IFR Training · Chapter 1
Attitude Instrument Flying How to fly with no outside horizon: the control and performance method, the instrument scan, and control of pitch, bank, power and trim.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to instrument flying. Inside cloud there is no horizon, and your body will lie to you about which way is up. The only way to stay in control is to read the instruments, believe them, and fly the aircraft through them. In this first lesson you will learn one simple idea that makes it possible: set an attitude, set the power, and the aircraft will give you the performance you want.
Roadmap
Attitude plus power equals performance The panel Six instruments, arranged in the basic T , replace the view through the windscreen.
The method Control instruments are set; performance instruments report the result.
The scan A selective radial scan centred on the attitude indicator, without fixation or omission.
The controls Small, smooth changes of pitch, bank and power , then trim .
Chapter 1 · Attitude Instrument Flying
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
We take it in four parts. First the panel: six instruments that replace the outside view. Then the method that ties them together, called control and performance. Then the scan, which is how your eyes move around the panel. And finally the controls themselves: pitch, bank, power and trim.
Why instruments
Without a horizon, your senses mislead you The balance organs of the inner ear sense acceleration , not attitude A slow, steady roll goes unnoticed; levelling the wings then feels like banking the other way: the leans Accelerating feels like pitching up; decelerating feels like pitching down Without visual reference, control is typically lost within a minute or two The cure: read the instruments, believe them, and ignore the sensation Keep head movements slow and small, especially in a turn N
Chapter 1 · Attitude Instrument Flying
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why do we need a special technique at all? Because the balance organs in your inner ear sense acceleration, not attitude. If the aircraft rolls slowly and steadily, you will not feel it. Then, when you level the wings, it feels as though you are banking the other way. Pilots call this the leans. In the same way, accelerating feels like pitching up and slowing down feels like pitching down. With no visual reference, an untrained pilot typically loses control in a minute or two. The cure is simple to say and takes practice to do: read the instruments, believe them, and ignore what your body is telling you.
The panel
Six instruments in the basic T Attitude indicator : pitch and bank at a glance, the centre of the TAirspeed indicator on the left, altimeter on the rightHeading indicator below the attitude indicatorTurn coordinator : rate of turn and balanceVertical speed indicator : rate and trend of climb or descentAdd the power instrument : RPM or manifold pressure 40 60 80 100 120 140 160 180 200 AIRSPEED KNOTS Airspeed 20 10 10 20 Attitude 0 1 2 3 4 5 6 7 8 9 ALT 5,000 Altimeter L R 2 MIN TURN Turn coordinator N 3 6 E 12 15 S 21 24 W 30 33 Heading indicator 20 15 10 5 0 5 10 15 20 VERT SPEED ×100 FPM Vertical speed The attitude indicator sits at the centre of the T
Chapter 1 · Attitude Instrument Flying
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the standard panel. At the top centre is the attitude indicator, which shows pitch and bank together and is the nearest thing you have to the real horizon. To its left is the airspeed indicator and to its right the altimeter. Directly below is the heading indicator. Those four form the basic T, and the layout is the same in almost every aircraft. The turn coordinator at the bottom left shows the rate of turn and whether the turn is balanced. The vertical speed indicator at the bottom right shows the rate of climb or descent, and just as usefully the trend. To these six, add your power instrument: the tachometer or manifold pressure gauge.
The method
Control instruments are set, performance instruments report Attitude + Power = Performance. For any phase of flight there is one attitude and one power setting that gives the performance you want.
Control instruments The attitude indicator and the power gauge . They respond immediately and directly to your hands, so these are the ones you set .
Performance instruments Airspeed, altimeter, vertical speed, heading, turn coordinator. They show what the aircraft is actually doing as a result.
Navigation instruments VOR, ADF, ILS, DME, GNSS. They show where the aircraft is in relation to a track or facility.
Performance instruments lag. Chase them directly and you will oscillate; change the attitude and let them follow.
Chapter 1 · Attitude Instrument Flying
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
The method has a simple slogan: attitude plus power equals performance. For every phase of flight there is one pitch attitude and one power setting that will give you the speed and the rate of climb or descent you want. So we split the instruments into groups. Control instruments are the attitude indicator and the power gauge. They respond instantly to your hands, and they are the ones you set. Performance instruments, such as airspeed, altimeter, vertical speed and heading, tell you what the aircraft is doing as a result. Navigation instruments tell you where you are. The key point is that performance instruments lag. If you chase them directly, you will oscillate. Change the attitude, and let them follow.
The four steps
Establish, trim, cross-check, adjust 1 · Establish Set the attitude on the attitude indicator and the power on the gauge for the performance you want.
2 · Trim Trim until the control pressures are neutral , so the aircraft holds the attitude hands-off.
3 · Cross-check Scan the performance instruments . Are speed, altitude and heading what you asked for?
4 · Adjust If not, make a small change to attitude or power on the control instruments, and repeat.
The cycle never stops. In smooth air it turns over every few seconds.
Chapter 1 · Attitude Instrument Flying
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
In practice the method becomes a four step cycle. One: establish. Set the attitude and the power you expect to need. Two: trim, until there is no pressure left on the controls and the aircraft will hold the attitude by itself. Three: cross check the performance instruments, to see whether you are getting the speed, altitude and heading you asked for. Four: adjust. If something is not right, make a small change on the control instruments, and go round again. This cycle never stops. It simply becomes quicker and smoother with practice.
The scan
Selective radial scan: out and back through the attitude indicator The eyes rest on the attitude indicator , the hub of the scan Glance out to one performance instrument, then back to the hub Which spokes you use most depends on the manoeuvre: that is the selective part Fixation : staring at one instrument while others driftOmission : leaving an instrument out, often the heading indicator or the powerEmphasis : relying on a favourite instrument instead of the right one40 60 80 100 120 140 160 180 200 AIRSPEED KNOTS Airspeed 20 10 10 20 Attitude 0 1 2 3 4 5 6 7 8 9 ALT 5,000 Altimeter L R 2 MIN TURN Turn coordinator N 3 6 E 12 15 S 21 24 W 30 33 Heading indicator 20 15 10 5 0 5 10 15 20 VERT SPEED ×100 FPM Vertical speed
Chapter 1 · Attitude Instrument Flying
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Cross checking needs a pattern, and the one we use is the selective radial scan. Your eyes rest on the attitude indicator, the hub of the wheel. From there you glance out to one performance instrument and come straight back to the hub, then out to another and back. Which instruments you visit most depends on what you are doing, and that is the selective part. Three errors spoil a scan. Fixation is staring at one instrument while the others drift away. Omission is leaving an instrument out altogether, very often the heading indicator. And emphasis is leaning on a favourite instrument instead of the one that really matters for the manoeuvre.
Pitch control
Pitch changes are measured in bar widths Pitch is set on the attitude indicator : the miniature aircraft against the horizon bar Make changes of half a bar, one bar or a degree or two, then wait Confirm on the altimeter and VSI ; the airspeed follows more slowly The VSI shows the trend first : use it to catch a deviation early Hold the yoke with fingertips . A tight grip hides the trim pressure Level flight attitude changes with speed: slower needs a higher nose N
Chapter 1 · Attitude Instrument Flying
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pitch is controlled on the attitude indicator, by placing the miniature aircraft a measured distance above or below the horizon bar. Think in bar widths. A change of half a bar or one bar is usually enough. Make the change, hold it, and then check the altimeter and the vertical speed indicator to see the result. The vertical speed indicator is especially useful because it shows the trend before the altimeter has moved very far. Hold the control column with your fingertips. A tight grip hides the trim pressures and makes smooth flying impossible. And remember that the level flight attitude is not fixed: at a lower speed the nose sits higher.
Bank control
Bank is set on the attitude indicator and checked on heading Read bank from the pointer at the top of the attitude indicator Wings level + ball centred = constant heading A heading that creeps means a few degrees of unnoticed bank Normal instrument turns are rate one: 3° per second Bank for rate one ≈ TAS ÷ 10, plus 7 . At 100 kt that is about 17° Never exceed the smaller of rate one or about 25° to 30° of bank on instruments N
Chapter 1 · Attitude Instrument Flying
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Bank is also set on the attitude indicator, using the pointer and the scale at the top of the instrument. With the wings level and the ball in the centre, the heading stays constant. So if the heading is creeping, you are carrying a few degrees of bank that you have not noticed. Normal turns on instruments are flown at rate one, which is three degrees per second, or a full circle in two minutes. A handy rule gives the bank angle needed: take one tenth of the true airspeed and add seven. At one hundred knots that is about seventeen degrees. On instruments we do not go beyond rate one, or about twenty five to thirty degrees of bank.
Power and trim
Power changes disturb pitch and yaw: expect them Know the approximate power setting for each phase and set it at once, then refine More power: the nose tends to rise and yaw left (clockwise propeller) Less power: the nose tends to drop and yaw right Hold the attitude with pressure, keep the ball centred with rudder Trim last : only when attitude and power are set and the speed has settledNever use the trim to change attitude. Trim removes pressure; it does not fly the aircraft 5 10 15 20 25 30 RPM ×100 Power: set, then refine 20 10 10 20 Attitude: hold it L R 2 MIN TURN Ball: step on it 40 60 80 100 120 140 160 180 200 AIRSPEED KNOTS Airspeed: settles last
Chapter 1 · Attitude Instrument Flying
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Power is the second control. Learn the approximate power setting for each phase of flight, set it straight away, and refine it afterwards. A power change disturbs the aircraft. With more power, the nose tends to rise and yaw to the left in an aircraft with a clockwise turning propeller. With less power, the nose tends to drop and yaw to the right. So as you move the throttle, hold the attitude with control pressure and keep the ball centred with rudder. Trim comes last, when the attitude and power are set and the speed has settled. Trim only removes pressure. Never use it to change the attitude.
Which instrument matters most
Primary and supporting instruments Phase of flight Pitch Bank Power Straight and level Altimeter (attitude indicator, VSI support)Heading indicator (attitude indicator, turn coordinator)Airspeed indicator Constant-speed climb or descent Airspeed indicator (attitude indicator, VSI)Heading indicator RPM / manifold pressure Level rate one turn Altimeter Turn coordinator (attitude indicator)Airspeed indicator Entering any manoeuvre Attitude indicator Attitude indicator RPM / manifold pressure
The primary instrument is the one that shows a constant reading when the manoeuvre is flown correctly.
Chapter 1 · Attitude Instrument Flying
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
A second way of looking at the panel is to ask, for each manoeuvre, which instrument tells you most directly whether you are doing it right. That one is called the primary instrument, and it is the one that should show a constant reading. In straight and level flight, the altimeter is primary for pitch, the heading indicator is primary for bank, and the airspeed indicator is primary for power. In a constant speed climb, the airspeed indicator becomes primary for pitch, because you hold the speed with the elevator. In a level rate one turn, the turn coordinator is primary for bank. And whenever you are entering a manoeuvre, the attitude indicator is primary for both pitch and bank.
Summary
What to carry into the cockpit and the exam Believe the panel The inner ear senses acceleration, not attitude. The instruments are right.
The slogan Attitude + power = performance. Set the control instruments; check the performance instruments.
The cycle Establish, trim, cross-check, adjust.
The scan Radial, through the attitude indicator. Avoid fixation, omission and emphasis.
Small changes Half a bar of pitch, a few degrees of bank. Rate one bank ≈ TAS/10 + 7.
Trim Trim last, to remove pressure. Never fly the aircraft with the trim.
Chapter 1 · Attitude Instrument Flying
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. Your senses cannot be trusted without a horizon, so believe the panel. Attitude plus power equals performance: set the attitude indicator and the power, then check the performance instruments. Work the cycle of establish, trim, cross check and adjust. Scan radially through the attitude indicator, and avoid fixation, omission and emphasis. Keep every change small. And trim last, to remove pressure, never to fly the aircraft.