Aircraft Systems · Chapter 21
Aviation Fuels AVGAS, MOGAS and the turbine fuels: grades, colours and labels, water, microbes and wax, and how fuel behaves with altitude and temperature.
100LL 100 JET A-1
blue green clear to straw
water settles to the bottom
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to the first of two lessons on fuel. Before we look at tanks, pumps and gauges, we need to understand the liquid itself. In this lesson you will meet the piston engine fuels, AVGAS and MOGAS, and the turbine fuels, Jet A one, Jet A and the wide-cut Jet B. You will learn how to tell them apart by colour and by the labels on fuelling equipment, why a cloudy sample is a warning, and what water, microbes and wax can do inside a fuel system. Finally we will look at how fuel behaves as the aircraft climbs and as the temperature changes: boiling and vapour lock, and the difference between litres and kilograms, which has caught out more than one crew. Let us begin.
Roadmap
What this lesson covers An engine is only as reliable as the fuel that reaches it. We study the fuel first, then the systems in the next lesson.
1 · Fuel types The ideal fuel, AVGAS grades, octane and detonation, MOGAS , and the turbine fuels Jet A-1, Jet A, Jet B .
2 · Identification Dye colours , natural colour of kerosene, labels on vehicles and hydrants, and misfuelling.
3 · Contamination Water , cloudy samples, ice, microbial growth , additives, fuel heating.
4 · Physical behaviour Waxing , boiling and vapour lock, specific gravity , litres versus kilograms.
Chapter 21 · Aviation Fuels
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the plan for this lesson. In part one we ask what an ideal aviation fuel would look like, then meet the real fuels: AVGAS for piston engines, with its octane ratings and the problem of detonation, the restricted use of motor gasoline, and the three turbine fuels, Jet A one, Jet A and Jet B. In part two we learn to identify them, by dye colour, by the natural colour of kerosene, and by the labels on fuelling vehicles, and we see what happens when the wrong fuel goes in. Part three is contamination: water, cloudy samples, ice crystals, microbes, and the additives and heaters that fight them. Part four is physical behaviour: wax at low temperature, boiling at high altitude, and the way specific gravity changes with temperature, which is why we load fuel by mass.
Part 1 · Fuel types
What would the ideal aviation fuel do? No real fuel meets every wish at an acceptable cost, so each fuel specification is a compromise .
Flow easily Pump and flow freely in all conditions , hot or cold, at any altitude.
Burn completely Complete combustion in every condition, with no unburnt residue.
High calorific value Plenty of energy per kilogram , so less fuel mass is carried for the same range.
Non-corrosive Must not attack tanks, sealants, pipes or engine parts.
Clean by-products Combustion products must not damage the engine .
Low fire hazard Hard to ignite by accident on the ground or after a crash.
Easy starting Vaporise and light readily, even when cold.
Lubricity Lubricate the fuel pumps and fuel control parts it flows through.
Chapter 21 · Aviation Fuels
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us start with a wish list. The ideal aviation fuel would flow easily in every condition, from a hot apron to the cold of high altitude. It would burn completely, leaving nothing behind. It would have a high calorific value, meaning lots of energy in every kilogram, so we could carry less weight for the same range. It would not corrode tanks or engines, and its combustion products would not harm the engine. It would carry a low fire hazard, yet start the engine easily, even when cold. And because the fuel itself lubricates the pumps and control units it flows through, it should have good lubricity. Notice that some of these fight each other: a fuel that vaporises easily for starting is also more of a fire risk. Meeting every wish would cost far too much, so every real fuel is a compromise.
Part 1 · Fuel types
The family of aviation fuels
Aviation fuels
Piston engines: gasoline
spark ignition, needs anti-knock value
Gas turbines: kerosene
continuous burning, no knock rating
AVGAS
aviation gasoline, dyed
80 · 100LL · 100 · 115
SG about 0.72
MOGAS
motor gasoline
only in approved
engine/airframe combinations
AVTUR (kerosene)
Jet A-1: worldwide, SG 0.80
Jet A: mainly the USA
undyed: clear to straw
AVTAG (wide-cut)
Jet B: gasoline + kerosene
SG 0.77, low flash point
rarely used in civil aircraft
AVTUR = aviation turbine fuel; AVTAG = aviation turbine gasoline. Piston fuels are graded by anti-knock value ; turbine fuels are not.
Chapter 21 · Aviation Fuels
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Aviation fuels fall into two families. Piston engines burn gasoline. The proper fuel is AVGAS, aviation gasoline, made to a strict specification and sold in grades named by their anti-knock value, such as one hundred L L. Motor gasoline, called MOGAS, can be used only in certain engine and airframe combinations that have been approved for it. Gas turbines burn kerosene-based fuels. The British name is AVTUR, aviation turbine fuel, and the grade you meet almost everywhere is Jet A one, with Jet A as a similar grade used mainly in the United States. The other turbine family is AVTAG, aviation turbine gasoline, which is the wide-cut fuel Jet B, a mixture of gasoline and kerosene. Keep this tree in your head: the exam loves to mix up the names, the colours and the specific gravities of these fuels.
Part 1 · Piston fuels
Detonation and the octane rating Detonation : unburnt end gas explodes spontaneously instead of burning smoothly: pressure spike, overheating, piston damageRisk rises with compression ratio , boost , high cylinder temperature and lean mixture The octane rating is the fuel's resistance to detonation: higher octane suits high-compression, high-performance engines A performance number such as 100/130 : weak-mixture rating / rich-mixture rating Anti-knock additive in AVGAS: tetraethyl lead , so the grades differ in lead content Using a lower grade than approved invites detonation; a higher grade is normally acceptable
TDC
-60°
-30°
0°
30°
60°
90°
crank angle
cylinder pressure
detonation
end gas explodes:
pressure spike
normal burning
smooth flame front
Higher octane fuel resists detonation at higher compression and boost
Chapter 21 · Aviation Fuels
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why do piston fuels have grades at all? The answer is detonation. Normally the spark lights the mixture and a smooth flame front sweeps across the cylinder, so pressure rises steadily, as the blue curve shows. If the fuel cannot stand the heat and pressure, the last part of the mixture, the end gas, explodes all at once before the flame reaches it. That is detonation, the red trace: a violent pressure spike that hammers the piston, overheats the cylinder and can destroy an engine in minutes. High compression ratios, supercharger boost, hot cylinders and weak mixtures all make it more likely. The octane rating measures a fuel's resistance to detonation, so higher octane fuel is needed for high-performance engines. AVGAS grades carry two numbers, such as one hundred over one thirty: the first is the weak-mixture rating and the second the rich-mixture rating. The anti-knock additive is tetraethyl lead.
Part 1 · Piston fuels
AVGAS grades Every AVGAS grade is dyed so it can be recognised at a glance. All have an SG of about 0.72 .
Grade Performance number Dye colour Lead content Notes AVGAS 80 80/87 Red Low Low-compression engines; now rare AVGAS 100LL 100/130 Blue Low lead (up to 0.56 g/L)The common grade worldwide AVGAS 100 100/130 Green High lead (up to 1.12 g/L)Same anti-knock value as 100LL AVGAS 115 115/145 Purple High Large high-power engines; largely withdrawn
Exam trap: AVGAS 100 and 100LL have the same anti-knock value (100/130) but different colours : green for 100, blue for 100LL.
Chapter 21 · Aviation Fuels
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the AVGAS grades. Every grade is dyed so you can tell it apart by eye, and they all have a specific gravity of about nought point seven two. AVGAS eighty, rated eighty over eighty-seven, is dyed red and is now rare. The grade you will meet almost everywhere is AVGAS one hundred L L, rated one hundred over one thirty and dyed blue. L L stands for low lead. AVGAS one hundred has exactly the same performance number, one hundred over one thirty, but it contains about twice as much lead and is dyed green. That pair is a favourite exam question: same anti-knock value, different colour. Finally AVGAS one fifteen, rated one fifteen over one forty-five, was made for large high-power engines and has largely been withdrawn. The rule in practice: use the grade in the flight manual, and never a lower one.
Part 1 · Piston fuels
MOGAS: motor gasoline in aircraft Allowed only in approved engine and airframe combinations , under the conditions the authority publishes Lower anti-knock value than AVGAS: detonation margin is smaller Higher volatility : much more prone to vapour lock and carburettor icing May contain alcohol (ethanol) , which attacks some seals and absorbs water; not acceptable unless approved Quality control at a roadside pump is weaker than at an aviation fuel installation Guidance on its use is published in the authority's general aviation safety leaflets
Why higher volatility hurts
1 · Vapour lock
warm line, low pressure: fuel boils into vapour bubbles
the pump moves vapour, not liquid: the engine starves
2 · Carburettor icing
more fuel
evaporates:
extra cooling
ice
Use MOGAS only where the aircraft is approved for it
Chapter 21 · Aviation Fuels
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Motor gasoline, MOGAS, is cheaper and easier to find than AVGAS, so it is tempting. It may be used only in particular engine and airframe combinations that have been approved for it, and only under the conditions the authority lays down; in the United Kingdom, for example, guidance appears in the general aviation safety sense leaflets. Why the caution? First, its anti-knock value is lower, so the detonation margin shrinks. Second, and most examined, it is more volatile. A volatile fuel boils easily in a warm fuel line at low pressure, forming vapour bubbles that the pump cannot move, so the engine starves. That is vapour lock. Volatile fuel also evaporates strongly in the carburettor, cooling the venturi further and making carburettor icing more likely. Some motor fuels also contain alcohol, which attacks certain seals and absorbs water.
Part 1 · Turbine fuels
Jet A-1, Jet A and Jet B compared Property Jet A-1 (AVTUR) Jet A Jet B (AVTAG) Type Kerosene Kerosene Wide-cut : gasoline + keroseneNominal SG at 15 °C 0.80 about 0.80 0.77 Flash point 38 °C minimum 38 °C minimum Very low (about −20 °C)Freezing (waxing) point −47 °C maximum −40 °C about −50 to −60 °C Boiling range Narrow, high Narrow, high Wider Where used The world standard Mainly the USA Very cold regions, military Colour Undyed: clear to straw Undyed Undyed
Jet B can replace Jet A-1 where approved, but it is more volatile and more flammable , so it is not generally used in civil transport aircraft.
Chapter 21 · Aviation Fuels
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now the turbine fuels side by side. Jet A one is the world standard kerosene, with a nominal specific gravity of nought point eight at fifteen degrees, a flash point of at least thirty-eight degrees, and a freezing point no higher than minus forty-seven. Jet A is almost the same fuel, but its freezing point is higher, minus forty, and it is found mainly in the United States; on long cold flights that difference matters. Jet B is different in kind. It is a wide-cut blend of gasoline and kerosene, with a specific gravity of about nought point seven seven, a very low flash point, a wider boiling range and a lower waxing point. That low waxing point helps in very cold climates, but its volatility makes it far more flammable, which is why it is rarely used in civil transport aircraft. None of the turbine fuels is dyed.
Part 1 · Turbine fuels
Why wide-cut fuel is treated with suspicion Wide-cut means a wide band of boiling points, from the gasoline range up into the kerosene rangeIts light fractions make it more volatile and more flammable than kerosene, with a low flash point Its vapour above the fuel is often in the flammable range at normal temperatures Higher vapour pressure: more boiling and vapour loss at altitude Lower SG (0.77): the engine fuel control may need adjustment when changing from Jet A-1 Passengers must disembark if wide-cut fuel is loaded
Typical boiling ranges
0
50
100
150
200
250
300
AVGAS
30 – 170 °C
Jet B
(wide-cut)
50 – 250 °C
Jet A-1
(kerosene)
150 – 300 °C
boiling temperature (°C)
Wide-cut = gasoline + kerosene fractions: volatile, low flash point
typical figures; each batch varies within its specification
Chapter 21 · Aviation Fuels
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
The term wide-cut needs explaining. When crude oil is distilled, fractions boil off over a range of temperatures. Kerosene, like Jet A one, is a narrow, fairly heavy cut that boils between roughly one hundred and fifty and three hundred degrees. AVGAS is a light cut that boils much lower. A wide-cut fuel such as Jet B takes a broad slice that spans both, so it contains light, gasoline-like fractions. Those light fractions give it a low flash point and high volatility. At ordinary temperatures the vapour above it in a tank can be in the flammable range, so a spark or a crash fire is far more dangerous. It also loses more fuel by boiling at altitude, and because its specific gravity is lower, the engine fuel control may need adjusting. For refuelling the rule is simple: passengers must disembark whenever wide-cut fuel is being loaded.
Part 2 · Identification
Telling fuels apart by colour
AVGAS 80 · red AVGAS 100LL · blue AVGAS 100 · green Jet A-1 · clear to straw
AVGAS is dyed; turbine fuels keep their natural colour
A good sample is clear and bright : no haze, no sediment, no free water. A colour change can mean mixed grades .
Chapter 21 · Aviation Fuels
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Colour is the first check in any fuel sample. AVGAS is dyed by grade: AVGAS eighty is red, one hundred L L is blue and one hundred is green. Turbine fuels are not dyed at all. Jet A one keeps its natural colour, which can be anything from completely colourless to a pale straw yellow. So a blue sample from a jet aircraft, or a straw-coloured sample from a piston aircraft, is an immediate warning that the wrong fuel has gone in. A mixture of grades may also show an odd colour, or lose its dye altogether. Whatever the fuel, a good sample should be clear and bright: no haze, no sediment, and no drops of free water at the bottom of the jar. Take the sample from the tank drains before the first flight of the day and after refuelling, once the fuel has had time to settle.
Part 2 · Identification
Labels on fuelling vehicles and pipelines Turbine fuel (AVTUR, Jet A-1, Jet A, Jet B): grade in white letters on a black background AVGAS : the word AVGAS and the grade (e.g. 100LL) in white letters on a red background Labels are placed prominently on bowsers, hydrant dispensers and their pipework Aircraft filler points carry the fuel type and grade beside the cap Different nozzle sizes help: the wide jet-fuel nozzle should not fit an AVGAS filler neck The pilot remains responsible for checking the right fuel went in
JET A-1
AVGAS 100LL
turbine fuel: white on black AVGAS: white on red + grade
pipeline and hose bands (right) use the same colours
Chapter 21 · Aviation Fuels
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Fuelling equipment is marked so that the grade can be read at a glance. Vehicles and hydrant dispensers that deliver turbine fuel carry prominent labels with the word AVTUR, or the grade, Jet A one, Jet A or Jet B, printed in white letters on a black background. Vehicles that deliver AVGAS carry the word AVGAS and the grade, such as one hundred L L, in white letters on a red background. The pipelines and hoses of the fuelling system follow the same scheme: black for jet fuel, red for AVGAS. Remember it as a pair: jet is black, gas is red. On the aircraft, the filler points are marked with the fuel type and minimum grade. Some systems also use different nozzle sizes so that a wide jet fuel nozzle should not fit into an AVGAS filler neck. Even so, the pilot must still check that the right fuel was delivered.
Part 2 · Identification
Misfuelling: when the wrong fuel goes in Jet fuel in a piston engine Kerosene has almost no anti-knock value : severe detonation and power loss, often just after take-off on the AVGAS left in the lines.
AVGAS in a turbine Lead deposits on turbine parts and higher volatility. Permitted only within the limits of the flight manual .
Jet B instead of Jet A-1 Different SG and volatility: the engine fuel control may need adjustment ; more fire risk on the ground.
Unapproved MOGAS Detonation, vapour lock and carburettor icing; alcohol may attack seals.
Defences Grade labels at the filler, colour-coded equipment, nozzle sizes, and a signed delivery note checked by the crew.
If in doubt Do not fly. Drain and sample the tanks; an engineer decides on draining and flushing.
Chapter 21 · Aviation Fuels
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Misfuelling still happens, so know the consequences. The worst case is jet fuel in a piston engine. Kerosene has almost no anti-knock value, so the engine detonates badly and loses power. Because some AVGAS remains in the lines, the engine often starts and runs normally for the take-off, then fails shortly afterwards, which is a deadly combination. AVGAS in a turbine engine is less immediately dangerous, and some flight manuals allow limited use, but the lead fouls turbine parts and the fuel is more volatile. Jet B delivered instead of Jet A one changes the specific gravity and volatility, so the fuel control or governor may need adjusting and the ground fire risk rises. Unapproved MOGAS brings detonation, vapour lock and icing. The defences are labels, colour codes, nozzle sizes and a delivery note the crew actually checks. If in doubt, do not fly.
Part 3 · Contamination
Water in fuel and how to drain it Some water is always present : dissolved , suspended (entrained droplets) or free (a layer) Sources: storage and transfer, and condensation from the moist air in a part-empty tank Water is heavier than fuel , so if the fuel is allowed to settle , droplets sink to the lowest point It is removed through the water drain valves at the lowest point of each tank Kerosene is denser and more viscous than AVGAS, so water settles more slowly in jet fuel Sample before the first flight and after refuelling, once the fuel has settled
fuel settles free water layer drain valve sample jar
Chapter 21 · Aviation Fuels
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Water is always present in fuel to some extent. It can be dissolved, invisible, like humidity in air; suspended as tiny entrained droplets; or free, lying as a separate layer. Some comes from storage and transfer, however good the quality control, and some condenses out of the moist air inside a part-empty tank. The key fact is that water is heavier than fuel. So if the fuel is allowed to settle after refuelling, the droplets sink, as you can see, and collect at the lowest point of the tank. That is exactly where the water drain valve is fitted. Drain into a clear sample jar until only clean fuel comes out. Be patient with jet fuel: kerosene is denser and more viscous than AVGAS, so water takes much longer to settle out of it. That is why sampling is done before the first flight of the day.
Part 3 · Contamination
A cloudy sample: air or water? A cloudy or hazy sample is a warning: let it stand and watch which way it clears Air : the haze rises quickly and the sample clears from the bottom up ; harmlessWater : the haze falls slowly and the sample clears from the top down ; drops collect at the bottomIn the exam, a cloudy sample most probably means water contamination A water-contaminated sample means more draining, and a check of the source if it persists
Air Water
rises quickly clears bottom up falls slowly clears top down
Chapter 21 · Aviation Fuels
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Sometimes a fuel sample looks cloudy or hazy. Do not throw it away; let it stand and watch it. If the cloudiness rises quickly towards the top, the haze is air, tiny bubbles stirred in by the sampling, and the sample clears from the bottom up within moments. That is harmless. If instead the cloud sinks slowly towards the bottom, it is water: fine droplets settling through the fuel, so the sample clears from the top down and a layer of water may collect at the bottom of the jar. In practice, and in the exam, a cloudy sample most probably means water contamination. The response is to keep draining until the samples are clear and bright, and if water keeps appearing, to check the source: the storage, the bowser, or a leaking filler cap seal.
Part 3 · Contamination
How water becomes ice in flight Warm fuel holds more dissolved water than cold fuel As the aircraft climbs, the fuel cools and dissolved water comes out as droplets Below 0 °C the droplets freeze into ice crystals carried with the fuel Ice collects on the low-pressure fuel filter and can block it ; a bypass then opens and the filter-bypass light comes on Defences: fuel heating (heater and fuel-cooled oil cooler) and, in some fuels, an icing inhibitor
1 · On the ground, +25 °C
2 · Climbing, fuel cools
3 · Below 0 °C
4 · At the LP filter
water dissolved, invisible
filter blocks
Chapter 21 · Aviation Fuels
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is how water turns into a blockage. Fuel at twenty-five degrees on a warm apron holds a certain amount of water dissolved in it, quite invisibly. As the aircraft climbs, the fuel in the tanks gets colder, and cold fuel cannot hold as much dissolved water. The excess comes out of solution as tiny droplets. Once the fuel temperature falls below zero, those droplets freeze into ice crystals that travel with the fuel. The first fine mesh they meet is the low-pressure fuel filter in the engine system, and there they collect and can block it. When that happens a bypass valve opens to keep fuel flowing, and the crew see a filter bypass indication. The defences are heating the fuel before it reaches the filter, and in some fuels an icing inhibitor additive. We look at both next.
Part 3 · Contamination
FSII: the fuel system icing inhibitor FSII dissolves preferentially into any free water in the fuelIt lowers the freezing point of that water, so it stays liquid instead of forming ice crystals It is also a biocide : it suppresses the fungus that grows in water Blended at the refinery or injected at uplift in a small, controlled dose Standard in military fuel; in civil Jet A-1 used where the aircraft has no fuel heater or the operator requires it
Without FSII
With FSII
fuel at −20 °C
fuel at −20 °C
droplets freeze
droplets stay liquid
• ice crystals reach the filter • filter blocks, bypass opens • fungus thrives in water
• freezing point of water falls • droplets drain or pass • fungal growth suppressed
purple dots = inhibitor
Chapter 21 · Aviation Fuels
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
FSII stands for fuel system icing inhibitor. It is a chemical that prefers water to fuel, so any free water in the tank absorbs it. Water with inhibitor dissolved in it has a much lower freezing point, rather like antifreeze in a car radiator, so the droplets stay liquid at temperatures where they would otherwise turn into ice crystals and block the filters. FSII does a second job as well: it is a biocide, suppressing the fungus that grows wherever water sits in a fuel tank. It is blended in at the refinery or injected at the time of refuelling, in a small and carefully controlled dose. Military jet fuel always contains it. In civil Jet A one it is often absent, because most airliners heat their fuel instead, but it is used where an aircraft has no fuel heater or the operator requires it.
Part 3 · Contamination
Microbial growth in fuel tanks A fungus (Cladosporium resinae , now called Hormoconis resinae) and bacteria live in all turbine fuels They need water : they grow at the fuel–water interface , feeding on the fuel They form mats of slimy filaments , green, brown or black, that block filters , pump inlets and gauging probes Their waste is acidic and corrodes the tank structure and especially the tank sealant Control: drain water regularly, keep tanks clean, use FSII or a biocide
fuel: the food water: where it lives
fungal mats at the interface
acid by-products: pitting and sealant damage
filaments break off and block filters and pump inlets
Chapter 21 · Aviation Fuels
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Fuel tanks can grow a garden. A fungus, known in older books as Cladosporium resinae and today as Hormoconis resinae, together with various bacteria, is present in all turbine fuels. These microbes need water to live, so they grow at the boundary between the fuel and any water lying at the bottom of the tank, feeding on the fuel itself. Given time they form mats of slimy filaments, green, brown or black, which break off and block filters, pump inlets and gauging probes, and can even upset the fuel quantity indication. Worse, their waste products are acidic. They corrode the tank structure and attack the sealant that keeps an integral tank fuel-tight. The cure starts with prevention: drain the water regularly so they have nowhere to live, keep the tanks clean, and use FSII or a dedicated biocide when contamination is found.
Part 3 · Contamination
Jet fuel additives and what they do Additives are blended in at the refinery or at the airfield to improve how the fuel behaves.
Additive Purpose FSII (icing inhibitor)Keeps free water from freezing into ice crystals; also suppresses fungal growth Lubricity agent (e.g. HITEC)Reduces wear in fuel pumps and the fuel control unit Static dissipator Raises the fuel's conductivity so static charge from high-rate refuelling and defuelling drains away Corrosion inhibitor Protects ferrous pipelines and storage tanks; some also improve lubricity Metal deactivator Suppresses the catalytic effect of metals, especially copper , on fuel oxidation Antioxidant Stops gums and peroxides forming in storage Biocide Kills microbial growth when contamination is found
Chapter 21 · Aviation Fuels
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the additives you should know. FSII, the icing inhibitor, keeps free water liquid and suppresses fungus. A lubricity agent, often known by the trade name HITEC, reduces wear in the fuel pumps and the fuel control unit, because highly refined fuel is a poor lubricant. A static dissipator raises the electrical conductivity of the fuel, so the charge generated when fuel rushes through filters and hoses at high flow rates, particularly during refuelling and defuelling, can leak away instead of building up to a spark. Corrosion inhibitors protect iron and steel pipelines and storage tanks, and some of them also improve lubricity. A metal deactivator suppresses the way some metals, copper in particular, speed up the oxidation of fuel. Antioxidants stop gums forming in storage, and biocides kill microbial growth once it has been found.
Part 3 · Contamination
Fuel heating: FCOC and fuel heater On a turbine engine, fuel is warmed before the low-pressure filter , so ice crystals melt before they can block it Fuel-cooled oil cooler (FCOC) : hot engine oil warms the fuel, and the fuel cools the oil Fuel heater : a heat exchanger using hot compressor delivery air completes the jobHeaters may be automatic or crew-selected, keeping a set fuel temperature The same warmth also helps against waxing
LP pump
FCOC
Heater
LP filter
hot engine oil
compressor delivery air
fuel warmed before the filter: ice crystals melt
Chapter 21 · Aviation Fuels
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
On a gas turbine, the fuel is warmed on its way from the low-pressure pump to the low-pressure filter, so that any ice crystals melt before they can block the filter. The first stage is the fuel-cooled oil cooler. Hot engine oil flows through one side of this heat exchanger and cold fuel through the other, so the fuel is heated and the oil is cooled. It does two useful jobs at once, and the exam likes to ask which way round it works: it heats the fuel and cools the oil. The second stage is the fuel heater, another heat exchanger, which uses hot compressor delivery air to finish warming the fuel. On some aircraft the heater works automatically to keep a set fuel temperature; on older types the flight engineer selected it. Then the warmed fuel passes through the filter. The same heat also helps against wax.
Part 4 · Physical behaviour
Waxing: fuel at very low temperature Waxing : heavy hydrocarbons come out of the fuel as paraffin wax crystals at low temperatureWax clogs filters and upsets the fuel control unit ; eventually the fuel will not flow Minimised by the refinery keeping heavy hydrocarbons low, and by fuel heating in the engine system Freezing points: Jet A-1 −47 °C , Jet A −40 °C On long cold flights the tank fuel cools towards the total air temperature ; crews keep a margin, typically 3 °C, above the freezing point Remedy: fly faster (more ram rise) or change level to warmer air
20
10
0
-10
-20
-30
-40
-50
0
2
4
6
8
10
12
fuel temperature in the tank
limit −44 °C (freezing point + 3 °C)
TAT −50 °C
Jet A-1 freezes −47 °C (blue band)
hours in cruise
temperature (°C)
illustrative cold-soak model: the fuel cools towards TAT with a time constant of 4 h
Chapter 21 · Aviation Fuels
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Waxing is the fuel version of a frosty morning. As kerosene gets very cold, its heaviest hydrocarbons come out of solution as crystals of paraffin wax. Those crystals clog the fuel filters and interfere with the fuel control unit, and at a low enough temperature the fuel turns into a slush that will not flow at all. The refinery limits the heavy fractions, and the engine fuel heating helps. The freezing point is part of the specification: minus forty-seven for Jet A one and minus forty for Jet A. In flight, fuel sitting in thin wing tanks slowly cools towards the total air temperature. The graph models a long cruise in very cold air: after about nine and a half hours the fuel reaches the crew's limit, three degrees above the freezing point. The remedies are to fly faster, which raises the total air temperature, or to change level into warmer air.
Part 4 · Physical behaviour
Boiling and vapour lock at altitude A liquid boils when its vapour pressure equals the pressure on its surface As the aircraft climbs, the pressure on the fuel falls, so its boiling point falls Vapour forms in the pipes: vapour lock starves the engine; the engine-driven pump may cavitate Cure: booster pumps in the tanks push fuel to the engine under pressure instead of the engine pump sucking it Tanks may also be slightly pressurised by ram air through the vents AVGAS and Jet B are far more at risk than Jet A-1
0
10 000
20 000
30 000
40 000
50 000
0
20
40
60
80
100
pressure altitude (ft)
pressure (kPa)
outside (ISA) pressure
AVGAS ≈ 49 kPa
boils ≈ 19 000 ft
Jet B ≈ 21 kPa
boils ≈ 38 000 ft
Jet A-1 < 1 kPa
vapour pressures for fuel at 38 °C (specification values)
Chapter 21 · Aviation Fuels
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
The temperature at which a liquid boils depends on the pressure on its surface; it boils when its own vapour pressure equals that pressure. As an aircraft climbs, the pressure on the fuel in the tanks falls, so the fuel boils at a lower and lower temperature. The graph shows the outside pressure falling with altitude, and the vapour pressures of three fuels on a hot day. Warm AVGAS could start boiling near nineteen thousand feet and Jet B near thirty-eight thousand feet, while Jet A one stays far below the curve. When fuel boils in the pipes, the vapour forms locks that cut off the supply and the engine stops, and an engine-driven pump sucking on boiling fuel cavitates. The cure is to push rather than pull: booster pumps in the tanks keep the whole line to the engine above vapour pressure. Ram air through the vents can also pressurise the tanks slightly.
Part 4 · Physical behaviour
Specific gravity changes with temperature Specific gravity (SG) = density of the fuel ÷ density of waterSG varies inversely with temperature : warm fuel expands, so a litre weighs less What matters is the mass : energy, aircraft weight and range all follow kilograms, not litres Modern gauging measures mass and compensates for SG Some engine fuel controls (the maximum rpm governor ) sense SG and need adjustment for a different-SG fuel such as Jet B
11 800
12 000
12 200
12 400
12 600
12 800
13 000
-40
-25
-10
5
20
35
50
11 910 L · SG 0.840
12 500 L · SG 0.800
12 910 L · SG 0.775
fuel temperature (°C)
volume of 10 000 kg (litres)
Same 10 000 kg: same energy, same weight, different litres
density falls by about 0.72 kg/m³ per °C from 800 kg/m³ at 15 °C
Chapter 21 · Aviation Fuels
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Specific gravity is the density of the fuel divided by the density of water. Jet A one has a nominal specific gravity of nought point eight at fifteen degrees, so a litre weighs about eight hundred grams. The important point is that specific gravity varies inversely with temperature. Warm the fuel and it expands, so each litre weighs a little less. The graph shows ten thousand kilograms of Jet A one: about eleven thousand nine hundred litres at minus forty, twelve thousand five hundred at fifteen degrees, and twelve thousand nine hundred at fifty. The mass, and so the energy and the weight, never changed. That is why fuel is planned and loaded by mass, and why the quantity gauges on large aircraft read in kilograms and compensate for density. One exam point: some engine fuel controls, like the maximum r p m governor, are sensitive to specific gravity and need adjusting if a fuel such as Jet B is loaded.
Part 4 · Physical behaviour
Worked examples: litres, gallons and kilograms Mass = volume × SG (litres × SG = kg)Volume = mass ÷ SG (kg ÷ SG = litres)1 US gallon = 3.785 L ; 1 imperial gallon = 4.546 L ; 1 kg = 2.205 lb Always check the units on the delivery note and the gauge: litres, gallons, kg or lb Cross-check: fuel on board before + uplift = fuel on board after
1 · Litres to kilograms
18 000 L of Jet A-1 at SG 0.79
18 000 × 0.79 = 14 220 kg
2 · Kilograms to litres
uplift needed 12 000 kg, SG 0.785
12 000 ÷ 0.785 = 15 287 L
3 · US gallons to kilograms
4 000 USG at SG 0.80
4 000 × 3.785 = 15 140 L
15 140 × 0.80 = 12 112 kg
Chapter 21 · Aviation Fuels
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us practise, because these sums appear in the exam and on the ramp. The rule is simple: mass equals volume times specific gravity, with litres and kilograms. Example one: eighteen thousand litres of Jet A one at a specific gravity of nought point seven nine weighs eighteen thousand times nought point seven nine, which is fourteen thousand two hundred and twenty kilograms. Example two goes the other way: if you need twelve thousand kilograms and the specific gravity is nought point seven eight five, divide, and you need about fifteen thousand two hundred and eighty-seven litres. Example three uses US gallons: four thousand gallons times three point seven eight five is fifteen thousand one hundred and forty litres, and at nought point eight that is twelve thousand one hundred and twelve kilograms. In nineteen eighty-three a Boeing seven six seven ran dry in flight after pounds were used in place of kilograms in exactly this sum. Always check the units.
Part 4 · Physical behaviour
Filling the tanks overnight: a double-edged sword Full tanks exclude the moist air , so less water condenses into the fuel overnight But if the day warms up, the fuel expands and can spill out through the vents Example: 20 000 L loaded at 10 °C becomes about 20 460 L at 35 °C Tanks therefore keep an expansion space (about 2% of tank volume) Full tanks may also make the aircraft too heavy for the payload or runway, forcing a defuel
Night · 10 °C
Midday · 35 °C
20 000 L, SG 0.804 ≈ 20 460 L, SG 0.786 ≈ 460 L more volume: out through the vent
Chapter 21 · Aviation Fuels
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is an old dilemma. Once fuel is in the tanks, the main source of new water is the moist air in the space above it, which condenses on cold tank walls overnight. If you fill the tanks right to the top, that air is excluded along with its moisture. So far, so good. But suppose the tanks were filled at ten degrees in the evening and the next day warms to thirty-five. The fuel temperature rises, and the fuel expands as it warms. Twenty thousand litres loaded cold becomes about twenty thousand four hundred and sixty litres, and with nowhere else to go, the extra fuel spills out through the vent system onto the apron. That is why tanks keep an expansion space of about two per cent. There is a second catch: full tanks may make the aircraft too heavy to carry its payload from that runway, so some fuel may have to be defuelled.
Summary
Aviation fuels: the points to remember Piston fuels AVGAS: 100LL blue , 100 green (same 100/130), 80 red. SG 0.72. MOGAS only where approved: vapour lock , carb icing.
Turbine fuels Jet A-1: SG 0.80, freezes −47 °C. Jet A: −40 °C, USA. Jet B: wide-cut , SG 0.77, volatile, flammable. All undyed .
Markings Jet fuel: white on black . AVGAS: white on red with the grade.
Water Settles, drained at the lowest point. Cloudy sample: air clears bottom up , water top down ; usually water.
Additives and heat FSII: anti-ice and anti-fungus. FCOC heats fuel, cools oil ; heater uses compressor air; warm before the LP filter.
Physics Wax at low temperature; boiling point falls with altitude, so booster pumps push . SG falls as temperature rises: load by mass .
Chapter 21 · Aviation Fuels
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. For piston engines, AVGAS one hundred L L is blue and AVGAS one hundred is green, with the same one hundred over one thirty rating; motor gasoline is allowed only where approved, and its volatility brings vapour lock and carburettor icing. For turbines, Jet A one is the standard kerosene at a specific gravity of nought point eight; Jet A freezes at minus forty; Jet B is the wide-cut, volatile, flammable fuel. Turbine fuels are undyed. Jet fuel equipment is labelled white on black, AVGAS white on red. Water settles and is drained at the lowest point; a cloudy sample clearing from the top down is water. FSII fights ice and fungus, the fuel-cooled oil cooler heats the fuel and cools the oil, and fuel is warmed before the filter. Finally, wax forms when cold, boiling comes with altitude, and because specific gravity falls as temperature rises, we always load fuel by mass. Next, we follow this fuel through the fuel system of the aircraft.