General Navigation · Chapter 36
Flight Management System
Lateral and vertical guidance from a computer, flown through a CDU: a miniature flight deck at your fingertips.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter 36 covers the flight management system: its principle and layout, the control and display unit, dual, independent and single modes, the performance and navigation data bases, the preflight pages, VNAV in the climb, cost index, LNAV in the cruise, the descent, accuracy and the CDU’s keys and annunciators.
Chapter roadmap
What this chapter covers
01
The system FMCs, CDUs, modes and the data base.
02
Preflight IDENT, POS INIT, RTE, PERF INIT.
03
In flight VNAV, cost index, LNAV, descent.
04
The CDU Keys, scratchpad, EXEC, lights.
Chapter 36 · Flight Management System
02
E-books by eatpl.in · © 2026 · Do not copy or distribute
Four parts: the system, its computers, control and display units, operating modes and data bases; the preflight pages; flying with the FMS, vertical navigation and cost index in the climb, lateral navigation in the cruise, the descent and accuracy; and the CDU itself, its keys, scratchpad, line select keys, EXEC and annunciators. Then practice questions and the FMS Lab.
01
The system
Computers that fly the route.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Principle of operation
Navigation, fuel efficiency, workload
Why $ Improve navigation , aid fuel efficiency and reduce crew workload .
LNAV Lateral guidance : the computer flies the aircraft along complex routes.
VNAV Vertical guidance : optimum cruise altitude, and the best auto-throttle and speed in climb and descent.
The CDU When not flying by hand the crew “fly” the aircraft through the FMS: a miniature flight deck with fingertip control.
Chapter 36 · Flight Management System
04
E-books by eatpl.in · © 2026 · Do not copy or distribute
Flight management systems are designed to improve navigation, aid fuel efficiency and reduce crew workload. Computers fly the aircraft along complex routes using lateral guidance, LNAV. Vertical guidance, VNAV, calculates optimum cruise altitudes and the best combination of auto-throttle control and speed in the climb and descent. Whenever the crew are not flying by hand, they use the FMS controls to fly the aircraft: in effect a miniature flight deck with fingertip control.
System layout
Two FMCs, two CDUs, many sensors
FMC : flight management computer, with its data base CDU : control and display unit, the crew’s interfaceFGS : flight guidance system (autopilot, auto-throttle)Inputs: GPS, IRS, DME, VOR, ADC , engine and fuel
A typical FMS FMC 1 data base FMC 2 data base CDU 1 CDU 2 FGS autopilot · auto-throttle GPS GPS IRS IRS DME DME VOR VOR ADC ADC ENG ENG FUEL FUEL sensors: positions, air data, engine and fuel data compare ✕ no cross-check FAILED DUAL MODE (normal) both FMCs process entries on both CDUs and compare INDEPENDENT MODE FMCs decoupled: not usual, no safety cross-check SINGLE MODE one FMC fails: the other flies the aircraft alone
Chapter 36 · Flight Management System
05
E-books by eatpl.in · © 2026 · Do not copy or distribute
A typical system has two flight management computers, each with its data base, two control and display units and the flight guidance system, fed by GPS, the inertial reference systems, DME, VOR, the air data computers and engine and fuel data. In dual mode, the norm, both FMCs independently process the pilot’s entries on both CDUs and compare the results to make sure the crucial information is consistent. They can be decoupled to give independent mode, which is not usual because there is no cross-check. If one FMC fails, the other can operate the aircraft on its own: single mode.
The control and display unit
The crew’s interface with the FMS
Interface Commands fully automatic , semi-automatic, or fully manual control with varying pilot involvement.
Two CDUs Either side of the centre console; the left is normally the master .
B747-400: a third, centre CDU, mainly for engineers.
Display A monochrome or colour CRT showing “pages” of data, plus a key panel .
Modes Dual : normal, cross-checked. Independent : no cross-check. Single : one FMC failed.
Chapter 36 · Flight Management System
06
E-books by eatpl.in · © 2026 · Do not copy or distribute
The CDU is the interface between the aircraft and the crew. It can command completely automatic control, or semi-automatic with varying degrees of pilot involvement, including full manual control. Two are usually fitted either side of the centre console, the left normally the master; the B747-400 adds a third on the centre console, mainly for engineering staff. Each has a monochrome or colour cathode ray tube on which pages of data are shown, and a key panel. The FMCs normally run in dual mode, comparing results; independent mode removes the cross-check; single mode follows an FMC failure.
The data base
Performance and navigation
Performance : drag and engine data, max and min speeds; less use of the Cruise Control ManualMaintenance can enter drag and fuel flow factors for each aircraft Navigation : navaids, airports, runways, SIDs, STARs, approaches, company routesTwo sets , each valid 28 days : crew selects the active set preflight
The FMC data base: two sections Performance data base aircraft drag and engine characteristics maximum and minimum speeds pitch and thrust commands computed replaces the Cruise Control Manual fuel flow v speed Maintenance factors DRAG +0.0 FF +1.5% Navigation data base navigation aids and airports runways SIDs, STARs and approaches company routes, airline items Most of what you’d read from the charts covers every area the aircraft normally flies Two sets of navigation data, each valid for 28 days (the AIRAC chart cycle) AIRAC 2610 01 OCT – 28 OCT 26 AIRAC 2611 29 OCT – 25 NOV 26 ACTIVE INACTIVE ACTIVE EXPIRED Updated by maintenance every 28 days: the new set is already loaded… …and on the changeover date the crew selects it as active during preflight
Chapter 36 · Flight Management System
07
E-books by eatpl.in · © 2026 · Do not copy or distribute
The information stored in the FMC is its data base, in two sections. The performance data base reduces the need to refer to the Cruise Control Manual and gives the FMC what it needs to compute pitch and thrust commands: drag and engine characteristics and maximum and minimum speeds; maintenance can refine it for each aircraft with drag and fuel flow factors. The navigation data base holds most of what you would otherwise read from charts: navaids, airports, runways, SIDs, STARs, approaches and company routes. The FMC holds two sets, each valid for 28 days to match the chart revision cycle; maintenance loads the new set in advance and the crew select the active set during preflight.
02
Preflight
Four pages, in order.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part two: preflight, the initial pages.
Initial actions
IDENT → POS INIT → RTE → PERF INIT
Power on: self-test , then the IDENT page Each page prompts the next (line select key 6R) POS INIT : clock check; position for the IRS alignmentRTE : origin, destination, flight number, company routePERF INIT : weights, fuel, reserves, cost index, cruise altitude
INIT REF RTE CLB CRZ DES DIR INTC LEGS DEP ARR HOLD PROG N1 LIMIT FIX PREV PAGE NEXT PAGE EXEC MSG OFST DSPY FAIL 1 2 3 4 5 6 7 8 9 . 0 +/− A B C D E F G H I J K L M N O P Q R S T U V W X Y Z SP DEL / CLR IDENT MODEL ENG RATING 737-800 26K NAV DATA ACTIVE AIRAC 2610 01OCT28OCT/26 29OCT25NOV/26 OP PROGRAM TEACH-1 DRAG/FF +0.0/+1.5 POS INIT> POS INIT LAST POS N5128.5W00027.6 REF AIRPORT EGLL GATE B44 UTC (GPS) SET IRS POS 0712.4Z □□□°□□.□ □□□□°□□.□ SET IRS HDG ---° ROUTE> RTE 1 ORIGIN DEST EGLL EDDF RUNWAY FLT NO 27R EAT101 CO ROUTE EGLLEDDF1 ACTIVATE> PERF INIT GR WT CRZ ALT 62.4 FL350 FUEL 9.8 ZFW 52.6 RESERVES COST INDEX 2.4 35 STEP SIZE ICAO N1 LIMIT> 1 IDENT page Self-test passed. Check the model, programme, drag/fuel-flow factors and the nav data base: is it in date? If not, select the in-date set. 1 2 POS INIT page Check the FMS clock against the aircraft clock (FDR, ETAs). Enter the airfield datum or gate position for the IRS alignment. 2 3 RTE page Enter origin and destination ICAO codes, flight number, and a company route if one exists. Activate, then EXEC. 3 4 PERF INIT page Gross weight, fuel, ZFW, reserves, cost index, cruise altitude, step size (and a B747 fifth engine). 4
Chapter 36 · Flight Management System
09
E-books by eatpl.in · © 2026 · Do not copy or distribute
On power-up the FMS runs a self-test and then shows the IDENT page, where the crew confirm the aircraft details and, importantly, the navigation data base in use and the date of changeover to the next; if it is out of date, the system says to change to the in-date set. Then POS INIT: check the FMS clock against the aircraft clock, since data go to the flight recorder against time and the FMC generates ETAs, and enter the airfield datum or gate position for the IRS alignment, often updated at the take-off point. Then RTE: origin and destination ICAO codes, flight number and a company route. Then PERF INIT: fuel, reserves, cruise altitude, cost index, even a B747 fifth-engine carriage.
The initial pages
What each page holds (Boeing types)
Page Contents IDENT aeroplane model and configuration · operational programme identifier · drag and fuel flow factors · navigation data base identifier and cycle POS INIT IRS position reference · IRS heading reference · GMT / UTC / time zone display RTE origin airport · destination airport · flight number · route activation PERF INIT gross weight · fuel quantity · zero fuel weight · fuel reserves · cost index · cruise altitude · spare (fifth) engine carriage (B747) · altitude step size
Chapter 36 · Flight Management System
10
E-books by eatpl.in · © 2026 · Do not copy or distribute
A summary of the initial pages on the Boeing types; companies may modify them. IDENT: model and configuration, operational programme, drag and fuel flow factors, navigation data base identifier and cycle. POS INIT: IRS position and heading references and the time. RTE: origin, destination, flight number and route activation. PERF INIT: gross weight, fuel, zero fuel weight, reserves, cost index, cruise altitude, fifth-engine carriage on the B747, and altitude step size.
03
In flight
VNAV, cost index, LNAV.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part three: flying with the FMS.
VNAV in 3D
Climb, cruise, descent: the vertical profile
Climb thrust within the SID’s speed and altitude constraints Then economy speed to the entered cruise altitude UNABLE NEXT ALT : select a speed giving a steeper climbEconomy cruise to T/D , then descent to the E/D
Chapter 36 · Flight Management System
12
E-books by eatpl.in · © 2026 · Do not copy or distribute
The VNAV profile the FMC commands is a climb at climb thrust within all the airspeed and altitude constraints of the SID in the active route, then a climb at economy speed to the entered cruise altitude. If the climb speed profile would violate an altitude constraint, UNABLE NEXT ALT is displayed, and the pilot must select a different speed giving a steeper climb angle. At cruise altitude the FMC commands economy cruise until the top of descent; long-range cruise or a selected speed may be entered until passing T/D.
Cost index
The speed that costs least overall
CI = aeroplane operating (time) cost per hour ÷ fuel cost per unitHigher speed: higher trip fuel cost, lower trip time cost Economy mode: the lowest operating cost for the CICI 0 : minimum trip fuel, maximum range cruise, low-speed descent
Cost index: trading fuel against time M .70 M .74 M .78 M .82 cruise speed → trip cost fuel cost ECON M .74 COST INDEX 0 ECON M .77 COST INDEX 30 ECON M .79 COST INDEX 60 ECON M .82 COST INDEX 100 time cost total = fuel + CI × time Cost index CI = operating cost / h fuel cost / kg (or lb) CI 0 minimum trip fuel: max range, slow descent Higher CI faster: more fuel, less time cost ECON lowest operating cost for the cost index LRC / SEL can be entered until passing T/D
Chapter 36 · Flight Management System
13
E-books by eatpl.in · © 2026 · Do not copy or distribute
Time-related cost is a function of the speed selected: the higher the speed in climb, cruise or descent, the higher the trip fuel cost but the lower the trip time cost. The cost index is the aeroplane’s operating cost per hour divided by the cost of fuel per pound or litre. Economy cruise gives the lowest operating cost for that cost index. A cost index of zero gives minimum trip fuel operation: maximum range cruise and a low-speed descent. Cost index changes, long-range cruise or a selected speed may be entered until passing the top of descent.
LNAV in 3D
Position from many sensors, great-circle steering
FMC position from IRS/INS , DME , VOR and other systems (GPS) Needs at least one IRS ; on the ground, IRS only Normally a combination of all IRS positions: errors grow with time Steers great-circle legs to the active waypoint
Chapter 36 · Flight Management System
14
E-books by eatpl.in · © 2026 · Do not copy or distribute
LNAV guidance is normally great-circle tracks between the waypoints of the active route, though stored procedures can command a constant heading, a track or a DME arc. The FMC works out present position from the IRS or INS, DME, VOR and the other navigation systems fitted, and uses it to generate steering commands along the active leg to the active waypoint. It needs position from at least one IRS; on the ground it uses the IRSs alone. The FMC position is normally a combination of the IRS positions, so it slowly accumulates errors, which show as differences between the individual IRS positions on the CDU. After an extended ground delay with a significant map error, realign the IRS and re-enter present position.
Descent and accuracy
From the arrival to 50 ft over the threshold
Descent path From the arrival’s speed and altitude constraints to the E/D : a waypoint with altitude and speed constraints at the FAF or runway threshold.
Approaches VFR and non-precision: the path ends 50 ft over the threshold .
Don’t descend below DH without visual contact. LNAV through the missed approach.
Accuracy Radial error rates below 0.05 nm/h are not uncommon; GPS improves it.
Operator skill and careful monitoring always matter.
Ground delay Significant map error after a long delay: realign the IRS and re-enter present position.
Chapter 36 · Flight Management System
15
E-books by eatpl.in · © 2026 · Do not copy or distribute
When an arrival is entered, the FMC calculates a descent path from the procedure’s speed and altitude constraints to the end of descent, a waypoint with an altitude and speed constraint at the final approach fix or runway threshold. For visual and non-precision approaches the path is built to 50 feet over the approach end of the runway, and the crew must not descend below decision height until they have adequate visual contact. LNAV guidance continues through a missed approach to the missed approach point and altitude. Radial error rates below 0.05 nautical miles per hour are not uncommon, and GPS improves this, but operator skill and careful monitoring are always deciding factors.
04
The CDU
Keys, scratchpad, EXEC.
E-books by eatpl.in · © 2026 · Do not copy or distribute
Part four: the control and display unit.
CDU key groups
Three groups of keys, four lights
Alphanumeric : characters appear in the scratchpad Function and mode : initialise, plan, modify; climb, cruise, descent pagesLine select keys : six each side of the screenAnnunciators: MSG , FAIL , DSPY , OFST
INIT REF RTE CLB CRZ DES DIR INTC LEGS DEP ARR HOLD PROG N1 LIMIT FIX PREV PAGE NEXT PAGE EXEC MSG OFST DSPY FAIL 1 2 3 4 5 6 7 8 9 . 0 +/− A B C D E F G H I J K L M N O P Q R S T U V W X Y Z SP DEL / CLR ACT RTE 1 LEGS 095° 64NM DVR 250/ 9850 090° 44NM KOK 290/FL214 099° 73NM BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> Alphanumeric keys type into the scratchpad Function and mode keys pages, flight plan changes, CLB/CRZ/DES Line select keys (12) scratchpad ↔ the line beside the key Annunciators MSG white: message pending FAIL amber: FMC failure DSPY white: not active page OFST white: parallel offset
Chapter 36 · Flight Management System
17
E-books by eatpl.in · © 2026 · Do not copy or distribute
The keys on the CDU fall into three groups: alphanumeric keys, which put characters into the scratchpad; function and mode keys, used to initialise the system, reach the flight planning functions and status, modify the flight plan, and select climb, cruise or descent information; and the twelve line select keys, six each side of the screen. There are four annunciators: MSG, white, a message is pending; FAIL, amber, an FMC failure; DSPY, white, the page shown is not related to the active leg or current performance mode; and OFST, white, a parallel offset is in use.
Scratchpad, LSK and EXEC
Type, line select, check, execute
Characters go to the scratchpad first A line select key moves it into the line beside it (or copies a line into an empty scratchpad) Changes to the active plan show as MOD and light the EXEC bar EXEC makes them active
INIT REF RTE CLB CRZ DES DIR INTC LEGS DEP ARR HOLD PROG N1 LIMIT FIX PREV PAGE NEXT PAGE EXEC MSG OFST DSPY FAIL 1 2 3 4 5 6 7 8 9 . 0 +/− A B C D E F G H I J K L M N O P Q R S T U V W X Y Z SP DEL / CLR ACT RTE 1 LEGS 095° 64NM DVR 250/ 9850 090° 44NM KOK 290/FL214 099° 73NM BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> B ACT RTE 1 LEGS 095° 64NM DVR 250/ 9850 090° 44NM KOK 290/FL214 099° 73NM BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> BU ACT RTE 1 LEGS 095° 64NM DVR 250/ 9850 090° 44NM KOK 290/FL214 099° 73NM BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> BUB ACT RTE 1 LEGS 095° 64NM DVR 250/ 9850 090° 44NM KOK 290/FL214 099° 73NM BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> MOD RTE 1 LEGS BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> ACT RTE 1 LEGS BUB .780/FL350 125° 86NM NTM .780/FL350 094° 88NM EDDF 160/ 500 RTE DATA> 1 Type BUB: it appears in the scratchpad 1 2 Line select 1L: the entry goes to line 1 2 3 MOD page; the EXEC bar lights (white) 3 4 Check it, then press EXEC: now active 4 Editing keys CLR tap: last character · hold 1 s: all · clears messages DEL writes DELETE; then line select the item +/− changes sign; also a hyphen PREV/NEXT page through; wraps around
Chapter 36 · Flight Management System
18
E-books by eatpl.in · © 2026 · Do not copy or distribute
Any alphanumeric key puts its character in the scratchpad. A line select key enters the scratchpad data into the line beside it; data entries are allowed only on lines next to the line select keys, and pressing one with an empty scratchpad copies that line into it. EXEC incorporates the displayed data into the active flight plan: it works when its annunciator bar is lit, the white bar showing that a valid set of data is displayed and may be made active. CLR clears the last character, or the whole entry if held for a second, and clears messages; DEL writes DELETE into the scratchpad, then line select the item to remove it.
Function and mode keys
What each key does
Key Use Key Use INIT REF start-up pages for the FMC and IRS; reference and maintenance pages LEGS detail of each leg, lateral and vertical RTE flight plan entries: the main way to alter the lateral plan HOLD plan or start a hold at a waypoint CLB climb modes; cruise altitude, speed/altitude restriction DIR INTC direct to any point, or intercept a leg CRZ cruise modes; optimum altitude, step-climb savings, turbulence N1 FIX range and bearing from present position to a fix DES descent modes; target speed, restriction, FPA, V/S, V/B PROG ETA, fuel at waypoints, radio tuning, wind, path errors N1 LIMIT active N1 limit, reduced climb N1 (MENU on the master CDU) DEP ARR departure and arrival procedures and runways
Chapter 36 · Flight Management System
19
E-books by eatpl.in · © 2026 · Do not copy or distribute
The function and mode keys: INIT REF for the start-up pages of the FMC and IRS and reference and maintenance pages; RTE for flight plan entries, the main way to alter the lateral plan; CLB, CRZ and DES for the climb, cruise and descent modes, with cruise altitude, optimum altitude, step-climb savings, turbulence penetration N1, target speeds and restrictions; N1 LIMIT for the active and reduced climb N1 limits, or MENU on the master CDU; DEP ARR for procedures and runways; LEGS for each leg’s detail; HOLD; DIR INTC to go direct or intercept a leg; FIX for range and bearing to a fix; and PROG for flight progress: ETA, fuel remaining, radio tuning, wind and path errors.
Summary
The FMS in six lines
Topic Remember Purpose Better navigation, fuel efficiency, less workload; LNAV lateral, VNAV vertical; CDU = miniature flight deck System Two FMCs and CDUs (left master); dual mode normal and cross-checked; independent: no cross-check; single: one failed Data base Performance (drag, engines, speeds; drag/FF factors) + navigation (navaids, airports, SIDs, STARs, company routes); 2 sets × 28 days Preflight IDENT (data base in date?) → POS INIT (clock, IRS position) → RTE (origin, destination, route) → PERF INIT (weights, CI, CRZ ALT) In flight VNAV: climb within SID constraints, ECON; UNABLE NEXT ALT; CI = time cost ÷ fuel cost, CI 0 = max range · LNAV: great circles, IRS + radio position CDU Scratchpad → LSK → EXEC (white bar) · CLR, DEL · MSG white, FAIL amber, DSPY white, OFST white
Chapter 36 · Flight Management System
20
E-books by eatpl.in · © 2026 · Do not copy or distribute
In summary: the FMS improves navigation and fuel efficiency and reduces workload; two FMCs normally run in dual mode; the data base has performance and navigation parts, the navigation data in two 28-day sets; preflight goes IDENT, POS INIT, RTE, PERF INIT; VNAV climbs within constraints then at economy speed set by the cost index; LNAV flies great circles using IRS and radio position; and on the CDU you type into the scratchpad, line select, and execute.
Questions 1–4
Practice questions (eatpl.in)
1. LNAV guidance between the waypoints of the active route is normally: (a) rhumb lines (b) great-circle tracks (c) constant headings (d) DME arcs
2. The FMC navigation data base: (a) is one set valid 14 days (b) holds two sets, each valid 28 days; the crew select the active set preflight (c) is updated by the crew in flight (d) holds only company routes
3. Cost index is: (a) fuel cost ÷ time cost (b) operating cost per hour ÷ fuel cost per unit (c) trip fuel ÷ trip time (d) a cruise Mach number
4. A cost index of zero gives: (a) maximum speed (b) long-range cruise (c) minimum trip fuel: maximum range cruise and a low-speed descent (d) minimum time
Chapter 36 · Flight Management System
21
E-books by eatpl.in · © 2026 · Do not copy or distribute
These are eatpl.in practice questions on the chapter.
Questions 5–8
Practice questions (eatpl.in)
5. On the ground the FMC calculates present position from: (a) DME/DME (b) GPS only (c) the IRS/INS only (d) VOR/DME
6. The order of the initial preflight pages is: (a) RTE, IDENT, PERF INIT, POS INIT (b) IDENT, POS INIT, RTE, PERF INIT (c) POS INIT, IDENT, RTE, PERF INIT (d) IDENT, RTE, POS INIT, PERF INIT
7. UNABLE NEXT ALT means: (a) the cruise altitude is too high (b) the climb speed profile would violate an altitude constraint; select a speed giving a steeper climb (c) the FMC has failed (d) the IRS is not aligned
8. In dual mode the FMCs: (a) are decoupled (b) each process the entries on both CDUs and compare the results (c) take turns (d) one stands by switched off
Chapter 36 · Flight Management System
22
E-books by eatpl.in · © 2026 · Do not copy or distribute
Practice questions 5 to 8.
Questions 9–12
Practice questions (eatpl.in)
9. For a non-precision approach the FMC path is built to: (a) the FAF at 1,500 ft (b) 50 ft over the approach end of the runway (c) the MDA (d) the touchdown zone at 0 ft
10. The OFFSET annunciator on the CDU: (a) amber: FMC failure (b) white: a parallel offset is in use (c) white: message pending (d) white: page not the active leg
11. The EXEC key works when: (a) the scratchpad is empty (b) its white annunciator bar is lit, showing valid data that may be made active (c) the FAIL light is on (d) any time
12. Maintenance can refine the performance data base by entering: (a) waypoints (b) drag and fuel flow factors (c) the cost index (d) the AIRAC cycle
Chapter 36 · Flight Management System
23
E-books by eatpl.in · © 2026 · Do not copy or distribute
Practice questions 9 to 12.
Answers
Answers with the reasoning
Q Ans Why 1 (b) Normally great circles; procedures can add headings, tracks, DME arcs 2 (b) Two 28-day sets; new set loaded by maintenance; crew selects 3 (b) Operating cost per hour ÷ fuel cost 4 (c) Minimum trip fuel: max range cruise, low-speed descent 5 (c) On the ground: IRS/INS only 6 (b) IDENT → POS INIT → RTE → PERF INIT 7 (b) Pilot selects a speed for a steeper climb 8 (b) Both process and compare; same output to both 9 (b) 50 ft over the threshold; not below DH without visual 10 (b) OFST white: parallel offset 11 (b) White bar: valid data ready to activate 12 (b) Drag and fuel flow factors
Chapter 36 · Flight Management System
24
E-books by eatpl.in · © 2026 · Do not copy or distribute
Answers with the reasoning.
A working CDU: IDENT, POS INIT, RTE, PERF INIT Type into the scratchpad, line select, EXEC Fly the route: LEGS, PROG, DIR INTC Change the cost index and watch the ECON speed and fuel Fail an FMC, find an out-of-date data base Open the FMS Lab →
INIT REF RTE CLB CRZ DES DIR INTC LEGS DEP ARR HOLD PROG N1 LIMIT FIX PREV PAGE NEXT PAGE EXEC MSG OFST DSPY FAIL 1 2 3 4 5 6 7 8 9 . 0 +/− A B C D E F G H I J K L M N O P Q R S T U V W X Y Z SP DEL / CLR PERF INIT GR WT CRZ ALT 62.4 FL350 FUEL 9.8 ZFW 52.6 RESERVES COST INDEX 2.4 35 STEP SIZE ICAO N1 LIMIT>
Chapter 36 · Flight Management System
25
E-books by eatpl.in · © 2026 · Do not copy or distribute
The FMS Lab has a working control display unit: complete the preflight pages, type into the scratchpad, line select and execute, fly the route with LEGS, PROG and direct-to, change the cost index, fail an FMC, and practise the questions.
eatpl.in · General Navigation · Chapter 36
FMS Lab
A working control display unit. Do the preflight pages, then fly the route. A teaching model: a small data base, Boeing-style pages, simplified performance.
CDU
Flight
Practice
eatpl.in practice questions. Set up puts the lab in the matching state.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.