General Navigation · Chapter 6
TAS and Altitude Conversions
The navigation computer’s airspeed, compressibility, altitude and density altitude windows.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 6 uses the navigation computer for airspeed and altitude: the airspeed indicator corrections, CAS to TAS by correcting density error, compressibility correction above 300 knots, TAS from Mach number, true altitude from indicated altitude and temperature, and density altitude.
Chapter roadmap
What this chapter covers
01
ASI corrections IAS → CAS → TAS, and when compressibility matters.
02
CAS to TAS Density error, solved in the airspeed window.
03
Compressibility and Mach Above 300 kt TAS; TAS from Mach number.
04
Altitudes True altitude and density altitude.
Chapter 6 · TAS and Altitude
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four parts: the airspeed indicator corrections and their order; CAS to TAS, correcting density error in the airspeed window; compressibility correction and TAS from Mach number; and true altitude and density altitude. Then the practice tables and the TAS Lab.
01
ASI corrections
IAS, CAS, TAS: in that order.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: the corrections to the airspeed indicator.
The order of corrections
IAS → CAS → TAS
IAS : what the dial showsInstrument and position (pressure) errors: one correction card → CAS (older term RAS) Density error → TAS : always do this first TAS above 300 kt : then correct compressibility too
From the instrument to true airspeed IAS indicated air speed read on the dial CAS calibrated (RAS) instr. + position error TAS true air speed density error: computer Above 300 kt TAS also correct compressibility (strictly, CAS → EAS → TAS) below 300 kt it is insignificant: ignore it 40 80 120 160 200 240 KNOTS IAS 112 kt ASI correction card 100 +2 110 +3 120 +3 130 +4 IAS 112 + 3 = CAS 115 Density error the ASI is calibrated for ISA sea level: 1225 g/m³ CAS = TAS × √(ρ/ρ₀) at FL100, −5 °C: 115 → 135 TAS > CAS when the air is thin
Chapter 6 · TAS and Altitude
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
What you see on the instrument is indicated airspeed. Instrument error and pressure, or position, error are applied, in practice from a single correction card beside the instrument, to give calibrated airspeed, the modern term for rectified airspeed. Strictly, CAS is corrected for compressibility to give equivalent airspeed and then for density to give TAS; but an airline pilot rarely meets EAS. Always correct density error first to get TAS; if that TAS is 300 knots or less, you have finished; above 300 knots, apply compressibility correction as well.
02
CAS to TAS
Density error, from pressure and temperature.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: CAS to TAS, the density error correction.
Density error in 3D
Thin air: same CAS, higher TAS
The ASI measures dynamic pressure: ½ρV² Calibrated for ISA sea level: 1225 g/m³ At FL200 ISA: 653 g/m³ , relative density 0.533 TAS = CAS ÷ √σ = 100 ÷ 0.730 = 136 kt
Chapter 6 · TAS and Altitude
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
To correct CAS to TAS we divide by the square root of the relative density, relative to ISA at mean sea level, 1225 grams per cubic metre. At 100 knots CAS at FL200 in ISA, the density is 653 grams per cubic metre, relative density 0.5331, whose square root is 0.7301, so the TAS is 136 knots. There is no flight deck instrument for density, but pressure from the altimeter and temperature from the thermometer give it through the gas laws, and that is exactly what the navigation computer does.
The ISA standard atmosphere
Density from pressure and temperature
FL Temp °C Pressure hPa Density g/m³ ft per hPa 00 +15 1013.25 1225 27 50 +5 843 1056 32 100 −5 697 905 37 150 −15 572 771 43 200 −25 466 653 51 250 −35 376 549 61
Worked: 100 kt CAS at FL200, ISA Relative density = 653 ÷ 1225 = 0.5331
√0.5331 = 0.7301
TAS = 100 ÷ 0.7301 = 136 kt
Gas law P ∝ ρ T : so density comes from pressure (altimeter) and temperature (thermometer, SAT).
Chapter 6 · TAS and Altitude
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
The table gives the ISA standard atmosphere: temperature falling 2 degrees per thousand feet from plus 15, pressure from 1013.25 hectopascals, density from 1225 grams per cubic metre, and the number of feet per hectopascal rising with height. At FL200 in ISA the density is 653, a relative density of 0.5331, whose square root is 0.7301, so 100 knots CAS is 136 knots TAS. Because pressure is proportional to density times temperature, the altimeter’s pressure and the thermometer’s temperature are enough to find density.
The AIR SPEED window
Set pressure altitude against temperature
In the AIR SPEED window set pressure altitude against SAT The inner disc now sits in the ratio √σ against the outer Find CAS on the inner scale Read TAS on the outer scale FL200, −25 °C: 100 kt → 136 kt · 18,000 ft, −30 °C: 170 kt → 220 kt
10 11 12 13 14 15 16 17 18 19 20 25 30 35 40 45 50 60 70 80 90 10 11 12 13 14 15 16 17 18 19 20 25 30 35 40 45 50 60 70 80 90 CAS 10 AIR SPEED window -60 -50 -40 -30 -20 -10 0 +10 -20 -10 0 10 20 30 40 50 60 °C ×1000 ft FL200 against −25 °C · 100 kt CAS → 136 kt TAS 18,000 ft against −30 °C · 170 kt CAS → 220 kt TAS
Chapter 6 · TAS and Altitude
08
E-books by eatpl.in · © 2026 · Do not copy or distribute
On the navigation computer the AIR SPEED window shows pressure altitude against temperature. Set FL200 against minus 25 degrees. This turns the inner scale against the outer in the ratio of the square root of the relative density: against the 10 on the outer scale you would read 0.7301 on the inner. Now CAS on the inner scale sits against TAS on the outer: 100 knots CAS is 136 knots TAS. Second example: 18,000 feet against minus 30, and 170 knots CAS on the inner scale gives 220 knots TAS on the outer.
03
Compressibility and Mach
Above 300 kt, and from Mach number.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: compressibility correction and TAS from Mach number.
Compressibility correction
Only when TAS is over 300 kt
The ASI allows for compressibility only at ISA sea level density Insignificant below 300 kt TAS Find TAS first; if over 300: (TAS ÷ 100) − 3 divisions Move the COMP CORR index left , then read TAS again
Compressibility: FL350, −47 °C, CAS 280 kt 1 Density first: FL350 against −47 °C CAS 280 → TAS 500 kt 1 2 Over 300 kt: correct compressibility (TAS ÷ 100) − 3 = 500/100 − 3 = 2 2 3 COMP CORR window: index 2 divisions left moves the inner scale 3 4 Read again against 280 kt CAS corrected TAS 480 kt 4 COMP CORR window TAS/100 − 3 = DIV 2 div TAS against 280 kt CAS 500 kt density only 480 kt density + compressibility compressibility makes the ASI over-read: TAS falls
Chapter 6 · TAS and Altitude
10
E-books by eatpl.in · © 2026 · Do not copy or distribute
The ASI is calibrated to allow for compressibility at ISA sea level density, but at any other density compressibility error must be corrected. It is insignificant below 300 knots TAS, but must be applied if the first calculation gives more than 300. Example: FL350, minus 47, CAS 280 knots. Set FL350 against minus 47 and read 500 knots TAS against 280 CAS. That is over 300, so work out the TAS divided by 100 minus 3: 500 over 100 minus 3 is 2. In the COMP CORR window move the arrow 2 divisions to the left, then read 480 knots TAS against 280 knots CAS.
TAS from Mach number
One variable: temperature
TAS = Mach × 38.95 × √T (T in kelvin, °C + 273)Example: M 0.82 at −47 °C: 480 kt Computer: turn to the Mach index , set SAT against it, read TAS against Mach No pressure altitude, no compressibility correction
TAS from Mach number: only temperature matters TAS = M × 38.95 × √T T in kelvin (°A) = °C + 273 −47 °C = 226 K · √226 = 15.03 0.82 × 38.95 × 15.03 = 480 kt computer: −47 against the Mach index → 482 -60 -40 -20 0 20 400 440 480 520 560 M 0.82 480 kt at −47 °C SAT °C → (same Mach: warmer air, higher TAS) Why easier than CAS? Speed of sound depends only on temperature: a = 38.95 √T knots no pressure altitude needed, no compressibility correction computer: SAT against the Mach index
Chapter 6 · TAS and Altitude
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
Finding TAS from Mach number is easier than from CAS: there is only one variable, temperature, and no compressibility correction. The formula is TAS equals Mach number times 38.95 times the square root of the absolute temperature, where absolute zero is minus 273 degrees Celsius. At minus 47, 226 kelvin, Mach 0.82 gives 0.82 times 38.95 times 15.03, which is 480 knots. On the computer, turn the airspeed window to the Mach number index, set minus 47 against it, and read 482 knots on the outer scale against 0.82 on the inner.
04
Altitudes
True altitude and density altitude.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part four: true altitude and density altitude.
True altitude in 3D
Cold air: lower than you think
The altimeter measures pressure , calibrated to ISA Cold air is denser: pressure falls faster with height The 466 hPa level (20,000 ft indicated) sinks ISA −10 °C : 20,000 ft indicated = 19,200 ft true
Chapter 6 · TAS and Altitude
13
E-books by eatpl.in · © 2026 · Do not copy or distribute
The altimeter is calibrated against the ISA atmosphere. If the temperatures on the day differ from ISA, the indication will not be the true altitude. High up this does not matter for separation, because everyone has the same error, but close to the ground the true altitude matters for terrain clearance. Cold air is denser, so pressure falls more rapidly with height: you pass through the hectopascals needed to indicate 20,000 feet in less than 20,000 true feet.
True altitude
Correct the altimeter for temperature
Assumes the other errors corrected and the right QNH set True = Ind + ISA dev × 4/1000 × Ind Colder than ISA: true altitude lower Computer ALTITUDE window: use SAT directly; always use it for true altitude
True altitude: 20,000 ft indicated, SAT −35 °C True = Ind + (ISA dev × 4/1000 × Ind) ISA at FL200 = −25 °C → SAT −35 = ISA −10 −10 × 4/1000 × 20,000 = −800 ft True altitude = 20,000 − 800 = 19,200 ft 1/273 per °C ≈ 1/250 = 4/1000: the “4% rule” 20,000 ISA 19,200 ISA −10 indicated Computer: ALTITUDE window set 20,000 ft against −35 °C (SAT directly) read true altitude on the outer scale against indicated altitude on the inner → 19,200 ft · no ISA deviation needed
Chapter 6 · TAS and Altitude
14
E-books by eatpl.in · © 2026 · Do not copy or distribute
With the other altimeter errors corrected and the correct QNH set, the indicated altitude differs from true altitude by temperature error. The formula: true altitude equals indicated altitude plus ISA deviation over 273 times indicated; treating 1/273 as 1/250 gives 4 over 1000, the basis of the 4 percent rule. Indicated 20,000 feet at minus 35, ISA minus 10: true altitude is 20,000 minus 800, 19,200 feet. On the computer, in the ALTITUDE window, align 20,000 feet with minus 35 and read 19,200 on the outer scale against 20,000 on the inner. Use the computer for true altitude questions: it uses the actual temperature directly.
Density altitude
Hot and high: the aircraft performs as if higher
The ISA altitude with the same density as the air you are in Affects aircraft performance and engine power DA = PA + (ISA dev × 120) Computer: AIR SPEED window setting, read the DENSITY ALTITUDE window
Density altitude: Nairobi, pressure altitude 5,500 ft, +35 °C DA = PA + (ISA dev × 120) ISA at 5,500 ft = +4 °C → +35 is ISA +31 +31 × 120 = +3,720 ft DA = 5,500 + 3,720 = 9,220 ft (strictly 118.8 ft per °C; 120 is close enough) Computer: AIR SPEED window, then DENSITY ALT set 5,500 ft against +35 °C read DENSITY ALTITUDE: 9,200 ft small divisions: for close exam options the formula may be more accurate take-off run ISA sea level: short run density altitude 9,200 ft: much longer Not a height: a performance measure the ISA altitude with the same density as the air you are in hot and high → thin air → less lift and thrust → longer take-off
Chapter 6 · TAS and Altitude
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
Density altitude has nothing to do with vertical distance: it is the altitude in the ISA atmosphere with the same density as the air you are in, and it governs aircraft performance and engine power. The formula: density altitude equals pressure altitude plus ISA deviation times 120, strictly 118.8. At Nairobi, pressure altitude 5,500 feet and plus 35, ISA is plus 4, so the deviation is plus 31 and the density altitude 5,500 plus 3,720, 9,220 feet. On the computer, set 5,500 feet against plus 35 in the airspeed window and read 9,200 feet in the density altitude window; its divisions are small, so the formula can be more accurate for close exam options.
Summary
TAS and altitudes on the computer
Problem Method IAS → CAS instrument + position error: correction card CAS → TAS AIR SPEED window: pressure altitude against SAT; CAS inner, TAS outer (TAS = CAS ÷ √σ) TAS > 300 kt compressibility: (TAS ÷ 100) − 3 divisions left in COMP CORR, read again Mach → TAS TAS = M × 38.95 × √(°C + 273); or SAT against the Mach index True altitude ALTITUDE window: indicated altitude against SAT; or Ind + dev × 4/1000 × Ind Density altitude DENSITY ALT window after the AIR SPEED setting; or PA + dev × 120
Chapter 6 · TAS and Altitude
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
In summary: IAS to CAS from the correction card; CAS to TAS in the airspeed window with pressure altitude against temperature; above 300 knots TAS a compressibility correction of TAS over 100 minus 3 divisions; TAS from Mach with the formula or the Mach index; true altitude in the altitude window; and density altitude in the density altitude window or with the 120 feet per degree formula.
Questions · CAS to TAS
Complete the table
# CAS kt Pressure alt ft SAT °C TAS kt 1 140 10,000 -10 ? 2 175 8,000 +5 ? 3 220 15,000 -22 ? 4 300 30,000 -40 ? 5 180 12,500 -25 ? 6 165 9,000 +7 ? 7 163 11,000 +10 ? 8 295 31,000 -53 ? 9 160 12,000 -10 ? 10 260 35,000 -45 ?
Chapter 6 · TAS and Altitude
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
The first table: find TAS from CAS, pressure altitude and SAT. Remember compressibility for TAS over 300 knots.
Questions · Mach and true altitude
Complete the tables
Mach SAT °C TAS kt .82 −50 ? .66 ? 375 ? −38 425 .77 −60 ? .92 ? 580 ? −47 415
Ind alt ft SAT °C True alt ft 10,000 -20 ? 18,000 -30 ? 6,000 +10 ? 27,000 -50 ? 21,500 -35 ? 8,000 +10 ?
Chapter 6 · TAS and Altitude
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
The second and third tables: Mach number, SAT and TAS, finding the missing one; and true altitude from indicated altitude and SAT.
Questions · Density altitude
Complete the table
Pressure alt ft SAT °C Density alt: computer Density alt: formula 10,000 +15 ? ? 6,000 +20 ? ? 27,000 -40 ? ? 23,000 -22 ? ? 25,000 -45 ? ? 29,000 -38 ? ?
Chapter 6 · TAS and Altitude
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
The fourth table: density altitude by the computer and by the formula.
Answers · CAS to TAS
Answers (computer readings)
# CAS PA SAT TAS Note 1 140 10,000 -10 162 2 175 8,000 +5 200 3 220 15,000 -22 273 4 300 30,000 -40 472 with comp. corr. 5 180 12,500 -25 212 6 165 9,000 +7 193 7 163 11,000 +10 199 8 295 31,000 -53 465 with comp. corr. 9 160 12,000 -10 192 10 260 35,000 -45 450 with comp. corr.
Chapter 6 · TAS and Altitude
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers to the first table. Questions 4, 8 and 10 have a first TAS over 300 knots, so they include the compressibility correction.
Answers · Mach, true and density altitude
Answers
Mach SAT TAS .82 −50 477 .66 −60 375 .71 −38 425 .77 −60 438 .92 −11 580 .71 −47 415
Ind SAT True 10,000 -20 9,450 18,000 -30 17,400 6,000 +10 6,150 27,000 -50 25,600 21,500 -35 20,800 8,000 +10 8,350
PA SAT Comp. Formula 10,000 +15 12,500 12,400 6,000 +20 8,200 8,040 27,000 -40 26,300 26,880 23,000 -22 23,600 24,080 25,000 -45 23,100 23,800 29,000 -38 28,900 29,600
Chapter 6 · TAS and Altitude
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers to the Mach, true altitude and density altitude tables; density altitude by computer and by formula can differ by a few hundred feet.
A working airspeed computer: set pressure altitude and SAT CAS to TAS, with compressibility above 300 kt Mach to TAS and back True altitude and density altitude The practice tables, set up one by one Open the TAS Lab →
10 11 12 13 14 15 16 17 18 19 20 25 30 35 40 45 50 60 70 80 90 10 11 12 13 14 15 16 17 18 19 20 25 30 35 40 45 50 60 70 80 90
Chapter 6 · TAS and Altitude
22
E-books by eatpl.in · © 2026 · Do not copy or distribute
The TAS Lab has a working airspeed computer: set pressure altitude and temperature and read TAS from CAS with compressibility correction, convert Mach to TAS, find true altitude and density altitude, and practise the practice tables.
eatpl.in · General Navigation · Chapter 6
TAS Lab
A working airspeed computer. Set pressure altitude and temperature and watch the disc turn; read TAS against CAS, TAS against Mach, or true altitude against indicated.
CAS → TAS
Mach
Altitudes
Practice
Result
Enter the values and press Set up.
The four tables. Set up solves the row on the computer; Answer shows the answer.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.