Engines · Chapter 12
Propellers How a spinning wing turns engine power into thrust, and why one fixed blade angle can only be right at one speed.
THRUST every blade section follows a helix β α © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to propellers. A propeller is really a set of small wings that spin, and almost everything about it follows from that one idea. In this lesson you will take a blade apart, name every part of it, and then follow a single blade section along its corkscrew path through the air. You will see why the blade has to be twisted, how thrust and torque arise, which forces try to bend and twist the blade, and why a fixed pitch propeller is only really happy at one speed. We finish with efficiency, the limits on propeller size, reduction gears and the torque meter, ready for the constant speed propeller in the next lesson.
Roadmap
A propeller is a rotating wing Everything in this lesson follows from one idea: each blade section is an aerofoil moving along a helix .
1 · The blade Parts of the blade, blade angle , the helix , angle of attack , twist, pitch and slip, handedness.
2 · Forces Thrust and propeller torque ; centrifugal and bending loads; the CTM and ATM .
3 · Fixed pitch How TAS and RPM set the angle of attack, windmilling, and efficiency .
4 · Driving it Blade numbers and tip speed , reduction gears, the torque meter , variable pitch.
Chapter 12 · Propellers
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the plan. Part one takes the blade apart: its parts, the blade angle, the corkscrew path called the helix, and the angle of attack that results. We will see why the blade is twisted and what is meant by geometric pitch, effective pitch and slip. Part two looks at the forces: thrust, propeller torque, the loads that stretch and bend the blade, and the two twisting moments that try to turn it in its hub. Part three shows how a fixed pitch propeller behaves as the airspeed and R P M change, what windmilling is, and how efficiency is defined. Part four is about driving the propeller: why we add blades instead of making them longer, how reduction gears work, how a torque meter measures power, and why we want the pitch to be variable.
Part 1 · Purpose
Turning engine power into thrust The propeller converts engine shaft power into propulsive thrust It accelerates a large mass of air rearwards by a fairly small amount Newton's third law: the reaction to pushing air back drives the aircraft forward Thrust = mass flow × velocity increase : 150 kg/s × 20 m/s = 3 000 N Each blade is an aerofoil : a rotating wing with root, tip, leading and trailing edges THRUST air in at TAS air out faster: V + ΔV propeller disc slipstream Thrust = mass flow × velocity increase 150 kg/s × 20 m/s = 3 000 N a big mass of air, gently accelerated
Chapter 12 · Propellers
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The job of a propeller is to convert the shaft power of the engine into thrust. It does that by taking hold of a large mass of air and accelerating it rearwards, by a fairly modest amount compared with a jet engine. Newton's third law does the rest: pushing the air backwards produces an equal and opposite reaction that pushes the propeller, and the aircraft, forwards. So thrust equals the mass of air handled each second times the increase in its speed. For example, one hundred and fifty kilograms of air a second, speeded up by twenty metres per second, gives three thousand newtons of thrust. In the model you can see the slipstream leaving the disc. Each blade does its work exactly as a wing makes lift. It is an aerofoil, with a root and a tip, a leading edge and a trailing edge, and a cambered section.
Part 1 · The blade
Parts of a propeller blade Hub on the propeller shaft carries two or more bladesBack : the cambered side, facing forward. Face : the flatter thrust face, facing aftShank : the round root section; butt : the base inside the hub, where any pitch change mechanism attachesChord line : from the centre of the leading edge radius to the trailing edgeBlade stations are measured from the hub centre ; the reference is usually 75% of the radiushub butt shank tip leading edge trailing edge rotation 25% 50% 75% 100% 0 blade stations, measured from the hub centre Section at 75% radius chord line BACK: cambered side, faces forward FACE: flatter thrust face, faces aft LE TE direction of flight
Chapter 12 · Propellers
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us name the parts. The blades are fixed to a central hub, which is mounted on the propeller shaft. Like a wing, each blade has a root and a tip, a leading edge and a trailing edge, and a cambered section. Look at the section at the bottom of the drawing. The cambered side, which faces forward, is called the back of the blade. The flatter side, which faces rearwards towards the pilot, is called the face, or thrust face. Near the hub the section becomes round; that round part is the shank. The very base of the blade, inside the hub, is the butt, and that is where any pitch change mechanism must attach. The chord line runs from the centre of the leading edge radius to the trailing edge. Positions along the blade, called stations, are measured from the centre of the hub, and the usual reference station is seventy five per cent of the radius.
Part 1 · Blade angle
Blade angle: fine and coarse pitch Blade angle (pitch angle): between the chord line and the plane of rotation It is a fixed fact of how the blade sits in the hub; quoted at a reference station Small blade angle = fine pitch : a small bite each turn, like a low gearLarge blade angle = coarse pitch : a big bite each turn, like a high gearTrap: it is not measured from the relative airflow or the aircraft axis plane of rotation β direction of flight Blade angle β chord line to plane of rotation chord line β FINE β 12° β COARSE β 45°
Chapter 12 · Propellers
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
The blade angle, also called the pitch angle, is the angle between the chord line of a blade section and the plane of rotation. The plane of rotation is the flat disc the propeller sweeps, at right angles to the propeller shaft. Because the angle changes along the blade, it is always quoted at a reference station, usually seventy five per cent of the radius. Watch the blades in the model turn in the hub. When the angle is large we call it coarse pitch: each turn takes a big bite of air, like a high gear on a bicycle. When the angle is small we call it fine pitch: a small bite each turn, like a low gear. Here is the classic exam trap. Blade angle is measured from the plane of rotation, not from the relative airflow and not from the aircraft's axis. The angle to the relative airflow is something different: the angle of attack.
Part 1 · The helix
Every section follows a helix Rotation plus forward speed: each section travels along a helix The relative airflow meets the section along that path Helix angle φ : between the path and the plane of rotation; tan φ = TAS ÷ rotational speed1.9 m prop, 2 400 RPM, 75% station: 179 m/s ; at 100 kt (51 m/s) φ = 16° More TAS or less RPM → a steeper helix (larger φ) flight advance per turn tip path: a helix 179 m/s rotation 51 m/s TAS φ Helix angle φ tan φ = TAS ÷ rotational speed 1.9 m prop, 75% station, 2 400 RPM: 2π × 0.71 m × 40 rev/s = 179 m/s 100 kt = 51 m/s φ = 16° (more TAS or less RPM → larger φ)
Chapter 12 · Propellers
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
A blade section does not simply go round in a circle. While it rotates, the aircraft carries it forward, so it actually travels along a corkscrew path called a helix. In the model, the yellow line is the path of a blade tip as the aircraft flies to the left. The air meets the blade section along that path, so the relative airflow comes from the direction of the helix. The helix angle is the angle between the path and the plane of rotation, and its tangent is the forward speed divided by the rotational speed of the section. Take our example propeller: one point nine metres across, at two thousand four hundred R P M. At the seventy five per cent station the section moves round at about one hundred and seventy nine metres per second. At one hundred knots, which is fifty one metres per second, the helix angle is about sixteen degrees. More airspeed, or fewer R P M, makes the helix steeper.
Part 1 · Angle of attack
Angle of attack = blade angle − helix angle Angle of attack α : between the chord line and the relative airflow So α = β − φ : blade angle minus helix angle The blade is set so that the leading edge meets the air at a small α, ideally 2–4° Example: β 21.5°, φ 17.5° at 110 kt, 2 400 RPM → α 4° α, not β, decides the thrust and the propeller torque plane of rotation β relative airflow α direction of flight α = β − φ = 21.5° − 17.5° = 4° 110 kt, 2 400 RPM, 75% station: about the best angle (2–4°)
Chapter 12 · Propellers
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now we can find the angle of attack of a blade section. It is the angle between the chord line and the relative airflow. Since the blade angle is measured from the plane of rotation, and the relative airflow arrives at the helix angle from that same plane, the angle of attack is simply the blade angle minus the helix angle. On the right of the model is the velocity triangle. The orange arrow is the rotational speed, set by the R P M; the blue arrow is the true airspeed; and their sum is the blade path. On the left, the section shows the blade angle in green and the angle of attack in yellow. With a blade angle of twenty one and a half degrees, at one hundred and ten knots and two thousand four hundred R P M, the helix angle is seventeen and a half degrees, leaving about four degrees. That is close to the ideal of two to four degrees for best lift to drag.
Part 1 · Twist
Why the blade is twisted Section speed rises with radius: 48 m/s at 20% but 239 m/s at the tip With one blade angle, the tips would work far harder: uneven thrust and big bending loads So the blade angle decreases from root to tip This keeps the angle of attack about the same (and acceptable) all along the blade Here: β about 54° at 20% falling to 17° at the tip, for α 4° at 110 kt 0.2 0.4 0.6 0.8 1.0 0° 10° 20° 30° 40° 50° 60° blade station (fraction of tip radius) angle (degrees) blade angle β helix angle φ α ≈ 4° all along the blade Section speed at 2 400 RPM (1.9 m): 48 m/s at 20% → 239 m/s at the tip β for α 4° at 110 kt: 54° (20%), 29° (50%), 21.5° (75%), 17° (tip) so the blade angle must fall from root to tip
Chapter 12 · Propellers
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why is a propeller blade twisted? Every section of the blade turns at the same R P M, but the further out it is, the faster it moves. On our example propeller, a section at twenty per cent of the radius moves at about forty eight metres per second; the tip, at about two hundred and thirty nine. The forward speed is the same for all of them, so the helix angle is large near the root and small near the tip. If the whole blade had one blade angle, the tips would meet the air at a big angle of attack and the roots at a small or negative one. The tips would do nearly all the work, with large bending loads. So the blade angle is made to fall from root to tip, here from about fifty four degrees to about seventeen. The result, the shaded gap, is a fairly constant, acceptable angle of attack along the whole blade, and a more even spread of thrust.
Part 1 · Pitch and slip
Geometric pitch, effective pitch and slip Geometric pitch : the distance the blade would advance in one turn if it moved along its chord, like a screw in woodEffective pitch : the distance it actually advances in one turn (TAS ÷ rev/s)Slip : geometric minus effective pitch; it is there because α is not zeroExample: geometric 1.76 m , effective 1.41 m at 110 kt, slip 0.35 m Exam: geometric pitch is a distance ; blade angle is an angle One turn of the 75% station, unrolled circumference 2π r = 4.48 m geometric pitch 1.76 m effective pitch 1.41 m slip 0.35 m β 21.5° φ Geometric pitch : advance per turn if the blade moved along its chordEffective pitch : the advance it really makes, TAS ÷ rev/sSlip : the difference; it exists because α is not zero110 kt = 56.6 m/s ÷ 40 rev/s = 1.41 m per turn
Chapter 12 · Propellers
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pitch is also used as a distance. Imagine one turn of the seventy five per cent station unrolled into a triangle. The base is the distance round the circle, about four point four eight metres. If the blade moved forward along its chord, like a screw in wood, it would rise one point seven six metres in that turn. That is the geometric pitch. In real flight at one hundred and ten knots the propeller actually advances fifty six point six metres per second divided by forty revolutions per second, which is one point four one metres per turn. That is the effective pitch. The difference, here about thirty five centimetres, is called slip. Slip is not waste; it exists because the blade must meet the air at a positive angle of attack to make thrust. The exam point is simple: geometric pitch is a distance travelled in one revolution, while blade angle is an angle.
Part 1 · Handedness
Right-hand and left-hand propellers Direction of rotation is always judged from behind , looking forward from the cockpit Right-hand propeller: turns clockwise seen from behindLeft-hand propeller: turns anticlockwise seen from behindNothing to do with which engine it is on, or whether it pulls or pushes The aircraft reacts the opposite way: a right-hand propeller tends to roll the aircraft left Both propellers seen from BEHIND (from the cockpit) Right-hand clockwise Left-hand anticlockwise Torque reaction turns the aircraft the other way: a right-hand propeller tends to roll the aircraft to the left
Chapter 12 · Propellers
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Propellers are described as right-handed or left-handed, and the convention is to look from behind, from the pilot's seat looking forward. A right-hand propeller turns clockwise when seen from behind. A left-hand propeller turns anticlockwise. That is all the term means. It has nothing to do with which wing the engine is on, and nothing to do with whether the propeller is a tractor or a pusher. Some twins use one of each so that their effects cancel. Remember too that the engine turns the propeller one way, so the propeller turns the aircraft the other way. A right-hand propeller therefore tends to roll the aircraft to the left. We will meet this torque reaction again, together with slipstream and gyroscopic effects, in the next lesson.
Part 2 · Forces
Total reaction: thrust and propeller torque Each section makes lift and drag; their sum is the total reaction Resolve it along the propeller shaft : thrust , forward Resolve it in the plane of rotation : a force opposing rotation That force × radius = propeller torque , a moment about the crankshaft (shaft) axis Steady RPM when propeller torque = engine torque lift drag total reaction THRUST torque force (resists rotation) blade moves direction of flight Torque force × radius, summed over all blades = propeller torque steady RPM: propeller torque = engine torque
Chapter 12 · Propellers
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Each blade section makes lift and drag, just like a wing, and together they form the total reaction. We resolve that total reaction in two directions that matter for a propeller. Along the propeller shaft, pointing forward, is the thrust. In the plane of rotation is a force that opposes the rotation of the blade. Multiply that force by its distance from the axis, add it up over all the blades, and you have the propeller torque: a turning moment about the axis of the crankshaft, which the engine must overcome. When the propeller torque equals the engine torque, the R P M is steady. If the engine torque is greater, the R P M rises; if the propeller torque is greater, it falls. Keep that balance in mind, because it is exactly what the constant speed unit manages in the next lesson.
Part 2 · Loads on the blade
Stretching, bending and vibration Centrifugal force : pure tension, pulling the blade out of the hub; a 10 kg blade at 2 400 RPM: about 220 kN The greatest stress is at the root , which carries the pull of the whole blade Thrust bending : tips bend forward Torque bending : tips bend back , against the direction of rotationAvoid ranges of RPM keep the propeller away from resonance and fatigueSeen from the side centrifugal force: tension thrust bends the tips forward flight greatest stress at the ROOT Seen from the front rotation torque bends the tips back avoid range (example) RPM resonance → blade fatigue
Chapter 12 · Propellers
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
A spinning blade carries some very large loads. The biggest is centrifugal force, which tries to pull the blade out of its hub. It is pure tension. For a ten kilogram blade with its centre of mass thirty five centimetres from the axis, at two thousand four hundred R P M, it comes to about two hundred and twenty kilonewtons, the weight of more than twenty tonnes. The root carries the pull of the whole blade, so the greatest stress is at the root. Thrust acts forward on the blade, so it bends the tips forward. Torque force acts against the rotation, so it bends the tips backwards in the plane of rotation. Finally, vibration. At certain R P M the blades can resonate, which leads to fatigue cracks. Where that happens, the tachometer carries a marked avoid range, and you must not run the engine continuously inside it.
Part 2 · Twisting moments
CTM and ATM: what turns the blade in its hub Centrifugal twisting moment (CTM) : turns the blade towards fine pitch ; always present and the strongerAerodynamic twisting moment (ATM) : the centre of pressure is ahead of the pitch axis, so it turns the blade towards coarse When windmilling the total reaction reverses and the ATM turns the blade towards fine So the CTM opposes the ATM in normal flight, but assists it when windmilling Counterweights on the blade roots use centrifugal force to turn the blades towards coarse Centrifugal twisting moment (CTM): towards FINE plane of rotation blade mass ahead of and behind the pitch axis is pulled towards the plane of rotation → blade angle DECREASES always present; the stronger of the two moments Aerodynamic twisting moment (ATM) centre of pressure ahead of the pitch axis Normal (thrust) towards COARSE Windmilling towards FINE
Chapter 12 · Propellers
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Two moments try to twist each blade about its own long axis, the pitch change axis. The first is the centrifugal twisting moment. The mass of the blade ahead of and behind that axis is flung outwards, and the components of that force pull the chord into the plane of rotation, so the C T M always tends to turn the blade towards fine pitch. It is the stronger of the two. The second is the aerodynamic twisting moment. In normal flight the total reaction acts through a centre of pressure ahead of the pitch axis, so it twists the leading edge forward, towards coarse pitch. When the propeller is windmilling the total reaction reverses, and the A T M then also acts towards fine. So the two moments oppose each other in normal flight, but act together when windmilling. Some propellers have counterweights on the blade roots, arranged so that centrifugal force on them turns the blades towards coarse.
Part 3 · Fixed pitch
Fixed pitch: more TAS, less angle of attack A fixed pitch blade gets its relative airflow from TAS and RPM together Same RPM, more TAS : the helix steepens and α falls β 21.5° at 2 400 RPM: α 21.5° at rest, 11.7° at 60 kt, 4° at 110 kt, −0.4° at 140 kt Take-off: blade too coarse for the low speed, α large, inner sections near the stall As speed builds, α falls towards its best value, propeller torque falls and RPM rises 0 40 80 120 160 -5° 0° 5° 10° 15° 20° TAS (kt) at a steady 2 400 RPM angle of attack at 75% R brakes on: 21.5° 60 kt: 11.7° cruise: 4° 140 kt: −0.4° inner sections stall negative α: drag, then windmilling Fixed β 21.5°: only one TAS (here 110 kt) gives the best α more TAS → bigger helix angle → smaller α
Chapter 12 · Propellers
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
A fixed pitch propeller cannot change its blade angle, so its angle of attack is set by the true airspeed and the R P M together. Hold the R P M at two thousand four hundred and watch the airspeed change in the model. At the start of the take-off run the airspeed is low, the helix is flat, and the angle of attack is large: the blade is too coarse for this speed, and its inner sections are close to the stall. As the aircraft accelerates, the forward speed arrow grows and the angle of attack falls: about twelve degrees at sixty knots, then four degrees in the cruise at one hundred and ten knots, which is what this blade was designed for. Go faster still and at one hundred and forty knots it is slightly negative. During the take-off run, the falling angle of attack reduces the propeller torque, so the R P M creeps up as the propeller reaches a more efficient angle.
Part 3 · Fixed pitch
Fixed pitch: more RPM, more angle of attack Same TAS, more RPM : the rotational speed grows, the helix flattens and α rises At 100 kt: 3.3° at 2 100 RPM, 5.5° at 2 400, 7.2° at 2 700 Pull up into a climb without adding power: TAS falls, α increases α depends on both forward speed and engine speed RPM itself depends on the throttle and the TAS 1 500 1 800 2 100 2 400 2 700 -4° -2° 0° 2° 4° 6° 8° 10° RPM at a steady 100 kt TAS angle of attack at 75% R 2 100: 3.3° 2 400: 5.5° 2 700: 7.2° more RPM → flatter helix → larger α α depends on BOTH forward speed and RPM
Chapter 12 · Propellers
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now hold the true airspeed at one hundred knots and change the R P M instead. At low R P M the blade moves round slowly, so its path is steep and the angle of attack is small. Increase the R P M and the rotational arrow grows, the path flattens, and the angle of attack rises. Increase it further and it rises further still. With our propeller at one hundred knots, two thousand one hundred R P M gives about three degrees, two thousand four hundred gives five and a half, and two thousand seven hundred gives about seven. Put the last two slides together and you have the exam answer: the angle of attack of a fixed pitch propeller depends on both forward speed and engine speed. So if you raise the nose into a climb without adding power, the airspeed falls and the angle of attack increases, and if the R P M also goes up, it increases even more.
Part 3 · Fixed pitch
One blade angle through a whole flight The same fixed propeller (β 21.5° at 75% R). Its pitch is chosen for the cruise , so it is a compromise everywhere else.
Phase TAS and RPM Angle of attack Result Static, full throttle zero TAS very large Inner sections stalled: may not reach rated RPM Take-off run low, rising large, falling Blade too coarse ; RPM rises as α improves Climb low TAS large Poor efficiency, RPM low Cruise design TAS about 4° Optimum : highest efficiencyFast dive, throttle open high TAS small or negative Torque falls, engine may overspeed : close the throttle Glide, engine idling TAS drives the prop negative Windmilling : drag, engine turned by the airflow
A climb propeller has a finer pitch (good take-off, overspeeds in the cruise); a cruise propeller has a coarser pitch (fast cruise, long take-off).
Chapter 12 · Propellers
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us follow one fixed blade angle through a flight. Its pitch was chosen to give the best angle of attack in the cruise, so everywhere else it is a compromise. Standing still at full throttle, the blades meet the air at a very large angle, the inner sections stall, the torque is high, and the engine may not even reach its rated R P M. On the take-off run the blade is too coarse for the low speed; as speed builds, the angle of attack falls towards a more efficient value and the R P M rises. In the climb the airspeed is low again and efficiency suffers. In the cruise everything is right. In a fast dive with the throttle open, the angle of attack becomes very small, the propeller torque falls and the engine can overspeed, so you must close the throttle. Gliding at idle, the angle of attack is negative and the propeller windmills.
Part 3 · Windmilling
Windmilling: the airflow drives the propeller At high TAS, low power or fine pitch, the helix angle exceeds the blade angle: α negative The total reaction points rearwards : the propeller gives drag , not thrust Its component in the plane of rotation now drives the blades round The propeller turns the engine in its normal direction A windmilling propeller gives more drag than a stopped one; this is why multi-engine propellers can be feathered β α direction of flight total reaction DRAG (negative thrust) pushes the blade round its circle α = β − φ = 10° − 22° = −12° The airflow now turns the propeller, and the propeller turns the engine in its NORMAL direction, while giving drag
Chapter 12 · Propellers
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Windmilling is what happens when the airflow, rather than the engine, drives the propeller. If the helix angle becomes larger than the blade angle, which happens at high airspeed, at low power or with a fine blade angle, the angle of attack goes negative. Watch the model as the airspeed increases: the yellow angle of attack swings below zero. The total reaction now points backwards, so the propeller produces drag instead of thrust, and its component in the plane of rotation pushes the blades round in their normal direction. So a windmilling propeller turns the engine in its normal direction of rotation, while giving drag. That drag is large, larger than the drag of a stationary propeller, because the windmilling disc is extracting energy from the airflow. On a multi-engine aircraft with a failed engine that is a serious problem, and the cure, feathering, is a major part of the next lesson.
Part 3 · Efficiency
Propeller efficiency 0 40 80 120 160 200 0% 20% 40% 60% 80% 100% TAS (kt) propeller efficiency fine (climb) pitch cruise pitch coarse pitch variable pitch: the best of every blade angle Propeller efficiency η = thrust power ÷ shaft power (THP ÷ BHP) × 100% Worked example Thrust 3 000 N at 60 m/s (117 kt) Thrust power = 3 000 × 60 = 180 kW Engine shaft power = 220 kW η = 180 ÷ 220 = 82% Typical best: 80 to 90% Zero at rest (no work done) and at zero thrust Each fixed blade angle is efficient at only one combination of TAS and RPM . Variable pitch keeps the propeller near its peak over the whole speed range.
Chapter 12 · Propellers
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Propeller efficiency is the useful thrust power divided by the shaft power the engine delivers, times one hundred per cent. Thrust power is thrust times true airspeed. In the worked example, three thousand newtons of thrust at sixty metres per second is one hundred and eighty kilowatts. If the engine delivers two hundred and twenty kilowatts to the shaft, the efficiency is about eighty two per cent. Good propellers reach eighty to ninety per cent at best. Now look at the graph, which is computed for three fixed blade angles. Each curve starts at zero, because at rest no useful work is done, rises to a peak, and falls to zero again at the speed where the blade gives no thrust. A fine pitch peaks at low speed, a coarse pitch at high speed. So a fixed pitch propeller is efficient at one combination of airspeed and R P M only. A variable pitch propeller can follow the dashed envelope, staying near the peak all the way.
Part 4 · Absorbing power
More blades, not longer blades More power needs more blade area : longer, wider, or more blades Diameter is limited by tip speed and ground clearance Example tip: 239 m/s rotating, 246 m/s helical with 60 m/s TAS = Mach 0.72 Near Mach 1 the tips suffer shock waves , noise, lost thrust and flutter So the commonest reason for more blades is to increase power absorption Ways to absorb more power 2 blades 3 blades 4 blades same diameter, more solidity: more power absorbed Why not just a bigger diameter? Tip speed 1.9 m at 2 400 RPM: tip rotational speed π × 1.9 × 40 = 239 m/s add 60 m/s TAS: helical tip speed √(239² + 60²) = 246 m/s 246 ÷ 340 m/s = Mach 0.72 at sea level Near Mach 1: shock waves, noise, lost thrust, flutter Also: ground clearance. A reduction gear lets a big propeller turn slowly while the engine turns fast
Chapter 12 · Propellers
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
As engines become more powerful, the propeller has to absorb more power. It can do that with longer blades, wider blades, a larger blade angle, or more blades. Longer blades soon run into two limits: ground clearance, and tip speed. The tip moves round fastest and also moves forward with the aircraft, so its true speed is the combination of the two. On our one point nine metre propeller at two thousand four hundred R P M, the tip turns at two hundred and thirty nine metres per second, and with sixty metres per second of airspeed its helical speed is about two hundred and forty six. That is already Mach nought point seven two at sea level. Close to Mach one the tips form shock waves, become very noisy, lose thrust and may flutter. So the most common reason for fitting more blades to a propeller is to increase its power absorption without increasing its diameter.
Part 4 · Reduction gearing
Reduction gears: a big propeller, turning slowly A large propeller must turn slower than a powerful engine, to keep its tips below sonic speed and avoid flutter A reduction gear sits between the crankshaft and the propeller shaft Spur gear : parallel, offset shafts; simple and cheap but bulky at the front of the engineEpicyclic gear : sun, planets, fixed ring; compact and on one centre line Its helical teeth or ring reaction give a force proportional to torque , used to measure it Spur (parallel) reduction gear crankshaft propeller shaft axes parallel but OFFSET simple and cheap, but bulky at the front of the engine here 50 : 100 → prop at ½ Epicyclic (planetary) reduction gear sun gear: driven by the crankshaft planets roll round the FIXED ring planet carrier drives the propeller all on ONE centre line: compact helical teeth give end thrust or ring reaction ∝ torque → torque meter here sun 1 : ring 2 → prop at ⅓
Chapter 12 · Propellers
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
A powerful engine needs a large propeller to turn its power into thrust efficiently, but a large propeller turning at full engine speed would have supersonic tips and could suffer flutter. The answer is a reduction gear between the crankshaft and the propeller shaft, so the propeller turns more slowly than the engine. The simplest type is the spur gear: a small pinion on the crankshaft drives a larger gear on the propeller shaft. In the drawing, fifty to one hundred, the propeller turns at half engine speed. It is simple and cheap, but the shafts are offset and it is bulky at the front of the engine. The epicyclic gear is more compact. The crankshaft drives a central sun gear, the planet gears roll around a fixed outer ring, and the planet carrier drives the propeller, all on one centre line. Here the propeller turns at one third of engine speed. Its ring reaction is also proportional to the torque passing through.
Part 4 · Torque meter
The torque meter: measuring the power Tells the pilot how much power is being used; reads in torque (lb ft, N m), BHP or per cent Oil pressure type : the floating ring gear (or helical planet end thrust) pushes pistons into oil cylindersMore torque closes a bleed port , so the torque meter oil pressure rises in proportion Electronic type : measures the twist of a drive shaft, which is proportional to the power transmittedThe electronic type is lighter and more reliable ring gear free to float reaction tries to turn the ring piston bleed port to drain pump torque gauge More torque → ring pushes the piston in → bleed port closes → oil pressure rises to balance it: pressure ∝ torque
Chapter 12 · Propellers
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
The torque meter tells the pilot how much power the engine is delivering in every phase of flight. It may read in torque units such as pound feet or newton metres, in brake horsepower, or as a percentage. The common mechanical type uses the reduction gear. When the engine drives the planets round, the reaction tries to turn the ring gear backwards. The ring is allowed to float a little, and its movement is resisted by pistons in cylinders fed with oil from a torque meter pump. One piston partly covers a bleed port. At low power the port is wide open. As torque increases, the ring pushes the pistons further in, the bleed port closes down, and the oil pressure rises until it balances the ring. So the torque meter oil pressure is proportional to the propeller torque. The modern alternative is electronic: it senses the small twist of a drive shaft, which is proportional to the power transmitted. It is lighter and more reliable.
Part 4 · Variable pitch
Why we want the pitch to change A fixed pitch is right at only one TAS and RPM Piston power is set by manifold pressure and RPM ; with a variable pitch propeller the pilot can set them separately Fine pitch for take-off and climb: high RPM, full power, good thrust at low speedCoarse pitch for cruise: lower RPM, high efficiency, less wear and fuelA constant speed unit then adjusts the pitch to hold the selected RPM Fixed pitch one blade angle, set when made Ground adjustable reset on the ground only Two-position fine for take-off, coarse for cruise Variable (controllable) pilot sets any angle in flight Constant speed governor holds the selected RPM
Chapter 12 · Propellers
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
We have seen that a fixed pitch propeller is efficient at only one combination of airspeed and R P M. The power of a piston engine depends on two things, manifold pressure and R P M, and with a fixed pitch propeller you cannot set them independently. If the pitch can change, you can. Designers went through several stages: ground adjustable blades, then two-position propellers, then pitch that the pilot could vary in flight, and finally the constant speed propeller. Watch the model. For take-off and climb, a fine pitch lets the engine reach full R P M and full power, giving good thrust at low speed. For the cruise the blades move to a coarser angle, the R P M comes down and the efficiency goes up, with less wear and less fuel. In a constant speed propeller, a governor does this automatically, changing the pitch to hold whatever R P M the pilot selects. That is the subject of the next lesson.
Summary
Propellers: what to take into the exam Blade angle Chord to plane of rotation ; decreases root to tip (twist) to keep α acceptable.
Angle of attack α = β − φ; chord to relative airflow; best about 2–4°.
Pitch Geometric : advance per turn at β; effective : actual advance; difference = slip .
Hand Right-hand = clockwise from behind . Torque reaction rolls the aircraft the other way.
Forces Thrust bends tips forward ; torque bends them back ; CF tension, worst at the root .
Twisting CTM → fine ; ATM → coarse , but → fine when windmilling.
Fixed pitch α up with RPM, down with TAS; too coarse at take-off; best only in the cruise .
Efficiency THP ÷ BHP , 80–90%; more blades to absorb power; reduction gear for big props.
Chapter 12 · Propellers
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us gather it up. The blade angle is measured from the chord to the plane of rotation, and it decreases from root to tip so that the angle of attack stays acceptable all along the blade. The angle of attack is the blade angle minus the helix angle, ideally two to four degrees. Geometric pitch is how far the blade would advance in one turn at its blade angle, effective pitch is how far it really goes, and the difference is slip. A right-hand propeller turns clockwise seen from behind. Thrust bends the tips forward, torque bends them back, and centrifugal tension is greatest at the root. The C T M turns the blades fine, the A T M coarse except when windmilling. A fixed pitch propeller is too coarse for take-off and right only in the cruise. Efficiency is thrust power over shaft power, eighty to ninety per cent at best.