General Navigation · Chapter 17
General Chart Properties
From globe to flat chart: projections, the ideal chart, and why angles must be right.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 17 introduces chart projections: how the graticule of the globe is transferred to a flat sheet using a plane, a cylinder or a cone, what properties an ideal chart would have, and why orthomorphism, correct angles, is the one property navigation cannot do without.
Chapter roadmap
What this chapter covers
01
Projections Plane, cylinder and cone: three ways to flatten the graticule.
02
The ideal chart What we would like, and the two things we can never have.
03
Orthomorphism Correct angles: the two conditions for a conformal chart.
Chapter 17 · General Chart Properties
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: the projection surfaces, the properties of an ideal chart, and orthomorphism or conformality. Then questions to check yourself and the Projection Lab.
01
Projections
Transferring the globe onto flat paper.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: chart projections.
Chart projections
Light inside a globe, paper outside
Perspective (geometric) Produced directly by projection, originally a light inside a globe shining the graticule onto paper.
Non-perspective Produced by mathematics. Most charts we use are these: think of them as perspective projections modified mathematically.
The reduced earth The scale model the chart is projected from. A 1 : 1,000,000 chart starts from a one-millionth model of the Earth.
Chapter 17 · General Chart Properties
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
Projection originally meant exactly that: a light inside a globe projected the latitude and longitude graticule onto a sheet of paper. Charts made this way are perspective, or geometric, projections. Today most charts are produced by computer models, by mathematics; these non-perspective charts can be thought of as perspective projections modified mathematically. The reduced earth is the scale model the chart is based on: a one-millionth model for a 1 to 1,000,000 chart.
Types of projection
Plane, cylinder and cone
Azimuthal / plane Paper touches the Earth at one point. Used for polar charts (polar stereographic).
Cylindrical A cylinder touching the equator: Mercator . Also Transverse and Oblique Mercator.
Conical A cone over the Earth, then slit and opened: Lambert conformal conic.
Chapter 17 · General Chart Properties
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
There are three general projection surfaces. An azimuthal or plane projection puts a flat sheet against one point of the Earth; the only one in the syllabus is for the polar regions, the polar stereographic chart. A cylindrical projection wraps a cylinder round the reduced earth, touching at the equator: Mercator's projection, and also the Transverse and Oblique Mercator. A conical projection places a cone over the Earth, which is then slit and opened out. The clip shines the graticule onto each surface in turn.
Azimuthal projection
A flat sheet at the pole
Light at the centre shines each parallel onto a sheet touching the pole.
Parallels: concentric circles round the pole Meridians: straight lines radiating from the pole Covers a whole hemisphere, but only the centre is used: polar flights
flat sheet touching the pole The chart: polar graticule 75° 60° 45° 30° meridians: straight lines from the pole
Chapter 17 · General Chart Properties
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
An azimuthal projection places a flat sheet against one point of the Earth, here the pole. Light from the centre shines each parallel onto the sheet as a circle round the pole, and the meridians become straight lines radiating from it. The projection could cover a whole hemisphere, but only the central area is used, for example for flights over Antarctica. Polar stereographic charts are covered in a later chapter.
Cylindrical projection
A cylinder round the equator
Mercator's idea, in the 16th century: wrap a cylinder round the reduced earth, touching at the equator, then open it out.
Meridians: equally spaced straight lines Parallels: straight lines, spreading out towards the poles Shapes stretch north–south; used mainly near the equator
cylinder touching the equator Opened out meridians equally spaced 0° 20°N 20°S 40°N 40°S 55°N 55°S parallels spread out towards the poles
Chapter 17 · General Chart Properties
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
The earliest chart projections, in the 16th century, came from the Flemish navigator Gerhard Kremer, known as Mercator. A cylinder of paper is wrapped round the reduced earth touching at the equator, the graticule is projected onto it, and it is opened out flat. The meridians come out as equally spaced straight lines and the parallels as straight lines that spread out towards the poles, so shapes are stretched north to south. Most of the world can be shown, but the chart is normally used near the equator. Transverse and Oblique Mercator are cylindrical too.
Conical projection
A cone over the Earth, slit and opened
Place a cone over the reduced earth, project the graticule onto it, slit it along a meridian and open it out.
Meridians: straight lines converging towards the pole Parallels: arcs of circles Use a small section: like the ICAO 1 : 500,000 chart (Lambert)
cone touching 45°N Slit and opened out 75° 60° 45° 30° 15° meridians converge; parallels are arcs
Chapter 17 · General Chart Properties
08
E-books by eatpl.in · © 2026 · Do not copy or distribute
A conical projection places a cone of paper over the reduced earth and projects the graticule onto it. The cone is slit along one meridian and opened out into a flat fan. The meridians are straight lines converging towards the pole and the parallels are arcs of circles. The whole hemisphere could be shown, but only a small section is used, where the graticule looks like the familiar ICAO 1 to 500,000 topographical chart, a Lambert conformal conic.
A useful way to see it
Every one of these is a cone
Azimuthal A cone with an apex angle of 180° : flat.
Conical Anything in between.
Cylindrical A cone with an apex angle of 0° .
Chapter 17 · General Chart Properties
09
E-books by eatpl.in · © 2026 · Do not copy or distribute
Mathematically, all three are conical. An azimuthal projection uses a cone whose apex angle is 180 degrees, a flat sheet; a cylinder is a cone whose apex angle is zero. So you will notice that azimuthal and cylindrical charts share properties with conical charts.
02
The ideal chart
What we would like a chart to do.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: the properties of an ideal chart.
Properties of an ideal chart
The wish list
Representing the Earth's surface Angles shown as the same angles Scale constant and correct True shapes Equal areas shown as equal areas
Navigation requirements Rhumb lines as straight lines Great circles as straight lines Latitude and longitude easy to plot Adjacent sheets fit correctly Worldwide coverage
Chapter 17 · General Chart Properties
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
Having ways to project the sphere onto paper, what would we like the chart to do? To represent the Earth's surface: angles shown as the same angles, a constant and correct scale, true shapes, and equal areas shown as equal. For navigation: rhumb lines and great circles as straight lines, easy plotting, adjacent sheets that fit, and worldwide coverage. The list is not complete.
Only on a globe
Two things no chart can ever have
Constant, correct scale Nearly constant in a small area, by mathematics, but never over a large one.
True shapes of large areas Small areas can be shown reasonably accurately; large areas cannot.
Chapter 17 · General Chart Properties
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
Two of the ideal properties can never be obtained except on a globe. Scale can never be constant and correct: charts can be modified to give nearly constant scale over small areas, but not large ones. And the shapes of large areas cannot be shown perfectly, though small areas can be shown reasonably accurately. All the other properties can be achieved, but not all on the same chart.
Choosing
What a pilot really needs
Not essential Equal area : pilots do not compare areas. A farmer comparing wheat yields in Kansas and Azerbaijan would care; a navigator does not.
Some distortion of shape is fine, as long as landmarks can be recognised.
Essential Correct bearings : angles on the Earth must be shown correctly on the chart.
A track measured on the chart must be the true direction on the Earth. Most charts do not do this.
Charts that do are orthomorphic or conformal .
Chapter 17 · General Chart Properties
13
E-books by eatpl.in · © 2026 · Do not copy or distribute
Not every ideal property matters for navigation. Pilots do not compare areas, so equal area does not matter, although it would to someone comparing wheat yields from a thousand hectares in Kansas and in Azerbaijan. A reasonable amount of shape distortion is acceptable if landmarks can be recognised. The one essential property is that bearings are correct: angles on the Earth must be represented by the same angles on the chart. If a track measured on the chart is not the true direction on the Earth, the chart is useless for navigation. Charts with this property are a minority, called orthomorphic or conformal. Your ICAO 1 to 500,000 chart says Lambert conformal conic just above the scale line.
03
Orthomorphism
Two conditions for correct angles.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: orthomorphism, or conformality.
Condition 1
Meridians and parallels must cross at 90°
On the Earth, meridians and parallels always meet at right angles. On a conformal chart they must too.
Earth: X bears 056° from O Skew the graticule: the same line now measures about 028° Shape and bearing both wrong: not conformal Transverse and Oblique Mercator graticules look unusual, but they still cross at 90°: conformal.
O 056° On the Earth: meridians and parallels cross at 90° X 28° Graticule crossing at 51.8°: OX now measures 028° X Not conformal: shapes and bearings are wrong
Chapter 17 · General Chart Properties
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
The first condition for orthomorphism: meridians and parallels must intersect at right angles on the chart, as they do on the Earth. Take a rectangle on the Earth, with X bearing 056 from O. Distort the graticule so the intersection is no longer 90 degrees: not only is the shape wrong, but the bearing of X from O now measures about 028 degrees. The chart is not conformal. Every graticule so far meets this rule, and so do the Transverse and Oblique Mercator, whose graticules look unusual.
Condition 2
Scale at a point the same in all directions
Change the north–south scale but not the east–west, and every angle changes.
Earth: a square, OY bearing 045° Stretch N–S only: a rectangle, OY 035° So at any point the scale must be the same in every direction, or change at the same rate in every direction
O 045° Y A square on the Earth 035° Y N–S scale × 1.43, E–W unchanged: a rectangle, and OY now measures 035°
Chapter 17 · General Chart Properties
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
The second condition is about scale at a point. A square on the Earth, with OY bearing 045. On the chart the north-south scale has changed but the east-west scale has not: the square becomes a rectangle and OY now measures 035. The chart is not orthomorphic. Since no chart has constant scale, the condition is: at any point, scale should be the same in all directions, or should change at the same rate in all directions. The simple cylindrical projection fails this: its north-south scale grows faster than its east-west scale, stretching shapes. Mercator adjusted the north-south spacing mathematically to make his chart conformal, the subject of the next chapter.
Summary
What to take into the exam
Projections Plane (azimuthal, polar), cylinder (Mercator), cone (Lambert). Perspective or non-perspective; reduced earth.
Never possible Constant correct scale, and true shapes of large areas: only on a globe.
Essential Correct angles: orthomorphic or conformal. Equal area does not matter to pilots.
Two conditions Graticule crosses at 90°; scale at a point the same in all directions, or changing at the same rate.
Chapter 17 · General Chart Properties
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four things: the three projection surfaces and where each is used; the two ideal properties that are only possible on a globe; that the essential property for navigation is correct angles, orthomorphism or conformality; and its two conditions.
Check yourself · Questions 1–5
Questions on this chapter
1. A chart produced directly by projecting the graticule with light is: (a) non-perspective (b) perspective (geometric) (c) conformal (d) equal area
2. For a 1 : 1,000,000 chart, the “reduced earth” is: (a) the chart sheet (b) a one-millionth scale model of the Earth (c) the Earth without its poles (d) a sphere of radius 1 nm
3. Which projection surface touches the Earth at a single point? (a) cylinder (b) cone (c) plane (d) none of them
4. In the simple cylindrical projection the cylinder touches the reduced earth at: (a) a standard parallel (b) the equator (c) the poles (d) the Greenwich meridian
5. Which two ideal properties can never be obtained except on a globe? (a) correct bearings and straight rhumb lines (b) constant correct scale and true shapes of large areas (c) worldwide coverage and equal areas (d) straight great circles and easy plotting
Chapter 17 · General Chart Properties
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
These check-yourself questions by eatpl.in follow the text of the chapter.
Check yourself · Questions 6–10
Questions on this chapter
6. The one essential property of a navigation chart is: (a) equal area (b) angles shown correctly (c) constant scale (d) great circles as straight lines
7. The two conditions for orthomorphism are: (a) meridians and parallels cross at 90°, and scale at a point is the same in all directions or changes at the same rate (b) straight meridians and equally spaced parallels (c) constant scale and equal area (d) straight great circles and curved rhumb lines
8. A cone with an apex angle of 180° is equivalent to: (a) a cylinder (b) a plane (azimuthal) (c) a sphere (d) a Lambert chart
9. The projection of the ICAO 1 : 500,000 topographical chart is: (a) Mercator (b) polar stereographic (c) Lambert conformal conic (d) Transverse Mercator
10. On a chart, the N–S scale has changed but the E–W scale has not; a 045° line measures 035°. The chart is: (a) conformal (b) not conformal (c) equal area (d) azimuthal
Chapter 17 · General Chart Properties
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
Check yourself · Answers
Answers and reasons
Q Answer Why 1 b Direct projection: perspective 2 b One-millionth model 3 c A plane touches at one point 4 b Tangent at the equator 5 b Only a globe has both
Q Answer Why 6 b Orthomorphism 7 a Both conditions 8 b 180° cone = flat sheet 9 c Printed above the scale line 10 b Fails condition 2
Chapter 17 · General Chart Properties
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers: 1 b, 2 b, 3 c, 4 b, 5 b, 6 b, 7 a, 8 b, 9 c, 10 b.
Try it yourself
Projection Lab
Plane, cylinder or cone around the 3D Earth, with the graticule projected onto it The same graticule opened out flat Conformality: skew the graticule or stretch the scale and watch a bearing change All 10 check-yourself questions Open the Projection Lab →
Chapter 17 · General Chart Properties
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
The Projection Lab puts a plane, cylinder or cone around the 3D Earth with the graticule projected onto it, shows the graticule opened out flat, lets you skew the graticule or stretch the scale to see bearings change, and has all ten check-yourself questions.
Loading Earth…
Drag to rotate · scroll or pinch to zoom
eatpl.in · General Navigation · Chapter 17
Projection Lab
Project the graticule from the centre of the Earth onto a plane, a cylinder or a cone, open it out, and test the two conditions for a conformal chart.
Projection
Conformality
Check yourself
Projection surface
Plane Cylinder Cone
Cone touches latitude (°N): 45
The light is at the centre of the Earth (a perspective projection). The inset shows the surface opened out flat.
These check-yourself questions by eatpl.in follow the chapter. Show sets up the lab where it helps.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.