General Navigation · Chapter 34
Inertial Navigation System
Gyros and accelerometers on a stable platform: navigation from nothing but Newton’s laws.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 34 covers the inertial navigation system: the basic principles, accelerometers and integrators, gravity effects, the integrating gyroscope, the stable platform, earth orientation and apparent wander, alignment, the Schuler period, bounded, unbounded and inherent errors, the control and display panels, warning lights and checks.
Chapter roadmap
What this chapter covers
01
Principles Accelerometers and two stages of integration.
02
The platform Gyros, gimbals, earth rate, transport rate, Schuler.
03
Alignment and errors Levelling, gyro compassing; bounded and unbounded.
040 502 04
Controls MSU and CDU, displays, lights and checks.
Chapter 34 · Inertial Navigation System
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four parts: the principles, accelerometers and integrators; the stable platform, gyros, earth orientation and the Schuler period; alignment and errors; and the mode selector and control display units, their displays, warning lights and checks. Then the chapter questions and the INS Lab.
01
Principles
Measure acceleration, integrate twice.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part one: the basic principles.
Introduction
From inertial sensors to navigation
Inertial Sensor System A stable platform with high-quality gyros and accelerometers , and a computer.
Integrate acceleration → velocity ; integrate velocity → distance .
What it gives 040 502 Pitch and roll, true heading , true track, drift, present position , groundspeed and wind .
INS adds waypoints Stored waypoints: track angle error , distance and time to go .
Feeds the autopilot, flight director or manual flying.
Newton, then Einstein An accelerometer cannot tell rest from steady velocity, only changes of velocity.
Self-contained: no ground stations.
Chapter 34 · Inertial Navigation System
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
The heart of the system is the inertial sensor system: a stable platform with high-quality gyros and accelerometers, and a computer which integrates the accelerometer outputs once to give velocity and again to give distance travelled. From this come pitch and roll attitude, true heading, true track, drift, present position, groundspeed and wind. A further computer stores waypoints and computes track angle error, distance and time to go, for the autopilot, flight director or manual flying. By Newton’s laws, and Einstein’s point that rest is only relative, the accelerometer senses changes of velocity, not velocity itself.
Accelerometers and integrators
Integrate once for speed, twice for distance
Two accelerometers on the platform: N–S and E–W (often a third, vertical) 1st integration: acceleration × time → velocity 2nd integration: velocity × time → distance From the start position: present position, groundspeed, track and more
One channel (north): accelerometer → integrator → integrator acceleration ft/s² velocity kt distance nm ∫ dt ∫ dt accelerate · cruise · decelerate The computer adds the two channels to the start position North distance → change of latitude (1 nm = 1′) East distance (departure) → × sec latitude → change of longitude Integrator errors 1st stage: bounded · 2nd stage: unbounded
Chapter 34 · Inertial Navigation System
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
Two accelerometers are mounted at the heart of the system, one sensing north–south and one east–west acceleration, often with a third for vertical. The acceleration signal is sent to an integrator, a time multiplier: acceleration in feet per second squared multiplied by time gives velocity. A second integrator multiplies velocity by time to give distance. The computer knows the start latitude and longitude, so it computes how far the aircraft has gone north and east and hence its new position: north distance gives change of latitude, and east distance, the departure, multiplied by the secant of the latitude gives the change of longitude.
The accelerometer
A pendulum held at its null
Basically a pendulous device: acceleration swings it off the null Pick-off → amplifier → torque motor restores the null The restoring current measures the acceleration If tilted, gravity gives a false acceleration : so mount it on a level platform
A force-feedback pendulous accelerometer accelerometer null torquer aircraft accelerates 1 pendulum swings off the null (inertia) 1 2 pick-off senses how far 2 3 amplifier drives current to the torquer 3 4 torque restores the null 4 5 current ∝ acceleration → integrator 5 g tilted by pitch or roll: gravity swings the pendulum false acceleration g·sin(tilt): so keep it earth-level
Chapter 34 · Inertial Navigation System
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
The accelerometer is basically a pendulous device. When the aircraft accelerates, the pendulum swings off the null position through inertia. A pick-off senses how far, the signal is amplified and the current fed back into a torque motor which restores the pendulum to the null. The current needed is a measure of the acceleration, and is passed to the integrator. If the accelerometer were hard-mounted and tilted in pitch or roll, gravity would swing the pendulum and give a false acceleration, so it is kept earth-horizontal on a stabilised platform.
From distances to position
Departure × sec latitude = change of longitude
North–south channel North distance (nm) = change of latitude (minutes).
e.g. 120 nm north → 2°00′ more latitude.
East–west channel East distance is departure ; d’long = departure × sec latitude.
e.g. 120 nm east at 60°N → 120 × 2 = 240′ = 4°00′ of longitude.
Readouts 040 502 Present position to 0.1′ of arc; groundspeed and track from the two velocities.
GS = √(Vn² + Ve²); track = atan(Ve/Vn).
Chapter 34 · Inertial Navigation System
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
The north–south channel’s distance is a change of latitude: one nautical mile is one minute. The east–west channel’s distance is departure, which must be multiplied by the secant of the latitude, divided by the cosine, to give the change of longitude: 120 nautical miles east at 60 north is 240 minutes, 4 degrees of longitude. The two velocities give groundspeed and track.
02
The platform
Level, north, and tied to the Earth.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: the platform, gyros, earth orientation and the Schuler period.
The stable platform in 3D
The aircraft moves round a level platform
Accelerometers and gyros on the inner element of a gimbal set Gyros sense tilt; gimbal motors drive the platform back level Three integrating gyros , input axes mutually perpendicularThree gimbal motors: pitch, roll and azimuth
Chapter 34 · Inertial Navigation System
09
E-books by eatpl.in · © 2026 · Do not copy or distribute
To keep the accelerometers level they are mounted on a gimbal assembly, the platform, which lets the aircraft go through any attitude change while the inner element stays earth-level. Gyros on the inner element sense any tilt; their pick-off signals are amplified and drive gimbal motors which restore the platform. In practice three integrating gyros are mounted with their input axes mutually perpendicular, and three gimbal motors drive the gimbals about pitch, roll and azimuth.
The integrating gyroscope
One degree of freedom, viscous restraint
Construction A can within a can: the inner gimbal pivoted inside a frame filled with viscous fluid .
The fluid supports the gimbal, reducing bearing torques.
Rate-integrating One degree of freedom ; viscous, not spring, restraint.
Output: the angle turned (the integral of rate), not the rate.
On the platform Three gyros, input axes mutually perpendicular.
Any incipient displacement → gimbal motor → platform back level and aligned.
Chapter 34 · Inertial Navigation System
10
E-books by eatpl.in · © 2026 · Do not copy or distribute
The integrating gyroscope used in an INS is a one degree of freedom gyro with viscous rather than spring restraint. It is basically a can within which another can, the inner gimbal, is pivoted; the outer can is filled with a viscous fluid which supports the weight of the inner gimbal and reduces bearing torques. Its output is the angle turned. Three are mounted on the platform with their input axes mutually perpendicular, sensing any displacement and driving the gimbal motors.
Earth orientation in 3D
Torquing the gyros to stay earth-level
Left alone the platform stays fixed in space: apparent wander Earth rate : depends on latitude, 0 at the equator to 15.04°/h at the polesTransport rate = aircraft velocity ÷ earth radius (V/R)Also compensated: Coriolis , centrifugal , Earth not a sphere
Chapter 34 · Inertial Navigation System
11
E-books by eatpl.in · © 2026 · Do not copy or distribute
A gyro-stabilised platform would stay fixed in space, but the aircraft operates on a rotating, round Earth. To keep the accelerometers level, the gyros are torqued for apparent wander: earth rate compensation, a function of latitude, which is zero at the equator rising to 15.04 degrees per hour at the poles; and transport rate compensation, the aircraft’s velocity divided by the Earth’s radius. Coriolis and centrifugal accelerations are compensated too, and corrections are made because the Earth is not a perfect sphere.
The Schuler period in 3D
An earth pendulum: 84.4 minutes
Schuler: a pendulum of length R, bob at the Earth’s centre Accelerate the suspension point: the bob stays below it, so a platform on it stays level Feeding back V/R and U/R makes the platform behave like it Displaced, it oscillates with the Schuler period, 84.4 min
Chapter 34 · Inertial Navigation System
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
Schuler postulated an earth pendulum of length equal to the Earth’s radius, its bob at the centre and its suspension point on the surface. However the suspension point is accelerated round the Earth, the bob stays vertically below it, so a platform on it stays horizontal. The INS platform is mechanised the same way by feeding back the aircraft’s velocity terms, V over R and U over R, as levelling gyro signals. If the platform is displaced it oscillates with a period of 84.4 minutes, the Schuler period.
03
Alignment and errors
Level, then north.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: alignment and errors.
Alignment
Warm up, level, then find true north
Warm-up : 3–4 min · coarse level and azimuth: 1–2° in secondsFine levelling : accelerometer outputs to zero, to 6″ of arc in 1–1½ minGyro compassing : the east gyro senses earth rotation until alignedAccelerometers levelled (velocity zero); platform to true north
Alignment on the ground: aircraft stationary, position known Warm-up 3–4 min fluid-filled parts to temperature Coarse align seconds level to the frame/gravity; azimuth to best true heading: 1–2° Fine level 1–1½ min accelerometers to zero output: to 6 arc-seconds Gyro compassing east gyro senses earth rotation until aligned to true north true north platform (level and heading exaggerated) MSU STBY ALIGN NAV READY NAV Don’t move the aircraft until READY NAV is lit and NAV is selected It cannot be re-levelled or re-aligned in flight
Chapter 34 · Inertial Navigation System
14
E-books by eatpl.in · © 2026 · Do not copy or distribute
The stable element must be aligned in attitude and azimuth. Warm-up brings the fluid-filled components to temperature in 3 to 4 minutes. Coarse alignment levels the platform roughly, from the aircraft frame or gravity switches or the accelerometers, and turns it to the aircraft’s best known true heading: within 1 to 2 degrees in a few seconds. Fine levelling drives the accelerometer outputs to zero, within 6 seconds of arc in up to 1 and a half minutes. Gyro compassing then uses the east gyro, which senses a component of earth rotation unless the platform points true north, to torque the azimuth gyro until aligned. READY NAV then lights and NAV can be selected.
Errors of INS
Bounded, unbounded and inherent
Bounded : build up and return to zero within the 84.4-min cycle: platform tilt, accelerometer, 1st-stage integratorUnbounded track: azimuth misalignment, azimuth gyro wanderUnbounded distance: levelling gyro wander, 2nd-stage integratorInherent : the Earth’s shape and composition, its motion through space
Bounded: back to zero each 84.4-min Schuler cycle platform tilt, accelerometer error, 1st integrator 0 84.4 168.8 253.2 Unbounded distance error: grows with time levelling gyro wander, 2nd integrator 0 84.4 168.8 253.2 Unbounded track error: grows with distance initial azimuth misalignment, azimuth gyro wander 0 84.4 168.8 253.2 minutes
Chapter 34 · Inertial Navigation System
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
Bounded errors build up to a maximum and return to zero within the 84.4-minute Schuler cycle: platform tilt from initial misalignment, inaccurate accelerometers and errors in the first stage of integration. Unbounded errors are cumulative: track errors from initial azimuth misalignment and azimuth gyro wander, and distance errors from levelling gyro wander, which causes a Schuler oscillation about an increasingly divergent mean, and from the second stage of integration. Inherent errors come from the Earth’s irregular shape and composition and its motion through space.
Manual and automatic checks
Garbage in, garbage out
Latitude error Wrong earth-rate torquing: the platform won’t stay level or aligned.
A gross error is detected in ALIGN: the gyros’ sensed rates don’t match: WARN .
Longitude error Platform unaffected, so not detected .
Every later longitude, and the first leg’s track and distance, wrong by the same amount.
Waypoint error The INS flies accurately to the wrong place: it can’t detect finger trouble.
Recall each waypoint; check DSR TK and DIS against the flight plan.
Chapter 34 · Inertial Navigation System
16
E-books by eatpl.in · © 2026 · Do not copy or distribute
The start position must be inserted accurately. A latitude error makes the torque motors tilt the platform at the wrong rate, so it will not stay level or aligned; a gross latitude error is detected in align mode because the sensed drift and topple rates do not match the corrections, and the warning light comes on. A longitude error does not affect the platform and is not detected: all later longitudes are wrong by the same amount. A waypoint error cannot be detected at all: recall each waypoint and check the desired track and distance between waypoints against the flight plan.
04
Controls
MSU, CDU and lights.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part four: control and display panels, warning lights.
Control display unit
Turn the selector, read two windows
Two LED windows; the function selector picks what they show TK/GS · HDG/DA · XTK/TKE · POS · WPT · DIS/TIME · WIND · DSR TK/STS HOLD to update position over a fix; INSERT with the keyboardWaypoint 0 = present position, for direct-to
040.0 502 050.0 L10.0 R12.0 L20.0 N34 31.5 W117 11.3 N36 01.4 W115 00.0 140 16.7 155 85 060.0 TK/GS HDG/DA XTK/TKE POS WPT DIS/TIME WIND DSR TK/STS 1 2 3 4 5 6 7 8 9 N 0 E ALERT BAT WARN ALERT TK/GS Track and groundspeed TK 040.0°T, GS 502 kt HDG/DA Heading and drift HDG 050.0°T, drift 10° left XTK/TKE Cross-track, track error 12 nm right, track 20° left of desired POS Present position 34°31.5′N 117°11.3′W WPT Waypoint 4 36°01.4′N 115°00.0′W DIS/TIME Distance and time 140 nm, 16.7 min to go WIND Wind 155°T / 85 kt DSR TK/STS Desired track 060.0°T (status in align only) example desired track 060° ALERT (amber) AUTO: steady 2 min to go, out at the waypoint MAN: steady at 2 min, flashes from 30 s until track change not below a set speed
Chapter 34 · Inertial Navigation System
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
The control display unit has two LED windows whose contents are chosen by the function selector: track and groundspeed, 040 and 502 knots in the example; heading and drift angle, 050 and 10 left; cross-track distance and track angle error, 12 right and 20 left; present position; waypoint positions; distance and time to the next waypoint, 140 miles and 16.7 minutes; wind, 155 at 85; and desired track, 060, with status only in align. HOLD freezes position for an update over a fix. Waypoint 0 is present position, used for direct-to. The ALERT light comes on 2 minutes before a waypoint.
Cross-track and track error
Which side, and which way
XTK : perpendicular distance from the direct great-circle track, L or R TKE : actual track minus desired track, L or R Drift: track minus heading, L or R Example: 12 nm right of track, tracking 20° left of it
desired track 060°T WPT 3 WPT 4 track 040°T XTK 12 nm R HDG 050°T XTK/TKE R12.0 L20.0 HDG/DA 050.0 L10.0 DSR TK 060.0 TKE = actual track − desired track = 040 − 060 = 20° LEFT drift = track − heading = 040 − 050 = 10° LEFT
Chapter 34 · Inertial Navigation System
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
XTK, the cross-track distance, is the aircraft’s perpendicular displacement from the direct great-circle track between the selected waypoints, preceded by L or R. TKE, the track angle error, is the angle between the desired track and the track actually being made good, L or R as the actual track is left or right of the desired one. In the example the desired track is 060: the aircraft is 12 miles right of track, tracking 040, so 20 degrees left of desired, with heading 050 and drift 10 left.
Mode selector and warning lights
What each light means
Light Means Action READY NAV (MSU), green alignment complete select NAV BATT (MSU), red battery too low to run check power supplies ALERT (CDU), amber approaching (MAN: overflying) a waypoint none, unless MAN: TK CHG BATT (CDU), amber running on back-up battery check power supplies WARN (CDU), flashing red system malfunction DSR TK/STS: action code
MSU modes STBY : power on; insert the ramp position.
ALIGN : level and gyro-compass → READY NAV.
NAV : free to taxi.
ATT REF : no nav computing; attitude and a limited heading, reset periodically.
Chapter 34 · Inertial Navigation System
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
On the mode selector: standby powers the system and the ramp position is inserted; align levels and gyro-compasses and lights READY NAV, green, when NAV can be selected and the aircraft can taxi; ATT REF gives attitude and a limited heading without navigation computing, the gyros gravity-tied, the heading reset periodically. The red BATT light on the MSU means the battery is too low; the amber BATT light on the CDU means the INS is on its back-up battery; amber ALERT means a waypoint is approaching; flashing red WARN means a malfunction, with an action code on DSR TK/STS.
Summary
The INS in six lines
Topic Remember Principle N and E accelerometers on a level platform; integrate once → velocity, twice → distance; d’long = departure × sec lat Platform Three integrating gyros, gimbal motors in pitch, roll, azimuth; torqued for earth rate and transport rate (V/R); Coriolis Schuler Earth pendulum of length R: period 84.4 min; bounded errors return to zero each cycle Alignment Warm-up 3–4 min · coarse 1–2° · fine level 6″ in 1–1½ min · gyro compassing · don’t move until READY NAV + NAV Errors Bounded: tilt, accelerometer, 1st integrator · unbounded: azimuth, gyro wander, 2nd integrator · inherent CDU TK/GS, HDG/DA, XTK/TKE, POS, WPT, DIS/TIME, WIND, DSR TK/STS · ALERT 2 min · check waypoints v flight plan
Chapter 34 · Inertial Navigation System
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
In summary: accelerometers on a level platform, integrated twice, give velocity and distance; departure times secant latitude gives change of longitude. The platform is held level by three integrating gyros and gimbal motors, torqued for earth and transport rate. The Schuler period is 84.4 minutes. Alignment takes warm-up, coarse and fine levelling and gyro compassing; do not move until READY NAV and NAV. Errors are bounded, unbounded or inherent. The CDU shows eight functions; ALERT comes on 2 minutes before a waypoint.
Questions 1–3
Questions: set 1
1. INS errors are classified as bounded and unbounded: (a) an unbounded error increases with time, e.g. the distance gone error due to a groundspeed error (b) an unbounded error increases with time, e.g. an increasing GS error from the platform not levelled (c) a bounded error is subject to sudden random changes, e.g. pitching, flap, U/C (d) a bounded error is tied to the real wander rates of the gyros
2. Two checks that two sequential waypoints are entered correctly: (a) DSR TK/STS status less than 4; DIS/TIME time agrees with the plan (b) DIS/TIME distance and time agree (c) DIS/TIME distance agrees; DSR TK/STS track agrees with the plan track (d) DIS/TIME distance agrees; HDG/DA heading agrees
3. E/W accelerations become E/W speed at the 1st stage and E/W distance at the 2nd. This gives: (a) departure × cos lat → d’long (b) d’long directly (c) departure × sec lat → d’long (d) departure × sin lat → d’long
Chapter 34 · Inertial Navigation System
22
E-books by eatpl.in · © 2026 · Do not copy or distribute
Questions 4–7
Questions: set 2
4. To convert departure into change of longitude it has to: (a) be divided by sec lat (b) be multiplied by sec lat (c) be divided by tan lat (d) be multiplied by cos lat
5. The amber ALERT light on the CDU: (a) steady 2 min before the next waypoint in AUTO (b) flashes 2 min before, out at 30 s (c) on if on standby battery (d) steady after passing a waypoint in MAN until the next leg
6. Integrators: i) 2nd stage suppresses unbounded errors ii) 1st stage: acceleration → speed iii) 2nd stage: speed → distance iv) align the platform. (a) all (b) ii, iii, iv (c) i, ii, iii (d) ii and iii
7. In flight a north-referenced INS computer compensates for: (a) manoeuvres, real wander, apparent wander, transport wander (b) Coriolis, real, apparent, transport wander (c) earth rotation, transport wander, Coriolis (d) transport, apparent wander, Coriolis, variation
Chapter 34 · Inertial Navigation System
23
E-books by eatpl.in · © 2026 · Do not copy or distribute
Questions 8–10
Questions: set 3
2 3 TK 5 nm position 6° Past waypoint 2, tracking along TK. HDG/DA shows 6L / 080 .
8. DSR TK/STS left window shows: (a) 074 (b) 086 (c) 068 (d) 080
9. XTK/TKE shows: (a) 5L 6R (b) 5R 6R (c) 5L 6L (d) 6R 5L
10. During initialisation the aircraft must not be moved until: (a) the ramp position is inserted and checked (b) the platform is levelled (c) the gyros and accelerometers are nulled (d) READY NAV is lit and NAV selected
Chapter 34 · Inertial Navigation System
24
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers
Answers with the reasoning
Q Answer Why 1 (a) Unbounded errors grow with time: a groundspeed error gives a growing distance error 2 (c) Distance and desired track between waypoints v the flight plan 3 (c) Departure × sec lat = d’long 4 (b) Multiply by sec lat (divide by cos lat) 5 (a) Steady 2 min before the waypoint in AUTO 6 (d) Integrators only integrate: 1st → speed, 2nd → distance 7 (c) Earth rotation, transport wander and Coriolis 8 (c) 068 Track = 080 − 6 = 074; desired track is 6° left of it: 068 9 (b) 5R 6R Right of the desired track; tracking 6° right of it 10 (d) READY NAV and NAV selected
Chapter 34 · Inertial Navigation System
25
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers with the reasoning. Question 8: heading 080 with 6 left drift is a track of 074; the desired track is 6 degrees left of that, 068. Question 9: the aircraft is 5 miles right of the desired track and tracking 6 degrees right of it.
Align an INS: STBY, ALIGN, READY NAV, NAV Fly a route with a working CDU: all eight displays live Add accelerometer bias, gyro drift or azimuth misalignment Watch bounded (Schuler) and unbounded errors grow The chapter questions, with the XTK/TKE case set up Open the INS Lab →
040.0 502
Chapter 34 · Inertial Navigation System
26
E-books by eatpl.in · © 2026 · Do not copy or distribute
The INS Lab lets you align an INS, fly a route with a working control display unit, inject accelerometer bias, gyro drift or azimuth misalignment and watch bounded and unbounded errors develop, and practise the chapter questions.
eatpl.in · General Navigation · Chapter 34
INS Lab
Align the INS, fly the route and read the CDU. Then add sensor errors and watch bounded and unbounded errors build up. A teaching model with typical numbers.
Fly
Errors
Practice
MSU
OFF STBY ALIGN NAV ATT REF
READY NAV BATT
ALERT BAT WARN
FROM/TO 0 1 WPT − 1 +
AUTO TK CHG HOLD (update)
The ten questions, then worked problems. Set up puts the lab in the matching state where there is one.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.