Electrics · Chapter 16
Basic Computers How aircraft computers count, store and process information: binary, octal and hexadecimal numbers, the CPU, memory and input and output devices, and conversion between analogue and digital.
CPU 0110 0000 128 64 32 16 8 4 2 1 96 = 64 + 32
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter sixteen is about basic computers. A modern airliner carries dozens of them: the flight management system, the flight guidance computers, the ground proximity and collision avoidance systems, and on fly-by-wire aircraft, the computers that actually move the controls. Every one of them works in binary, with nothing but ones and zeros. In this lesson you will learn to count in binary, octal and hexadecimal, meet the parts inside a computer and the different kinds of memory, and see how analogue sensor signals are turned into digital data and back again.
Roadmap
Basic computers: the plan for this lesson Every computer on the aircraft does three things: it takes in data, processes it with a stored program, and puts out results.
1 · What a computer is Analogue and digital computers, and why digital means binary.
2 · Numbers Binary, octal and hexadecimal; bits, bytes and words; positive and negative logic.
3 · Hardware CPU, clock, input and output devices, memory types and storage.
4 · On the aircraft A to D and D to A conversion, the FMS database and computer-controlled systems.
Chapter 16 · Basic Computers
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is our plan for this lesson. In part one we define a computer and compare the two types, analogue and digital, and see why digital computers work in binary. Part two is about numbers. You will learn to convert between decimal and binary in both directions, and meet octal and hexadecimal, the shorthand that engineers use for long binary numbers, together with bits, bytes and words, and the two ways of representing ones and zeros as voltages, positive and negative logic. In part three we open the box: the central processing unit with its arithmetic logic unit, registers, control unit and clock, the input and output devices, and the many kinds of memory. Part four brings it back to the aircraft: converting analogue sensor signals to digital and back, the flight management database, and the systems that are computer controlled.
Part 1 · What a computer is
What is a computer? A device that can store data and a program that operates on the data A general-purpose computer can be programmed for any problem put in logical and arithmetic terms First fully working general-purpose machine: the Z3 , Germany, 1941 : electromechanical and binary Two types: analogue and digital By far the most common is the digital computer or microprocessor A stored-program computer DATA PROGRAM PROCESS in binary RESULTS From relays to microprocessors 1941 Z3, Germany relays, binary 1950s valves, then transistors 1970s the microprocessor today dozens of computers on an airliner General purpose: any problem that can be put in logical and arithmetical terms
Chapter 16 · Basic Computers
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
A computer can be defined as a device, or a set of devices, that can store data and a program that operates on that data. A general-purpose computer can be programmed to solve any reasonable problem that can be expressed in logical and arithmetical terms. The first fully operational general-purpose computer was the Z3, built in Germany in nineteen forty-one. It was electromechanical, using relays, and, importantly, it worked in binary. The drawing shows the idea: data and a program held together and processed to give results, and the long road from relays, through valves and transistors, to the microprocessor. There are two basic types of computer, analogue and digital, which we compare next. By far the most common type today is the digital computer, or microprocessor, which now plays a part in almost every aspect of everyday life and certainly in every modern aircraft.
Part 1 · What a computer is
Analogue and digital computers Analogue : continuous physical quantities, such as voltage or pressure , represent the valuesUsed as models of real systems where testing the real thing is costly, slow or dangerous Example: how a bridge or a wing reacts to wind speed and temperature Digital : data as binary , two voltage levels only: ON or OFFDigital computers can now simulate moving systems, so analogue computers are less used Analogue: continuous any value: voltage, pressure, temperature… Digital: two states only 1 0 1 1 0 0 1 0 1 1 ON = 1 OFF = 0
Chapter 16 · Basic Computers
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
An analogue computer uses continuous physical variables, such as voltages or pressures, to represent the quantities it is working on. A voltage that rises and falls in proportion to a load, for example, is an analogue of that load. Analogue computers were used as electronic models of mechanical or other systems, in cases where experimenting on the real system would be too costly, too slow or too dangerous. When designing a bridge or an aircraft wing, the engineer must know beforehand how the structure will react to wind speed, temperature and so on, and an analogue model could show that. A digital computer works in a completely different way. Its data are binary: just two voltage levels, on or off. In recent years digital computers have become able to simulate moving physical systems, so analogue computers are now much less common, and the rest of this lesson is about digital computers.
Part 2 · Numbers
Why digital means binary Digital circuits are two-state circuits: a switch or transistor is ON or OFF So the computer counts in binary (base 2): only the digits 1 and 0 Decimal (base 10) uses ten digits, 0 to 9; columns are powers of 10 Binary columns are powers of 2 : 1, 2, 4, 8, 16, 32, 64, 128 … The rightmost digit is the least significant ; the leftmost the most significant Binary 101 2² 4 1 2¹ 2 0 2⁰ 1 1 4 + 1 = 5 Binary 111011 2⁵ 32 1 2⁴ 16 1 2³ 8 1 2² 4 0 2¹ 2 1 2⁰ 1 1 32 + 16 + 8 + 2 + 1 = 59 Add the column values wherever there is a 1; zeros count nothing.
Chapter 16 · Basic Computers
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Digital circuits are two-state circuits. Each transistor switch is either on or off, so the computer cannot count the way we do on paper, with ten digits from zero to nine. Instead it uses the binary system, base two, with only the digits one and zero. In decimal, each column is worth ten times the one to its right: units, tens, hundreds. In binary, each column is worth twice the one to its right: one, two, four, eight, sixteen, thirty-two, sixty-four, one hundred and twenty-eight, and so on. As in decimal, the least significant digit is on the right and the most significant on the left. Watch the row of eight lamps, where a lit lamp is a one. Binary one zero one lights the four and the one, which makes five. Now one one one zero one one: thirty-two, sixteen, eight, two and one, which makes fifty-nine.
Part 2 · Numbers
Binary column values To convert binary to decimal, write the number under the table and add the values of the columns that hold a 1. Zeros are not counted.
Binary digit 10th 9th 8th 7th 6th 5th 4th 3rd 2nd 1st Power of 2 29 28 27 26 25 24 23 22 21 20 Decimal value 512 256 128 64 32 16 8 4 2 1 Example: 101 1 0 1 = 4 + 1 4 – 1 Example: 111011 1 1 1 0 1 1 = 59 32 16 8 – 2 1
Ten bits can count up to 1023 (512 + 256 + … + 1). Eight bits up to 255.
Chapter 16 · Basic Computers
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the column values of the first ten binary digits. Reading from the right, the first digit is two to the power zero, which is one; then two, four, eight, sixteen, thirty-two, sixty-four, one hundred and twenty-eight, two hundred and fifty-six and five hundred and twelve. To convert a binary number to decimal, write it under the table, lined up on the right, and add the values of the columns that contain a one. Zeros count nothing. So one zero one is four plus one, which is five. One one one zero one one is thirty-two plus sixteen plus eight plus two plus one, which is fifty-nine. Notice how quickly the columns grow: eight bits can count up to two hundred and fifty-five, and ten bits up to one thousand and twenty-three. That is why binary numbers are long, and why we will need a shorthand.
Part 2 · Numbers
Decimal to binary: keep dividing by two Divide the decimal number by 2 and write down the remainder (0 or 1) Divide the answer by 2 again; repeat until the answer is 0 The first remainder is the least significant bit (rightmost) Read the remainders from the bottom up Example: 96 = 1100000 (64 + 32) Decimal 96 to binary: keep halving number ÷ 2 = remainder 96 48 0 48 24 0 24 12 0 12 6 0 6 3 0 3 1 1 1 0 1 read upwards 96 = 1100000 in binary first remainder = least significant bit (rightmost)
Chapter 16 · Basic Computers
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
To go the other way, from decimal to binary, keep dividing by two and note the remainder each time. The remainder is always a zero or a one. Let us convert ninety-six. Ninety-six divided by two is forty-eight, remainder zero. Forty-eight divided by two is twenty-four, remainder zero. Twenty-four gives twelve, remainder zero; twelve gives six, remainder zero; six gives three, remainder zero. Three divided by two is one, remainder one. And one divided by two is zero, remainder one. Now stop, because the answer is zero. The first remainder you wrote is the least significant bit, on the right, so read the remainders from the bottom up: one one zero zero zero zero zero. Check it with the column values: sixty-four plus thirty-two is ninety-six. Always check your answer this way in the exam; it takes a few seconds.
Part 2 · Numbers
Practice conversions Check each one with the column values 64, 32, 16, 8, 4, 2, 1.
Decimal Binary Check 7 111 4 + 2 + 1 14 1110 8 + 4 + 2 18 10010 16 + 2 59 111011 32 + 16 + 8 + 2 + 1 69 1000101 64 + 4 + 1 96 1100000 64 + 32 255 11111111 128 + 64 + 32 + 16 + 8 + 4 + 2 + 1
Quick checks: every odd number ends in 1; every even number ends in 0. A number of n ones in a row equals 2ⁿ − 1 (111 = 7).
Chapter 16 · Basic Computers
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are some conversions to practise, each with its check. Seven is four plus two plus one, so it is one one one. Fourteen is eight plus four plus two, so it is one one one zero; notice that doubling a number just adds a zero on the right, exactly as multiplying by ten does in decimal. Eighteen is sixteen plus two: one zero zero one zero. Fifty-nine we have seen. Sixty-nine is sixty-four plus four plus one: one zero zero zero one zero one. Ninety-six is one one zero zero zero zero zero. And two hundred and fifty-five is eight ones, the largest number one byte can hold. Two quick checks will catch most slips. Every odd number ends in a one and every even number in a zero. And a row of n ones equals two to the n, minus one, so one one one is eight minus one, seven.
Part 2 · Numbers
Bits, bytes and words Binary digits are handled in groups. Memory capacity is measured in bytes : kilobytes, megabytes, gigabytes.
Bit One binary digit : the smallest unit of information. Always a high or a low level, 1 or 0.
Byte Bits handled as a group; normally 8 bits . Can hold 256 values, 0 to 255.
Word The group of bits a computer uses as its standard format , e.g. 16 or 32 bits , decoded by a set format.
Capacity Memory and disks are rated in bytes : kB, MB, GB (thousands, millions, thousands of millions).
Chapter 16 · Basic Computers
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Engineers use a few words for groups of binary digits. A bit is one binary digit, and it is the smallest element of information in a digital system. A bit is always either a high or a low logic level, a one or a zero. Bits handled together as a group are called a byte, and in practice a byte is eight bits, so it can hold two hundred and fifty-six different values, from zero to two hundred and fifty-five. A word is the group of bits that a particular computer uses as its standard information format. Many aircraft systems communicate using sixteen or thirty-two bit words, and each word follows a set format so the receiving computer can decode its message. Finally, the capacity of memory and disks is expressed in bytes: kilobytes, megabytes and gigabytes, roughly thousands, millions and thousands of millions of bytes.
Part 2 · Numbers
Octal: base 8 in groups of three bits Octal is base 8: digits 0 to 7 ; columns are powers of 8 (1, 8, 64, 512)Three bits (a triad ) hold 0 to 7, exactly one octal digit So split a binary number into groups of three from the right Example: 001 010 100 001 = octal 1241 = 673 Used to handle long binary data and for data transmission between aircraft computers Octal: base 8, bits in groups of three 001 ↓ 1 × 8³ (× 512) 512 010 ↓ 2 × 8² (× 64) 128 100 ↓ 4 × 8¹ (× 8) 32 001 ↓ 1 × 8⁰ (× 1) 1 512 + 128 + 32 + 1 = 673 binary 001 010 100 001 = octal 1241 = decimal 673 three bits hold 0 to 7 (111 = 7): one octal digit used for data transmission between aircraft computers
Chapter 16 · Basic Computers
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Long binary numbers are hard to read, so engineers use shorthand. The first is octal, which is base eight, using the digits zero to seven. Its columns are powers of eight: one, eight, sixty-four, five hundred and twelve. The neat trick is that three bits, called a triad, can hold any value from zero to seven, since one one one is seven. So one octal digit corresponds exactly to three bits. To convert, split the binary number into groups of three, starting from the right. Our example, zero zero one, zero one zero, one zero zero, zero zero one, gives the octal digits one, two, four, one. Now multiply by the column values: one times five hundred and twelve, two times sixty-four, four times eight and one times one. That is five hundred and twelve plus one hundred and twenty-eight plus thirty-two plus one, which is six hundred and seventy-three. Octal is often used for data transmission between aircraft computers.
Part 2 · Numbers
Hexadecimal: base 16 Hexadecimal (hex) is base 16: digits 0–9 then A–F (A = 10 … F = 15)Four bits hold 0 to 15: exactly one hex digit So a 16-bit word is just 4 hex digits Main use: labelling the very large numbers of memory locations Example: 1010 1111 0011 1000 = AF38 hex Hexadecimal: base 16, four bits per digit 0 = 0 = 0000 1 = 1 = 0001 2 = 2 = 0010 3 = 3 = 0011 4 = 4 = 0100 5 = 5 = 0101 6 = 6 = 0110 7 = 7 = 0111 8 = 8 = 1000 9 = 9 = 1001 A = 10 = 1010 B = 11 = 1011 C = 12 = 1100 D = 13 = 1101 E = 14 = 1110 F = 15 = 1111 16-bit example 1010 ↓ A 1111 ↓ F 0011 ↓ 3 1000 ↓ 8 16 bits = 4 hex digits: AF38 hex = 44856 decimal
Chapter 16 · Basic Computers
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The second shorthand is hexadecimal, or hex, which is base sixteen. It needs sixteen symbols, so after the digits zero to nine it uses the letters A to F, where A is ten, B eleven, and so on up to F, which is fifteen. The important point is that four binary digits can hold any value from zero to fifteen, so one hex digit stands for exactly four bits. A sixteen-bit word can therefore be written as just four hex digits. Look at the example: split the word into groups of four from the right. One zero one zero is ten, which is A. One one one one is fifteen, F. Zero zero one one is three, and one zero zero zero is eight. So the word is A F three eight in hex. The main purpose of hex is to represent the very large numbers of memory locations in microprocessors.
Part 2 · Numbers
Positive and negative logic levels Binary 1 is usually a positive voltage (+5 V or +28 V ), binary 0 is 0 V (earth) : positive logic Strictly: in positive logic 1 is the more positive of the two levels Both levels may be positive, both negative, or one each (bipolar ) Negative logic : binary 1 is the lower level, 0 the higher; less commonExam: "1 = +5 V, 0 = earth" is positive logic -5 V 0 V +5 V +10 V +15 V 1 0 1 0 1 0 1 0 1 0 1 0 POSITIVE logic: 1 is the higher level NEGATIVE logic: 1 is the lower level 1 = 0 V, 0 = −5 V is still positive
Chapter 16 · Basic Computers
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
In a digital circuit, binary one is usually represented by a positive voltage, such as five volts or twenty-eight volts, and binary zero by zero volts, the earth. This is called positive logic, and it is by far the most common. Strictly, positive logic only requires that the one is the more positive of the two levels. The drawing shows four positive logic pairs: seven point five and zero volts, ten and five volts, plus two point five and minus two point five volts, called bipolar, and even zero and minus five volts. In every case, the one is above the zero. Negative logic is the reverse: binary one is the lower voltage and binary zero the higher. The two examples on the right are one at five volts with zero at ten volts, and one at zero volts with zero at fifteen volts. Negative logic is less common, but you must be able to recognise it.
Part 3 · Hardware
The parts of a basic digital computer INPUT keyboard, mouse, modem aircraft sensors CPU ALU registers control unit + clock OUTPUT screen, printer EFIS, MCDU MEMORY Data flow: input → processing (with memory) → output Every computer, from a laptop to a flight management computer, has these four parts: input, CPU, memory and output.
Chapter 16 · Basic Computers
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Every digital computer, however large or small, has the same basic parts. Binary is the language in which its calculations are carried out and its information is stored. On the left are the input devices, which feed data in; on an aircraft these are sensors such as the radio altimeter, barometric altitude, true airspeed and fuel flow. In the middle is the central processing unit, the CPU, which does the work. Above it is the memory, which holds the program of instructions and the data being worked on; data flows both ways between the CPU and memory. On the right are the output devices, such as the EFIS symbol generator or the control display unit of the flight management system. Watch the data flow from input, through processing with memory, to output. If an exam question lists components, the answer is input, CPU, memory and output, nothing more.
Part 3 · Hardware
Inside the central processing unit The CPU performs, organises and controls every operation: the "brain" What it can do is set by its instruction set Arithmetic logic unit (ALU) : arithmetic and logic in binary Shift registers : temporary stores; the accumulator holds the data being processedControl unit : contains the clock , a crystal-controlled oscillatorALU CONTROL UNIT ACC R1 R2 R3 shift registers clock ALU: binary arithmetic and logic · Registers: temporary stores Control unit: timing from a crystal-controlled clock
Chapter 16 · Basic Computers
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
The central processing unit performs, organises and controls all the operations the computer can carry out. It really is the brain of the computer, and what it can do is defined by its instruction set. The CPU has three parts. The arithmetic logic unit, or A-L-U, performs the calculations and logical operations, always in the binary number system. The shift registers are temporary stores. One of them, called the accumulator, holds the data actually being processed at that moment. Watch the data pass between the registers and the A-L-U. The control unit decodes each instruction and organises the steps, and it contains the computer's clock. The clock is a crystal-controlled oscillator that produces timing pulses at a fixed frequency to keep every operation in step. Remember: input and output devices and the hard disk are not part of the CPU.
Part 3 · Hardware
The clock and the instruction cycle The clock gives timing pulses at a fixed frequency to synchronise all operations Each instruction follows a cycle: fetch, decode, execute Higher clock frequency = more instructions per second Period = 1 ÷ frequency: 100 MHz → 10 ns Crystal control keeps the frequency very stable Clock pulses set the pace one period FETCH instruction from memory DECODE control unit works out what to do EXECUTE ALU does it; result to a register period = 1 ÷ frequency: 100 MHz → 10 ns per pulse
Chapter 16 · Basic Computers
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
The clock is the heartbeat of the computer. It produces a steady stream of timing pulses at a fixed frequency, and every operation happens in step with them, so the parts of the computer stay synchronised. Each instruction in the program passes through a cycle. First it is fetched from memory. Then the control unit decodes it, working out what it means. Then it is executed, usually by the A-L-U, with the result going into a register or back to memory. The faster the clock, the more instructions per second. The time for one pulse, the period, is one divided by the frequency, so a one hundred megahertz clock has a period of ten nanoseconds, ten thousand millionths of a second. The oscillator is controlled by a quartz crystal, which keeps the frequency very stable, just as in a quartz watch.
Part 3 · Hardware
Input and output devices Input peripherals feed data in: keyboard, mouse, modemOn the aircraft: sensors such as radio altimeter, baro altitude, TAS, fuel flow Output peripherals : screen display unit, printerOn the aircraft: the EFIS symbol generator , the FMS control display unit The BIOS (basic input output system) translates signals into and out of the computer CPU INPUTS OUTPUTS Radio altimeter Barometric altitude True airspeed Fuel flow EFIS symbol generator FMS control display unit Warnings and aural alerts Autopilot servos BIOS translates inputs and outputs
Chapter 16 · Basic Computers
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
The CPU accepts digital signals from input devices through its input port. On a personal computer the input peripherals are the keyboard, the mouse and the modem. On an aircraft they are mainly sensors: the radio altimeter, barometric altitude, true airspeed, fuel flow and many more. After processing, the results go out through the output port to the output peripherals. On a personal computer that is the screen display unit and the printer. On an aircraft it may be the EFIS symbol generator, which draws the displays, the control display unit of the flight management system, warning systems, or servos. Between the two sits the basic input output system, the BIOS. It converts input signals into a form the computer can work with, and converts the outputs into a form the operator or another aircraft system can understand. In the exam, a keyboard is an input, and a screen is an output.
Part 3 · Hardware
Types of memory Volatile memory loses its data when power is removed; non-volatile memory keeps it.
Memory Full name Written by Volatile? ROM Read only memory The manufacturer; then read only No PROM Programmable ROM The user, once No EPROM Erasable programmable ROM The user; erased by ultraviolet light No EEPROM Electrically erasable PROM The user; erased electrically No EAROM Electrically alterable ROM Updated in service (e.g. FMS database) No RAM Random access memory Written, read and altered at will Yes (normally)
RAM holds the program being run and the data being processed. Work in RAM is lost when the power goes off.
Chapter 16 · Basic Computers
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
A computer needs a working memory to run its program, which is its software. If the program is fixed, as in a computer-controlled piece of equipment, the memory only has to be read, so read only memory, ROM, is used, programmed by the manufacturer. If the user wants to construct or modify the program and keep it permanently, a programmable ROM, P-ROM, an erasable P-ROM, E-PROM, or an electrically erasable P-ROM, E-E-PROM, is used instead. An electrically alterable ROM, E-A-ROM, is a special type that can be updated in service. All these keep their contents with the power off; they are non-volatile. If the program or data must change during operation, the memory must be written to as well as read. That is random access memory, RAM, which can be written, read and altered at will. RAM is normally volatile: it loses its data when power is switched off.
Part 3 · Hardware
Permanent storage and capacity RAM is volatile, so work is lost when power is removed Permanent storage: magnetic disks (hard and floppy); today mostly flash memory Hard disks are built in; floppy disks were removable and portable Capacity is measured in megabytes or gigabytes Non-volatile stores keep programs and data with no power Where a computer keeps things RAM working memory: program being run + data VOLATILE ROM family fixed programs, start-up code, settings NON-VOLATILE Disks / flash permanent store for programs and files NON-VOLATILE 1 byte 8 bits 1 kilobyte ≈ 1000 bytes 1 megabyte ≈ 1 million 1 gigabyte ≈ 1000 million
Chapter 16 · Basic Computers
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because RAM is volatile, anything held only in RAM is lost when the power is removed. Computers therefore need permanent storage for their programs and for the work they generate. Traditionally this was magnetic disks. Hard disks are usually an integral part of the hardware, while floppy disks could be inserted and removed, so they were portable and could be locked away. Both are permanent, non-volatile stores. Today most new equipment uses solid-state flash memory instead of disks, but the principle is the same. Storage capacity is measured in bytes, normally megabytes or gigabytes. For the exam, remember three pairs. RAM is volatile; ROM, disks and flash are non-volatile. The permanent memory of a digital computer is usually a disk, rated in megabytes or gigabytes. And memory capacity is always expressed in bytes, not bits.
Part 4 · On the aircraft
Analogue to digital and back again 0100 0101 1000 1010 1100 1100 1011 1001 0111 0101 0011 0011 Sampling: measure the voltage at regular instants and code each value in binary A → D analogue in, binary out D → A does the reverse: binary in, analogue out e.g. to drive an analogue indicator or a servo A to D converter between analogue sensors and the computer input; D to A converter between the computer and analogue devices.
Chapter 16 · Basic Computers
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Many aircraft sensors produce analogue information: voltages, pressures and temperatures that vary smoothly. A digital computer can only work with binary, so an analogue to digital converter, an A to D converter, is needed in the interface between the sensor and the computer's input. It measures, or samples, the voltage at regular instants and codes each value as a binary number. Watch the scene. The sensor reads five volts, and the converter gives the four-bit code zero one zero one. A moment later the sensor reads twelve volts, and the code becomes one one zero zero. The more bits, the finer the steps; real converters use twelve bits or more. When the computer has to pass information to an analogue device, such as an analogue indicator or a servo motor, the process is reversed by a digital to analogue converter, a D to A converter.
Part 4 · On the aircraft
The FMS database: EAROM and the 28-day cycle The FMS navigation database is held in EAROM : electrically alterable ROM It contains a worldwide database of airfields, navigation aids, airways and procedures Frequencies and routes change, so the data are updated on a 28-day cycle New data are loaded through the FMS or a data loader; old data are cancelled The crew must check the database is current before flight FMS navigation database EAROM airfields · navaids airways · procedures altered electrically New data loaded from a data loader or disk; old data replaced A new cycle every 28 days 22 Jan cycle 1 19 Feb cycle 2 19 Mar cycle 3 16 Apr cycle 4 14 May cycle 5 11 Jun cycle 6 dates are an example: 28 days apart The crew checks that the database is current before flight; an out-of-date database may hold wrong frequencies or routes.
Chapter 16 · Basic Computers
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Electrically alterable read only memory, E-A-ROM, is a special type of ROM whose contents can be changed electrically, while still keeping them with the power off. It is used for the navigation database of the flight management computer. This database holds a worldwide set of airfields, navigation aids, airways, routes and procedures. Of course, frequencies, airways and procedures change from time to time, so the database must be updated. This is done on a regular twenty-eight day cycle, the same cycle used to publish aeronautical information. The data supplier issues an update to the airline, the new data are loaded into the flight management computer, for example through the control display unit or a data loader, and the old data are cancelled. Before flight, the crew checks that the database is current, because an out-of-date database may hold wrong frequencies or routes.
Part 4 · On the aircraft
Hardware, software and firmware Hardware The physical components: CPU, memory chips, keyboard, monitor, disks , cables and circuit boards.
Software The program of instructions that the hardware runs, together with the data it works on.
Firmware Software held permanently in ROM-type memory , such as start-up code and the BIOS.
Chapter 16 · Basic Computers
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three words describe what a computer is made of. Hardware is the physical equipment: the CPU, the memory chips, the keyboard, the monitor, disks, cables and circuit boards. If you can touch it, it is hardware. Software is the program of instructions that the hardware carries out, together with the data it works on. It is not the memory or the disks, which only hold the software; it is the instructions themselves. Between the two is firmware: software that is held permanently in ROM-type memory, such as the start-up code and the basic input output system, so that it is there the moment power is applied. In the exam, software means the program of instructions, and hardware means the computer components, such as the keyboard, monitor and CPU. Avoid the trap options that call RAM, ROM or disk capacity software.
Part 4 · On the aircraft
Computer-controlled aircraft systems FMS (flight management), DFGS (digital flight guidance)GPWS (ground proximity) and TCAS (traffic collision avoidance)Fly-by-wire : computers control the whole flight envelope, with crew inputsCurrent design: a dedicated computer for each system Future: an integrated hazard warning system that prioritises all warnings
Today: dedicated computers
FMS DFGS GPWS TCAS Fly-by-wire Weather radar
Possible future: integrated hazard warning
Stall Windshear GPWS TCAS Wx radar
Central processor with back-up
One prioritised warning
Chapter 16 · Basic Computers
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Many aircraft systems are computer controlled. They include the flight management system, the digital flight guidance system, the ground proximity warning system and the traffic alert and collision avoidance system. Fly-by-wire aircraft take this much further: the whole flight envelope is controlled by computers, with inputs from the crew when necessary. Current design favours a dedicated computer for each separate system, as in the top half of the drawing. In the future we may see the computing power shared, in the form of an integrated hazard warning system. A powerful central processor, with suitable back-up, would take the inputs from the stall warning system, windshear detection, the ground proximity system, the collision avoidance system and even the weather radar, process them together, and prioritise the warnings given to the crew, so that the most urgent threat is always presented first.
Exam traps
Common traps with computers Four parts only A basic computer: input, CPU, memory, output. Not an inertial unit or brightness control.
CPU contents ALU, shift registers and control unit. Input/output devices and disks are not in the CPU.
Input or output Keyboard, mouse, modem: input. Screen, printer: output. Disks are storage.
Volatile Volatile loses data at power-off (RAM). Non-volatile keeps it (ROM family, disks).
Bit and byte Bit: smallest element. Byte: a group of bits (8). Capacity in bytes.
Bases Binary 2, octal 8, decimal 10, hexadecimal 16 (0–9, A–F). Calculations in binary.
Chapter 16 · Basic Computers
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the traps that catch students most often. First, a basic digital computer has four parts: input peripherals, the central processing unit, memory and output peripherals. Distractors such as an inertial unit or an auto brightness control are not part of it. Second, the CPU consists of the arithmetic logic unit, the shift registers and the control unit; input and output devices and the hard disk are outside it. Third, a keyboard, a mouse and a modem are input devices, while a screen and a printer are output devices. Fourth, volatile memory loses its data when power is removed, and non-volatile memory keeps it. Fifth, the bit is the smallest element of information, a byte is a group of bits, and memory capacity is in bytes. Sixth, octal is base eight and hexadecimal base sixteen, but the computer itself always calculates in binary.
Summary
What to take into the exam Computers Store data and a program. Analogue: continuous variables. Digital: binary, two states.
Binary Columns 1, 2, 4, 8 …; add the 1s. Decimal → binary: divide by 2, read remainders upwards.
Octal and hex Octal base 8, 3 bits per digit. Hex base 16 (0–F), 4 bits per digit; 16 bits = 4 hex digits.
Logic levels Positive: 1 = higher (e.g. +5 V, 0 = earth). Negative: 1 = lower.
Hardware Input, CPU (ALU, registers/accumulator, control unit + clock), memory, output.
Memory RAM volatile; ROM, PROM, EPROM, EEPROM, EAROM non-volatile. Disks permanent.
Conversion A to D between analogue sensors and the computer; D to A to analogue devices.
Aircraft FMS (EAROM database, 28-day update), DFGS, GPWS, TCAS, fly-by-wire.
Chapter 16 · Basic Computers
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us sum up. A computer stores data and a program that operates on it. Analogue computers use continuous variables, while digital computers use binary, two states only. To read binary, add the column values one, two, four, eight and so on wherever there is a one; to convert decimal to binary, keep dividing by two and read the remainders upwards. Octal is base eight, three bits per digit, and hexadecimal is base sixteen, four bits per digit. In positive logic the one is the higher voltage; in negative logic the lower. The hardware is input, CPU, memory and output, and the CPU holds the A-L-U, the shift registers with the accumulator, and the control unit with its clock. RAM is volatile; the ROM family and disks are not. A to D converters bring analogue sensor data in, and D to A converters send data out. And the FMS database, in E-A-ROM, is updated every twenty-eight days.