Engines · Chapter 10
Fuel Injection Low-pressure, continuous-flow indirect injection: pumps, the fuel/air control unit, the manifold valve and matched nozzles, the fuel flow gauge, starting and stopping, and the diesel common rail.
continuous spray into the inlet port
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter ten is about fuel injection, the alternative to the carburettor on many light aircraft engines. Instead of letting a venturi suck fuel out of a float chamber, an injection system pumps fuel under pressure, meters it in proportion to the airflow, and sprays it continuously into each cylinder's inlet port through its own nozzle. We will follow the fuel from the pumps through the fuel/air control unit and the manifold valve to the nozzles, see how the fuel flow gauge really works, how you start and stop an injected engine, and finish with the very high-pressure common-rail system of the aero-diesel.
Chapter 10 · Roadmap
Fuel injection, from pump to port 1 · Why and how Advantages over the carburettor; direct and indirect; continuous flow into the port.
2 · The components Pumps, fuel/air control unit, mixture valve, manifold valve, nozzles, flow gauge.
3 · Operation Priming and starting, idle cut-off, icing and alternate air.
4 · Diesels High-pressure common rail, FADEC-timed injectors.
Chapter 10 · Fuel Injection
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the plan. First, why aircraft engines use injection at all, the difference between direct and indirect injection, and why the light aircraft system sprays fuel continuously into the inlet ports. Second, the components, following the fuel: the engine-driven and electric pumps, the fuel/air control unit with its throttle, metering valve and mixture valve, the fuel manifold valve, the matched discharge nozzles, and the fuel flow gauge, which is not quite what it seems. Third, operation: how to prime and start an engine that has no priming pump, how to stop it with the idle cut-off, and how it is protected from icing. Finally, the very high-pressure common-rail injection of the aero-diesel.
Part 1 · Why and how
Why inject the fuel? No venturi and no fuel evaporating in it: freedom from refrigeration icing Good distribution : each cylinder has its own nozzle, so mixtures are more evenUnaffected by manoeuvres : no float chamberBetter economy : even mixtures allow leaner runningLow operating pressure, and a pump that need not be timed to the cycle
Float carburettor
Fuel injection
Venturi icing
prone
none (no venturi)
Distribution
uneven between cylinders
even: one nozzle each
Manoeuvres, negative g
float upset
unaffected
Acceleration
needs accelerator pump
responds at once
Economy
fair
better (leaner, even mixture)
Hot starting
easy
can be difficult (vapour)
Chapter 10 · Fuel Injection
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why go to the trouble of injecting fuel? Compare it with the float carburettor. Because there is no venturi with fuel evaporating in it, an injection system is free from refrigeration icing. Each cylinder has its own nozzle, so the fuel is shared out evenly, instead of depending on how the mixture flows round the bends of a manifold; more even mixtures mean every cylinder can be leaned further, so economy improves. There is no float chamber, so manoeuvres and negative g do not upset the fuel supply, and there is no lag to cover with an accelerator pump. The light aircraft system works at low pressure, and since it sprays continuously, its pump does not need to be timed to the engine cycle. The main drawback is in starting a hot engine, when fuel can turn to vapour in the hot lines, as we will see later.
Part 1 · Why and how
Direct and indirect injection Direct : fuel injected into the combustion chamber , at very high pressure, timed to each cycleUsed in diesels (and some older piston aero engines) Indirect : fuel injected into the induction , outside the cylinderLight aircraft petrol engines: indirect, low-pressure, continuous-flow The nozzle sprays as close to the inlet valve as possible
INDIRECT
into the inlet port
low pressure, continuous
not timed
light aircraft petrol engines
DIRECT
into the cylinder
very high pressure
timed to each cycle
diesels (common rail)
Chapter 10 · Fuel Injection
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are two basic ways to inject fuel. Direct injection sprays it straight into the combustion chamber. Because the chamber pressure is high during compression, the injection pressure must be very high, and each squirt must be timed precisely to the engine cycle. That is how diesels work, and some older high-powered aero engines too. Indirect injection sprays the fuel into the induction system, outside the cylinder, where the pressure is low. The system used on light aircraft petrol engines is indirect, low-pressure and continuous-flow: each nozzle sprays continuously into the inlet port, as close to the inlet valve as possible. So in an exam, if you are asked where the fuel goes, the answer is continuously into the inlet ports, not into the cylinders, and not only when the inlet valve opens.
Part 1 · Why and how
Continuous flow into the inlet port Each nozzle sprays a steady stream into its inlet port, whatever the valve is doing With the inlet valve shut , the fuel collects on the hot back of the valve and vaporises When the valve opens , the charge sweeps it into the cylinder No timing gear: the amount injected is set by pressure , not by timing The intake has a throttle valve but no venturi
One cycle: 720° of crank rotation
Nozzle
spraying all the time
Inlet valve
open
shut: fuel waits on the hot valve
TDC
BDC
TDC
BDC
TDC
• inlet valve open ≈ 255° of 720° (about 35%)
• quantity set by PRESSURE, not by timing
• no timing gear, no high pressure needed
Chapter 10 · Fuel Injection
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Continuous flow sounds wasteful, so let us see why it works. Each nozzle sprays a steady stream of fuel into its inlet port all the time, whatever the valves are doing. For three quarters of the cycle the inlet valve is shut, and the fuel collects on the back of the valve head, which is very hot, so it vaporises there. When the valve opens on the induction stroke, the incoming air sweeps the vapour into the cylinder. In the scene, watch the port on the left: that is where the fuel is sprayed, and the charge enters each time the inlet valve opens. Because the spray is continuous, there is no timing mechanism at all; the quantity of fuel is set purely by the pressure at the nozzles. And because nothing needs to be sucked out of a venturi, the intake has a throttle valve but no venturi.
Part 2 · The components
The indirect injection system
tank
electric
boost
engine
pump
bypass (check valve)
fuel/air control unit
air throttle
metering valve
mixture valve
return to pump inlet
FMV
fuel manifold valve
flow gauge
cyl 1
cyl 2
cyl 3
cyl 4
discharge nozzle in each head
Chapter 10 · Fuel Injection
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the whole system, following the fuel. From the tank, fuel passes the electric boost pump and reaches the engine-driven pump, which supplies more than the engine needs; the excess is recirculated. The pressurised fuel goes to the fuel/air control unit, mounted on the intake. It contains the air throttle, a metering valve linked to the throttle, and the mixture valve worked by the mixture lever, which bleeds fuel back to the pump inlet. Metered fuel then goes up to the fuel manifold valve on top of the crankcase, the distribution point, with the fuel flow gauge connected to it. From there, separate lines run to a discharge nozzle in each cylinder head. Four main components, then: the fuel pump, the fuel/air control unit, the fuel manifold valve and the discharge nozzles, plus the throttle valve and a pressure gauge for setting the mixture.
Part 2 · The components
The fuel pumps The engine-driven pump supplies more fuel than the engine needs ; the excess is recirculated Its output pressure rises with engine speed An electric pump in parallel: a bypass lets it feed past a stationary engine pump Electric pump uses: priming , starting and emergency (engine pump failure) Return paths also carry away vapour , helping hot running
electric
boost pump
engine-driven vane pump
bypass check valve
relief valve: excess back to inlet
to FCU
• Engine pump: MORE fuel than needed, pressure rises with RPM
• Boost pump: priming, starting, emergency (engine pump failure)
• Many systems also return vapour to the tank
Chapter 10 · Fuel Injection
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
The engine-driven pump, typically a vane pump, is sized to supply more fuel than the engine could ever need, so that the metering system always has fuel to work with. The surplus is recirculated: a relief valve returns it to the pump inlet, and on many systems a return line also carries any vapour back to the tank. Because the pump is driven by the engine, its delivery pressure rises with engine speed, and the metering system uses that. The electric pump is arranged in parallel. When the engine is not turning, the engine-driven pump is stationary, so a bypass with a check valve lets fuel from the electric pump flow past it under positive pressure. That is how the electric pump provides fuel for priming and starting, and it is the standby if the engine-driven pump fails. Note the exam point: the engine-driven pump supplies more than is required, and the excess is recycled, not used for priming.
Part 2 · The components
The fuel/air control unit Mounted on the intake manifold ; three elements Air throttle valve : worked by the throttle lever, controls the airflow ; the intake has no venturi Metering fuel valve : linked to the throttle, so fuel flow is proportioned to airflow Mixture control valve : linked to the mixture lever; bleeds off pressure to trim the mixtureFuel is metered by the positions of both the throttle and the mixture lever
to manifold
no venturi
smooth bore
metering
fuel valve
linked to the THROTTLE
mixture
control valve
linked to the MIXTURE lever
bleed back to pump inlet
metered fuel → FMV
from pump
Chapter 10 · Fuel Injection
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The fuel/air control unit sits on the intake manifold and contains three control elements. The air throttle valve is a plain butterfly in a smooth bore, connected to the throttle lever, and it controls the airflow. There is no venturi or any other restriction in the intake. Attached to the throttle body is the fuel control, with two valves. The metering fuel valve is mechanically linked to the air throttle, so as you open the throttle it opens too, and fuel flow to the manifold valve is proportioned to airflow; that gives the basic air to fuel ratio. The second valve is the mixture control valve, connected to the pilot's mixture lever. It bleeds off some of the fuel pressure applied to the metering valve, returning it to the pump inlet, so the pilot can vary the ratio from the basic setting. So the fuel delivered depends on the positions of both levers.
Part 2 · The components
How pressure meters the fuel
0
10
20
30
40
0
20
40
60
80
Metered fuel pressure, psi
Fuel flow, litres per hour (4 nozzles)
5 psi: 28 l/h
10 psi: 39 l/h
20 psi: 56 l/h
Q = Cd·A·√(2Δp/ρ)
0%
25%
50%
75%
100%
0.0
0.5
1.0
Airflow (throttle opening)
Fuel flow (relative)
full rich
best power
leaned
mixture valve sets the slope
Flow through a fixed orifice grows with the square root of the pressure difference: double the flow needs four times the pressure .
Chapter 10 · Fuel Injection
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Injection meters fuel by pressure, so it is worth understanding the law. Flow through a fixed orifice is proportional to the square root of the pressure difference across it. On the left is a computed example for four nozzles of nought point six millimetre bore: at five p s i about 28 litres an hour, at twenty p s i about 56, twice as much, for four times the pressure. Doubling the pressure gives only about one point four times the flow. That square-root law is why a fuel flow gauge that measures pressure can be calibrated in flow. On the right is the result the control unit aims for. With the metering valve linked to the throttle, fuel flow is proportional to airflow, a straight line through the origin, so the mixture stays constant as the throttle opens. The mixture valve changes the slope of that line: full rich, best power, or leaned.
Part 2 · The components
The mixture control is still necessary The basic metering does not correct for air density: a manual mixture control is necessary It adjusts fuel pressure for altitude and operating condition Set using the fuel flow / pressure gauge (calibrated for altitude and power) or the EGT Full rich for take-off and climb as the manual says; lean in the cruiseFully back: idle cut-off , which stops the engine
FULL RICH
take-off, climb as the manual says
LEANED
cruise: set by fuel flow or EGT
IDLE CUT-OFF
stops the engine
not automatic: thinner air still means a richer mixture
Chapter 10 · Fuel Injection
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
A common misconception is that fuel injection looks after the mixture automatically. In this system it does not. The metering valve follows the throttle position, but it knows nothing about air density, so as you climb into thinner air the mixture still becomes rich, just as with a carburettor. A manual mixture control is therefore necessary. It adjusts the metered fuel pressure for altitude and operating conditions. The fuel pressure gauge, which shows metered fuel pressure and is often calibrated in fuel flow with marks for altitude and power settings, lets the pilot set the mixture accurately, and many aircraft also have an exhaust gas temperature gauge for fine leaning. Use full rich for take-off and climb as the manual requires, lean in the cruise, and pull the lever fully back to idle cut-off to stop the engine.
Part 2 · The components
The fuel manifold valve On top of the crankcase : the central distribution point for metered fuel Engine stopped: a spring holds all outlet ports closed , so no fuel reaches the engine As pressure builds (engine turning or boost pump on), all ports open simultaneously A ball or diaphragm valve ensures the ports are fully open before fuel flows Fuel flows continuously and equally to every nozzle, not in firing order
Engine stopped
metered fuel in
all ports CLOSED
clean cut-off, no dribble
Running
metered fuel in
all ports OPEN together
continuous, equal to each nozzle
Chapter 10 · Fuel Injection
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Metered fuel goes next to the fuel manifold valve, sometimes called the flow divider or spider, mounted on top of the crankcase. It is the central point from which the fuel is shared out to the cylinders. Inside, metered fuel pressure acts on a diaphragm against a spring, and the diaphragm carries a plunger that covers the outlet ports. When the engine is stopped, the spring holds every port closed, so no fuel can dribble into the engine. As fuel pressure builds, either because the engine is turning or because the boost pump is on, the plunger lifts and all the ports to the discharge nozzles open simultaneously. A ball valve ensures the ports are fully open before fuel starts to flow, so every nozzle gets an equal share. Remember: the manifold valve distributes fuel continuously to all the cylinders. It does not meter the fuel, and it does not deliver it in firing order.
Part 2 · The components
The discharge nozzles One nozzle in each cylinder head , its outlet aimed into the inlet port Nozzles are calibrated in several ranges Fitted as a matched set : every nozzle on an engine has the same calibration An air bleed shroud, vented to atmosphere, helps atomise the fuel and stops siphoning at idle The tiny orifices need clean fuel : a partly blocked nozzle runs its cylinder weak
air bleed holes atomise; no siphoning
discharge nozzle in the cylinder head
aimed into the inlet port
calibrated in ranges · fitted as a MATCHED SET to each engine
Chapter 10 · Fuel Injection
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The last link is the discharge nozzle. There is one in each cylinder head, with its outlet directed into the inlet port. Nozzles are made to a set of calibrated flow ranges, and they are fitted to an individual engine as a matched set, every nozzle having the same calibration, so that each cylinder receives the same fuel for the same pressure. In other words, they are matched to the engine they are fitted to and to the nozzles on the other cylinders. Most nozzles also have an air bleed: a shroud with small holes, vented to the atmosphere or to the air above the throttle. Air drawn in through the bleed helps to atomise the fuel, and at idle, when manifold pressure is very low, it stops the manifold vacuum siphoning extra fuel through the nozzle. Because the orifices are tiny, clean fuel matters. A partly blocked nozzle starves its cylinder, which then runs weak and hot.
Part 2 · The components
The fuel flow gauge: really a pressure gauge On many systems the gauge senses metered fuel pressure at the manifold valve Pressure and flow are related, so it is calibrated in flow (gph, kg/h) A blocked nozzle raises the pressure: the gauge reads high while actual flow is lower A broken line lowers the pressure: the gauge reads low while fuel is being lost Cross-check with EGT , CHT and fuel used
FUEL FLOW
Normal
gauge 10 gph · actual 10.0 gph
gauge = actual
FUEL FLOW
Nozzle blocked
gauge 12 gph · actual 7.5 gph
gauge reads HIGH, flow is LOW
FUEL FLOW
Line broken
gauge 6 gph · actual 14.0 gph
gauge reads LOW, fuel lost
the "flow" gauge is a pressure gauge calibrated in flow
Chapter 10 · Fuel Injection
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
The fuel flow gauge on many injected engines is a trap for the unwary, because it does not measure flow at all. It measures the metered fuel pressure at the manifold valve, and since flow through the nozzles follows that pressure, the dial is simply calibrated in gallons or kilograms per hour. That works well while the nozzles are clean. Now suppose a nozzle becomes partly blocked. Less fuel can escape, so the pressure in the system rises, and the gauge shows a higher flow, while the actual flow has fallen and one cylinder is running weak. The opposite happens with a broken line downstream: the pressure falls, so the gauge reads low, while fuel is pouring out of the break. So always cross-check the fuel flow with the exhaust gas temperature, the cylinder head temperatures and the fuel actually used.
Part 3 · Operation
Priming and starting No separate priming system is needed, and no special idling systemPrime with the electric boost pump , which delivers fuel through the normal nozzles Typical: mixture rich, boost pump on for a few seconds, then start as the checklist says Too much priming floods the engine; too little and it will not fire Hot starts can be hard: fuel vaporises in hot lines; follow the hot-start drill
No separate priming system
1
Mixture RICH, throttle slightly open
2
Boost pump ON briefly: fuel to the nozzles (prime)
3
Boost pump OFF (or as the manual says)
4
Start
engine pump takes over
!
Hot engine: vapour in the lines can make it hard to start
follow the hot-start drill
Chapter 10 · Fuel Injection
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because of the way the injector system works, no special idling arrangements are needed, and no separate priming system either. To prime the engine you simply use the electric boost pump: with the mixture rich and the throttle slightly open, a few seconds of boost pump pressure opens the manifold valve and delivers fuel through the normal discharge nozzles into the inlet ports. Then you start, following the checklist, and the engine-driven pump takes over. Do not over-prime, or the engine will flood; too little, and it will not fire. Hot starting is the classic difficulty of injected engines. After a flight, heat soaks into the fuel lines on top of the engine and the fuel there turns to vapour, so the nozzles deliver vapour rather than liquid fuel. The flight manual gives a hot-start procedure, often using the boost pump with the mixture at cut-off to flush the vapour back to the tank.
Part 3 · Operation
Idle and stopping the engine Idle needs no special system : the metering valve simply passes less fuel Stop by moving the mixture to idle cut-off Metered pressure collapses; the manifold valve spring closes all ports at once A clean stop: no fuel dribbling into the cylinders, no running on Then switch off the magnetos
Mixture lever to IDLE CUT-OFF
Mixture valve stops metered fuel
Metered pressure collapses
FMV spring closes ALL ports at once
Engine stops cleanly: no dribble, no run-on
Chapter 10 · Fuel Injection
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
At idle the throttle is nearly closed, the metering valve passes a small flow, and the nozzles keep spraying continuously; there is no separate idle jet and no transition to cause a flat spot. Stopping the engine is just as tidy. You move the mixture lever fully back to idle cut-off. The mixture valve stops the metered fuel, the metered pressure collapses, and the spring in the fuel manifold valve snaps all the outlet ports shut at the same moment. Fuel stops reaching every cylinder at once, so the engine stops cleanly, with no fuel dribbling into the cylinders to wash the oil off the walls, and no running on. Only then do you switch off the magnetos, exactly as with a carburettor engine.
Part 3 · Operation
Icing and the alternate air system No venturi : an injected engine will not suffer refrigeration icing But impact ice can block the air filter or impact tubes, and fuel ice can form at bends An alternate air door admits warm, unfiltered air from inside the cowling It may open automatically by suction when the filter blocks, or be manual Follow the aircraft checklist icing drill impact ice blocks filter alternate air door warm, unfiltered automatic or manual no venturi: no refrigeration icing
Chapter 10 · Fuel Injection
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because there is no venturi with fuel evaporating in it, a fuel-injected engine will not suffer from refrigeration icing, and that is a favourite exam answer. It can still lose power to ice, though. Flying in cloud at low temperatures, impact ice can build on the air filter or on any impact sensing tubes, and fuel icing can gather at the bends in the system. So injected engines have an alternate air system rather than carburettor heat. It is a door that admits warm, unfiltered air from inside the engine cowling, bypassing the filter. On some aircraft it opens automatically, sucked open by the engine when the filter becomes blocked; on others it is a manual control. When icing is suspected, select alternate air and follow the icing drill in the aircraft checklist.
Part 3 · Operation
Carburettor and fuel injection compared Feature Float carburettor Indirect fuel injection Fuel metered by Venturi depression and jets Pump pressure, metering valve linked to the throttle Intake Venturi and throttle Throttle, no venturi Where fuel enters Venturi throat Inlet port of each cylinder, continuouslyPriming Primer pump to the manifold Electric boost pump through the nozzlesIdle and acceleration Idle jet; accelerator pump No special devices needed Mixture control Needle or air bleed Necessary : mixture valve bleeds pressureIcing Refrigeration, impact, fuel No refrigeration icing; impact and fuel ice Weak points Icing, distribution, g Hot starts, blocked nozzles, flow gauge errors
Chapter 10 · Fuel Injection
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put the two systems side by side. A carburettor meters fuel by the venturi depression acting through jets; the injection system meters it by pump pressure, through a valve linked to the throttle. The carburettor intake has a venturi and a throttle; the injected intake has only a throttle. Carburettor fuel enters at the venturi throat, injected fuel continuously at each inlet port. A carburettor engine is primed by a hand primer into the manifold; an injected engine by the electric boost pump through its own nozzles. The carburettor needs an idle jet and an accelerator pump; injection needs neither. Both need a mixture control. The carburettor suffers all three kinds of induction ice, injection only impact and fuel ice. And injection's own weak points are hot starts, blocked nozzles and a fuel flow gauge that can mislead.
Other systems
Injection carburettors and direct injection Injection (pressure) carburettor Senses airflow with venturi and impact pressures and discharges fuel under pressure beyond the throttle. Meters precisely, less affected by manoeuvres and less prone to icing than a float carburettor.
Servo-type injection Some injection systems work on a similar principle to the carburettor , measuring airflow, but inject fuel under pressure into the intake. Their impact tubes can collect impact ice.
Direct injection Fuel at very high pressure straight into the cylinder, timed to each cycle. Best distribution and economy, unaffected by manoeuvres, free from icing. Used in diesels .
Chapter 10 · Fuel Injection
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Two other systems complete the picture. The injection, or pressure, carburettor looks like a carburettor from outside, but it uses the venturi and impact pressures only to measure the airflow, and then discharges fuel under pressure into the airstream beyond the throttle. It meters fuel more precisely than a float carburettor, it is less affected by manoeuvres, and it is less prone to icing. Some fuel injection systems work on a similar principle, measuring airflow with sensing tubes and injecting fuel under pressure into the intake; those impact tubes are one place where impact ice can form. Finally there is direct injection, with fuel at very high pressure sprayed straight into the cylinder, timed to each cycle. It gives the best distribution and economy, is unaffected by manoeuvres and relatively free from icing, and it is the system used by diesels.
Aero-diesels
The diesel common rail Fuel storage as usual: wing tanks , strainer, selector, then water traps, heaters and filters A high-pressure pump keeps a common rail close to the cylinders at about 1800 bar (26 000 psi) Each cylinder has an electronically opened injector A dual-channel FADEC opens each one at the right moment for the right duration The pilot has a single power lever : no mixture lever
COMMON RAIL ≈ 1800 bar (26,000 psi)
HP
high-pressure pump
FADEC (dual channel)
opens each injector: timing and duration
electronically opened nozzles · single power lever
Chapter 10 · Fuel Injection
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
The aero-diesel stores its fuel just like any light aircraft: rigid wing tanks, feeding by gravity and ram air to a common strainer and selector valve, and then through water traps, fuel heaters and filters to the engine. The way the fuel reaches the cylinders is very different. The preferred system is the common rail. A high-pressure pump keeps a rail, mounted close to the cylinders, at around eighteen hundred bar, about twenty-six thousand p s i, which is more than a hundred times the pressure in a petrol injection system. Each cylinder has an electronically operated injector. A dual-channel electronic control unit, the FADEC, or full authority digital engine control, opens each injector at exactly the right moment and for exactly the right duration according to the power demanded. The pilot simply moves a single power lever.
Exam focus
Fuel injection traps Question asks… Answer Where is the fuel injected? Continuously into the inlet ports , as close to the inlet valve as possibleEngine-driven pump output More than required; the excess is recirculated Separate priming system? Not required : prime with the electric boost pumpMixture control on an injected engine Necessary (manual)Intake contents Throttle valve, no venturi Fuel metered in proportion to Positions of the throttle and the mixture lever Fuel manifold valve Distributes fuel continuously to all cylinders ; not in firing order Nozzles matched to The engine and to each other
Chapter 10 · Fuel Injection
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the exam favourites in one place. The fuel is injected continuously into the inlet ports, as close to the inlet valve as possible; not into the cylinders, and not only on the induction stroke. The engine-driven pump supplies more than the engine needs, and the excess is recirculated. A separate priming system is not required, because the electric boost pump primes through the normal nozzles. The mixture control is necessary; it is not automatic. The intake has a throttle valve but no venturi. Fuel is metered in proportion to the positions of both the throttle and the mixture lever. The fuel manifold valve distributes fuel continuously to all the cylinders, not in firing order, and it does not meter it. And the nozzles are matched to the engine they are fitted to and to the nozzles on the other cylinders. Add one more: an injected engine will not suffer refrigeration icing.
Summary
Fuel injection in six lines Indirect, continuous Low-pressure fuel sprayed continuously into each inlet port; no timing, no venturi.
Pumps Engine pump gives more than needed, excess recirculated; electric pump in parallel for priming, starting, emergency.
Fuel/air control unit Throttle, metering valve linked to it, and the necessary manual mixture valve.
Manifold valve and nozzles All ports open together, closed when stopped; nozzles in matched sets, aimed into the ports.
Gauge and operation Flow gauge reads pressure: a blocked nozzle reads high. Prime with the boost pump; stop with idle cut-off.
Icing and diesels No refrigeration ice; alternate air for impact ice. Diesel: 1800 bar common rail, FADEC injectors.
Chapter 10 · Fuel Injection
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. Light aircraft fuel injection is indirect, low-pressure and continuous: each nozzle sprays into its inlet port all the time, with no timing and no venturi. The engine-driven pump supplies more fuel than needed and recirculates the excess, while the electric pump in parallel provides priming, starting and emergency supply. The fuel/air control unit holds the throttle, the metering valve linked to it, and the mixture valve, which is still a necessary manual control. The fuel manifold valve opens all its ports together and closes them all when the engine stops, and the nozzles are fitted as matched sets. The flow gauge really reads pressure, so a blocked nozzle shows a high flow. You prime with the boost pump and stop with the idle cut-off. There is no refrigeration icing, but alternate air protects against impact ice. And the aero-diesel uses an eighteen-hundred-bar common rail with FADEC-controlled injectors.