IFR Training · Chapter 6
VOR Interceptions and Tracking A drill for joining any inbound or outbound course, choosing the intercept heading, leading the turn and holding the course in wind.
Intercept heading 220° Inbound course 280° VOR N © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air traffic control says: intercept the two eight zero inbound course. You know where the station is, but which way do you turn, and on to what heading? An interception is something you will do on every single instrument flight, so it needs to be a drill that you can run in a few seconds without getting lost. In this lesson we build that drill, first inbound, then outbound, and then we hold the course against the wind.
Roadmap
Orient, visualise, intercept, track The drill Six steps that work for every interception on every instrument.
Inbound From the desired course, through your QDM, and 30° further .
Outbound From your radial, through the desired course, and 45° further .
Tracking Lead the turn, then bracket to find the wind correction.
Chapter 6 · VOR Interceptions and Tracking
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
We begin with a six step drill. Then we apply it to an inbound course, with a quick rule for the intercept heading. Then to an outbound course, with a slightly different rule. And finally we look at how to lead the turn on to the course and hold it in a crosswind.
The drill
Six steps, the same every time 1 · Orient Tune, identify. Where am I? Centre the needle: TO for the QDM, FROM for the radial.
2 · Visualise Station at the centre of the heading indicator. Picture yourself and the desired course .
3 · Intercept heading Choose the heading that cuts the course at a sensible angle, and turn the shortest way on to it.
4 · Set the course Select the desired course on the OBS or HSI. Check the flag is what you expect.
5 · Lead Watch the needle come alive. Start the turn before it centres.
6 · Track Roll out on the course, then bracket for drift.
Do not rush step 2. Thirty seconds of thinking is cheaper than five minutes of flying the wrong way.
Chapter 6 · VOR Interceptions and Tracking
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the drill, and it is the same every time. One: orient. Tune and identify the station, and find out where you are. Two: visualise. Imagine the station at the centre of your heading indicator, and picture your own position and the course you want. Three: choose an intercept heading that cuts the course at a sensible angle, and turn the shortest way on to it. Four: set the desired course on the O B S or H S I, and check the flag is what you expect. Five: lead. Watch the needle come alive and begin your turn before it centres. Six: track. Roll out on the course and bracket for drift. Above all, do not rush the visualising. Disorientation is the real enemy here.
Inbound
From the desired course, through your QDM, and 30° further Find your present QDM : needle centred with TO On the compass card, start at the desired inbound course Move round to your present QDM , and carry on 30° further : that is the intercept heading Example: QDM 250° , desired inbound course 280° → heading 220° The interception angle is the difference plus 30°: here 60° Difference more than 60°? Fly at right angles to the inbound course instead Desired: 280° inbound You: radial 070°, QDM 250° Intercept heading 220° Inbound course 280° VOR N
Chapter 6 · VOR Interceptions and Tracking
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
For an inbound course there is a quick rule that gives the intercept heading straight from the compass card. First find your present Q D M, by centring the needle with a TO flag. Now, on the compass card, put your finger on the desired inbound course. Move round to your present Q D M, and keep going thirty degrees further. That is your intercept heading. In our example the Q D M is two five zero and the desired inbound course is two eight zero. From two eight zero, round to two five zero, and thirty more, gives two two zero. The interception angle is sixty degrees. If the difference between Q D M and course is more than about sixty degrees, simply fly at right angles to the inbound course until the needle comes alive.
Inbound on the instruments
What you see as the course comes in Set 280° : the flag shows TO , the needle is full scale right Heading 220° is left of the course, and the needle is to the right : you are closing The needle leaves the stop : you are within 10° of the course Judge the rate of movement and start the turn on to 280° Roll out with the needle centred, heading 280° On an HSI the picture is direct: the bar lies ahead and you are flying towards it N 3 6 E 12 15 S 21 24 W 30 33 TO 1 · OBS 280°, TO, full right N 3 6 E 12 15 S 21 24 W 30 33 HSI: bar ahead, heading 220° N 3 6 E 12 15 S 21 24 W 30 33 TO 2 · Needle alive: start the turn N 3 6 E 12 15 S 21 24 W 30 33 TO 3 · Centred on 280°
Chapter 6 · VOR Interceptions and Tracking
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now watch it happen on the instruments. You set two eight zero on the O B S. The flag shows TO, and the needle is hard over to the right. Your intercept heading of two two zero is to the left of the course, and the needle is on the right, so the course is ahead of you and you are closing with it. For a while nothing happens. Then the needle leaves the stop, which means you are within ten degrees of the course. Judge how fast it is moving, and start your turn on to two eight zero so that the needle centres just as you roll out. On an H S I the picture is even clearer: the deviation bar lies ahead of the aircraft symbol and you can see yourself flying towards it.
Outbound
From your radial, through the desired course, and 45° further Find your present radial : needle centred with FROM On the compass card, start at your present radial Move round to the desired outbound course , and carry on 45° further Example: on radial 110° , desired outbound course 080° → heading 035° Beyond about 5 NM from the station, 45° is normal; closer in, use less Select 080° and expect a FROM flag Desired: 080° outbound Radial 110° On radial 110° Intercept heading 035° Outbound course 080° VOR N
Chapter 6 · VOR Interceptions and Tracking
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
For an outbound course the rule is similar, but you start from where you are. Find your present radial by centring the needle with a FROM flag. On the compass card, put your finger on that radial, move round to the desired outbound course, and keep going forty five degrees further. That is your intercept heading. In the example you are on the one one zero radial and want the zero eight zero outbound course. From one one zero, round to zero eight zero, and forty five more, gives zero three five. Forty five degrees is the normal angle when you are more than about five miles from the station. Closer in, the radials are packed together, so use a smaller angle. Select zero eight zero, and expect a FROM flag.
Choosing the angle
How big should the interception angle be? Situation Suggested angle Why Inbound, QDM within 60° of the course Difference + 30° A steady closing rate that still arrives before the station Inbound, difference 60° to 90° 90° to the courseThe shortest way to the course line Outbound, more than about 5 NM out 45° Radials are far apart: you need a firm cut Outbound, close to the station 20° to 30° Radials are close together: the needle moves fast Radar vectors to final About 30° A gentle join that is easy to capture
Whatever the angle, the course must be intercepted before the station when inbound. If you are too close for that, fly to the station first and intercept outbound.
Chapter 6 · VOR Interceptions and Tracking
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
How big should the interception angle be? Inbound, if your Q D M is within sixty degrees of the course, the rule of thirty degrees beyond the bearing gives a steady closing rate. If the difference is between sixty and ninety degrees, fly at ninety degrees to the course, which is the shortest way to it. Outbound, use forty five degrees when you are more than about five miles from the station, and twenty to thirty degrees when you are close in, because the radials are packed together and the needle will move quickly. Radar controllers usually give you about thirty degrees on to a final approach course. Whatever angle you choose inbound, you must be on the course before you reach the station.
Leading the turn
Let the rate of needle movement set the lead A rate one turn through 60° takes 20 seconds : the needle must not centre before you finish The needle moves faster with a bigger interception angle, a higher ground speed, and when closer to the station Fast-moving needle: start turning as it comes off the stop Slow needle: wait until about half scale Or reduce the interception angle in steps as the needle moves in Overshot? Do not reverse steeply: take a small cut back from the other side N 3 6 E 12 15 S 21 24 W 30 33 Bar off the stop: 60° to turn N 3 6 E 12 15 S 21 24 W 30 33 Halfway round: half scale N 3 6 E 12 15 S 21 24 W 30 33 10° to go: nearly centred N 3 6 E 12 15 S 21 24 W 30 33 Rolled out on course
Chapter 6 · VOR Interceptions and Tracking
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The turn on to the course takes time. A rate one turn through sixty degrees takes twenty seconds, and the needle must not reach the centre before you have finished turning. So you lead the turn, and the amount of lead depends on how fast the needle is moving. It moves faster with a bigger interception angle, with a higher ground speed, and above all when you are close to the station. If the needle is moving fast, start turning as soon as it comes off the stop. If it is moving slowly, wait until about half scale. Another good technique is to reduce the interception angle in steps as the needle moves in. And if you do overshoot, do not reverse steeply. Take a small cut back from the other side.
Tracking
Bracketing: find the heading that holds the needle still Start with the course as the heading and watch the needle It drifts: the wind is from the side the needle moved towards Turn towards the needle by double the deviation and wait for it to centre Then take off half : that is your first wind correction Needle still creeping? Adjust by 2° or 3° and wait again On course, heading steady, needle still: you are tracking Course 270° Heading 270°: drifting Heading 280°: regaining Heading 275°: tracking VOR N
Chapter 6 · VOR Interceptions and Tracking
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Once on the course, you need the heading that keeps the needle still. Start by flying the course itself as a heading, and watch. In our example the needle drifts to the right, which tells you the course is now on your right and the wind is coming from the right. Turn towards the needle by about double the deviation, ten degrees here, and wait for the needle to centre again. Then take off half of that correction and hold what is left: heading two seven five. If the needle still creeps, adjust by two or three degrees and wait again. When the needle stays centred on a steady heading, you are tracking, and the difference between your heading and the course is the wind correction angle.
What goes wrong
Five classic interception errors Not identifying Navigating on the wrong station, or on one that is off the air. Always listen to the ident.
Reciprocal selected Reverse sensing: you turn away from the course. Top of the card ≈ heading.
Turning the long way Work out which way is shortest before you move the controls.
Chasing the needle Large heading changes for small deviations. Use small corrections and wait.
Forgetting the wind Rolling out on the course heading and drifting straight off. Bracket at once.
Losing the picture If unsure: wings level, hold heading, re-orient . Then act.
Chapter 6 · VOR Interceptions and Tracking
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Finally, the classic errors. One: not identifying the station, and navigating on the wrong one. Two: selecting the reciprocal course, getting reverse sensing, and turning away from the course. Three: turning the long way round on to the intercept heading. Four: chasing the needle with big heading changes, instead of making a small correction and waiting. Five: forgetting the wind, rolling out on the course heading and drifting straight off again. And six, the most serious: losing the mental picture. If you are ever unsure where you are, level the wings, hold your heading, and re orient yourself before you do anything else.
Summary
What to carry into the cockpit and the exam Drill Orient, visualise, intercept heading, set course, lead, track.
Inbound Desired course → through the QDM → 30° further. Flag TO.
Outbound Present radial → through the desired course → 45° further. Flag FROM.
Angle Over 60° difference inbound: fly at 90° to the course. Close in: smaller angles.
Lead Fast needle: turn as it leaves the stop. Slow needle: about half scale.
Bracket Double the deviation towards the needle, then hold half.
Chapter 6 · VOR Interceptions and Tracking
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. Use the same drill every time: orient, visualise, choose the intercept heading, set the course, lead the turn and track. Inbound, go from the desired course through your Q D M and thirty degrees further. Outbound, go from your radial through the desired course and forty five degrees further. Use smaller angles close to the station. Let the speed of the needle decide your lead. And bracket for the wind: double the deviation towards the needle, then hold half.