General Navigation · Chapter 14
Convergency and Conversion Angle
Why great circle tracks change direction en route, and how to convert between great circle and rhumb line tracks.
© 2026 eatpl.in. All rights reserved. These slides are for the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
This deck covers Chapter 14 of the General Navigation course: convergency and conversion angle. The colour code runs through every diagram: orange is always the great circle, blue is always the rhumb line. On the globe here, both lines join the same two points on one parallel. The rhumb line follows the parallel; the great circle bows towards the pole.
Chapter roadmap
What this chapter covers
01
Convergency
Why meridians lean towards each other, how much they lean at any latitude, and why a great circle track changes direction.
02
Conversion angle
The angle between the great circle and the rhumb line joining the same two points, and where to apply it.
03
Practice
Six worked exam-style examples, then ten practice questions with answers.
Chapter 14 · Convergency and Conversion Angle
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts. First convergency: the geometry of meridians and why a great circle track keeps changing. Second conversion angle: the link between great circle and rhumb line tracks. Third, practice in the exam style.
01
Convergency
The angle of inclination between two meridians, and what it does to a great circle track.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: convergency, also called earth convergence.
Introduction
Meridians converge towards the nearer pole
Meridians are great semicircles joining the poles. Here, two of them are 60° of longitude apart.
Watch the orange tangents. At the equator they are parallel. At 30°N they lean together. At the pole they meet at the full 60°, the change of longitude.
N Equator: convergency 0° 30°N: convergency 30° Pole: convergency 60°
Chapter 14 · Convergency and Conversion Angle
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
Because every meridian is a great semicircle from pole to pole, any two of them run parallel where they cross the equator and close up towards each pole. The animation follows the tangents to two meridians 60 degrees of longitude apart. At the equator the tangents are parallel: convergency zero. Moving up to 30 north they lean towards each other: convergency is 60 times sine 30, which is 30 degrees. At the pole they meet at an angle equal to the change of longitude, 60 degrees. The globe is drawn in perspective, so the angles on screen are close to, but not exactly, 30 and 60; the labels give the true values. In a PDF or PowerPoint export the picture shows the 30 north position.
Two meridians 60° of longitude apart
How much they converge depends on latitude
0°
At the equator
The meridians are parallel. Convergency is zero.
30°
At 30°N
Somewhere between: more than 0°, less than the 60° change of longitude.
Pole
60°
At the pole
The angle equals the change of longitude: 60° here.
Chapter 14 · Convergency and Conversion Angle
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
Take two meridians 60 degrees of longitude apart. At the equator they are parallel, so the angle between them is zero. At the pole, looking straight down, a full turn is 360 degrees and so is the full range of longitude, so the angle between them at the pole is exactly the change of longitude: 60 degrees. At any latitude in between, the angle is somewhere between the two. At 30 degrees north it is 30 degrees, as the next slide shows.
Definition
Convergency is the angle between two meridians at a given latitude
Position Latitude Ch long Convergency Conv ÷ ch long
Equator 0° 60° 0° 0
Intermediate 30° 60° 30° 0.5
Pole 90° 60° 60° 1.0
The ratio runs from 0 at the equator to 1 at the pole, exactly like the sine of latitude: sin 0° = 0, sin 30° = 0.5, sin 90° = 1.
Chapter 14 · Convergency and Conversion Angle
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
Convergency, also called earth convergence, is defined as the angle of inclination between two selected meridians measured at a given latitude. The table gives the equator and the pole; the middle row is added here to show the pattern. Divide convergency by the change of longitude and you get 0 at the equator and 1 at the pole. That is the behaviour of the sine of the latitude, which gives us the formula on the next slide.
The formula
Convergency = ch long × sin lat
Example: two meridians 40° apart, at 30°N
40° × sin 30° = 40° × 0.5 = 20°
Chapter 14 · Convergency and Conversion Angle
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
Convergency equals the change of longitude times the sine of the latitude. In the example the change of longitude is 40 degrees and the latitude is 30 degrees north. Draw tangents to each meridian at 30 north, and the angle between them is 40 times 0.5, which is 20 degrees. This works for two meridians at the same latitude. Next: why a pilot should care.
Why it matters to a pilot
True North changes as you cross meridians
True North is the direction of the local meridian. Fly to a different meridian and your local True North has turned by the convergency between the two.
Rhumb line
Cuts every meridian at the same angle, so on the Earth it has to curve continuously.
Great circle
Cuts each meridian at a different angle. Its track changes by exactly the convergency between them.
On the flight deck
INS, GPS and FMCs all steer great circle tracks, so the track you see keeps changing en route.
Chapter 14 · Convergency and Conversion Angle
08
E-books by eatpl.in · © 2026 · Do not copy or distribute
True North is defined by the local meridian. Once you are on a different meridian from where you started, your True North has a different direction. A rhumb line cuts all meridians at the same angle, and since the meridians are at different angles to each other, the rhumb line must curve all the time. A great circle does not curve on the Earth, so its track angle measured from the meridians changes as it goes, by exactly the convergency. Inertial navigation systems, GPS and flight management computers all compute steering along great circle tracks.
a
b
c
X
Y
N
Convergency and the great circle
Track change = convergency
The great circle crosses X at track a and Y at track b . The change, b − a , is the convergency c between the two meridians.
Unless the route runs due east or west, X and Y are crossed at different latitudes, so use the mean latitude.
Convergency = ch long × sin mean lat
Chapter 14 · Convergency and Conversion Angle
09
E-books by eatpl.in · © 2026 · Do not copy or distribute
Here a great circle cuts two meridians, X and Y, which converge towards the north. The track at X is angle a; at Y it is angle b. The dashed line through Y is drawn parallel to meridian X, and the angle between it and meridian Y is the convergency, c. The great circle's track has changed by b minus a, which equals the convergency. On any track other than due east or due west, the great circle crosses the two meridians at different latitudes, so there is no single latitude to use. Instead use the mean latitude, also called the mid latitude, which is the same thing when there are only two points. So: convergency equals change of longitude times sine of the mean latitude.
Direction of change
Increase or decrease? D‑I‑I‑D
Westbound
Eastbound
Northern hemisphere
Southern hemisphere
Read the boxes left to right, top to bottom: D, I, I, D . The great circle always bows towards the nearer pole.
N S 063° 075° 090° 105° 117° Northern hemisphere, eastbound: track increases I 297° 285° 270° 255° 243° Northern hemisphere, westbound: track decreases D 117° 105° 090° 075° 063° Southern hemisphere, eastbound: track decreases D 243° 255° 270° 285° 297° Southern hemisphere, westbound: track increases I great circle track
Chapter 14 · Convergency and Conversion Angle
10
E-books by eatpl.in · © 2026 · Do not copy or distribute
Knowing the size of the change is half the job; you also need its direction. The animation flies a great circle between two points 90 degrees of longitude apart on 30 north, then on 30 south, eastbound and then westbound. Watch the track readout in the top corner. Northern hemisphere eastbound: about 063 rising to about 117, an increase. Northern hemisphere westbound: about 297 falling to about 243, a decrease. Southern hemisphere eastbound: about 117 falling to about 063, a decrease. Southern hemisphere westbound: about 243 rising to about 297, an increase. That gives D-I-I-D reading the grid left to right, top to bottom. The reason is that the great circle always bows towards the nearer pole, shown against the blue dashed rhumb line along the parallel. Example from worked example 1: eastbound at 45 north, a track of 060 at A becomes 068.5 at B. In a PDF or PowerPoint export the picture shows the first case, northern hemisphere eastbound.
Worked example 1 · Set-up
Start with a sketch
The initial great circle track from A (40°N 002°W) to B (50°N 010°E) is 060°(T). What is the initial great circle track from B to A?
Draw two meridians converging towards the nearer pole: north, here.
Draw the 060° track from the left-hand meridian, so it reaches the other one. That point is A.
Check the sense: B is north of A (50°N vs 40°N) and east of it (010°E vs 002°W).
060°
A
40°N 002°W
B
50°N 010°E
N
Chapter 14 · Convergency and Conversion Angle
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
This is question 1. Always start with a sketch: it is not to scale, it just gets the geometry into your head. We are in the northern hemisphere, so draw two meridians converging northwards. The 060 degree track must start from the left-hand meridian; drawn from the right-hand one it would go off the diagram. So the left point is A and the right point is B. Then check the sense against the positions: B should be north and east of A, and it is. B's longitude is 010 degrees east, a change of longitude of 12 degrees.
Worked example 1 · Solution
Calculate, then use either definition
Convergency
Ch long: 002°W to 010°E = 12°
Mean lat: (40 + 50) ÷ 2 = 45°N
12 × sin 45° = 12 × 0.7071 = 8.5°
Method 1: track change
Eastbound in the northern hemisphere, so the track increases.
060° + 8.5° = 068.5°
That is the track at B, going away from A.
Method 2: parallel meridian
Draw A's meridian again through B. Angle N = 060° (corresponding angles); angle M = 8.5°.
M + N = 068.5°
Track from B back to A is the reciprocal:
248.5°(T)
Chapter 14 · Convergency and Conversion Angle
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
Convergency first: change of longitude 12 degrees, mean latitude 45 north, sine 45 is 0.7071, so convergency is 8.5 degrees. Then two ways to finish, depending on which definition you prefer. Method one treats convergency as the change in great circle track: eastbound in the northern hemisphere the track increases (D-I-I-D), so it passes B on 068.5. Method two treats convergency as the angle between the meridians: draw a line through B parallel to A's meridian. Angle N is 060 by corresponding angles, angle M between that line and B's meridian is 8.5, so the track at B measured from B's True North is 068.5. Either way, the great circle bearing of A from B, measured at B, is the reciprocal: 248.5 degrees true.
Worked example 2
Working backwards from the track change
The initial great circle track from C (36°N 015°E) to D (latitude 42°N) is 300°(T); the final track at D is 295°(T). (a) What is the longitude of D? (b) What is the approximate great circle track at 011°E?
(a) Longitude of D
Track changed 300° → 295°, so convergency = 5°. Mean lat = 39°N.
ch long = 5 ÷ sin 39° ≈ 8°
D is west of C (track 300°): 015°E − 8° = 007°E
(b) Track at 011°E
011°E is halfway between 015°E and 007°E, so the track is halfway between 300° and 295°.
≈ 297.5°(T)
Chapter 14 · Convergency and Conversion Angle
13
E-books by eatpl.in · © 2026 · Do not copy or distribute
Here the formula runs backwards. The track has changed from 300 to 295, so the convergency is 5 degrees. C is at 36 north and D at 42 north, so the mean latitude is 39 north. Five equals change of longitude times sine 39, which is about 0.63, giving a change of longitude of about 8 degrees. A track of 300 heads north-west, so D is west of C, at 007 east. Part b: 011 east is halfway in longitude between C and D, and convergency is proportional to change of longitude, so the track there is halfway between 300 and 295: approximately 297.5 true. This is a westbound northern hemisphere case, and the track decreased, consistent with D-I-I-D.
H
40°S 170°W
G
45°S 174°E
250°
S
Worked example 3 · Southern hemisphere
Across the 180° meridian
The initial great circle track from H (40°S 170°W) to G (45°S 174°E) is 250°(T). What is the initial great circle track from G to H?
Ch long across 180°: 10° + 6° = 16°
Convergency = 16 × sin 42.5° = 10.8°
Westbound, southern hemisphere: track increases to 260.8° at G
Reciprocal at G:
080.8°(T)
Chapter 14 · Convergency and Conversion Angle
14
E-books by eatpl.in · © 2026 · Do not copy or distribute
Southern hemisphere this time, so the meridians converge southwards. The 250 track has to start from the right-hand meridian to reach the other, so H is on the right and G on the left. Check: G is south of H, which matches 45 south against 40 south. H is at 170 west and G at 174 east, so we cross the 180 degree meridian: that is why west appears on the right of the diagram here. It looks odd but it is correct. Change of longitude across 180: 10 degrees to the antimeridian plus 6 degrees beyond it, 16 degrees. Mean latitude 42.5 south. Convergency is 16 times sine 42.5, about 10.8. Westbound in the southern hemisphere the track increases, so it is 260.8 at G, and the reciprocal, the track from G back to H, is 080.8 true. With the parallel-meridian method: the reciprocal from the construction line is 070, plus 10.8 of convergency gives 080.8.
02
Conversion angle
The angle between the great circle and the rhumb line joining the same two points.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: conversion angle.
A (30°N 020°W) to B (30°N 020°E)
Two routes between the same two points
A
B
080°
090°
100°
Rhumb line: 090° all the way
020°W
000°
020°E
Convergency between A and B:
40 × sin 30° = 20°
The picture is symmetrical about 000°, where the great circle runs 090°. So it leaves A on 080° and reaches B on 100° : 10° either side of the rhumb line.
Chapter 14 · Convergency and Conversion Angle
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
The sketch is drawn Mercator style, with the meridians parallel, even though on the Earth they converge. That makes it easy to see that the rhumb line keeps a constant direction while the great circle does not. Both lines join A at 30 north 020 west and B at 30 north 020 east, 40 degrees of longitude apart. The rhumb line is the parallel of 30 north, so it is 090 true everywhere. The great circle changes direction by the convergency: 40 times sine 30, 20 degrees. The figure is symmetrical about 000, where the great circle is momentarily parallel to the rhumb line at 090. So the great circle leaves A on 080 and passes B on 100.
Definition
Conversion angle is the difference between the great circle direction and the rhumb line direction joining two given points.
Conversion angle = ½ convergency= ½ ch long × sin mean lat
It is the same at both ends: 10° at A and 10° at B in the last example.
The great circle always lies on the polar side of the rhumb line.
Chapter 14 · Convergency and Conversion Angle
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
Formal definition: conversion angle is the difference between great circle direction and rhumb line direction joining two given points. In the example it was 10 degrees: at A, 080 against 090; at B, 100 against 090. It is always the same at both ends, which is why it is exactly half the convergency. So conversion angle equals half the change of longitude times the sine of the mean latitude. And on the globe the great circle always runs nearer the pole than the rhumb line, which tells you which way to apply it.
Same route, two kinds of chart
On every chart, the great circle lies nearer the pole
A
B
N
Parallel meridians (Mercator style)
The rhumb line is straight; the great circle curves towards the pole.
A
B
N
Converging meridians
The great circle looks straight; the rhumb line curves away from the pole.
Chapter 14 · Convergency and Conversion Angle
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
The same situation can be drawn either way. With parallel meridians, as on a Mercator chart, the rhumb line is straight and the great circle curves. With converging meridians, the great circle appears as a straight line even though its track angle is changing, and the rhumb line appears as a curve even though it keeps a constant true direction. On both, the great circle runs nearer the pole, exactly as on the globe. Orange is the great circle, blue the rhumb line, as throughout the deck.
Worked example 4
Two points on the same parallel
J (58°12'N 004°W) and K (58°12'N 006°E). Find (a) the convergency, (b) the rhumb line track J to K, (c) the initial great circle track K to J.
Part Working Answer
(a) Ch long 10° × sin 58.2° (0.85) 8.5°
(b) Same latitude, so the rhumb line follows the parallel 090°(T)
(c) Conversion angle 4.25°; K to J is westbound with the great circle on the polar side, so 270° + 4.25° 274.25°(T)
Chapter 14 · Convergency and Conversion Angle
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
J and K are both on 58 degrees 12 minutes north, 10 degrees of longitude apart. Part a: convergency is 10 times sine 58.2, about 0.85, which is 8.5 degrees. Part b: on the same latitude the rhumb line is the parallel itself, so 090 true from J to K. Part c: conversion angle is half the convergency, 4.25 degrees. From K to J the rhumb line is 270. The great circle lies on the polar side, so heading west it leaves K pointing a little north of west: 270 plus 4.25, which is 274.25 true.
Worked example 5 · INS waypoints along 53°08'N
What happens to the track at WP2?
086°
094°
086°
094°
8° left
Rhumb line 090°
WP1
030°W
WP2
020°W
WP3
010°W
CA = ½ × 10 × sin 53°08' = ½ × 10 × 0.8 = 4°
Each leg runs 086° → 094°, then resets: answer (d), an 8° decrease
Chapter 14 · Convergency and Conversion Angle
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
Question 5. Three waypoints are loaded into an inertial navigation system, all on 53 degrees 08 north, at 030 west, 020 west and 010 west, and the autopilot follows the route. What is the track change passing WP2? Options: an 8 degree increase, a 4 degree decrease, zero, or an 8 degree decrease. The rhumb line all the way is 090, but the INS flies a great circle on each leg. Each leg is 10 degrees of longitude at 53 degrees 08, sine about 0.8, so the conversion angle is 4 degrees. Each leg starts on 086 and ends on 094: eastbound in the northern hemisphere the track increases, as D-I-I-D says. But at WP2 the INS changes over to the next leg and goes back to 086. So passing WP2 the track drops from 094 to 086: an 8 degree left turn. Answer d.
Worked example 6
From great circle track to rhumb line track
A is 55°N 000°; B is 54°N 010°E. The initial great circle track from A to B is 100°(T). What is the rhumb line track at A?
(a) 096° (b) 107° (c) 104° (d) 100°
CA = ½ × 10 × sin 54.5° ≈ 4°
Northern hemisphere: the great circle leaves A on the polar side, so the rhumb line is 4° to the right of it.
100° + 4° = 104°(T) , answer (c)
Rule: apply the conversion angle at the position where the great circle direction is measured.
Chapter 14 · Convergency and Conversion Angle
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
Question 6. A is 55 north on the Greenwich meridian, B is 54 north 010 east, and the initial great circle track from A to B is 100 true. The change of longitude is 10 degrees, the mean latitude 54.5, sine about 0.8, so the conversion angle is about 4 degrees. One rule matters here: apply the conversion angle at the position where the great circle direction is measured. The great circle track is measured at A, so we apply 4 degrees at A. In the northern hemisphere the great circle is on the polar side, so heading roughly east it leaves A pointing further north than the rhumb line: the rhumb line is 104 true. Answer c. Where this is going: radio waves travel along great circles, so a radio bearing is a great circle direction. To plot it on a Mercator chart you apply conversion angle to get a rhumb line direction. That is covered in the Mercator chart chapter.
Summary
What to take into the exam
Convergency
ch long × sin mean lat
The angle between two meridians, and the change in great circle track between them.
Conversion angle
½ × ch long × sin mean lat
Great circle minus rhumb line direction; the same at both ends.
Direction
D‑I‑I‑D: northern hemisphere eastbound increases, westbound decreases; southern the reverse. The great circle always lies on the polar side.
Method
Sketch the converging meridians, check the sense, calculate, then apply at the point where the track is measured.
Chapter 14 · Convergency and Conversion Angle
22
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four things to remember. Convergency equals change of longitude times sine mean latitude; it is both the angle between the meridians and the change in great circle track. Conversion angle is half of that; it is the difference between the great circle and the rhumb line directions and is the same at both ends. For direction, use D-I-I-D, and remember the great circle always lies on the polar side of the rhumb line. And the method: sketch first, check the sense against the positions, calculate, and apply the angle at the right point.
Practice · Questions 1–5
Try these: sketch first
1. M and N are in the southern hemisphere; the convergency of their meridians is 12°. The rhumb line track M to N is 249°(T). Find the great circle track (a) M to N, (b) N to M.
2. From A (30°S 165°E), the great circle bearing of B (also at 30°S) is 100°(T). Find (a) the great circle track B to A, (b) the longitude of B.
3. The rhumb line from D (30°N 179°W) to C is 090°(T); the initial great circle track C to D is 287°(T). Find (a) the great circle track D to C, (b) the approximate position of C.
4. The great circle track A to B is 227°(T) at A and 225°(T) at B. What is the convergency, and which hemisphere are A and B in?
5. (a) At what latitude is the convergency between two meridians twice its value at 20°N? (b) Is there a latitude where it is three times the value at 20°N?
Chapter 14 · Convergency and Conversion Angle
23
E-books by eatpl.in · © 2026 · Do not copy or distribute
Practice questions 1 to 5 from the end of the chapter, lightly reworded. Answers are on slide 25. Encourage a sketch for every one, and a sense check against the positions before calculating.
Practice · Questions 6–10
Try these: check the sense
6. (a) A and B share a hemisphere. Initial great circle B to A is 268°(T); A to B is 092°(T). Which hemisphere, and what is the rhumb line track A to B? (b) C and D share a hemisphere. Initial great circle C to D is 063°(T); rhumb line D to C is 240°(T). Which hemisphere, and what is the approximate initial great circle track D to C?
7. X is 64°S 011°50'W, Y is 64°S 005°10'W. Find (a) the convergency, (b) the approximate initial great circle track Y to X, (c) the rhumb line track X to Y.
8. A is 55°30'N 004°35'W, B is 64°00'N 022°37'W. (a) Find the convergency. (b) If the rhumb line A to B is 313°(T), what is the approximate initial great circle track B to A?
9. Initial great circle B to A is 245°(T); rhumb line A to B is 060°(T). Mean latitude is 53° and B is at 002°15'E. What is the longitude of A?
10. A and B are in the southern hemisphere; the convergency of their meridians is 8°. Initial great circle A to B is 094°(T) and B is at 23°00'S 020°00'W. What is the position of A?
Chapter 14 · Convergency and Conversion Angle
24
E-books by eatpl.in · © 2026 · Do not copy or distribute
Practice questions 6 to 10, lightly reworded. Question 6b asks for the great circle track from C to D.
Practice · Answers
Answers
Q Answer
1 (a) 243°(T) (b) 075°(T)
2 (a) 260°(T) (b) 155°W
3 (a) 073°(T) (b) 30°N 111°W
4 2°, northern hemisphere
5 (a) 43°N (b) No: a sine cannot exceed 1
Q Answer
6 (a) Southern; 090°(T) (b) Southern; 237°(T)
7 (a) 6° (b) 267°(T) (c) 090°(T)
8 (a) 15.5°, call it 16° (b) 125°(T)
9 010°15'W
10 23°00'S 040°30'W (rhumb line 090°)
Chapter 14 · Convergency and Conversion Angle
25
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers. Question 5: sin 20 is 0.342; twice that is 0.684, the sine of about 43 degrees. Three times would be 1.026, and no latitude has a sine greater than 1. Question 6a: equal and opposite initial tracks either side of 090 and 270 mean both points are on the same latitude, so the rhumb line is 090; the tracks show the great circle bending south, so southern hemisphere.
Solve it on the globe
Convergency Lab
Enter waypoints A and B to plot the great circle and rhumb line on a 3D Earth
Get convergency, conversion angle and every track, with the working
Work backwards from a track change to ch long or latitude
All ten practice questions from slides 23 and 24, ready to plot and solve
Open the Convergency Lab →
A
B
Chapter 14 · Convergency and Conversion Angle
26
E-books by eatpl.in · © 2026 · Do not copy or distribute
Open the Convergency Lab to work through the practice questions on a 3D globe. Type in any two waypoints and it plots the great circle in orange and the rhumb line in blue, highlights the meridians through A and B, and shows the convergency, conversion angle, rhumb line track and great circle tracks, both by the exam formula and the exact spherical value. The Work backwards tab finds change of longitude or latitude from a convergency, which is what questions 9 and 10 need. The Questions tab has questions 6 to 10 ready to plot, each with full working.