of defence.
ACAS
Traffic and resolution advisories ACAS uses other aircraft’s transponders to spot collision risks, independent of the ground TA (traffic advisory): look out; an RA may follow. Do not manoeuvre on a TA aloneRA (resolution advisory): respond at once , even against an ATC instructionStall, wind shear and GPWS warnings take priority over ACAS Tell ATC as soon as workload allows; return to your clearance when clear, and tell ATC again TA: traffic, look out RA: act now “Climb, climb” “Descend, descend”
Chapter 12 · Parallel Runways, SSR and ACAS
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
ACAS, the airborne collision avoidance system, listens to other aircraft’s transponders to spot collision risks, working independently of the ground. It gives two kinds of alert. A traffic advisory, a TA, warns you of nearby traffic and that a resolution advisory may follow; look out, but do not manoeuvre on a TA alone. A resolution advisory, an RA, tells you to climb, descend or adjust your vertical speed. Respond to it immediately, unless that would endanger the aircraft, even if it means disobeying an ATC instruction, because the other aircraft is getting a matching advisory. Stall, wind shear and ground proximity warnings take priority over ACAS. Remember that the traffic you can see may not be the one causing the RA, especially at night. Tell ATC about the RA as soon as workload allows, return promptly to your clearance once the conflict is over, and tell ATC again. Using ACAS never removes the pilot’s own responsibility for the aircraft.
Summary
What to take into the exam NTZ ≥ 610 m 1035 915 760 modes 1 · 2 · 3/4 (m) Spacing Mode 1: 1035 m · Mode 2: 915 m · Modes 3 and 4: 760 m. NTZ at least 610 m.
≤ 30° level 2 NM before the glide path 1000 ft or 3 NM until established Joining ≤ 30° intercept, level 2 NM before the GP; 1000 ft or 3 NM until established; missed approaches diverge ≥ 30°.
2 0 0 0 ALT (Mode C) on IDENT only when asked Transponder Always on with Mode C. Digits 0–7. No instruction: 2000. IDENT only when asked.
7 7 0 0 emergency 7 6 0 0 radio failure 7 5 0 0 interference 7700 · 7600 · 7500 Codes 7700 emergency · 7600 radio failure · 7500 unlawful interference · 7000 conspicuity.
FL120 ±300 ft accepted more than 300 ft away: vacated Mode C ±300 ft accepted. Vacated once more than 300 ft away.
RA: climb! RA: descend! TA: look only ACAS TA: look, do not manoeuvre. RA: follow at once. GPWS, stall and wind shear take priority.
Chapter 12 · Parallel Runways, SSR and ACAS
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six things to take into the exam. Runway spacing: one thousand and thirty-five metres for mode one, nine hundred and fifteen for mode two, seven hundred and sixty for modes three and four, with a no transgression zone of at least six hundred and ten metres. Joining: intercept at thirty degrees or less and be level two miles before the glide path; one thousand feet or three miles apart until established; missed approach tracks diverge by thirty degrees. The transponder is always on with Mode C; digits run zero to seven; with no instruction use two thousand; IDENT only when asked. Codes: seventy-seven, seventy-six and seventy-five hundred, and seven thousand for conspicuity. Mode C is accepted within three hundred feet, and a level is vacated once more than three hundred feet away. And ACAS: a TA means look, not manoeuvre; an RA means act at once; and ground proximity, stall and wind shear warnings come first.