Engines · Chapter 14
Gas Turbine Principles How a gas turbine makes thrust: Newton's third law, the Brayton cycle, the gas laws inside the engine, and the family of turbojets, turboprops, turboshafts and turbofans.
intake
compress
burn
expand
exhaust
continuous flow: compress · burn · expand
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to the gas turbine. Every airliner you will fly, and most turboprops and helicopters too, is powered by one. In this lesson we build the whole idea from the ground up. We start with the reaction principle and the simple equation for thrust, then follow a parcel of air through the engine: compressed, heated at constant pressure, and expanded through the turbine and nozzle. We will use the gas laws to see why pressure, temperature and velocity change the way they do. Then we meet the family: the turbojet, the turboprop, the turboshaft and the bypass engines, and we will see why the high bypass turbofan rules the airliner world. Watch the turbofan on the right: the blue low pressure spool and the bronze high pressure spool turn at different speeds.
Roadmap
From a pinwheel of steam to the turbofan
intake
compression
combustion
expansion
exhaust jet
air in
thrust = mass flow × velocity change
1 · Reaction Newton's third law, the thrust equation, and why a big slow jet beats a small fast one.
2 · The cycle Brayton versus Otto, the pressure-volume diagram, constant-pressure combustion, the temperature limit.
3 · Inside the engine Gas laws, pressure ratio, cold days, ducts, and p, T and V from intake to nozzle.
4 · The family Spools, turboprop, turboshaft, bypass ratio, turbofan, propulsive efficiency, modules.
Chapter 14 · Gas Turbine Principles
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
This lesson has four parts. First, the reaction principle: Newton's third law, the simple equation for thrust, and why accelerating a large mass of air gently is better than accelerating a small mass violently. Second, the working cycle: how the gas turbine's Brayton cycle compares with the piston engine's Otto cycle, what the pressure volume diagram tells us, why combustion happens at constant pressure, and what limits the temperature. Third, we go inside the engine with the gas laws and look at what the ducts do to pressure, temperature and velocity from the intake to the nozzle. Finally, we meet the family of engines: single and multi-spool turbojets, turboprops, turboshafts, bypass engines and the high bypass turbofan, and we compare their propulsive efficiency. Almost every exam question on gas turbine basics comes from one of these four parts.
Part 1 · Reaction
Jet propulsion is reaction Jet propulsion: a force in the opposite direction to a jet of gas or liquid escaping under pressure Newton's third law : for every force there is an equal and opposite reaction Everyday examples: a lawn sprinkler , a firework rocket The jet does not push on the atmosphere : thrust comes from the mass expelled and the velocity change given to it History: Hero (1st century AD), Lorin's athodyd (1913), Whittle flies a jet aircraft (1941)
Hero's engine
A jet engine
steam
jets back → sphere spins
gas pushed back
(action)
engine pushed forward (reaction)
Newton's third law
equal and opposite forces
From idea to aeroplane
c. AD 60
Hero
1687
Newton
1913
Lorin: athodyd
1941
Whittle flies
all reaction engines
Chapter 14 · Gas Turbine Principles
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Jet propulsion is simply reaction. When a jet of gas or liquid escapes under pressure, a force acts in the opposite direction. That is Newton's third law: for every force there is an equal and opposite reaction. A garden sprinkler spins for exactly this reason, and so does Hero's engine on the left, described in Alexandria in the first century A D. Steam escapes backwards from two bent tubes and the sphere spins the other way. A gas turbine does the same thing with air: it pushes a mass of gas backwards and the reaction pushes the engine forwards. A very common misconception is that the jet pushes against the air behind the aircraft. It does not; a rocket works perfectly well in a vacuum. The thrust depends only on the mass of gas expelled and the change of velocity given to it. Lorin proposed a ram-jet duct in nineteen thirteen, and Frank Whittle's engine flew in nineteen forty one.
Part 1 · Reaction
Thrust = mass flow × velocity change Force = mass × acceleration, so thrust = ṁ × (Vjet − Vin ) ṁ : the mass of air passing through the engine each secondThe heat added by burning fuel is what accelerates the air Static, 50 kg/s at 600 m/s: 30 kN At 250 m/s the same jet gives only 17.5 kN : the faster we fly, the smaller the velocity change
Thrust = ṁ × (Vjet − Vin )
mass flow per second × velocity change
Standing on the runway
air in
0 m/s
jet out
600 m/s
50 kg/s × (600 − 0) m/s = 30 kN
Flying at 250 m/s (about 490 kt)
air in
250 m/s
jet out
600 m/s
50 kg/s × (600 − 250) m/s = 17.5 kN
Same jet speed, faster aircraft: smaller velocity change, less thrust
Chapter 14 · Gas Turbine Principles
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Newton's second law gives us the thrust equation. Force equals mass times acceleration, and for a steady flow that becomes the mass of air passing through the engine each second multiplied by the change in its velocity: jet velocity minus the velocity at which the air came in. The energy for that acceleration comes from the heat released by burning fuel. Let us put in some numbers. An engine swallows fifty kilograms of air per second and throws it out at six hundred metres per second. Standing on the runway the air arrives at zero, so the thrust is fifty times six hundred, thirty thousand newtons, or thirty kilonewtons. Now fly at two hundred and fifty metres per second, about four hundred and ninety knots. The air already arrives at two hundred and fifty, so the velocity change is only three hundred and fifty, and the thrust falls to seventeen and a half kilonewtons. That fall with forward speed is something we will meet again in the thrust lesson.
Part 1 · Reaction
Big and slow, or small and fast? A propeller moves a large mass of air backwards fairly slowly A pure jet throws a small mass backwards very fast Both can give the same thrust: thrust = mass × velocity change But energy left in the jet goes with velocity change squared : the fast jet wastes far more So a large mass with a small acceleration gives the higher propulsive efficiency
Same thrust, 20 kN, at 150 m/s
Propeller
400 kg/s, +50 m/s
thrust = 400 × 50 = 20 kN
energy left in the jet ≈ 0.5 MW
propulsive efficiency ≈ 86 %
Pure jet
50 kg/s, +400 m/s
thrust = 50 × 400 = 20 kN
energy left in the jet ≈ 4 MW
propulsive efficiency ≈ 43 %
Large mass, small acceleration wastes far less energy
Chapter 14 · Gas Turbine Principles
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
The gas turbine and the piston engine with propeller work on the same principle: both push a mass of air backwards. The difference is how. A propeller moves a large mass of air fairly slowly; a pure jet throws a small mass of air backwards very fast. Both can make the same thrust. In this example we want twenty kilonewtons at one hundred and fifty metres per second. The propeller handles four hundred kilograms per second and speeds it up by only fifty metres per second. The jet handles just fifty kilograms per second but speeds it up by four hundred. Same thrust. But the kinetic energy left behind in the jet goes with the square of the velocity change. The propeller leaves about half a megawatt in its slipstream; the jet leaves four megawatts. That wasted energy is why the propeller's propulsive efficiency is about eighty six per cent and the jet's only about forty three. Remember the rule: a large mass with a small acceleration is more efficient.
Part 2 · The cycle
Otto cycle and Brayton cycle The same four jobs are done in both engines, but in a very different way:
Piston engine (Otto cycle) Gas turbine (Brayton cycle) Processes induction, compression, combustion + power, exhaust induction, compression, combustion, exhaust (expansion) How intermittent : one stroke after another in the same cylindercontinuous : each job in its own part of the engineCombustion at (nearly) constant volume at (nearly) constant pressure Power one stroke in four makes power, three absorb it no idle strokes; power taken by the turbine Peak pressure over 1 000 psi: strong, heavy cylinders no peaks: light construction Fuel high octane to avoid detonation low octane kerosene is fineResult lower power/weight ratio much higher power/weight ratio
Chapter 14 · Gas Turbine Principles
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The piston engine works on the Otto cycle and the gas turbine on the Brayton cycle. They do the same jobs: take air in, compress it, burn fuel in it and get work out as it expands, then exhaust it. The difference is how. In the piston engine all of this happens in one cylinder, one stroke after another, so it is intermittent, and combustion happens with the piston near top dead centre, close to constant volume. Only one stroke in four makes power; the other three absorb it. In the gas turbine each job has its own section of the engine and all of them happen at the same time, continuously. Combustion takes place at almost constant pressure, and the power is developed in the turbine. With no idle strokes there is far more time and space for burning fuel, so a gas turbine has a much higher power to weight ratio. And without pressure peaks, the construction can be light and the fuel can be low octane.
Part 2 · The cycle
Every job in its own place, all the time
Intake
Compressor
Combustion chamber
Turbine
Exhaust nozzle
one shaft
The turbine takes just enough energy from the gas to drive the compressor on the same shaft; the rest leaves the nozzle as thrust.
Chapter 14 · Gas Turbine Principles
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the simplest gas turbine, a single spool turbojet, with the air flowing from left to right. Follow a parcel of air. The intake delivers it smoothly to the compressor, which squeezes it to many times atmospheric pressure. In the combustion chamber fuel is sprayed in and burned continuously, so the air gets very hot and its volume increases enormously. The hot gas then expands through the turbine, which takes out the energy needed to drive the compressor through the shaft that joins them. What energy is left accelerates the gas through the exhaust nozzle and makes the thrust. Notice the colours of the air: blue and cool at the front, warming through the compressor, orange and white in the combustor, cooling through the turbine and nozzle. And all of it happens at once, all the time, which is the key difference from the piston engine.
Part 2 · The cycle
The pressure-volume diagram A → B : compression; pressure up, volume down (work put in by the compressor)B → C : fuel burned at, in theory, constant pressure ; volume increases greatlyIn practice the combustor loses 3 to 6 % of its pressure (swirl and turbulence) C → D : expansion through the turbine and jet pipe back towards atmospheric pressureThe area enclosed is the useful work of the cycle
The Brayton cycle (pressure ratio 8)
0
0.5
1
1.5
2
2.5
0
2
4
6
8
Volume of 1 unit of air (relative)
Pressure (atmospheres)
A
B
C
D
compression
(compressor)
combustion at ≈ constant pressure
expansion
(turbine and jet pipe)
to atmosphere
dashed: real 3–6 % pressure drop
Volume grows 2.5 times in combustion; shaded area = useful work
Chapter 14 · Gas Turbine Principles
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
This pressure volume diagram is the Brayton cycle, computed here for a pressure ratio of eight. Air at atmospheric pressure enters at A. The compressor squeezes it along the curve to B: the pressure rises eight times and the volume shrinks. At B fuel is added and burned. In theory this happens at constant pressure, so the line from B to C is flat, and the volume more than doubles because the gas is so much hotter. In a real engine the combustion chamber loses a little pressure, between three and six per cent, because it has to create swirl and turbulence to mix fuel and air; that is the dashed line. From C to D the hot gas expands through the turbine and the jet pipe, ideally all the way back to atmospheric pressure, and is then discharged. The area enclosed by the loop is the useful work. The turbine needs part of it to drive the compressor; the rest is thrust or shaft power.
Part 2 · The cycle
Constant-pressure combustion Combustion is continuous and the chamber is open at both ends , so the pressure cannot build up No pressure peaks; a piston engine must withstand more than 1 000 psi at each firing So a gas turbine can use relatively light construction No detonation problem: low octane fuels are the rule Continuous burning leaves more time to burn the fuel
Piston cylinder: intermittent peaks
0 psi
500 psi
1000 psi
> 1 000 psi
Gas turbine combustor: continuous, steady
0 psi
500 psi
1000 psi
≈ 440 psi (pressure ratio 30 : 1)
No peaks: light casings and low octane fuel
Chapter 14 · Gas Turbine Principles
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why does a gas turbine burn its fuel at constant pressure? Two reasons. The process is continuous, and the combustion chamber is not a closed box: it is open at the front to the compressor and at the back to the turbine. As the fuel burns, the gas simply expands and flows on through the engine, so the pressure stays steady. Compare the two traces. In a piston cylinder the pressure is low most of the time, then spikes above one thousand pounds per square inch at every firing stroke. The cylinders and crankcase must be strong and heavy to cope, and high octane fuel is needed to stop the charge detonating. In the gas turbine the combustor pressure is steady, about four hundred and forty pounds per square inch at a pressure ratio of thirty to one, with no peaks at all. That is why light construction and low octane fuels are the rule rather than the exception.
Part 3 · Inside the engine
The gas laws in the engine Boyle : at constant temperature, absolute pressure is inversely proportional to volume (P × V = constant)Charles : at constant pressure, volume is proportional to absolute temperature Combined law : P × V ÷ T = constantCompression: P up, V down, T up ; combustion: V up at nearly constant P Expansion in the turbine: P and T down , V up
Boyle
P × V = constant
at constant temperature
Charles
V ∝ T (absolute)
at constant pressure
Combined
P × V ÷ T = constant
pressure, volume and temperature together
In the engine (pressure ratio 10)
Compression
288 K → 556 K
P up, V down, T up
Combustion
556 K → 1 500 K
V × 2.7, P ≈ constant
Expansion
turbine + nozzle
P and T down, V up
Always use absolute temperature (K = °C + 273)
Chapter 14 · Gas Turbine Principles
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
The air in a gas turbine changes its pressure, volume and temperature as it gains and loses heat, and those changes follow the gas laws. Boyle's law says that if you compress a gas at constant temperature, its absolute pressure is inversely proportional to its volume. On its own that does not help much, because real compression always heats the air. Charles's law says that at constant pressure, volume is proportional to absolute temperature, which is just what happens in the combustion chamber. Put them together and you have the combined gas law: pressure times volume divided by absolute temperature is constant. Look at the worked numbers. Compress air at two hundred and eighty eight kelvin ten times and it heats to about five hundred and fifty six kelvin. Burn fuel until it reaches fifteen hundred kelvin at nearly constant pressure, and its volume grows about two point seven times. In the turbine, pressure and temperature fall and the volume grows again.
Part 3 · Inside the engine
Higher pressure ratio, better efficiency During compression, work is done on the air: pressure up, volume down, temperature up Higher compression (pressure) ratios give higher thermal efficiency and therefore a lower specific fuel consumption Early jets: about 4 : 1. Modern turbofans: 30 to 50 : 1 The gain flattens off at high ratios, and the compressor becomes harder to build
Ideal thermal efficiency vs pressure ratio
1
10
20
30
40
0 %
20 %
40 %
60 %
80 %
Overall pressure ratio
4 : 1 → 33 %
early jets
10 : 1 → 48 %
30 : 1 → 62 %
modern engines
40 : 1 → 65 %
Higher pressure ratio → higher efficiency, lower SFC
η = 1 − 1 ÷ r0.286 (ideal cycle, γ = 1.4)
Chapter 14 · Gas Turbine Principles
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The more we compress the air before we burn the fuel, the more efficiently the engine turns heat into work. The graph shows the ideal Brayton cycle efficiency, computed from the pressure ratio. At four to one, roughly where the early jets were, it is only about thirty three per cent. At ten to one it is about forty eight per cent, and at thirty to one, typical of a modern turbofan, about sixty two per cent. Real engines fall short of these ideal figures because of component losses, but the trend is exactly right: a higher compression ratio gives higher thermal efficiency, which means a lower specific fuel consumption, less fuel burned for each unit of thrust per hour. Notice, though, that the curve flattens. Going from thirty to forty gains only about three per cent, while the compressor needs more stages and becomes harder to keep stable. That trade-off is part of the next lesson on compressors.
Part 3 · Inside the engine
What a cold day does Lower air temperature means higher density : more mass in every litre of air The compressor has to work harder on the heavier air If the fuel control does not compensate, the RPM drops (idle RPM is lower on a cold day) With compensation, more fuel holds the RPM and gives more thrust Gas turbine efficiency increases as ambient temperature decreases
+15 °C (288 K)
density × 1.00
−15 °C (258 K)
density × 1.12
ρ ∝ 1 ÷ T at the same pressure: 288 ÷ 258 = 1.116
Compressor
more mass per turn → more work needed
Fixed fuel flow
RPM falls (idle RPM is lower)
With FCU
fuel added to hold RPM → more thrust
Efficiency
higher on a cold day
Chapter 14 · Gas Turbine Principles
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Outside air temperature changes the density of the air, and that changes how the engine behaves. On a minus fifteen degree day the air is about twelve per cent denser than at plus fifteen degrees, so every turn of the compressor has more mass to push. The compressor has to work harder. If nothing else changes, that extra load slows the engine down, so the R P M drops. That is the classic exam point: on a cold day an engine without fuel control compensation will idle at a lower R P M. A modern fuel control unit senses this and adds fuel to hold the speed, so the denser air then gives more thrust. And the engine is more efficient on a cold day too. The work needed to compress the air is smaller when it starts cold, so for the same turbine entry temperature a bigger share of the energy is left over as useful output. Hot days do the opposite.
Part 3 · Inside the engine
The temperature limit The gas turbine is a heat engine : the hotter the combustion, the greater the expansion and the efficiency The limit is set by the materials of the nozzle guide vanes and turbine blades They sit straight behind the combustor and carry huge loads at high RPM Modern materials and cooling (internal passages and a film of cool air) allow much hotter gas So newer engines have higher thermal efficiency than their predecessors
hot gas
cooling air inside the blade and
a cool film over its surface
gas ≈ 1 600 °C
alloy limit ≈ 1 100 °C
cooling air ≈ 600 °C
Turbine entry temperature is limited by the
nozzle guide vanes and turbine blades
typical modern values, for illustration
Chapter 14 · Gas Turbine Principles
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
A gas turbine is a heat engine, so the hotter we can make the gas in the combustion chamber, the more it expands and the more efficient the engine becomes. But there is a limit to how much heat we can release into the turbine. That limit is set by the materials of the nozzle guide vanes and the turbine blades. They sit directly behind the combustion chamber in the hottest gas, and the blades also carry enormous centrifugal loads while spinning at high speed. In a modern engine the gas can reach around sixteen hundred degrees, which is hotter than the alloy itself can stand. The answer is cooling. Air from the compressor, at perhaps six hundred degrees, flows through passages inside each vane and blade and out through tiny holes, laying a cool film over the surface. With better alloys and cooling, the latest engines run much hotter than their predecessors and so have a higher thermal efficiency.
Part 3 · Inside the engine
Pressure, temperature and velocity through the engine
Pressure: peak at compressor exit
Temperature: peak in the combustor
Velocity: highest in the jet
intake
compressor
combustion
turbine
jet pipe + nozzle
high
low
Chapter 14 · Gas Turbine Principles
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
This graph sits under the engine so you can see where each change happens. First the pressure, in blue. It rises steadily through the compressor and keeps rising slightly in the diffuser behind it. So the highest pressure anywhere in the engine is between the compressor and the combustion chamber, the compressor delivery air. It falls a little through the combustor, then drops sharply through the turbine and nozzle back to ambient. Now the temperature, in orange. Compression warms the air, then it jumps in the combustion chamber, where it is highest, and falls as the turbine extracts work. Finally the velocity, in green. Through the compressor it is kept fairly steady, it is slowed down before and in the combustor so the flame is not blown out, and it rises in the turbine and most of all in the exhaust nozzle, where the jet is fastest. Those three patterns are favourite exam questions.
Part 3 · Inside the engine
Ducts trade speed for pressure In subsonic flow a divergent duct slows the air: velocity down , pressure and temperature up A convergent duct does the reverse: velocity up , pressure and temperature down The diffuser after the compressor: free pressure rise and a slower flow for the combustor The nozzle guide vanes form convergent passages: fast gas gives the turbine more torque The exhaust nozzle converts pressure into jet velocity
Divergent duct (diffuser)
compressor exit → combustion chamber
velocity
↓
static pressure
↑
temperature
↑
Convergent duct (nozzle guide vanes)
combustion chamber → turbine
velocity
↑
static pressure
↓
temperature
↓
Chapter 14 · Gas Turbine Principles
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
As the air passes through the engine, its velocity and pressure have to be changed in a controlled way, and the shapes of the ducts do the job. In subsonic flow, a divergent duct, one that gets wider, slows the air down, and its static pressure and temperature rise. A convergent duct does the opposite: the gas speeds up, and its pressure and temperature fall. Look at the two examples. Behind the last compressor stage a divergent duct, the diffuser, raises the pressure further without any extra work from the compressor, and slows the air so that the combustion chamber has an easier job keeping its flame alight. In front of the turbine, the nozzle guide vanes form convergent passages. They turn some of the pressure energy into velocity, and the faster the gas strikes the turbine blades, the more torque they receive. The exhaust nozzle at the very back converts the remaining pressure into jet velocity.
Part 4 · The family
The spool and the single-spool turbojet A spool : a compressor and a turbine joined on one shaft Single-spool axial-flow turbojet: small frontal area , long favoured for fighters The turbine drives the compressor; the remaining energy leaves as thrust Weakness: one speed for every stage makes smooth airflow hard to control across the RPM range In a pure turbojet all the air goes through the combustion chamber
Compressor
Turbine
one shaft = one spool
Combustion chamber
Small frontal area: early fighters
Chapter 14 · Gas Turbine Principles
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
When a compressor and a turbine are joined on one shaft, the rotating assembly is called a spool. The simplest engine has just one: the single spool axial flow turbojet. Its small frontal area made it the engine of choice for a long time where high forward speed mattered most, such as in fighter aircraft. The turbine extracts the energy needed to drive the compressor, and everything left over goes out of the jet pipe as thrust. In a pure turbojet every bit of the air that enters the intake passes through the combustion chamber, even though only part of it is actually used for burning. The weakness of the single spool is control. Every compressor stage is locked to the same speed, but at low R P M the front and rear stages would like to run at quite different speeds. That makes the airflow hard to keep smooth across the speed range, and leads us to the multi-spool engine.
Part 4 · The family
Two spools: more flexible, less surge LP turbine (rear) drives the LP compressor (front) on an inner shaft HP turbine drives the HP compressor on an outer, hollow shaft The spools are not connected: each finds its own best speed, N1 (LP) and N2 (HP) The LP spool turns slower than the HP spool Result: less prone to stall and surge , better acceleration; three spools add an IP spool
LP compressor (N1)
HP compressor (N2)
HP turbine
LP turbine
LP shaft runs inside the hollow HP shaft
Chapter 14 · Gas Turbine Principles
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Splitting the compressor into two parts, each with its own turbine, solves the single spool's control problem. In a twin spool engine, the low pressure compressor at the front is driven by the low pressure turbine at the rear, through an inner shaft. The high pressure compressor is driven by the high pressure turbine through an outer, hollow shaft that surrounds the inner one. The two spools are not mechanically connected, so each settles at the speed that suits its stages. The pilot sees them as N one, the low pressure spool, and N two, the high pressure spool, and the low pressure spool always turns more slowly. In the scene, the blue L P spool and the bronze H P spool are turning at different speeds. The big benefit is that a twin spool engine is much less prone to compressor stall and surge, and it accelerates better. A three spool engine simply adds an intermediate pressure spool between them.
Part 4 · The family
Engine station numbers Pressures (P) and temperatures (T) carry a number for their position, front to rear (classic numbering for a twin-spool engine):
Station Position Station Position P0 T0 ambient (free stream) P5 T5 HP turbine exit P1 T1 engine inlet P6 T6 LP turbine exit P2 T2 LP compressor delivery P7 T7 exhaust P3 T3 HP compressor delivery (highest pressure)P8 T8 propelling nozzle P4 T4 turbine entry (highest temperature) N1 · N2 LP spool speed · HP spool speed
Engine pressure ratio, EPR, compares exhaust and inlet pressure (P7 ÷ P1 here). Modern manuals use a different international numbering (e.g. station 2 for the fan face), so always check which one a question uses.
Chapter 14 · Gas Turbine Principles
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Engineers label the pressure and temperature at each point of the engine with a station number, starting at the front. This table shows the classic numbering for a twin spool engine. Nought is the free stream, ambient air. One is the engine inlet. Two is the delivery of the low pressure compressor and three the delivery of the high pressure compressor, which is the highest pressure in the engine. Four is turbine entry, the hottest point. Five and six are the exits of the high and low pressure turbines, seven is the exhaust and eight the propelling nozzle. N one and N two are the rotational speeds of the low and high pressure spools. You will meet P one again in the intakes lesson, because engine pressure ratio, the thrust gauge on many engines, compares exhaust pressure with inlet pressure. Be aware that modern manuals use a different international scheme, where the fan face is station two, so read each question carefully.
Part 4 · The family
The turboprop Almost all the gas energy is turned into shaft power : the turbine drives the compressor and the propeller The propeller is driven through a reduction gearbox Only a little residual jet thrust is left in the exhaust Output: equivalent shaft horsepower , ESHP = shaft power + jet thrust Static rule of thumb: 2.5 lbf of jet thrust ≈ 1 hp. 1 000 SHP + 250 lbf → 1 100 ESHP
Propeller
Reduction gear
Compressor
Combustor
Turbine
ESHP = shaft power + residual jet thrust
Chapter 14 · Gas Turbine Principles
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
The turboprop works just like the turbojet as far as the airflow is concerned: compress, burn at nominally constant pressure, expand. The big difference is what happens to the energy left in the gas. In a turbojet it becomes thrust. In a turboprop the turbine extracts almost all of it as shaft power: part drives the compressor, and the rest drives the propeller through a reduction gearbox, because the propeller must turn far more slowly than the turbine. An efficient turbine leaves only a little energy in the exhaust, a residual thrust. So the output of a turboprop is quoted as equivalent shaft horsepower: the shaft power plus an allowance for that jet thrust. On the ground, a useful rule is that two and a half pounds of jet thrust count as about one horsepower. An engine giving one thousand shaft horsepower and two hundred and fifty pounds of residual thrust is rated at about eleven hundred equivalent shaft horsepower.
Part 4 · The family
The turboshaft and the free power turbine A turboprop with the propeller replaced by an output shaft : helicopter rotors, APUs driving generators Almost all have a free power turbine : not connected to any compressor Free to run at the speed its load needs: a much wider speed range Gas generator : the compressors, combustor and the turbines that drive themA reverse-flow combustor makes the engine short and stiff, with a centrifugal HP stage
Output shaft
Axial stages
Centrifugal stage
Gas generator turbine
Free power turbine
Gas generator + free power turbine
Chapter 14 · Gas Turbine Principles
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
A turboshaft is essentially a turboprop with the propeller replaced by an output shaft. It drives helicopter rotors, and in a compact form with an alternator on its shaft it is the auxiliary power unit in the tail of most modern transport aircraft. Almost every turboshaft has a free power turbine, a turbine that is not connected to any compressor. Because it is free, it does not have to turn at a speed that suits the compressor, so it can run over a much wider speed range, exactly what a rotor or generator needs. Everything ahead of it, the compressors, the combustion chamber and the turbines that drive the compressors, is called the gas generator: its job is simply to produce a stream of hot, high pressure gas for the free power turbine. Many turboshafts use a reverse flow combustion chamber to make the engine shorter, stiffer and lighter, and that needs a centrifugal compressor stage to turn the air outwards.
Part 4 · The family
Bypass engines and bypass ratio Bypass ratio = air bypassing the hot core ÷ air going through the coreCore flow = primary (hot) airflow; bypass flow = secondary (cold) airflow Low ratio: about 1 or 2 : 1 ; high ratio: 5 : 1 and above (modern fans 9–12 : 1) Low bypass: air splits after the LP compressor ; streams meet again in a mixer Not all the air goes through the HP compressor. 5 : 1 = 5 kg bypassed per 1 kg through the core
Bypass ratio = bypass (cold) ÷ core (hot) mass flow
bypass duct: secondary, cold
core: primary, hot
mixer + nozzle
30 kg/s in → 15 kg/s bypass + 15 kg/s core
BPR = 15 ÷ 15 = 1 : 1 (low). High: 5 : 1 and above
Example 5 : 1 → 5 kg bypassed for every 1 kg through the core
Chapter 14 · Gas Turbine Principles
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
A bypass engine sends part of its air around the hot core instead of through it. The bypass ratio is the mass of air that bypasses the core divided by the mass that goes through it. The air through the core is called the primary or hot stream, and the bypass air the secondary or cold stream. A ratio of five to one therefore means five kilograms bypassed for every one kilogram through the core, not five out of every ten. Low bypass engines have ratios of about one or two to one; high bypass engines five to one and above, and modern fans reach nine to twelve. In this low bypass engine the air is treated exactly as in a turbojet up to the end of the low pressure compressor. Then it splits: some flows down the bypass duct and the rest continues into the high pressure compressor and the core. The two streams meet again in a mixer before the nozzle.
Part 4 · The family
The high bypass turbofan
Fan = LP compressor
Bypass duct (cold stream)
HP compressor
Combustor
LP turbine drives the fan
The fan is the LP compressor, driven by the rearmost (LP) turbine. Most of the thrust comes from the large, relatively slow bypass stream; the small core needs most of its energy to drive the compressors.
Chapter 14 · Gas Turbine Principles
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
The high bypass turbofan grew out of the low bypass engine, once designers saw that a larger airflow at a lower jet velocity gave far better propulsive efficiency. This one has three spools, like the classic engines of the wide-body era. Air enters the intake and goes straight into the low pressure compressor, which we call the fan. The fan raises its pressure, and then the air splits. Most of it goes down the bypass duct; the rest enters the intermediate and high pressure compressors of the core. The thrust of this engine comes mainly from the fan air, a large mass at a fairly low velocity, which is why it is so efficient. The core is small compared with a turbojet of the same thrust, and most of the energy added in its combustor is needed to drive the compressors. The rearmost turbine, the low pressure turbine, extracts virtually all that remains to drive the fan, leaving only a residual thrust in the hot exhaust.
Part 4 · Efficiency
Propulsive efficiency Propulsive efficiency : how much of the jet's energy becomes useful thrust workηp = 2 ÷ (1 + Vjet ÷ Vaircraft ) The closer the jet speed is to the aircraft speed , the higher it is Same thrust from a large mass, low acceleration : lower turbulence losses, higher efficiency Why bypass air increases mass flow and so increases propulsive efficiency
ηp = 2 ÷ (1 + Vjet ÷ Vaircraft )
1
2
3
4
5
6
0 %
25 %
50 %
75 %
100 %
Jet speed ÷ aircraft speed
propeller 86 %
67 %
pure jet 43 %
The closer the jet speed is to the aircraft speed,
the higher the propulsive efficiency
(but at V jet = V aircraft there is no thrust at all)
Chapter 14 · Gas Turbine Principles
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Propulsive efficiency measures how well the engine turns the energy it gives the jet into useful work pushing the aircraft along. The formula is two divided by one plus the ratio of jet speed to aircraft speed. If the jet leaves only a little faster than the aircraft is flying, the efficiency is high: our propeller example, with a ratio of about one point three, reaches eighty six per cent. If the jet is very much faster than the aircraft, the efficiency falls: our pure jet example, at about three point seven, manages only forty three per cent. So the summary rule is this: the closer the speed of the jet efflux is to the speed of the aircraft, the higher the propulsive efficiency. There is a catch: if the two were equal there would be no thrust at all. That is why we need a large mass of air to make enough thrust with a small velocity increase, and why bypass air, which increases the mass flow, increases propulsive efficiency.
Part 4 · Efficiency
Which engine for which speed? Turboprop : best at low speed, but propeller efficiency falls off above about 350 mph (≈ 300 kt; exams often say 350 kt)Pure turbojet : poor at low speed, best only at very high (supersonic) speed, eventually near 90 %Bypass engines fill the gap: best at airliner cruise speeds Order of best efficiency, low to high speed: turboprop, high bypass, low bypass, pure jet Lower specific fuel consumption for the high bypass engine
Propulsive efficiency vs airspeed
0
100
200
300
400
500
600
0 %
25 %
50 %
75 %
100 %
True airspeed (kt)
airliner cruise
Turboprop
High bypass
Low bypass
Pure turbojet
Best from low to high speed: turboprop → high bypass
→ low bypass → pure jet (only supersonic)
model: η = 2V ÷ (2V + ΔV); propeller tip losses above ≈ 300 kt
Chapter 14 · Gas Turbine Principles
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now compare the engine types across the speed range. The curves come from a simple model, but the pattern is the one you must know. At low airspeeds the turboprop is unbeatable, because the propeller moves a huge mass of air with a small velocity increase. But above roughly three hundred and fifty miles per hour, about three hundred knots, the propeller tips approach the speed of sound and its efficiency falls away quickly. Exam questions often quote this as three hundred and fifty knots. The pure turbojet is poor at low speeds and only comes into its own at very high, supersonic speeds, where its propulsive efficiency can eventually approach ninety per cent. In between, where almost every transport aircraft cruises, the bypass engines fit neatly into the gap. So, from low to high speed, the order of best propulsive efficiency is turboprop, high bypass turbofan, low bypass engine, and finally the pure jet. The high bypass engine also has the lowest specific fuel consumption.
Part 4 · The family
The family at a glance Engine Where the thrust comes from Air through the core Best at Pure turbojet all from the hot jet all of it very high (supersonic) speed Low bypass (1–2 : 1) hot core + bypass, often mixed about half or more fast military jets, early airliners High bypass turbofan (5–12 : 1) mostly the fan / bypass air a small part airliner cruise, M 0.75–0.85 Turboprop propeller via reduction gear + small residual jet all through the core; prop air outside below about 300 kt Turboshaft none: shaft power from a free power turbine all of it helicopters, APUs
Majority of thrust: turbofan → bypass air; turboprop → propeller; turbojet → jet. A turboshaft makes shaft power, not thrust.
Chapter 14 · Gas Turbine Principles
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the whole family side by side. The pure turbojet gets all its thrust from a hot, fast jet, and all its air goes through the core; it is best only at very high speed. The low bypass engine, with a ratio of one or two to one, gets its thrust from the core and the bypass air, which are often mixed; it suits fast military jets and powered the early airliners. The high bypass turbofan, five to twelve to one, gets most of its thrust from the fan and bypass air, and only a small part of the air passes through the core; it is the engine for airliner cruise speeds. The turboprop gets most of its thrust from the propeller, driven through a reduction gear, with only a little residual jet thrust; it is best below about three hundred knots. And the turboshaft makes no useful thrust at all: it delivers shaft power from a free power turbine to a rotor or generator.
Part 4 · Maintenance
Modular construction Big aircraft make travel cheap, but one unserviceable engine can strand hundreds of passengers Engines are built as modules : fan, compressors, HP system, turbines, gearbox A faulty module can be changed without changing the whole engine Less time on the ground, smaller spares holdings, cheaper overhauls It is a maintenance feature, not a weight-saving one, and is used on all modern types
Fan module
IP compressor
Intermediate casing
HP system
IP turbine
LP turbine
External gearbox
Change the faulty module, not the whole engine
Chapter 14 · Gas Turbine Principles
26
e-books by eatpl.in · © 2026 · Do not copy or distribute
Large aircraft have made air travel cheaper and cheaper, but only as long as they keep flying. If one engine on a big airliner becomes unserviceable, the cost of looking after three or four hundred passengers while it is fixed is enormous. So manufacturers build their engines from modules. A three spool turbofan might be split into the fan, the intermediate pressure compressor, the intermediate casing, the high pressure system, the intermediate and low pressure turbines, and the external gearbox. Each module is balanced and tested on its own, so a fault in one of them can be put right by changing that module, without removing and replacing the whole engine. That means less time on the ground, smaller stocks of spare engines and cheaper overhauls. In the exam, remember the purpose: modular construction lets malfunctioning sections be changed without changing the whole engine. It is not about saving weight, and it is not limited to any one type of engine.
Summary
Gas turbine principles in eight lines Reaction Newton's third law. Thrust = ṁ × (Vjet − Vin ). The jet does not push on the air.
Brayton cycle Induction, compression, combustion, exhaust: continuous, combustion at constant pressure.
Limits Turbine entry temperature is limited by the NGVs and turbine blades. Higher pressure ratio, higher efficiency.
Inside Highest pressure at compressor delivery; divergent duct slows and compresses, convergent duct accelerates.
Spools LP turbine drives LP compressor (fan); HP drives HP. Twin spool: less stall and surge.
Turboprop · turboshaft ESHP = shaft + jet thrust. Free power turbine; gas generator.
Bypass BPR = cold ÷ hot flow. High bypass: most thrust from the fan, small core.
Efficiency Large mass, small acceleration. Low to high speed: turboprop, high BPR, low BPR, jet.
Chapter 14 · Gas Turbine Principles
27
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. A gas turbine works by reaction, Newton's third law, and its thrust is the mass flow times the change in velocity; the jet does not push on the air behind. Its Brayton cycle does the same jobs as the Otto cycle but continuously, with combustion at almost constant pressure, so it is light and has a high power to weight ratio. The turbine entry temperature is limited by the nozzle guide vanes and turbine blades, and a higher pressure ratio gives a higher thermal efficiency. Inside, the highest pressure is at compressor delivery; divergent ducts slow and compress the air, convergent ones accelerate it. Spools pair a turbine with a compressor, the low pressure turbine driving the fan. Turboprops are rated in equivalent shaft horsepower, and turboshafts use a free power turbine. Bypass ratio is cold flow divided by hot flow, and for efficiency, a large mass with a small acceleration always wins.