2240
General Navigation · Chapter 13
Topographical Maps and Map Reading
Relief, elevation figures, check points, the lost procedure and chart symbols.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 13 is about reading a topographical chart: how relief is shown, how maximum elevation figures and safety altitudes are worked out, how to choose and use visual check points, what to do when lost, and the chart symbols.
Chapter roadmap
What this chapter covers
01
Reading the chart Relief, elevation figures, other features and scale.
02
Map reading Map to ground, ground to map, and choosing check points.
03
Hazards and getting lost Visual illusions, the lost procedure and chart symbols.
Chapter 13 · Topographical Maps and Map Reading
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: what a topographical chart shows, how to map read and choose check points, and the hazards, lost procedure and chart symbols. Then practice and the Map Reading Lab.
01
Reading the chart
Relief, other features and scale.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: reading the chart.
Relief
Contours: lines of equal elevation
A contour joins all places at the same elevation above mean sea level. Read the interval from the chart, and check whether it is in feet or metres .
Close together: steep ground Far apart: gentle slope Layer tinting colours the bands between contours
Side view Plan view (the chart) 500 ft 500 1000 ft 1000 1500 ft 1500 2000 ft 2000 close together: steep far apart: gentle Contours join points of equal elevation (AMSL)
Chapter 13 · Topographical Maps and Map Reading
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
Contours are lines joining places at the same elevation above mean sea level. Imagine slicing the hill horizontally every 500 feet: each slice, seen from above, is a contour line on the chart. Where the ground is steep the contours crowd together; where it is gentle they spread out. Always check the contour interval, and whether the chart uses feet or metres.
Relief
Layer tinting, spot elevations and the highest point
Layer tinting A different colour for each elevation band. The key is in the margin.
0–250 250–500 500–1000 1000–2000 2000+
Spot elevations Prominent peaks have their elevation printed beside a dot. The highest spot height on the sheet is in a white box with a black border, and its position is given in the margin.
2240
Both are elevations Contours and layer tints both show elevation : vertical distance above mean sea level.
Chapter 13 · Topographical Maps and Map Reading
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
Layer tinting colours each elevation band, from white near sea level through yellows to browns, with a key in the margin; it is really contours with the gaps coloured in. Spot elevations give the heights of prominent peaks; the highest point on the sheet is printed in a white box with a black border and its position is given in the margin. All of these are elevations above mean sea level.
Elevation figures
Maximum elevation figure and MSA
In each rectangle, take the highest natural feature and the highest man-made obstacle.
Natural feature: add 300 ft (100 m in Europe) for unknown structures Man-made: elevation known, no allowance Take the higher, round up to the next 100 ft: that is the MEF MSA: add 1000 ft (under 5000) or 2000 ft (5000 or more)
½° × ½° rectangle (1:500,000 chart) hill 1268 mast 1432 Hill: 1268 + 300 = 1568 natural: add 300 ft Mast: 1432 man-made: no allowance Higher: 1568 round up → 1600 MSA: 1600 < 5000 add 1000 → 2600 1 6 MEF 16 (= 1600 ft) 1 6 MEF 16 · MSA 26 The MEF is NOT a safety altitude
Chapter 13 · Topographical Maps and Map Reading
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
Government charts such as the CAA, TPC and ONC series show maximum elevation figures; many commercial charts such as Jeppesen show minimum safe altitude, or grid MORA. The working is the same. In each rectangle find the highest natural feature and the highest man-made obstruction. Structures under 300 feet, or 100 metres in continental Europe, need not be notified, so 300 feet is added to natural features; man-made obstructions are known exactly. Take the higher and round up to the next hundred feet. Here the hill of 1268 plus 300 is 1568, higher than the mast at 1432; rounded up, 1600, shown as 16. For a safety altitude add 1000 feet below 5000, or 2000 feet at 5000 or above: 26. The MEF is not a safety altitude.
Elevation figures
Which figure is on your chart?
Chart Shows Rectangle CAA 1:500,000 MEF ½° × ½° TPC 1:500,000 MEF ½° × ½° ONC 1:1,000,000 MEF 1° × 1° Jeppesen MSA / Grid MORA up to 5° × 5°
Notified structures Structures 300 ft AGL or more (UK, US) or 100 m (continental Europe) must be notified. Shorter ones may be unknown, hence the allowance on natural features.
Check which one your chart shows. The difference may, quite literally, be a matter of life and death.
Chapter 13 · Topographical Maps and Map Reading
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
Check which figure your chart shows. CAA charts, TPCs and ONCs show maximum elevation figures, in half-degree rectangles on the 1 to 500,000 charts and whole degrees on the ONC. Jeppesen charts show minimum safe altitude or grid MORA, sometimes in five-degree rectangles. Confusing the two could be fatal.
Other features
Water, woods, roads and railways
Feature Shown as Water (sea, lake, river) Blue Woods Green Roads Red lines Railways Black lines
Before measuring with a navigation ruler, make sure the chart is constant scale .
water: blue woods: green road: red railway: black
Chapter 13 · Topographical Maps and Map Reading
08
E-books by eatpl.in · © 2026 · Do not copy or distribute
Other features follow standard colours: water, whether sea, lake or river, is blue; woods are green; roads are red lines; railways are black lines. An exercise on chart symbols comes at the end of the chapter. When you measure distances with a navigation ruler, be sure the chart is constant scale.
Scale
Three ways to show scale
Statement in words “One inch to ten nautical miles”
= 1 : 729,600
Representative fraction Chart length ÷ earth distance, same units, written 1 : n.
1 : 500,000
1 cm on the chart = 500,000 cm on the Earth.
Graduated scale line A scale bar at the foot of the chart in nm, statute miles or km. The latitude scale is one too:
1° of latitude = 60 nm
Chapter 13 · Topographical Maps and Map Reading
09
E-books by eatpl.in · © 2026 · Do not copy or distribute
Scale is the relationship between a length on the chart and the distance on the Earth. It is given in words, such as one inch to ten nautical miles; as a representative fraction, where the same units top and bottom cancel, so 1 to 500,000 means 1 centimetre represents 500,000 centimetres; or as a graduated scale line. A latitude scale is a graduated line too, since 1 degree of latitude is 60 nautical miles. Chapter 16 covers scale calculations.
02
Map reading
Relating the map to the ground, and choosing check points.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Map reading
Map to ground, or ground to map
Map to ground Read features from the map and look for them ahead. The normal technique when you are near track and on time.
Ground to map See a pattern of features on the ground and find it on the map. Used when you are less sure of your position.
Plan thoroughly and study the route before flight. In flight, stay on track and time, and keep a good lookout.
Map Ground map to ground ground to map on track and on time · unsure of position
Chapter 13 · Topographical Maps and Map Reading
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
Map reading means visualising the ground from the symbols on the map and relating the features to one another. Reading map to ground is the normal technique when you are confident you are near track and on time. Reading ground to map, the reverse, is used when you are less certain: you see an arrangement of features on the ground and find it on the map. Thorough planning and route study make both easier, but do not let navigation crowd out lookout, weather awareness and managing the aircraft.
Visual check points
What makes a good check point
Large Seen from far away. Use part of it for accuracy: the motorway junction, not the whole city.
Unique Cannot be mistaken for another. Many disused airfields together are a trap.
Vertical extent Masts and hills are seen early: and must be identified for safety. Less useful when you fly high.
Contrast Stands out in colour or texture. Changes with season, region and at night.
Every 5 to 10 minutes along the route. A good feature close to track is better than a poor feature on track.
Chapter 13 · Topographical Maps and Map Reading
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
Choose check points every 5 to 10 minutes. The ideal check point is large, unique, has vertical extent and contrasts with its surroundings. Use part of a large feature, such as a motorway junction in a city, for precision. Make sure it cannot be confused with a similar feature nearby. Masts and hills can be seen from a long way off: a mast seen 20 miles away at 120 knots solves the next 10 minutes. Contrast changes with the seasons and at night. A good feature close to track is better than a poor one on track.
Visual check points
Typical check points by day and night
Feature Strengths Watch out for Coastlines Excellent by day; with moonlight at night — Lakes, rivers, canals Show up well Hidden by hills at low level; tree-lined rivers Hills, valleys Isolated hills are best Safety in high ground Towns Lit at night Not below 1500 ft AGL; villages unlit Motorways Line feature day and night; junctions Minor roads less reliable Railways Junctions, stations, bridges Hard near towns; unseen at night Woods Big woods, from above 1000 ft Felling, seasons, snow Power stations, quarries, lighthouses Seen from far; smoke shows wind Several along one river; blasting NOTAMs
Chapter 13 · Topographical Maps and Map Reading
13
E-books by eatpl.in · © 2026 · Do not copy or distribute
Coastlines are excellent by day and usable at night with moonlight. Lakes, rivers and canals show up well, but small water features hide in low ground. Isolated hills are the best terrain features; valleys carry roads and railways. Towns are lit at night but villages are not; never overfly built-up areas below 1500 feet or below a height to glide clear. Motorways are line features day and night with junctions and service stations. Railways give junctions, stations and bridges but are hard to pick out near towns and invisible at night. Use woods with care. Power stations, airfields, quarries and lighthouses are useful but check they are unique.
03
Hazards and getting lost
Visual illusions, the lost procedure and chart symbols.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: hazards, the lost procedure and chart symbols.
Visual navigation hazards
When the eyes are fooled
High latitudes : less detailed charts; terrain changes or vanishes with the seasonWhite-out : snow and uniform cloud, no shadows: no horizon, no height or distanceHill in front of the hill : aiming to clear a far ridge, a nearer one hides in poor contrastSmooth water, snow, desert : height is hard to judge; scrub looks like full-size treesNight : scattered lights below can be confused with the stars
planned level planned clearance much less! the hill in front of the hill Poor contrast over snow: the nearer ridge does not stand out
Chapter 13 · Topographical Maps and Map Reading
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
Some conditions cause visual illusions. In high latitudes charts are less detailed and the terrain changes with the seasons. Over snow and ice under uniform cloud the horizon vanishes; in a white-out, height and distance cannot be judged. In poor contrast you may plan to clear high ground far ahead and miss a nearer ridge: the hill in front of the hill. Over smooth water, snow or desert, height is hard to judge, and small scrub can look like full-size trees. At night, scattered lights below can be mistaken for stars.
Navigation techniques
A disciplined approach
At every start and turning point Correct heading, compass synchronised.
Right altimeter setting, at a safe altitude.
Stopwatch started, or know how early or late you are.
Uncertain of position? Don't carry on regardless. Start resolving it now with every aid.
Check fuel and aircraft systems first: over-concentrating on navigation is common.
Still unsure at a turning point? Turn on ETA.
Chapter 13 · Topographical Maps and Map Reading
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
A disciplined approach works best. At every start and turning point check the heading and that the compass is synchronised, the altimeter setting and a safe altitude, and that the stopwatch is running or you know how early or late you are. If you become uncertain of position, do not carry on regardless: start resolving it at once, but first check fuel and aircraft systems, then follow a lost procedure. If still unsure when due at a turning point, turn on the ETA.
Lost procedure
DR position and the circle of uncertainty
Check compass and ASI: planned heading and speed? Climb if you can, for a wider visual and radio horizon Fix with every aid: VOR/DME, VDF, radar Visual only: work out a DR position from the last fix Draw a circle of uncertainty : radius 10% of the distance since the fix; map read ground to map Still lost: turn for a line feature , follow it to a check point Mind high ground and controlled airspace. 121.5 MHz: PAN call or training fix. Real emergency: squawk 7700.
motorway last fix 1000 DR position circle: 10% of distance Ground to map: look for a big feature inside the circle Still lost? Turn for a line feature and follow it junction: fix!
Chapter 13 · Topographical Maps and Map Reading
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
The lost procedure. Check the compass and airspeed indicator to be sure you are flying the planned heading and speed. If weather and airspace allow, climb for a wider visual and radio horizon. Fix your position with every aid available. If you are limited to map reading, work out a dead reckoning position from the last fix and the track, groundspeed and time since, and draw a circle of uncertainty around it, normally with a radius of 10 percent of the distance flown since the fix. The circle moves along track and grows with time. Map read ground to map; the aircraft should usually be inside the circle. If still in difficulty, turn towards a good line feature outside the circle, such as a coastline, motorway or main railway, and follow it to a definite check point. Watch out for high ground and controlled airspace; 121.5 megahertz gives the emergency fixing service, and in a real emergency squawk 7700.
Chart symbols
Radio aids and obstacles
VOR VOR/DME VORTAC TACAN DME NDB Obstacle unlit Obstacle lit Exceptionally high obstacle, unlit Exceptionally high obstacle, lit Group of obstacles Aeronautical ground light
Chapter 13 · Topographical Maps and Map Reading
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
The symbols most often examined. Radio aids: a hexagon with a dot is a VOR; inside a rectangle it is a VOR/DME; a rectangle alone is a DME; the three-cornered TACAN symbol becomes a VORTAC when the corners are filled; an NDB is a dot ringed with stipple. Obstacles: an inverted V with a dot; a star on top means lit; a taller symbol with a stem is an exceptionally high obstacle, over 1000 feet above ground; two together are a group. A star on its own is an aeronautical ground light. The legend of every chart you use should be second nature.
Summary
What to take into the exam
Relief Contours: close = steep. Layer tints and spot heights are elevations AMSL. Highest point: white box.
MEF and MSA Natural +300 ft, man-made as is, higher, round up. MSA: +1000 (or +2000 from 5000). MEF is not a safety altitude.
Check points Large, unique, vertical extent, contrast. Every 5–10 min. Map to ground; ground to map when unsure.
Lost Fuel and systems first. DR position, circle of 10% of distance, ground to map, then a line feature.
Chapter 13 · Topographical Maps and Map Reading
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four things: how relief is shown; how maximum elevation figures and safety altitudes are built and why the MEF is not a safety altitude; what makes a good check point and the two directions of map reading; and the lost procedure, with its circle of uncertainty of 10 percent of the distance since the last fix.
Practice · Questions 1–4
Lost procedure and the Jeppesen chart
1. Flying VFR, you are uncertain of your position. Best course of action? (a) head for a line feature (b) fly your tracks in reverse until you recognise something (c) fly expanding circles (d) fly the flight plan in reverse to base
2. Chart Sheet A: the symbol for an unlighted obstacle? (a) 9 (b) 10 (c) 12 (d) 15
3. Jeppesen E(LO)1, 5211N 00931W. The symbols are: (a) military airport, ILS, NDB (b) civil airport, VOR, ILS (c) military airport, VOR, ILS (d) civil airport, ILS, NDB
4. Jeppesen E(LO)1, Galway Carnmore 5318.1N 00856.5W: (a) VOR, NDB, DME, compulsory RP (b) civil airport, NDB, DME, non-compulsory RP (c) civil airport, VOR, DME, non-compulsory RP (d) VOR, NDB, DME, non-compulsory RP
Chapter 13 · Topographical Maps and Map Reading
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
Questions 1 to 4 from the end of Chapter 13. Questions 3 and 4 need the Jeppesen E(LO)1 chart.
Practice · Questions 5–8
Chart Sheet A symbols
5. Exceptionally high (over 1000 ft AGL) lighted obstruction? (a) 6 (b) 9 (c) 10 (d) 15
6. The symbol for a VORTAC? (a) 5 (b) 7 (c) 13 (d) 14
7. The symbol for a VOR? (a) 4 (b) 5 (c) 13 (d) 14
8. Symbol 3 represents: (a) lit obstacle (b) lighthouse (c) VRP (d) aeronautical ground light
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Chapter 13 · Topographical Maps and Map Reading
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
Questions 5 to 8 use the numbered symbols of Chart Sheet A, redrawn here.
Practice · Answers
Answers and reasons
Q Answer Why 1 a Head for a line feature 2 d · 15 Inverted V, no star 3 d Civil airport, ILS, NDB 4 b Civil airport, NDB, DME, non-compulsory RP
Q Answer Why 5 c · 10 Tall stem with a star 6 d · 14 TACAN shape, filled corners 7 c · 13 Hexagon with a dot 8 d Aeronautical ground light
Chapter 13 · Topographical Maps and Map Reading
22
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers: 1 a, 2 d, 3 d, 4 b, 5 c, 6 d, 7 c, 8 d.
Try it yourself
Map Reading Lab
Maximum elevation figure and MSA from any hill and mast DR position and circle of uncertainty, flown out on a map Chart symbol flashcards with a score All 8 practice questions, one tap each Open the Map Reading Lab →
1 6
Chapter 13 · Topographical Maps and Map Reading
23
E-books by eatpl.in · © 2026 · Do not copy or distribute
The Map Reading Lab works out maximum elevation figures and safety altitudes, flies a DR position with its circle of uncertainty, has chart symbol flashcards, and sets up all eight practice questions.
eatpl.in · General Navigation · Chapter 13
Map Reading Lab
Maximum elevation figures and safety altitudes, the DR position and circle of uncertainty, and chart symbols.
MEF / MSA
Lost
Symbols
Practice
Which symbol is this?
0 / 0
Show all Next symbol
The questions from the end of Chapter 13. Set up shows the question on the lab; Answer shows the answer. Questions 3 and 4 need the Jeppesen E(LO)1 chart.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.