IFR Training · Chapter 8
Reversal Procedures How to turn round and line up with the final approach: the 45°/180° and 80°/260° procedure turns, the base turn and the racetrack.
Outbound track 270° 45° leg · 1 min 180° turn Inbound 090° · descend when established Facility N © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Very often you arrive over an airfield beacon going the wrong way for the approach. You need to fly away from it, turn round, and come back lined up with the runway, losing height as you go, and all of it inside airspace that has been checked for obstacles. That is what a reversal procedure is for. There are three kinds, plus the racetrack, and each must be flown exactly as drawn.
Roadmap
Fly out, turn round, come back lined up Procedure turns The 45°/180° and the 80°/260° : a turn away, then a turn back.
Base turn A published outbound track and time, then one turn on to the inbound track.
Racetrack A hold-shaped pattern with a longer outbound leg, used to lose height .
The rules The ±30° entry sector , when you may descend, and what established means.
Chapter 8 · Reversal Procedures
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
First the two procedure turns, the forty five one eighty and the eighty two sixty. Then the base turn. Then the racetrack. And finally the rules that apply to all of them: how you may enter, when you may descend, and what it means to be established.
Procedure turn
The 45°/180° procedure turn Fly the outbound track from the facility or fix, descending as published At the published point or time, turn 45° away from the track, in the direction shown on the chart Fly straight for 1 minute from the start of the turn (categories A and B); 1 min 15 s for C, D and E Then turn 180° in the opposite direction You are now converging on the inbound track at 45° : intercept it The direction of the first turn is mandatory : the protected area lies on that side only Outbound track 270° 45° leg · 1 min 180° turn Inbound 090° · descend when established Facility N
Chapter 8 · Reversal Procedures
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The classic reversal is the forty five one eighty procedure turn. You fly outbound from the facility along the published track, descending as the chart allows. At the published point or time, you turn forty five degrees away from the track, in the direction shown on the chart. You then fly straight. The timing is one minute from the start of the turn for category A and B aircraft, and one minute fifteen seconds for the faster categories. Then you make a one hundred and eighty degree turn in the opposite direction. That leaves you converging on the inbound track at forty five degrees, ready to intercept it. The side on which you make the turn is not a choice. The obstacle protection lies on that side only.
Procedure turn
The 80°/260° procedure turn Fly the outbound track , as before Turn 80° away from the outbound track Then immediately turn 260° in the opposite direction There is no straight leg and no timing : it is one continuous manoeuvre In still air you roll out on, or very close to, the inbound track It takes less airspace and less time, but gives you less time to settle before the descent Outbound track 270° 80° left 260° right Inbound 090° Facility N
Chapter 8 · Reversal Procedures
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
The alternative is the eighty two sixty procedure turn. Again you fly outbound along the published track. Then you turn eighty degrees away from it, and as soon as you reach that heading, you reverse the turn and go two hundred and sixty degrees the other way. There is no straight leg and no timing: it is one continuous manoeuvre. In still air it brings you out on, or very close to, the inbound track. It uses less airspace and less time than the forty five one eighty. The price is that you have less time to settle down before the final descent, and a crosswind will displace you, so watch the track guidance carefully as you come round.
Base turn
The base turn: one turn on to the inbound track Leave the facility on a specified outbound track , which is not the reciprocal of the inbound Fly it for the published time , or to a DME distance Then make one turn to intercept the inbound track The outbound track and timing may differ for each aircraft category : read the right line of the chart Faster aircraft are usually given a track that diverges more, or a longer leg Tracking the outbound leg accurately is essential: the whole pattern hangs from it Outbound track 250° · 2 min Base turn Inbound 090° Facility N
Chapter 8 · Reversal Procedures
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
The base turn is the simplest of the three to fly. You leave the facility on a specified outbound track, which is not the reciprocal of the inbound track but diverges from it by a few degrees. You fly that track for a published time, or to a published D M E distance. Then you make one continuous turn to intercept the inbound track. Because faster aircraft need more room to turn, the chart often gives a different outbound track or a different time for each aircraft category. Make sure you read the line for your own category. And track the outbound leg accurately, because the whole pattern depends on it. If you start the turn from the wrong place, you will not roll out on the inbound track.
Racetrack
The racetrack: a hold with a job to do Start overhead the facility or fix, on or after an entry Turn 180° on to the outbound track Fly outbound for 1, 2 or 3 minutes as published, or to a DME distance, descending Turn 180° in the same direction back on to the inbound track Enter it like a hold, with two differences: the offset entry is limited to 1 min 30 s on the 30° heading, then you parallel the outbound track and a parallel entry must intercept the inbound track : it may not go direct to the facility 180° over the facility Outbound 1, 2 or 3 min 180° same direction Inbound 090° Facility N
Chapter 8 · Reversal Procedures
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The racetrack looks like a holding pattern, but it has a job to do: it lets you lose height and line up when there is not enough straight distance for a normal approach. You start overhead the facility. You turn one hundred and eighty degrees on to the outbound track, and fly outbound for one, two or three minutes as published, or to a D M E distance, descending. Then you turn one hundred and eighty degrees in the same direction back on to the inbound track. You normally enter a racetrack as you would a hold, with two differences. On an offset entry, the time on the thirty degree heading is limited to one minute thirty seconds, after which you turn to parallel the outbound track. And on a parallel entry you must intercept the inbound track; you may not fly direct to the facility.
Entry
You may only enter from within 30° of the outbound track A reversal procedure is protected only for aircraft arriving roughly along the outbound track Your track to the facility must be within ±30° of the outbound track For a base turn , the sector is widened if necessary to include the reciprocal of the inbound track Arriving from outside the sector? Enter the holding pattern first, then start the procedure from the hold Or follow an arrival route or radar vectors that bring you in from the right direction Only the racetrack and the hold may be entered from any direction Arriving on track 280° Facility N
Chapter 8 · Reversal Procedures
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Reversal procedures are designed for aircraft that arrive at the facility flying roughly along the outbound track. So there is an entry rule. Your track to the facility must be within thirty degrees either side of the outbound track of the procedure. For a base turn, the sector is widened if necessary so that it includes the reciprocal of the inbound track. If you are arriving from outside that sector, you may not simply turn on to the outbound track, because the turn would take you outside the protected airspace. Instead, enter the holding pattern at the facility first, and begin the procedure from the hold. The racetrack and the hold are different: they can be entered from any direction.
Descent
When may I descend, and what does "established" mean? Phase What you may do Limit Outbound Cross the facility and descend on the outbound track Not below the published outbound altitude During the turn Maintain the outbound altitude No further descent in the turn unless the chart shows it Inbound Descend to the next published altitude Only when established on the inbound track "Established": VOR or ILS Within half full-scale deflection VOR: 5° · Localiser: 1¼° "Established": NDB Within ±5° of the required bearing Read with wings level
Descending before you are established inbound is one of the classic causes of controlled flight into terrain.
Chapter 8 · Reversal Procedures
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
When may you descend? Outbound, once you have crossed the facility you may descend on the outbound track, but not below the published outbound altitude. During the turn, hold that altitude. Inbound, you may descend to the next published altitude only when you are established on the inbound track. And established has a precise meaning. For a V O R or an I L S localiser, it means within half full scale deflection. For an N D B, it means within five degrees of the required bearing. Until the needle says so, you stay where you are. Descending before being established inbound is one of the classic causes of accidents on instrument approaches, so never be tempted to start down early.
The inbound turn
The 60° check: am I going to roll out on track? Check your position when there are 60° left to turn on to the inbound heading On schedule: about 10° off the inbound track, with the VOR needle just coming alive Undershooting (needle still on the stop): roll out and hold an intercept headingOvershooting (needle nearly centred already): increase bank to the limit; be ready to turn through and re-interceptOn the ADF, use a relative bearing of about 60° , remembering the needle over-reads in the turn A tailwind on the outbound leg is the usual cause of an overshoot: expect it and turn early N 3 6 E 12 15 S 21 24 W 30 33 On schedule: bar just alive N 3 6 E 12 15 S 21 24 W 30 33 Undershoot: bar on the stop N 3 6 E 12 15 S 21 24 W 30 33 Overshoot: bar almost centred N 3 6 E 12 15 S 21 24 W 30 33 Rolled out on 090° inbound
Chapter 8 · Reversal Procedures
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
During the turn back on to the inbound track there is a simple check that tells you whether you will roll out on it. Make it when you have sixty degrees left to turn. If you are on schedule, you will be about ten degrees off the inbound track, and the V O R needle will just be coming alive. If the needle is still hard against the stop, you are going to undershoot: roll out, and hold an intercept heading until it moves. If the needle is already nearly centred, you are going to overshoot: increase the bank to the limit, and be ready to carry on through the track and come back to it from the other side. A tailwind on the outbound leg is the usual cause of an overshoot, so expect it.
The bigger picture
The five segments of an instrument approach Segment From → to Purpose Minimum obstacle clearance Arrival En route → IAF Leave the airway and descend 300 m (984 ft) Initial IAF → IF Manoeuvre to line up: includes reversals and racetracks 300 m (984 ft) Intermediate IF → FAF / FAP Slow down and configure, nearly level 150 m (492 ft) Final FAF / FAP → MAPt Descend to the minima, aligned with the runway Depends on the type of approach Missed approach MAPt onwardsClimb away to a safe altitude or hold Rises with the climb
IAF initial approach fix · IF intermediate fix · FAF final approach fix (non-precision) · FAP final approach point (precision) · MAPt missed approach point
Chapter 8 · Reversal Procedures
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us finish by placing the reversal procedure in the bigger picture. An instrument approach has up to five segments. The arrival segment brings you from the en route structure to the initial approach fix. The initial segment, from the initial approach fix to the intermediate fix, is where you manoeuvre to line up, and it is where reversal and racetrack procedures belong. The intermediate segment is nearly level, and is where you slow down and configure the aircraft. The final segment takes you from the final approach fix or point down to the minima. And the missed approach segment begins at the missed approach point. The obstacle clearance shrinks as you go: three hundred metres at first, then one hundred and fifty, and less on final.
Summary
What to carry into the cockpit and the exam 45°/180° Outbound, 45° away, 1 min from the start of the turn (1 min 15 s for C, D, E), 180° back.
80°/260° 80° away, then at once 260° the other way. No timing.
Base turn Published outbound track and time by category, then one turn inbound.
Racetrack 180° over the facility, 1 to 3 minutes outbound, 180° the same way.
Entry Within ±30° of the outbound track, or join the hold first.
Descent Inbound only when established: half scale on VOR or ILS, ±5° on NDB.
Chapter 8 · Reversal Procedures
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. The forty five one eighty: outbound, forty five degrees away, one minute from the start of the turn, then one eighty back. The eighty two sixty: eighty degrees away, then immediately two sixty the other way. The base turn: a published outbound track and time, then one turn inbound. The racetrack: one eighty over the facility, one to three minutes outbound, and one eighty the same way. Enter reversals only from within thirty degrees of the outbound track. And descend inbound only when established: half scale deflection on a V O R or I L S, or five degrees on an N D B.