0 1 2 3 4 0 10 20 30 40 50 60 nm 1 : 500,000
General Navigation · Chapter 16
Scale
Chart length and earth distance: words, scale lines and representative fractions.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 16 is about scale: the relationship between a length on a chart and the distance it represents on the Earth. It covers the three ways scale is shown, converting between them, the calculations, and what large and small scale mean.
Chapter roadmap
What this chapter covers
01
Expressing scale Words, graduated scale lines and the representative fraction.
02
Scale calculations RF = chart length ÷ earth distance: find any one from the other two.
03
Large and small Large scale: lots of detail. Small scale: lots of area.
Chapter 16 · Scale
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: the ways scale is expressed, the calculations, and large and small scale. Then practice and the Scale Lab.
01
Expressing scale
Three ways a chart tells you its scale.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: expressing scale.
Expressing scale
Three common methods
Statement in words “One inch to ten nautical miles”: 1 inch on the chart is 10 nm on the Earth.
Jeppesen E(HI) 1/2: 1 inch to 20 nm.
Graduated scale line A scale bar at the foot of the chart, in nm, statute miles or km.
0 10 20 30 40 50 60 nm The latitude scale is one too: 1° = 60 nm.
Representative fraction Chart length ÷ earth distance in the same units , so it has no units:
1 : 500,000
1 cm = 500,000 cm, 1 inch = 500,000 inches.
Chapter 16 · Scale
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
Scale is the relationship between the length of a line on a chart and the distance on the Earth between the same points. It is given in three common ways. A statement in words, such as one inch to ten nautical miles; Jeppesen's E(HI) 1 and 2 use 1 inch to 20 nautical miles. A graduated scale line at the foot of the chart, in nautical miles, statute miles or kilometres; and since 1 degree of latitude is 60 nautical miles, the latitude scale is a graduated line too. And the representative fraction, chart length over earth distance in the same units, written with a 1 on top.
Graduated scale line
Measure on the chart, read off the scale
Open dividers across the track, then lay them on the scale line or the latitude scale.
Scale line at the foot of the chart: nm, statute miles or km Latitude scale on the meridian: 1′ of latitude = 1 nm Measure at about the same latitude as the track
52°20′ 52°10′ 52°00′ A B 0 10 20 30 40 50 60 nm Measure A to B with dividers… …then lay them on the scale line A–B = 37 nm or on the latitude scale: 1′ = 1 nm
Chapter 16 · Scale
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
A graduated scale line lets you measure without arithmetic. Open the dividers across the track, then move them to the scale line at the foot of the chart and read the distance: here 37 nautical miles. The latitude scale along a meridian works the same way, since one minute of latitude is one nautical mile. On a chart whose scale changes, measure on the latitude scale at about the latitude of the track.
Representative fraction
Scale = chart length ÷ earth distance
Both in the same units , so they cancel.
Written with 1 on top: 1 : 500,000.
1 cm on the chart = 500,000 cm = 5 km .
Chapter 16 · Scale
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
The representative fraction is the statement in words put into mathematical form: chart length divided by earth distance. By convention the chart length is 1, and the units above and below the line are the same, so they cancel and the fraction is dimensionless. On the ICAO 1 to 500,000 topographical chart, 1 centimetre represents 500,000 centimetres, 5 kilometres, and 1 inch represents 500,000 inches.
Converting
From words to a representative fraction
Put the earth distance into the same units as the chart length, then divide.
One inch to ten nautical miles = 1 : 729,600
Check: 10 × 6080 × 12 = 729,600.
1 inch : 10 nm statement in words 1 inch : 10 × 6080 ft × 6080: nm to feet 1 inch : 60,800 × 12 in × 12: feet to inches 1 : 729,600 same units: the RF Works in cm, inches or any unit: the ratio is the same
Chapter 16 · Scale
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
To convert a statement in words into a representative fraction, put both parts into the same units. One inch to ten nautical miles: multiply by 6080 to get feet, then by 12 to get inches. 10 times 6080 times 12 is 729,600, so the RF is 1 to 729,600. Once the units match, the fraction works for centimetres or any other unit.
Conversion factors
The numbers you will need
Conversion Factor 1 nautical mile 6080 ft = 1852 m 1 metre 3.28 ft 1 inch 2.54 cm 10 km 5.4 nm
Ready reckoners 1 nm = 185,200 cm
1 nm = 72,960 in
1 km = 100,000 cm
The factors are approximate, so different routes through the arithmetic give slightly different answers. Choose the nearest option.
Chapter 16 · Scale
08
E-books by eatpl.in · © 2026 · Do not copy or distribute
The conversion factors: 1 nautical mile is 6080 feet or 1852 metres; 1 metre is 3.28 feet; 1 inch is 2.54 centimetres; and 5.4 nautical miles is 10 kilometres. It helps to know that a nautical mile is 185,200 centimetres or 72,960 inches, and a kilometre is 100,000 centimetres. Because the factors are approximate, metric and imperial routes give small differences; pick the nearest of the options given.
02
Scale calculations
One equation: RF = chart length ÷ earth distance.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: scale calculations.
Example 1
5 cm represents 7 nautical miles: what is the scale?
RF = chart length ÷ earth distance Earth distance in cm: 7 × 1852 × 100 = 1,296,400 cm RF = 5 ÷ 1,296,400 Divide top and bottom by 5: 1 : 259,280
On the calculator Work out the denominator first, then divide by the chart length: the answer is the bottom of the fraction.
259280 7 × 1852 × 100 ÷ 5 =
Chapter 16 · Scale
10
E-books by eatpl.in · © 2026 · Do not copy or distribute
Example 1: on a chart, 5 centimetres represents 7 nautical miles. Put the earth distance into centimetres: 7 times 1852 metres times 100 is 1,296,400 centimetres. The RF is 5 over 1,296,400; dividing top and bottom by 5 gives 1 over 259,280. On the calculator, evaluate the denominator first and divide by the numerator: 7 times 1852 times 100 divided by 5 gives 259,280 directly. Entering the numerator first gives the RF as a small decimal, which is slower to use.
Types of question
Know two, find the third
Find the scale RF = CL ÷ ED
Given chart length and earth distance (Example 1).
Find the earth distance ED = CL × denominator
Given the scale and a length on the chart (Example 2).
Find the chart length CL = ED ÷ denominator
Given the scale and a distance, perhaps from groundspeed × time.
Chapter 16 · Scale
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
All simple scale problems use one equation: RF equals chart length over earth distance. Given the chart length and earth distance, find the RF. Given the scale and a chart length, find the earth distance: chart length times the denominator. Given the scale and an earth distance, find the chart length: distance divided by the denominator. Get both lengths into the same units first. Mercator scale, where scale changes with latitude, comes in a later chapter.
Example 2
1.7 cm on a 1 : 5,000,000 chart
How many nautical miles does 1.7 cm represent?
1 ÷ 5,000,000 = 1.7 cm ÷ ED ED = 1.7 × 5,000,000 = 8,500,000 cm ED = 8,500,000 ÷ (1852 × 100) = 45.89 nm Rounding: conversion factors are approximate. Choose the nearest option.
Chart 1 : 5,000,000 1.7 cm 0 1 2 × 5,000,000 = 8,500,000 cm on the Earth ÷ 100,000 = 85 km ÷ 185,200 (cm per nm) from 8,500,000 = 45.89 nm
Chapter 16 · Scale
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
Example 2: on a chart of scale 1 to 5 million, how many nautical miles does 1.7 centimetres represent? The earth distance is 1.7 times 5 million, 8.5 million centimetres, which is 85 kilometres. Dividing by 185,200 centimetres per nautical mile gives 45.89 nautical miles. Because conversion factors are approximate, look at the options and choose the nearest.
03
Large and small scale
Large scale, lots of detail. Small scale, lots of area.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: large and small scale.
Large and small scale
Detail or area?
Large scale Ordnance Survey 1 : 50,000 : 2 cm = 1 km. Not much area, lots of detail.
Small scale A world atlas, 1 : 5,000,000 . Lots of area, not much detail.
1 : 5,000,000 · small scale: lots of area, little detail 1 : 50,000 · large scale: lots of detail, little area The red square on the small-scale chart
Chapter 16 · Scale
14
E-books by eatpl.in · © 2026 · Do not copy or distribute
Large or small scale often confuses. A UK Ordnance Survey map at 1 to 50,000 is large scale: 2 centimetres represents 1 kilometre, it covers little area but shows lots of detail. A world atlas is small scale: lots of area, little detail. The clip zooms from a small-scale chart into one small square drawn at large scale.
Large and small scale
The fraction is in the right sense
Large scale Small scale Example 1 : 50,000 1 : 5,000,000 As a decimal 0.00002 0.0000002 Denominator Smaller Larger Shows Lots of detail Lots of area
Large scale: smaller denominator. Small scale: larger denominator.
We say “fifty thousand” and “five million” because the denominators are easier to handle, but the larger fraction is the larger scale.
Chapter 16 · Scale
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
The representative fraction is in the right sense: a large scale gives a larger RF. 1 over 50,000 is 0.00002, larger than 1 over 5 million, 0.0000002. The confusion comes from talking about charts by their denominators, a fifty thousand or a five million. So remember: large scale, smaller denominator; small scale, larger denominator.
Summary
What to take into the exam
Three ways Words, graduated scale line (incl. latitude scale), representative fraction.
One equation RF = chart length ÷ earth distance, same units. Know two, find the third.
Factors 1 nm = 6080 ft = 1852 m; 1 in = 2.54 cm; 1 m = 3.28 ft; 10 km = 5.4 nm.
Large or small Large scale: smaller denominator, more detail. Small scale: more area.
Chapter 16 · Scale
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four things: the three ways of expressing scale; the one equation, RF equals chart length over earth distance in the same units; the conversion factors; and that large scale means a smaller denominator and more detail.
Practice · Questions 1–6
Scale calculations
1. RF for: (a) 1 cm represents 5 km (b) 1 cm represents 5.4 nm (c) 1 inch represents 15.4 km (d) 3.5 inches represent 70 km (e) 5 inches represent 8 nm
2. On a 1 : 500,000 chart: (a) cm and inches for 30 km (b) inches and cm for 30 nm
3. On a 1 : 1,000,000 chart: (a) chart length for 50 km, in cm and inches (b) larger or smaller scale than Q2?
4. 5 cm represents 7 nm. (a) RF? (b) Inches for the distance flown in 5 min at 156 kt?
5. 14.8 cm represents 20 nm. (a) RF? (b) Inches for 9 min at 185 kt?
6. 1 cm represents 3.5 km. (a) RF? (b) Inches for 4 min at 204 km/h?
Chapter 16 · Scale
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
The questions from the end of Chapter 16. The Scale Lab sets up each one.
Practice · Answers
Answers and working
Q Answer Working 1a 1 : 500,000 500,000 cm 1b 1 : 1,000,000 5.4 × 185,200 = 1,000,080 1c 1 : 600,000 (approx) 1,540,000 ÷ 2.54 = 606,299 1d 1 : 788,000 7,000,000 ÷ 8.89 1e 1 : 116,740 8 × 72,960 ÷ 5 2a 6 cm, 2.36 in 3,000,000 ÷ 500,000 2b 4.38 in, 11.12 cm 5,556,000 ÷ 500,000
Q Answer Working 3a 5 cm = 1.97 in 5,000,000 ÷ 1,000,000 3b Smaller Larger denominator 4a 1 : 260,000 1 : 259,280 4b 3.65 in 13 nm = 2,407,600 cm 5a 1 : 250,000 3,704,000 ÷ 14.8 5b 8.1 in 27.75 nm ÷ scale 6a 1 : 350,000 350,000 cm 6b 1.53 in 13.6 km = 3.89 cm
Chapter 16 · Scale
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers. Small differences come from the approximate conversion factors.
Scale from a chart length and an earth distance, in any units Earth distance or chart length from the scale Groundspeed and time to chart length, with a scale line drawn for the chart All 6 practice questions, one tap each Open the Scale Lab →
0 1 2 3 4 0 10 20 30 40 50 60 nm RF = CL ÷ ED
Chapter 16 · Scale
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
The Scale Lab finds the representative fraction from a chart length and an earth distance in any units, the earth distance or chart length from a scale, chart lengths from groundspeed and time, draws a scale line for the chart, and sets up all six practice questions.
eatpl.in · General Navigation · Chapter 16
Scale Lab
RF = chart length ÷ earth distance, both in the same units. Give any two and find the third.
Find the scale
Earth distance
Chart length
Practice
The questions from the end of Chapter 16, one part per row. Set up works it in the lab; Answer shows the answer. Small differences come from the conversion factors.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.