Engines · Chapter 27
Turbine Fuels Kerosene and wide-cut fuels, their flash and waxing points, water and microbes in the tanks, additives, boiling at altitude and the effects of specific gravity.
JET A-1
water settles to the bottom
+40 °C 0 °C −60 °C
flash point
about +38 °C
waxing point
about −50 °C
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter twenty-seven is about the fuel a gas turbine burns. Jet engines run on kerosene, and you need to know its grades and their numbers: specific gravity, flash point and waxing point. We will look at why the fuel is never dyed, how to read a cloudy sample, how water gets into the tanks and what it does, the fungus that lives in the water, and the additives that fight these problems. Then we will see what cold does to fuel, why it can boil at altitude, and how its density changes its weight and its energy.
Roadmap
What this lesson covers Gas turbines burn kerosene . Its numbers, its contaminants and its behaviour in the cold and at altitude are all exam favourites.
1 · The grades Ideal fuel, why kerosene, Jet A-1, Jet A and Jet B : specific gravity, flash point, waxing point, fire safety.
2 · Looking at fuel Natural colour , grade labels, and what a cloudy sample is telling you.
3 · Water and microbes How water gets in, icing , the fuel fungus, additives and how water is kept out.
4 · Cold, heat and density Waxing , boiling and vapour lock, booster pumps, and the effects of specific gravity .
Chapter 27 · Turbine Fuels
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is our route through turbine fuels. In part one we look at what an ideal fuel would be, why gas turbines burn kerosene, and the three grades you must know: Jet A-1, Jet A and Jet B, with their specific gravity, flash point and waxing point, and what those numbers mean for fire safety. Part two is about looking at fuel: its natural colour, the grade labels, and how to read a cloudy sample. Part three deals with water, which is always present in fuel, the icing and the microbial growth it causes, the additives that help, and the ways we keep water out. Part four covers what happens to fuel in the cold and at altitude: waxing, boiling and vapour lock, and finally specific gravity, which changes both the weight of the fuel and the power it gives.
Part 1 · The ideal fuel
What we want from an aviation fuel The same wish list applies to piston and turbine fuels. Meeting all of it would cost too much, so every real fuel is a compromise .
Flows easily in every condition, from a hot apron to a cold-soaked wing at altitude
Burns completely clean, complete combustion at every power setting
High calorific value plenty of heat energy per kilogram and per litre
Non-corrosive no attack on tanks, pipes, pumps or seals
Harmless by-products no damaging deposits on turbine or combustor
Low fire hazard little ignitable vapour at normal temperatures
Easy starting lights up readily, even in the cold
Lubricity lubricates the pumps and fuel control parts it flows through
Chapter 27 · Turbine Fuels
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us start with the wish list for an ideal aviation fuel, which is the same for piston and turbine engines. It should flow easily in every condition, from a hot apron to a wing cold-soaked at high altitude. It should burn completely at every power setting, and release plenty of heat, which we call a high calorific value. It must not corrode the tanks, pipes and seals, and what it leaves behind after burning must not damage the engine. It should be a low fire hazard, it should make the engine easy to start, and it needs lubricity, because the fuel itself lubricates the pumps and the fuel control unit it passes through. Meeting every one of these perfectly would be far too expensive, so every real fuel is a compromise between them.
Part 1 · Why kerosene
Gas turbines burn kerosene Turbine fuels are kerosene-type fuels; the main civil grade is Jet A-1 (Avtur) Combustion is continuous : no detonation, so no octane rating and no lead About the same energy per kilogram as avgas, but denser , so about 10 % more energy per litre Low volatility : little vapour, small evaporation losses at altitude and a lower fire riskKerosene is oily : it lubricates the HP pump and fuel control parts Energy in a typical kilogram and litre 0 10 20 30 40 50 megajoules 43.2 kerosene 43.5 avgas 34.6 kerosene 31.3 avgas per kilogram per litre Kerosene carries about 10 % more energy in each litre
Chapter 27 · Turbine Fuels
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Gas turbine aircraft burn kerosene-type fuel, and the main civil grade is Jet A-1, also called Avtur. Why kerosene and not petrol? In a gas turbine the fuel is sprayed into the combustor and burns continuously, so there is no detonation to worry about. That means no octane rating and no lead. Kerosene carries about the same energy per kilogram as avgas, around forty-three megajoules, but it is denser, so each litre holds about ten per cent more energy, which matters when tank space is limited. It is much less volatile, so less fuel boils off at altitude and there is less flammable vapour around it. And it is slightly oily, so it lubricates the high pressure pump and the fuel control parts it flows through. In the scene, follow the air from the compressor into the combustor, where the fuel is sprayed and burned.
Part 1 · The grades
Jet A-1, Jet A and Jet B Learn these figures exactly: they are the exam values.
0.70 0.75 0.80 0.85 0.90 0.95 1.00 avgas 0.72 Jet B 0.77 Jet A-1 0.80 water 1.00 Relative density at 15 °C: water is heavier than every fuel, so it sinks to the bottom of the tank Relative density Jet A-1 (Avtur) Kerosene , aviation turbine fuel. Relative density about 0.80 at 15 °C . Medium flash point +38.7 °C . Waxing point −50 °C . The worldwide civil fuel.
Jet A The same kerosene type but with a waxing point of −40 °C . Normally available only in the USA . Watch the fuel temperature on long, cold flights.
Jet B (Avtag) Wide-cut gasoline/kerosene mix, aviation turbine gasoline. Relative density about 0.77 . Low flash point −20 °C , wider boiling range, waxing point −60 °C .
Chapter 27 · Turbine Fuels
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are three grades to learn. Jet A-1, also called Avtur, is a kerosene with a relative density of about nought point eight at fifteen degrees Celsius. It has a medium flash point of thirty-eight point seven degrees and a waxing point of minus fifty degrees. It is the fuel you will meet almost everywhere in civil aviation. Jet A is the same kind of kerosene, but its waxing point is only minus forty degrees, and it is normally found only in the United States. Jet B, also called Avtag, is a wide-cut fuel, a blend of gasoline and kerosene. It is slightly lighter, about nought point seven seven, has a much lower flash point of minus twenty degrees and a wider boiling range, but stays liquid down to about minus sixty. Learn these figures exactly, because they are the values the exam uses.
Part 1 · The numbers on one scale
Flash points and waxing points compared −70 −60 −50 −40 −30 −20 −10 0 +10 +20 +30 +40 +50 +60 Temperature (°C) usual ground temperatures Avgas flash about −40 Jet B (Avtag) wax −60 flash −20 Jet A wax −40 flash +38 Jet A-1 (Avtur) wax −50 flash +38.7 waxing point: wax crystals start to form flash point: vapour above the fuel can be ignited
Chapter 27 · Turbine Fuels
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the same numbers on one temperature scale. The orange circles are flash points, the lowest temperature at which the fuel gives off enough vapour to be ignited by a flame. The blue diamonds are waxing points, where wax crystals begin to form in the cold. The shaded band shows normal ground temperatures, from zero to forty degrees. Notice that both kerosenes have their flash point above most of that band, so at ordinary temperatures the vapour above them is too lean to burn. Jet B and avgas have flash points far below it, so their vapour can be ignited on any normal day. At the cold end, Jet B stays liquid the longest, down to minus sixty, Jet A-1 to minus fifty, and Jet A only to minus forty. So wide-cut fuel is better in the cold, but much worse for fire safety.
Part 1 · Fire safety
Why Jet B is rarely used by airlines Flash point : lowest temperature at which the fuel gives off enough vapour to ignite with a flameJet A-1 at +20 °C is below its flash point : the vapour above it is too lean to burn Jet B at +20 °C is 40 °C above its flash point: ignitable vapour in tanks and spills Jet B can be used as an alternative to Jet A-1, but for safety it is not generally used in civil aircraft Its advantages: very low waxing point and easier cold starting Jet A-1 at +20 °C flash point +38 °C below its flash point: vapour too lean to burn Jet B at +20 °C flash point −20 °C far above its flash point: ignitable vapour in the tank Dots: fuel vapour in the space above the fuel
Chapter 27 · Turbine Fuels
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why do airlines avoid Jet B? The answer is the flash point, the lowest temperature at which the fuel gives off enough vapour to be ignited by a flame. On a twenty-degree day, Jet A-1 is below its flash point of about thirty-eight degrees, so the vapour in the space above it is too lean to burn. Jet B, with a flash point of minus twenty, is forty degrees above it, so the space above the fuel holds vapour that can catch fire, and any spill gives off a flammable cloud. That is why Jet B, although it is an approved alternative for many turbine engines, is not generally used in civil aircraft. It does have advantages: its very low waxing point and its volatility make cold starting easier, so it has been used in very cold regions and by some military operators.
Part 1 · Fire safety
Refuelling with passengers on board Allowed only with kerosene (Jet A-1) , and only with precautions in place Not permitted with wide-cut fuel (Jet B, Avtag) or with avgas Reason: their low flash points give ignitable vapour round the vents Precautions: crew at the doors, exits and escape routes clear , passengers told, no smoking Aircraft and bowser bonded to stop static sparks Refuelling with passengers on board Jet A-1 / Avtur (kerosene) permitted with precautions Jet B / Avtag (wide-cut) not permitted Avgas not permitted Typical precautions with kerosene: crew at the doors, exits and escape routes kept clear passengers told; seat belts unfastened; no smoking aircraft and bowser bonded together
Chapter 27 · Turbine Fuels
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Refuelling with passengers on board, or while they are boarding or leaving, is a direct result of the flash point. It is allowed only with kerosene such as Jet A-1, and only with precautions in place. With wide-cut fuel, Jet B or Avtag, and with avgas, it is not permitted, because their low flash points mean there is ignitable vapour around the tank vents during refuelling. The usual precautions with kerosene are: qualified crew at the doors, exits and escape routes kept clear, the passengers informed, seat belts unfastened and no smoking, and two-way communication with the refuelling crew. The aircraft and the bowser are bonded together so that static electricity cannot produce a spark. In the exam, if you are asked which fuel allows refuelling with passengers on board, the answer is always Jet A-1.
Part 2 · Looking at fuel
Turbine fuel is not dyed Turbine fuels keep their natural colour : anything from straw yellow to completely colourless Contrast: avgas is dyed by grade, e.g. 100LL blue So colour cannot tell you the grade of a turbine fuel Grade labels: Jet A-1 white on black , avgas white on red A good sample is clear and bright : no haze, no free water, no sediment Turbine fuel is never dyed colourless pale straw yellow all normal for Jet A-1 JET A-1 AVGAS 100LL white on black white on red Grade labels on equipment, not the colour, tell you what it is
Chapter 27 · Turbine Fuels
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Turbine fuels are not dyed. They keep their natural colour, which can be anything from straw yellow to completely colourless, and all of these are normal. Compare this with avgas, which is dyed by grade so that you can recognise it: one hundred low lead, for example, is blue. Because jet fuel has no dye, you cannot tell its grade by looking at it. Instead, every hydrant, bowser and container carries a grade label: Jet A-1 is shown in white letters on a black background, while avgas is shown in white on red. What you can judge by eye is cleanliness. A good sample is described as clear and bright: no haze, no free water and no sediment. Anything else needs a closer look, and that is our next slide.
Part 2 · Looking at fuel
Reading a cloudy fuel sample A cloudy or hazy sample may contain air or water Air : the cloud rises quickly and the sample clears from the bottom up Water : the cloud falls slowly and collects at the bottom Cloudiness usually means water Water droplets are heavier than fuel, so they settle given time Air Water haze rises and clears quickly, from the bottom up haze sinks slowly and collects at the bottom
Chapter 27 · Turbine Fuels
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Sometimes a fuel sample looks cloudy or hazy, and there are two common reasons. If the cloudiness rises quickly towards the top, and the sample clears from the bottom upwards, the haze is just tiny air bubbles, perhaps from fast pumping, and it does no harm. If the cloud falls slowly towards the bottom of the jar, the haze is fine water droplets, and in time they collect as a layer of free water at the bottom. Watch the two jars: on the left the bubbles race up and vanish; on the right the drops drift down slowly and the water layer grows. Remember the exam rule: a cloudy appearance usually indicates the presence of water. The reason water sinks is simple: it is heavier than fuel, with a relative density of one against about nought point eight.
Part 3 · Water
Water is always in the fuel Dissolved water: invisible, held in solutionEntrained (suspended) water: fine droplets that make the fuel cloudy Free water: settles in a layer at the bottom of the tank Main source in the aircraft: moist air drawn in through the vent system , condensing on cold tank walls Amount depends on refinery quality control and care in storage and transfer vent: moist air in condensation on cold tank walls water drain at the lowest point dissolved: invisible entrained: droplets, cloudy free water settles out Water is heavier than fuel (relative density 1.0 against 0.8)
Chapter 27 · Turbine Fuels
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Water is always present in fuel, in three forms. Dissolved water is held in solution and is invisible. Entrained or suspended water is made of fine droplets, and it is what makes fuel look cloudy. Free water has settled out and lies in a layer at the bottom of the tank. How much water arrives with the fuel depends on the refinery quality control and on care during storage and transfer. Once the fuel is in the aircraft, the main source is the atmosphere: as fuel is used, moist air is drawn into the tank through the vent system, and its moisture condenses on the cold tank walls. Watch the scene: droplets sink, the free water settles at the bottom, and the drain valve at the lowest point lets it out.
Part 3 · Water
Fuel icing: water comes out of solution in the cold -40 -30 -20 -10 0 10 20 30 40 0 40 80 120 160 Fuel temperature (°C) dissolved water (ppm) 70 ppm at +20 °C 15 ppm at −20 °C Colder fuel holds less dissolved water (typical trend) the excess comes out as droplets, then ice crystals Worked example Load 20 000 kg of fuel at +20 °C Dissolved 20 000 × 70 ppm ≈ 1.4 kg of water Cold-soaked at −20 °C it can hold only 15 ppm Still dissolved 20 000 × 15 ppm ≈ 0.3 kg Released ≈ 1.1 kg of free water about a litre: enough to block a filter As the aircraft climbs, the fuel cools, droplets form and then freeze into ice crystals that can block filters and fuel system components.
Chapter 27 · Turbine Fuels
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The first problem water causes is icing. Warm fuel can hold more dissolved water than cold fuel. As the aircraft climbs and the fuel in the wings cools, the amount of water it can hold falls, so the excess comes out of solution as tiny droplets, and as the temperature drops further, those droplets freeze into ice crystals. Ice crystals are carried along with the fuel and can block the filter and the fine passages of the fuel control unit. Look at the worked example. Twenty thousand kilograms of fuel loaded at plus twenty degrees holds roughly one point four kilograms of dissolved water. Cold-soaked to minus twenty, it can only hold about a quarter of that, so about one point one kilograms of water comes out of solution. That is roughly a litre of ice crystals, which is more than enough to block a filter.
Part 3 · Water
Microbial growth: the fuel fungus A fungus, Cladosporium resinae , is present in all turbine fuels It grows rapidly where there is water , at the fuel–water interface Forms long green filaments and mats that block filters and fuel components Its waste products are corrosive , especially to tank sealants Defence: drain water regularly, FSII , and biocide treatment when needed At the fuel–water interface fuel: food (hydrocarbons) filaments and mats grow upwards water: needed to grow acid waste pits the tank skin and attacks sealant loose mats block filters and gauge probes
Chapter 27 · Turbine Fuels
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
The second problem is microbial growth. A fungus called Cladosporium resinae is present in all turbine fuels. It feeds on the hydrocarbons in the fuel, but it can only live and grow where there is water, so it thrives in the free water at the bottom of the tanks, right at the interface between the water and the fuel. There it grows rapidly into long green filaments and mats. Loose pieces of these mats are carried into the fuel system, where they block filters and other components, and can upset the fuel quantity probes. Worse, the waste products of the fungus are acidic and corrosive, especially to the sealing compounds of integral wing tanks, and they can pit the tank structure. The defences are to drain the water regularly, to use the icing inhibitor additive, which also discourages the fungus, and to treat the tanks with a biocide when an infection is found.
Part 3 · Additives
Jet fuel additives Additives are blended in tiny amounts, a few parts per million up to about a tenth of one per cent, each to fix one weakness of the fuel.
FSII Fuel system icing inhibitor . Fights icing and fungal growth and corrosion caused by water in the fuel.
Lubricity agent (HITEC) Reduces wear in pumps and fuel system components, important with highly refined fuels.
Static dissipator Partly removes the static electricity hazard from fuel moving through modern high-flow refuelling systems.
Corrosion inhibitor Protects ferrous metals in pipelines and storage tanks; some also improve lubricity .
Metal de-activator Suppresses the catalytic effect of metals , especially copper , on fuel oxidation.
Antioxidant Stops gums and peroxides forming while fuel is stored.
Chapter 27 · Turbine Fuels
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Several additives are put into jet fuel. The fuel system icing inhibitor, F S I I, helps with both water problems we have just met: icing and fungal growth with its corrosion. A lubricity agent, often known by the trade name HITEC, reduces wear in the pumps and fuel components. This matters because modern refining removes many of the natural compounds that used to give fuel its lubricity. A static dissipator additive partly removes the hazard of static electricity, which builds up when fuel flows fast through modern high-flow refuelling systems. Corrosion inhibitors protect steel pipelines and storage tanks, and some of them also improve lubricity. Metal de-activators suppress the catalytic effect that some metals, particularly copper, have on fuel oxidation. And antioxidants stop gums forming in stored fuel.
Part 3 · Additives
How the icing inhibitor works FSII is far more soluble in water than in fuel, so it moves into the water droplets It lowers the freezing point of that water: droplets stay liquid, no ice crystals The treated water is hostile to microbes : less fungal growth and corrosion Standard in military fuel; in civil fuel only where the aircraft needs it , e.g. no fuel heater It does not remove water: free water must still be drained What FSII does the additive dissolves into each water droplet Freezing point of the water falls droplets stay liquid: no ice crystals Biostatic microbes cannot thrive in the treated water Not a cure-all free water must still be drained
Chapter 27 · Turbine Fuels
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
How does the icing inhibitor work? F S I I is much more soluble in water than in fuel, so once it is mixed into the fuel it moves into any water droplets that form. There it acts like antifreeze: it lowers the freezing point of the water, so the droplets stay liquid instead of turning into ice crystals that could block a filter. The treated water is also hostile to the fuel fungus, so the inhibitor slows microbial growth and the corrosion that comes with it. It is standard in military jet fuel. In civil Jet A-1 it is normally added only when the aircraft needs it, for example a type without a fuel heater. But remember that F S I I does not remove water. The free water still has to be drained from the tanks.
Part 3 · Keeping water out
Minimising water in the tanks Settle and drain : let the fuel stand after refuelling, then drain the water from the drain valve at the lowest point Fuel heater : removes ice crystals before the engine fuel systemExclude the atmosphere : tanks filled full leave no room for moist airCaution: fuel expands about 0.1 % per °C ; a brim-full tank can spill through the vents next day Worked example: 20 000 L warming by 25 °C grows by about 500 L Part full overnight large moist air space condenses as it cools Topped up full almost no air But fuel expands as it warms Kerosene grows about 0.1 % per °C 20 000 L warming by 25 °C: 20 000 × 0.00099 × 25 ≈ 495 L more volume a brim-full tank spills it out of the vents
Chapter 27 · Turbine Fuels
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are three ways to minimise water once the fuel is in the aircraft. First, settle and drain. If the fuel is allowed to stand after refuelling, the water droplets, being heavier, fall to the bottom of the tank, where they can be drained off through the water drain valve. Second, a fuel heater removes any ice crystals before the fuel enters the engine fuel system. Third, exclude the atmosphere: if the tanks are filled to full, there is no room for moist air and its water. But be careful. Fuel expands as it warms, by about a tenth of one per cent per degree. If twenty thousand litres warms by twenty-five degrees the next day, it grows by about five hundred litres, and a brim-full tank will spill that through the vents. In the scene, the tank is topped up full, then the fuel expands and spills out of the vents.
Part 3 · Keeping water out
Warming the fuel Fuel passes through a heat exchanger before the engine filter, to remove ice crystals formed at altitude The fuel heater uses compressor delivery air The fuel-cooled oil cooler warms the fuel with hot engine oil Two jobs at once: the oil is cooled and the fuel is warmed Warm fuel also helps against waxing Two ways to warm the fuel Fuel-cooled oil cooler cold fuel warmed fuel hot engine oil in out, cooler Fuel heater cold fuel warmed fuel compressor delivery air in out, cooler Ice crystals are melted before they reach the filter
Chapter 27 · Turbine Fuels
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Fuel that has been cold-soaked at altitude may carry ice crystals, so before it reaches the engine filter it passes through a heat exchanger. Two kinds are used. The fuel heater uses compressor delivery air, hot air from the engine, to warm the fuel. And most gas turbines also have a fuel-cooled oil cooler. Here the hot engine oil flows through a matrix surrounded by cold fuel, so the oil gives up its heat to the fuel. This is a rare case of getting something for nothing: the oil has to be cooled anyway, and the fuel benefits from being warmed. Two jobs for the price of one. Watch the fuel temperature rise as it passes through the cooler. Warming the fuel also helps against waxing, which is our next topic. We will look at both heat exchangers in detail in the fuel systems lesson.
Waxing : heavy hydrocarbons come out of the fuel as paraffin wax crystals at low temperatureThe crystals clog the fuel filter and upset the fuel control unit Cures: the refinery keeps heavy hydrocarbons low ; a fuel heater in the engine fuel system Waxing points: Jet A-1 −50 °C , Jet A −40 °C , Jet B −60 °C On long cold flights the crew monitors fuel temperature and keeps a margin above the limit Wax at the filter cold fuel + wax flow falls Wax crystals (white) clog the filter element Cures refinery keeps heavy hydrocarbons low fuel heater upstream of the filter watch fuel temperature on long cold flights
Chapter 27 · Turbine Fuels
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Waxing is the deposit of heavy hydrocarbons from the fuel at low temperature. As the fuel gets colder, these heavy molecules come out as paraffin wax crystals, a bit like fat setting in cold soup. The crystals clog the fuel filter and can upset the working of the fuel control unit. In the scene, watch the filter element fill with wax; the pressure drop across it climbs and the flow to the fuel control unit falls. The effects are kept small in two ways: the refinery keeps the level of heavy hydrocarbons low, and a fuel heater in the engine fuel system warms the fuel before the filter. Remember the waxing points: minus fifty for Jet A-1, minus forty for Jet A, and minus sixty for Jet B. On long flights in very cold air, crews watch the fuel temperature and keep a margin above the limit, for example by descending or flying faster.
Part 4 · Altitude
Boiling and vapour lock 0 5k 10k 15k 20k 25k 30k 35k 40k 45k 0 200 400 600 800 1000 Altitude (feet) pressure on the fuel (hPa) SL 1013 hPa FL200 466 hPa FL350 238 hPa FL420 170 hPa Why it matters Lower pressure on the fuel surface → lower boiling point → vapour forms in the lines → vapour lock: the engine-driven pump loses its supply At FL420 only 17 % of sea-level pressure is left Wide-cut fuel is worst: more volatile The temperature at which fuel boils falls as the pressure on its surface falls : high altitude means a lower boiling point.
Chapter 27 · Turbine Fuels
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
The temperature at which a liquid boils depends on the pressure on its surface. Water boils at a hundred degrees at sea level, but at a lower temperature on a high mountain. Fuel is the same. As the aircraft climbs, the pressure on the fuel surface falls, so its boiling point falls too, and the fuel is more and more likely to boil and form vapour. The graph shows how fast the pressure drops: from one thousand and thirteen hectopascals at sea level to about two hundred and forty at flight level three five zero, and about one hundred and seventy at flight level four two zero, only seventeen per cent of the sea-level value. Vapour bubbles in the fuel lines cause a vapour lock that cuts off the supply to the engine, and the engine stops. Wide-cut fuel, being more volatile, is the most at risk.
Part 4 · Altitude
Booster pumps push the fuel Booster pumps are fitted inside the fuel tanks They push fuel to the engine instead of the engine pump sucking it The line stays at positive pressure , above the fuel’s vapour pressure: no vapour lock Tank vents are often fed by ram air for a small positive pressure on the fuel If the boosters fail, the engine LP pump sucks: cavitation risk at high level, so descend Push, don’t suck BP LP tank pipe under positive pressure fuel cannot boil in the line engine LP pump If the booster pumps fail the engine LP pump sucks fuel up: pressure in the line falls below the vapour pressure at high level → descend
Chapter 27 · Turbine Fuels
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
The answer to vapour lock is the booster pump. Booster pumps are fitted inside the fuel tanks, and they push fuel towards the engine, instead of the engine-driven pump having to suck it up from the tanks. Pushing keeps the whole feed line at a positive pressure, above the vapour pressure of the fuel, so it cannot boil in the pipes. Many aircraft also feed their tank vents from a ram-air scoop, which puts a small positive pressure on the fuel surface. If the booster pumps fail, the engine low pressure pump has to suck fuel up from the tank. The pressure in the line then falls, and at high altitude the fuel may boil and the pump may cavitate. That is why the procedure after a booster pump failure may call for a descent to a lower level.
Part 4 · Density
Specific gravity changes with temperature -40 -30 -20 -10 0 10 20 30 40 50 0.76 0.78 0.80 0.82 0.84 Fuel temperature (°C) relative density 0.825 at −20 °C 0.800 at +15 °C 0.782 at +40 °C Warmer fuel is less dense (typical Jet A-1) Worked example Uplift needed 16 000 kg At SG 0.80 16 000 ÷ 0.80 = 20 000 L At SG 0.78 (warm fuel) 16 000 ÷ 0.78 = 20 513 L Using 0.80 by mistake 513 L short ≈ 400 kg less fuel Always convert litres with the measured SG Specific gravity, also called relative density , varies inversely with temperature . Fuel is sold by volume but the aircraft is loaded and performs by mass .
Chapter 27 · Turbine Fuels
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Specific gravity, also called relative density, compares the density of the fuel with that of water. It varies inversely with temperature: warm fuel expands, so it is lighter for each litre, and cold fuel is denser. For Jet A-1, a typical value of nought point eight at fifteen degrees falls to about nought point seven eight at forty degrees and rises to about nought point eight two five at minus twenty. Why does it matter? Fuel is delivered by volume, in litres, but the aircraft is loaded by mass, in kilograms. Look at the worked example. You need sixteen thousand kilograms. At nought point eight, that is twenty thousand litres. But if the fuel is warm, at nought point seven eight, you need about twenty thousand five hundred litres. Use the wrong figure and you leave about four hundred kilograms behind.
Part 4 · Density
Density, power and weight The heat released per litre is directly related to the specific gravity So a change in density could change engine power for the same volume of fuel Modern fuel control units compensate automatically: little practical effect An SG adjuster is reset when the grade changes, e.g. Jet A-1 to Jet B A change in SG also changes the weight of the aircraft for the same fuel volume Same litre, different energy 1 litre SG 0.78 0.78 kg ≈ 33.7 MJ warm, light fuel 1 litre SG 0.82 0.82 kg ≈ 35.4 MJ cold, dense fuel A unit metering by volume would give more power with dense fuel and less with light fuel Modern fuel control units compensate An SG adjuster is reset if the grade changes, for example Jet A-1 to Jet B
Chapter 27 · Turbine Fuels
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Density also affects power and weight. The heat released by a litre of fuel is directly related to its specific gravity: a denser litre contains more kilograms, and so more energy. In the example, a litre at nought point seven eight gives about thirty-three point seven megajoules, while a litre at nought point eight two gives about thirty-five point four. A fuel control that metered purely by volume would therefore give more power with dense fuel and less with light fuel. On modern aircraft this makes little difference, because the fuel control unit compensates automatically for changes in density. Some units have a specific gravity adjuster, which is reset if the aircraft changes grade, for example from Jet A-1 to Jet B. And of course, the same volume of denser fuel weighs more, which changes the weight of the aircraft.
Part 4 · Using the right fuel
The right fuel in the right engine Jet fuel in a piston engine : very low anti-knock value, detonation and rapid engine failureAvgas in a turbine : only where the engine manual allows, for limited periodsJet B for Jet A-1 : an approved alternative for many engines; reset the SG adjuster and take the fire precautionsDefences: grade labels , different nozzle sizes , and checking the delivery every time Wrong fuel, wrong engine Jet fuel in a piston engine detonation and pre-ignition within minutes: power loss, engine failure Avgas in a turbine only if the engine manual allows it, for limited hours: lead deposits, poor lubricity, vapour lock Jet B instead of Jet A-1 approved alternative for many turbines: reset the SG adjuster, observe vapour and fire precautions Labels, nozzle sizes and checks at every uplift
Chapter 27 · Turbine Fuels
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Finally, getting the right fuel into the right engine. Kerosene has a very low anti-knock value, so jet fuel put into a piston engine causes detonation and pre-ignition, and the engine can fail within minutes of take-off. Avgas can be burned in some turbine engines, but only where the engine manual allows it and for a limited number of hours, because the lead leaves deposits and the fuel has poor lubricity and a high vapour pressure. Jet B is an approved alternative to Jet A-1 for many turbine engines; when it is used, the fuel control unit specific gravity adjuster is reset, and the extra fire precautions for a low flash point fuel apply. The defences against misfuelling are the grade labels, different nozzle sizes on the hoses, and checking the grade and the delivery note every time.
Summary
Turbine fuels in eight lines Jet A-1 (Avtur) Kerosene, SG 0.8 , flash +38.7 °C , wax −50 °C
Jet A and Jet B Jet A wax −40 °C , USA. Jet B wide-cut, SG 0.77 , flash −20 °C , wax −60 °C
Fire safety Refuel with passengers on board only with kerosene , never wide-cut or avgas
Colour and haze Not dyed : straw to colourless. Haze rising fast = air; falling slowly = water
Water Enters through the vents ; causes icing , fungus (Cladosporium resinae) and corrosion
Fixes FSII , settle and drain at the lowest point, fuel heaters , fill tanks full
Cold and altitude Wax clogs filters; low pressure lowers the boiling point ; booster pumps push
Density SG falls as temperature rises; changes power and weight ; the FCU compensates
Chapter 27 · Turbine Fuels
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. Jet A-1, or Avtur, is kerosene with a specific gravity of nought point eight, a flash point of thirty-eight point seven and a waxing point of minus fifty. Jet A waxes at minus forty and is found in the United States; Jet B is wide-cut, nought point seven seven, flash point minus twenty, waxing point minus sixty. Refuelling with passengers on board is allowed only with kerosene. Turbine fuel is not dyed, and a haze that falls slowly is water. Water gets in through the vents and causes icing, fungal growth and corrosion; we fight it with the icing inhibitor, by draining, by fuel heaters and by filling the tanks. In the cold, wax clogs filters; at altitude, low pressure lowers the boiling point, so booster pumps push the fuel. And specific gravity falls as the fuel warms, changing power and weight.