Aircraft Systems · Chapter 16
Emergency Lighting, Exits and Slides How a crowded cabin is emptied in the dark: public address and megaphones, emergency lighting, torches, doors, overwing hatches, escape slides and descent devices, and cut-in areas for rescuers.
EXIT
smoke above head height
floor path lighting
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter sixteen is about getting everybody out. An evacuation may have to be done in darkness, in smoke, with the aircraft tilted on a collapsed leg, or in water. So the rules give the crew a way to talk to the passengers, lights that work when the aircraft power has gone, torches, exits that anyone can find and open, slides that inflate by themselves, and marked places where rescuers can cut their way in. We will go through each item, with the numbers you need for the exam.
Chapter 16
Getting everyone out 1 Talk PA and megaphones 2 See emergency lighting, torches 3 Find exits and marking 4 Open doors and hatches 5 Descend slides and devices 6 Rescue cut-in areas Talk and see PA, megaphones, emergency lighting, floor path marking, torches.
Exits Door rules, marking, overwing hatches, the 1.83 m sill rule.
Slides Arming, deployment, inflation, slide types, crew escape devices.
Standards The 90-second evacuation, cut-in areas, refuelling with passengers.
Chapter 16 · Emergency Lighting, Exits and Slides
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
This chapter follows the order in which things happen in an evacuation. First the crew must be able to talk to the passengers, so we start with the public address system and megaphones. Then everyone must be able to see, so we look at emergency lighting, floor path marking and torches. Next come the exits themselves: the rules for doors, how exits are marked, how overwing hatches work, and when a descent aid is needed. Then the escape slides: how they are armed, how they deploy and inflate, and the other descent devices. We finish with the standards behind it all: the ninety second evacuation, the cut-in areas that let rescuers in, and which exits must be ready when fuel is loaded with passengers on board.
Part 1 · Principles
Who sets the rules, and the golden rule Carriage, fitting, marking and use of safety equipment are set by the airworthiness and operations requirements (JAR / EASA; in India the DGCA CARs) Equipment is laid out in the order it is used in a crash or ditching Every item must be readily accessible , its location obvious , and protected from accidental damage Type-specific detail is in the aircraft's Flight / Operations Manual Crew equipment is checked before flight Order of use in a crash or ditching 1 Before impact PA briefing, brace position 2 Power lost emergency lights come on 3 Stop torches, megaphones, find exits 4 Open exits doors, hatches, slides 5 Leave slides, ropes, straps; jackets 6 Survive rafts, beacons, first aid Every item: • readily accessible • obvious location • reached directly • safe from damage • checked pre-flight
Chapter 16 · Emergency Lighting, Exits and Slides
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The carriage, fitting, marking and use of safety equipment are not left to the airline. They are laid down in the joint airworthiness and operations requirements, which in Europe grew from the J A Rs into today's E A S A rules, and in India are mirrored in the D G C A civil aviation requirements. In the exam, the answer to "where are these rules found" is the joint airworthiness requirements. Think of the equipment in the order you would use it in a crash or a ditching, from the briefing before impact to survival afterwards. One golden rule covers every item: it must be readily accessible, its location must be obvious, you must be able to reach it directly, and it must be protected from accidental damage. The details for a particular type are in its flight and operations manuals, and the crew check their own equipment before every flight.
Part 1 · Talking to passengers
Public address and megaphones PA : a microphone for the cabin crew at each floor-level exit ; flight crew use a hand mic or headsetMegaphones : battery powered, for when the PA has lost powerRequired with more than 60 seats and one or more passengers Per deck: 61–99 seats: 1 ; 100 or more: 2 Check before flight: press to transmit, hear a click or see the green light Battery powered, at strategic points Check: press transmit, hear a click or see the green light Per passenger deck seats megaphones 60 or fewer 0 61 – 99 1 100 or more 2 more than one deck, total over 60: at least one
Chapter 16 · Emergency Lighting, Exits and Slides
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
In an emergency the crew must be heard. The public address system has a microphone for the cabin crew at each floor-level exit, and the pilots can use either a hand microphone or their normal headsets. But the P A needs aircraft power, and after a crash that may be gone. So larger aircraft also carry battery-powered megaphones at strategic points, such as the front and rear of the cabin and on each deck. They are needed once the aircraft has more than sixty passenger seats and is carrying passengers. The scale is per passenger deck: sixty one to ninety nine seats need one megaphone, and a hundred or more need two. An aircraft with more than one deck and more than sixty seats in total needs at least one. Before flight the crew test each one by pressing the transmit switch and listening for a click, or looking for a small green light.
Part 2 · Emergency lighting
An independent lighting system More than 9 passenger seats : an emergency lighting system with its own power supply Inside: general cabin light , exit-area lights , lit exit signs , aisle lights in the bin bullnoses Low down: floor proximity escape path lights Outside: lights on the slides , the overwing route and where evacuees first touch the wing or ground So emergency lighting = flight deck, cabin interior and exterior lighting EXIT ceiling: general and exit-area lights exit sign floor path lights (green / white) exterior light on the escape area aisle lights in bin bullnoses
Chapter 16 · Emergency Lighting, Exits and Slides
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Any aircraft with more than nine passenger seats must have an emergency lighting system with a power supply independent of the normal cabin lighting. Look at the cross-section. In the ceiling there are lights for general illumination and lights over the exit areas. Lights in the bullnose of the overhead bins shine on the aisle. Self-illuminated exit signs mark the front, middle and back of the cabin, and every exit. Down at floor level, the escape path lights lead along the aisle. And outside, lights shine down each escape slide and along the overwing route, lighting the place where an evacuee first steps on the wing or touches the ground. So when an exam question asks what emergency lighting comprises, the answer is flight deck lighting, cabin interior lighting and exterior lighting, not just the inside of the cabin.
Part 2 · Emergency lighting
What must be lit, by seating capacity Passenger seats Emergency lighting required 9 or fewer, flying at night General cabin illumination for evacuation that works with the aircraft battery switched off (e.g. dome lights)10 to 19, not certificated to CS/JAR-23 or 25 Independent supply: general cabin illumination 10 to 19, certificated to CS/JAR-23 or 25 General illumination along the aisle, lighting in the exit areas , lit exit signs (red on white, or self-illuminated) 20 or more All of the above, plus lighting in floor-level exit areas and floor proximity escape path marking 20 or more, flying at night Exterior lighting at all passenger exits (older types: at overwing exits and exits needing descent aids)
Battery-powered emergency lights must last at least 10 minutes ; the system must warn the flight crew if it is not armed .
Chapter 16 · Emergency Lighting, Exits and Slides
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The amount of emergency lighting grows with the number of seats. With nine seats or fewer, flying at night, the aircraft only needs some general cabin light for evacuation that keeps working after the aircraft battery has been switched off; dome lights are the usual answer. From ten seats up there must be a proper emergency lighting system with its own supply. If the aircraft is certificated to the modern large or small aeroplane codes, that means general light along the aisle, light in the exit areas and illuminated exit signs, traditionally red letters on a white background. With twenty seats or more, add lighting in the floor-level exit areas and floor proximity escape path marking, and at night, exterior lighting at the exits. Two numbers to remember for every system: the lights must last at least ten minutes on their own batteries, and the flight crew must be warned if the system is not armed.
Part 2 · Emergency lighting
Floor proximity escape path marking Needed when the other lights are more than 4 ft (1.2 m) above the aisle floor Smoke rises: the ceiling lights are the first to disappear Markers about 40 in (1 m) apart along the aisle, green or white , turning red at the exits Lit arrows point to the overwing exits ; an EXIT sign sits low beside each exit Lets passengers leave their seats and find the exit by sight in dense smoke smoke: lights above 1.2 m (4 ft) hidden 4 ft (1.2 m) above the floor EXIT about 40 in (1 m) green / white markers along the aisle; red at the exit
Chapter 16 · Emergency Lighting, Exits and Slides
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
In a cabin fire the smoke rises and collects under the ceiling, so the ceiling lights are the first to vanish. That is why aircraft with twenty or more seats need floor proximity escape path marking whenever the other emergency lights are more than four feet, about one point two metres, above the aisle floor. Watch the smoke layer come down over the seats. Now the path markers light up along the aisle, about forty inches, roughly a metre, apart. They are usually green or white, and they turn red near the exit, where a low exit sign shows the way out. Lighted arrows also point to the overwing exits. A passenger crawling or stooping below the smoke can still see the line of lights and follow it to the door. Some modern cabins use photoluminescent strips that glow without any power at all.
Part 2 · Emergency lighting
Switching: flight deck and cabin Flight deck switch: OFF – ARMED – ON , guarded at ARMED Cabin crew switch: NORMAL – ON ARMED : lights come on by themselves if normal DC power fails or AC is switched offCabin ON overrides the flight deck switch; the flight deck sees NOT ARMED Hatch removal can light the overwing exit lights (switch ARMED) Flight deck Cabin (purser) panel ON ARMED OFF guard NOT ARMED caption ON NORMAL Flight deck ARMED, cabin NORMAL lights off; on by themselves if normal DC fails Flight deck ON lights on from their own batteries Cabin ON (overrides) lights on; flight deck shows NOT ARMED
Chapter 16 · Emergency Lighting, Exits and Slides
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The emergency lights are normally controlled from the flight deck by a three-position switch marked off, armed and on. It has a guard that holds it at armed, so it cannot be moved by accident. The cabin crew have their own switch with two positions, normal and on, which normally sits at normal. With the flight deck switch armed and the cabin switch normal, the emergency lights stay off, but if the normal D C power fails, or the A C power is switched off, they come on automatically. The cabin crew can also turn them on at any time by selecting on, and that overrides the flight deck switch whatever its position. The flight deck switch then shows a not-armed caption, which tells the pilots that the lights were switched on from the cabin. So emergency lighting can be switched on from the cockpit and from the cabin, independently.
Part 2 · Emergency lighting
Batteries and duration Lights run from their own nickel-cadmium (NiCad) batteries , with charging, monitoring and voltage regulation The batteries are kept charged from the aircraft DC system, normally the hot battery (vital) bus Minimum duration: 10 minutes Typical installations: about 20 to 30 minutes Exam: "minimum time emergency lighting must stay lit" → 10 min How long the emergency lights last 0 5 10 15 20 25 30 minutes after power loss minimum 10 min typical: about 20 to 30 min Own NiCad batteries in or near each unit charging, monitoring, voltage regulation Kept charged from the hot battery (vital) DC bus: live whenever a battery is fitted
Chapter 16 · Emergency Lighting, Exits and Slides
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
When the emergency lights are on, they are running from their own batteries, usually nickel-cadmium units with a circuit that charges them, monitors them and regulates their voltage. In normal flight those batteries are kept topped up from the aircraft D C system. Where the exam asks which bus bar the emergency lights draw their power from, the answer is the bus that is connected straight to the aircraft battery, called the hot battery bus or the vital bus, because it stays live even when everything else has been switched off. You do not need any more electrical theory than that here. Now the duration. The rule is that the emergency lighting must keep working for at least ten minutes. Real systems usually last longer, around twenty to thirty minutes, but if a question asks for the minimum, the answer is ten minutes.
Part 2 · Emergency lighting
Exterior lighting and the ways out Slide lights beside the forward and aft doors light the slide and its footLights near the overwing exits light the wing route and the ground contact area Required at night for aircraft with 20 or more seats Typical narrow-body: 4 floor-level doors and overwing exits each side Each exit is a pair: one on each side of the cabin slide lights beside the doors overwing exits with their own lights aft door escape route off the wing, ground contact area lit slide foot lit
Chapter 16 · Emergency Lighting, Exits and Slides
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now outside the aircraft. On a typical narrow-body airliner there are four floor-level doors, two at the front and two at the back, each with its own escape slide. Watch them light up on the model. Beside each of these doors a light is built into the fuselage, shining down the slide so that people can see where they will land. Next, the overwing exits, shown in green over the wing. Lights on the fuselage there illuminate the escape route along the wing and the area where people step off it onto the ground. At night, an aircraft with twenty or more seats must have this exterior lighting at its passenger exits. Notice that the exits come in pairs, one on each side. That matters for certification, because the evacuation test assumes one exit of each pair is blocked, as we will see later.
Part 2 · Seeing
Emergency torches Required on public transport aircraft: one for each crew member station , flight deck included Also beside each floor-level exit used for boarding or evacuation Held in a quick-release (Velcro) strap ; not recharged from the aircraft system A flashing red light or LED, about every 4 seconds , shows the battery is serviceable No flash on the pre-flight check: replace the torch flashing red indicator flashes about every 4 s = battery serviceable quick-release strap One at each crew member station, flight deck included One beside each floor-level exit used for boarding or escape Battery torch, not charged from the aircraft system Pre-flight check: indicator flashing, torch in its bracket
Chapter 16 · Emergency Lighting, Exits and Slides
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Torches are a legal requirement on public transport aircraft. There must be one readily accessible at each crew member station, including the flight deck, and the cabin crew have one beside each floor-level exit intended for boarding or evacuation. Each torch is held in a bracket by a quick-release Velcro strap, so it can be grabbed in the dark. In the installation described here the torches are not recharged from the aircraft electrical system; they rely on their own batteries. How do you know the battery is good? A small red neon light or L E D on the body of the torch flashes, typically every four seconds or so. That flashing is normal, and it means the torch is serviceable. During the pre-flight check the crew look for it. If the indicator is not flashing, the battery needs attention and the torch should be changed.
Part 3 · Exits
Requirements for doors and emergency exits A door used as an emergency exit must meet all of these:
Both sides Operable from inside and outside ; simple, obvious and usable in darkness .
Locked in flight A means to lock and safeguard each door against opening in flight; warning lights if not closed and locked.
Interlocks Door locks may be interlocked with the pressurisation system; power doors need a manual override .
Kept clear All doors and exits clear of obstruction in flight; signs seen from the main aisle .
Flight deck If the flight deck door locks, crew and passengers must reach their exits without using it .
Descent aid Sill more than 1.83 m (6 ft) above the ground: an approved self-supporting slide or equivalent.
Chapter 16 · Emergency Lighting, Exits and Slides
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Doors are first of all the way in, but most of them double as emergency exits, and then a long list of rules applies. A door must open from the inside and the outside, and its handle must be simple, obvious and easy to find in the dark. There must be a means to lock it and safeguard it against opening in flight, and warning lights must tell the crew if any door is not fully closed and locked. Door locks may be interlocked with the pressurisation system. If a door is power operated, there must be a manual override, because the power may be gone after a crash. Doors and exits must be kept clear of any obstruction in flight. If the flight deck door is lockable, neither crew nor passengers may need to pass through it to reach their exits. And any exit whose sill is more than one point eight three metres above the ground needs an approved descent aid.
Part 3 · Exits
Marking the exits Outside: every emergency exit outlined by a band 5 cm (2 in) wide in a contrasting colour Method of access and opening instructions marked on the exit Inside: each exit indicated by a sign visible from the main aisle Exit recognisable from a distance equal to the width of the cabin A means to find exits in dense fog, smoke or darkness : the emergency lighting EMERGENCY EXIT pull handle, push out band 5 cm (2 in) wide contrasting colour handle: simple, obvious, works in the dark Outside: every exit outlined; opening instructions shown Inside: exit signs seen from the aisle, readable at a distance equal to the cabin width
Chapter 16 · Emergency Lighting, Exits and Slides
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Rescuers outside need to find the exits as quickly as passengers inside. So every opening designated as an emergency exit must be outlined on the outside of the fuselage by a band five centimetres wide, about two inches, in a colour that contrasts with the paint around it. The exit must also carry clear details of how to get in and how to operate it. Inside the cabin, each passenger emergency exit must be shown by a sign that people walking along the main aisle can see, and the exit itself must be recognisable from a distance equal to the width of the cabin. Finally there must be a way of finding the exits in dense fog, smoke or darkness, which is the emergency lighting we have just studied. A common wrong answer says exits are painted yellow, or must all have slides. The rule is the two-inch contrasting band.
Part 3 · Exits
Overwing hatches: plug type Plug-type hatch: bigger than the opening, fitted from inside Held by mechanical locks and by cabin pressure pushing it onto the frame stops Opened from inside or outside with a spring-loaded handle at the top Pulled inwards , then lifted out of the frame A seat-back in the way folds forward when pushed at the top Plug-type overwing hatch (section) cabin pressure pushes the hatch onto the frame stops OUTSIDE CABIN frame stops spring-loaded handle at top pull handle, lift hatch IN, then out of the frame
Chapter 16 · Emergency Lighting, Exits and Slides
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
The overwing exits on most narrow-body airliners are removable hatches, and they are plug type. Look at the model. The opening in the fuselage frame is smaller than the hatch, and the hatch sits on the inside, resting against stops on the frame. In flight the cabin pressure pushes outwards on the whole hatch, pressing it harder onto those stops, so the higher the pressure differential, the more firmly it is held. Mechanical locks hold it as well. That is why a plug hatch cannot be opened in flight while the cabin is pressurised. To open it, from inside or outside, you pull the spring-loaded handle at the top, which releases the locks, and the hatch comes inwards, into the cabin, before it can be turned and lifted out of the frame. If a seat back is in the way, pushing hard on the top of the seat back makes it fold forward.
Part 3 · Exits
Using the overwing exit Escape straps above each hatch frame: one end fixed, the rest stowed in a tubeIn a ditching: a hand-hold to walk out on the wing and step into a raft Never remove the hatch in flight to prepare for evacuationPlace the hatch where it will not block the exit: out on the wing, or on the seats On some types removing a hatch lights the overwing exit lights on that side (switch ARMED) strap stowed in a tube above the frame escape strap hooked to a fitting on the wing hatch removed A hand-hold for walking out on a wet wing in a ditching Hatch thrown out on to the wing or put on the seats
Chapter 16 · Emergency Lighting, Exits and Slides
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Once the hatch is out, the overwing exit needs a little help. Above each hatch frame there is an escape strap, sometimes called a lifeline. One end is fixed to the frame and the rest is stowed in a tube running up into the cabin ceiling. You pull it out and hook its free end to a fitting on the wing. In a ditching the wing may be wet, slippery and awash, and the strap gives passengers a hand-hold as they walk out to step into a life raft. Two rules about the hatch itself. Never remove it in flight to get ready for an evacuation; wait until the aircraft has stopped. And when you do remove it, put it where it will not block the way out. Often it is simply thrown out onto the wing. On some types, removing the hatch also switches on the overwing exit lights on that side, provided the flight deck switch is at armed.
Part 3 · Exits
The 1.83 m (6 ft) sill rule sill height gear down Rule 1: sill more than 1.83 m (6 ft) above the ground, gear extended → descent aid needed sill higher when the nose gear collapses nose leg collapsed Rule 2 (types certificated from April 2000): also check with one or more legs collapsed Overwing exits need no aid if the escape route ends less than 1.83 m above the ground (flaps in the higher of take-off or landing position) Above the limit each exit needs a descent aid (normally a self-supporting slide). The flight crew exit has the same rule.
Chapter 16 · Emergency Lighting, Exits and Slides
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
How high can an exit be before passengers need help to reach the ground? The answer is one point eight three metres, which is six feet. If the sill of a passenger emergency exit is more than one point eight three metres above the ground with the aircraft standing on its landing gear, that exit must have an approved means to help people down, normally a self-supporting slide. For aircraft types first certificated from April two thousand, the rule goes further: the sill height must also be checked with one or more legs of the landing gear collapsed or not extended. Look at the right-hand picture: with the nose leg collapsed, the aft door is lifted even higher. Overwing exits are a special case. They need no descent aid if the place where the escape route leaves the wing is less than one point eight three metres above the ground, with the flaps in whichever of the take-off or landing positions is higher.
Part 4 · Descent devices
Ropes, reels, slides and crew escape Rope or tape Simplest aid: from flight deck windows or small exits. Some apron slides need the first two people down to hold them taut .
Inertia reel Crew hang on a handle and are lowered at a controlled rate from the flight deck of wide-bodied types.
Escape slide Fully inflatable and self-supporting ; some double as slide-rafts for ditching.
Flight crew exit If its lowest point is more than 1.83 m above the ground, a device for all flight crew is required.
Slide arming Slides stored inside the door are set to ENGAGE / ARMED for emergency use and DETACH / DISARMED for normal use.
PA command "Doors to automatic / manual, cross-check": the flight crew tell the cabin crew when to arm and disarm.
Chapter 16 · Emergency Lighting, Exits and Slides
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Several kinds of descent device are used. The simplest is a rope or a tape, still used from flight deck windows. Some older aircraft had apron slides that were not self-supporting: the first two people down held the bottom of the slide taut for everyone else, having gone down a rope themselves. On wide-bodied aircraft the flight crew may have an inertia reel: you hang on to a handle, slide over the edge, and the reel lowers you at a controlled rate, provided of course you can hold on. Most passenger exits now have fully inflatable, self-supporting slides, and some double as slide-rafts. The flight crew's own exit follows the same height rule: more than one point eight three metres above the ground means a device for all of them. Slides stored inside the doors must be engaged, or armed, for emergency use and detached, or disarmed, for normal use, and the flight crew usually give that order over the P A.
Part 4 · Escape slides
The escape slide installation Inflatable rubberised nylon slide in a pack on the lower inside face of each door A girt (retainer) bar along the bottom of the slide Girt bar in the floor fittings → slide armed ; on the door → disarmed Fully automatic : an ENGAGE / DETACH lever does it; semi-automatic : crew fit the bar by handArmed state shown by an indicator; a red manual inflation handle on the slide Door from inside, slide armed packboard (slide pack) cabin floor girt bar in floor fittings door handle ARMED flag / light manual inflation handle
Chapter 16 · Emergency Lighting, Exits and Slides
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Each floor-level door carries an inflatable slide made of rubberised nylon, folded into a pack on the lower inside face of the door. Along the bottom edge of the slide is a stiff bar called the girt bar, or retainer bar. Everything depends on where that bar is. If the girt bar is clipped into the fittings on the cabin floor, the slide is armed. If it is held on its stowage hooks on the door, the slide is disarmed. On a fully automatic installation a lever on the door, marked engage and detach, moves the floor fittings so the bar is connected or released as the door closes or opens. On a semi-automatic installation the cabin crew lift the bar into or out of the floor fittings by hand. A flag or light on the door shows when it is armed, and a red manual inflation handle is fitted on the slide in case the automatic inflation fails.
Part 4 · Escape slides
Armed: opening the door deploys the slide Armed : girt bar fixed to the floor, so the opening door pulls the pack apart and the slide drops outInflation then starts automatically Disarmed : the bar moves with the door; the door opens normallySlides are armed and disarmed only from inside Opening from outside disarms the slide, protecting ground staff and rescuers DISARMED (manual) girt bar on the door door opens normally; slide stays in its pack for boarding, catering ARMED (automatic) girt bar in floor fittings opening the door pulls the slide out and inflates it for taxi, flight, landing Armed and disarmed only from INSIDE the cabin Opening from outside disarms the slide first
Chapter 16 · Emergency Lighting, Exits and Slides
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us see why the girt bar matters. Here is the door from the cabin side, with the slide pack on its lower part. The cabin crew arm the slide, and the girt bar moves down into the floor fittings, so the slide is now armed. Now the door opens outwards. Because the bottom of the slide is fixed to the floor while the pack moves away with the door, the pack is torn open and the slide drops out of the doorway. That pull also fires the inflation system, and the slide inflates automatically. If the slide had been disarmed, the bar would have stayed on the door and the door would simply have opened. Arming and disarming are done only from inside the cabin. Opening the door from outside disarms it first, so a rescuer or a member of the ground staff opening the door will not be hit by an inflating slide.
Part 4 · Escape slides
How a slide inflates Integral gas bottle : normally CO2 with nitrogen, at high pressureGas drives aspirators that draw in large volumes of outside air Inflated in a few seconds, ready to use Auto-inflation fails → pull the red manual inflation handle : it fires the same bottle A hand pump (on slide-rafts) is only for topping up gas bottle CO2 + N2, about 3000 psi aspirator outside air in slide inflates in about 5 to 10 s If it fails to inflate: pull the red manual inflation handle (fires the same bottle) Hand pump (slide-raft): only for topping up
Chapter 16 · Emergency Lighting, Exits and Slides
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
How does a slide fill so quickly? It carries its own gas bottle, an integral cylinder normally charged with carbon dioxide and nitrogen at high pressure, around three thousand p s i. When the slide is deployed the bottle discharges, and you can see its pressure falling on the gauge. The gas does not fill the slide by itself. It is blown through an aspirator, a jet pump, which draws in a much larger volume of outside air with it. Within a few seconds, typically five to ten, the slide tubes are rigid and ready. If the automatic system fails, a cabin crew member pulls the red manual inflation handle, which opens the same integral bottle. Manual inflation is not done by blowing or pumping. A hand pump is carried on slide-rafts, but it is only used to top up the tubes later, when the slide is floating as a raft and has lost some pressure.
Part 4 · Escape slides
Types of slide Every slide is self-supporting , inflated from its own bottle, and lit at night.
Single-lane slide The basic self-supporting slide at a floor-level door.
Dual-lane slide Wide doors on large aircraft: two people side by side.
Slide-raft Detached at the girt bar, it floats as a raft; on the largest types up to about 60 people.
Off-wing ramp Takes people from the overwing exit down off the wing's trailing edge.
Chapter 16 · Emergency Lighting, Exits and Slides
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Slides come in several forms. The basic one is the single-lane slide at a normal floor-level door. Large aircraft with wide doors use dual-lane slides, so two people can go down side by side and the ninety second target can be met. On aircraft that fly long distances over water, many of the door slides are slide-rafts. After a ditching the crew detach the slide from the aircraft at the girt bar and it floats as a raft; on the biggest types it can carry up to about sixty people. Some overwing exits have an off-wing ramp, an inflatable slide that carries people from the wing down to the ground at the trailing edge. What they all have in common is that they are self-supporting, inflated by their own gas supply, and lit by the exterior emergency lights at night.
Part 5 · Standards
The 90-second evacuation Types with more than 44 passenger seats must show a full evacuation in 90 seconds Full passenger load, using only half the exits In darkness , with only the emergency lighting Slides and exits sized and placed to meet it Fire can make a cabin unsurvivable in a few minutes: speed saves lives 0 30 60 90 90 seconds Who more than 44 passenger seats Load full load of passengers and crew Exits half usable: one of each pair Light dark: emergency lighting only Goal all on the ground in 90 s The design standard behind exits, slides and lighting
Chapter 16 · Emergency Lighting, Exits and Slides
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
All of this equipment is designed around one standard. An aircraft type with more than forty four passenger seats must show that a full load of passengers and crew can leave the aircraft and reach the ground in ninety seconds. The test is deliberately hard. Only half the exits may be used, typically one from each pair, as if the other side were blocked by fire. The cabin is dark, lit only by the emergency lighting. Real passengers of mixed ages take part, with obstacles such as bags in the aisle. Why ninety seconds? Because a fuel-fed fire outside can burn through the fuselage and fill a cabin with toxic smoke within a few minutes. So the number of exits, the width of the slides, the floor path lighting and the crew drills are all chosen to get everybody out inside that time.
Part 5 · Rescue
Cut-in (break-in) areas A second way in for rescuers if the exits are blocked or jammed Marked by right-angled corners , red or yellow , outlined in white for contrast Corners more than 2 m apart: intermediate marks 9 cm × 3 cm , so no gap exceeds 2 m Not a weak point : an area with no control runs, cables or major stringers behind itExpected on larger public transport aircraft (the figure often quoted is above 3,600 kg) 9 cm × 3 cm marks if corners are more than 2 m apart CUT HERE IN EMERGENCY clear of control runs, cables, pipes Right-angled corner marks, red or yellow Outlined in white if needed for contrast Not a weak point in the structure
Chapter 16 · Emergency Lighting, Exits and Slides
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
If the exits are blocked, jammed or under fire, rescuers need another way in. So parts of the fuselage are marked as cut-in areas, also called break-in points. Each is a rectangle shown only by its right-angled corner marks, painted red or yellow, and outlined in white if they need more contrast against the paint. If the corners are more than two metres apart, intermediate marks nine centimetres by three centimetres are added, so that no gap between marks is more than two metres. An important exam point: a cut-in area is not a weaker part of the structure. It is simply a place where the rescue crew can saw through the skin without hitting flying control runs, electrical looms, pipes or a lot of stringers. It is not lit by the emergency lights, and there is no rule that a crash axe must be stowed beside it.
Part 5 · Ground operations
Exits when refuelling with passengers on board Situation Exits to be ready Any type (20 seats or more; not with AVGAS or wide-cut fuel) At least two main doors , preferably at opposite ends , ready for a rapid evacuation; areas under exits and slide paths kept clear ; qualified crew on board Wide-body with automatic slides, loading bridge in use No extra steps needed; one rear door (left or right) manned and ready, slide armedWide-body with automatic slides, no bridge Steps at the open main boarding door; a rear door manned with its slide ready No automatic slides, bridge in use Steps at another open door , preferably at the opposite end No automatic slides, no bridge Steps at two main doors (one forward, one aft), both open
Integral airstairs count as one exit each. Seat belts unfastened, NO SMOKING on, cabin lights on to show the exits.
Chapter 16 · Emergency Lighting, Exits and Slides
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Exits matter on the ground too. Airlines may refuel while passengers are boarding, leaving, or sitting on board, but only with precautions, and the exits are central to them. It is not allowed with fewer than twenty seats, or with avgas or wide-cut fuel. There must be at least two main doors, preferably at opposite ends of the aircraft, ready for an evacuation, with the ground under the exits and slide areas kept clear. For a wide-body with automatic slides on a loading bridge, no extra steps are needed, but one rear door must be manned constantly by a cabin attendant, ready to use with its slide. Without a bridge, steps go at the open main door. An aircraft without automatic slides needs steps at another open door if a bridge is used, and with no bridge, steps at two main doors, one forward and one aft, both open.
Summary
Emergency lighting, exits and slides Talk PA mic at each floor-level exit. Megaphones above 60 seats: 61–99: 1 , 100+: 2 per deck.
Light >9 seats: own supply. Floor path marking >19 seats. 10 min minimum. OFF–ARMED–ON guarded; cabin ON overrides.
Torches Each crew station and floor-level exit. Flashing red = serviceable .
Exits Outlined by a 5 cm (2 in) band. Sill > 1.83 m (6 ft) gear down → descent aid. Plug hatches open inwards .
Slides Girt bar in floor = armed , from inside only . Integral gas bottle + aspirator; red manual handle; hand pump tops up.
Standards 90 s with half the exits (>44 seats). Cut-in corners red/yellow, white outline, marks every 2 m .
Chapter 16 · Emergency Lighting, Exits and Slides
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. To talk, there is a P A microphone at every floor-level exit, and megaphones once there are more than sixty seats: one for sixty one to ninety nine, two for a hundred or more, per deck. To see, any aircraft with more than nine seats has emergency lighting with its own supply, floor path marking from twenty seats, and a minimum duration of ten minutes. The flight deck switch is off, armed and on, guarded at armed, and the cabin can override it. Torches flash red to show they are serviceable. Exits are outlined by a two-inch band, and any sill more than six feet above the ground needs a descent aid. Plug hatches come inwards. Slides are armed by putting the girt bar in the floor, from inside only, and inflate from their own gas bottle. Finally, the ninety second rule and the red or yellow corners of the cut-in areas.