Arrow keys, the buttons or swipe to move between pages. The Lab is below the e-book.
Instruments · Chapter 15
Aircraft Magnetism The aircraft's own iron and electrics pull the compass off magnetic north; the compass swing measures that deviation, removes most of it and records the rest.
N MN deviation = A + B sin H + C cos H
Chapter fifteen deals with the aircraft's own magnetism. Steel parts, engines and electrical currents all create magnetic fields at the compass position, and these pull the magnets away from magnetic north. The resulting error is deviation, and unlike variation it changes as the aircraft changes heading. We will see where it comes from, splitting it into hard iron and vertical soft iron, and follow a single blue pole in the nose round the compass to discover why deviation follows sine and cosine curves, which gives us the coefficients A, B and C. Then we look at how deviation changes with magnetic latitude, when a compass swing is needed, how it is done, how the coefficients are calculated and removed, and how the residual deviation is recorded on the deviation card. Expect at least one calculation question on coefficients, so we will work several examples in full.
Deviation : angle between the magnetic meridian and the direction the compass needle actually lies (compass north )Named east (+) if the needle's north end lies east of magnetic north, west (−) if west Deviation east, compass least; deviation west, compass best Unlike variation, deviation changes with heading (and with magnetic latitude) Chain: compass heading ± deviation = magnetic ± variation = true MH = CH + deviation (E +, W −)
E S W MN CN Deviation EAST (+): compass least MH 090, dev +10 → CH 080 Deviation WEST (−): compass best MH 090, dev −10 → CH 100
Deviation is the angle between magnetic north and the direction in which the aircraft's compass actually points, which we call compass north. It is caused entirely by magnetism in the aircraft. If compass north lies to the east of magnetic north the deviation is easterly and counted as plus; if to the west, it is westerly and minus. The memory aid mirrors the one for variation: deviation east, compass least; deviation west, compass best. So a compass heading of ninety with five degrees east deviation means a magnetic heading of ninety-five. The full chain from compass to true is: compass heading, apply deviation to get magnetic, apply variation to get true. The crucial difference from variation is that deviation changes as the aircraft changes heading, because the aircraft's magnets turn with it.
Worked examples
Applying deviation Given Deviation Working Answer Compass 090° 5°W (−5) west: compass best, 090 − 5 MH 085° Compass 200° 3°E (+3) east: compass least, 200 + 3 MH 203° Magnetic 150° −4 CH = MH − dev = 150 + 4 CH 154° Compass 320°, var 5°W +2 MH 322, TH = 322 − 5 TH 317° Compass 358° +4 358 + 4 = 362 MH 002° True 100°, var 6°E, dev −2 MH 094, CH = 094 + 2 CH 096°
CH ± dev → MH ± var → TH (E +, W −)
Practise the chain, because it appears in navigation as well. Compass zero nine zero with five west deviation: west means compass best, so the compass figure is the bigger one, and magnetic is zero eight five. Compass two hundred with three east: east means compass least, so magnetic is two zero three. Going backwards from magnetic one five zero with deviation minus four, compass equals magnetic minus deviation, which is one five zero plus four, one five four. Now the full chain: compass three two zero, deviation plus two gives magnetic three two two; variation five west gives true three one seven. Watch the wrap at north: compass three five eight plus four is three six two, which is zero zero two. And the reverse chain: true one hundred, six east gives magnetic zero nine four; deviation minus two means the compass reads two more, zero nine six. Always write the signs down rather than doing it in your head.
The compass swing
What a compass swing is for Deviation is found by comparing the aircraft compass with magnetic heading from a high-quality landing (datum) compass Done on a site chosen for the purpose: the compass swinging base Aim 1: determine the deviations on a series of headings and calculate the coefficients Aim 2: correct (remove) as much deviation as possible Aim 3: record the residual deviation on a deviation card (or curve) The deviation found comes from hard iron and soft iron , resolved into coefficients
The basic way to find deviation is to compare what the aircraft compass says with the true magnetic heading of the aircraft, measured independently by a high-quality landing or datum compass. That comparison is made in a place chosen specifically for the purpose, the compass swinging base, which is far from anything magnetic. The swing has three aims, and examiners like to list them. First, to determine the deviation on a series of headings, which lets us calculate the coefficients. Second, to correct, that is remove, as much of the deviation as possible using the compensator and the compass mounting. Third, to record whatever is left, the residual deviation, so the pilot can allow for it, usually on a deviation card near the compass. The deviation we measure comes from the aircraft's hard iron and soft iron magnetism, and the next few slides show how those sources produce the familiar coefficients.
Where it comes from
Hard iron and soft iron in the aircraft Hard iron : steel that keeps its magnetism; permanent magnetism from manufacture, hammering, standing on one headingHard iron field turns with the aircraft; its strength does not depend on heading or latitude Soft iron : magnetised only while in a field: induced magnetism, changing with heading and with H and ZDC electrical circuits near the compass act like extra hard iron In the syllabus, soft iron means mainly vertical soft iron (VSI) , magnetised by Z H magnetic N HARD IRON permanent: turns with the aircraft SOFT IRON induced: lines up with the earth's field
Two kinds of magnetic material cause deviation. Hard iron is steel that keeps its magnetism once it has been magnetised. The aircraft picks up this permanent magnetism during manufacture, from hammering and riveting, from the earth's field while it stands on one heading for a long time, and from lightning. It behaves like a small fixed magnet that turns with the aircraft. Soft iron is material that becomes magnetised only while it sits in a field, and loses it when the field is removed. The earth's field induces magnetism in it, so the amount and direction depend on the aircraft's heading and on the local values of H and Z. Electrical cables carrying direct current near the compass produce a field too, which behaves like hard iron. For our syllabus the soft iron that matters is vertical soft iron, magnetised by the vertical component Z.
Hard iron
Components P, Q and R The permanent (hard iron) field at the compass is resolved into P (fore and aft), Q (athwartships) and R (vertical) Fixed for a given aircraft: they do not change with heading , but turn with the aircraft P deviates most on E and W : a sine curve, part of coefficient B Q deviates most on N and S : a cosine curve, part of coefficient C R has no effect while the aircraft is levelP Q R P: fore and aft → B Q: athwartships → C fixed to the aircraft: effect changes with heading
To analyse hard iron, we resolve its field at the compass into three components fixed to the aircraft: P along the fore-and-aft axis, positive forward; Q along the lateral axis, positive to starboard; and R vertically. Think about P on its own, like a magnet in the nose. Heading north, P points the same way as the earth's H and only strengthens it, so there is no deviation. Heading east, P points east and pulls the needle hard to one side: maximum deviation. South, no deviation again; west, maximum the other way. That pattern is a sine curve, and its peak is called coefficient B. Q, across the aircraft, gives the same kind of pattern shifted ninety degrees, a cosine curve: coefficient C. R acts vertically and has no effect in level flight. Vertical soft iron adds further fore-and-aft and athwartships parts that change with latitude.
Soft iron
Vertical soft iron (VSI) Soft iron is magnetised by the fields around it: mainly the earth's In the syllabus we consider only vertical soft iron , magnetised by Z Z grows with magnetic latitude, so VSI magnetism grows too; zero at the magnetic equator Z reverses across the magnetic equator, so VSI polarity reverses in the other hemisphere Its fore-and-aft part adds to B , its athwartships part to C R B B R Z (down) Z (up) Z = 0 northern hemisphere: lower end red magnetic equator: no VSI magnetism southern hemisphere: polarity reversed vertical soft iron induced by Z: changes with latitude, the same on every heading
Soft iron is magnetised by whatever field it sits in, and for an aircraft that is mainly the earth's field. The earth's field has a horizontal and a vertical component, but for our syllabus we consider only vertical soft iron, steel such as engine mountings or undercarriage members that runs up and down near the compass and is magnetised by Z. Watch the animation. In the northern hemisphere Z points down, the induced magnet lines up with it and the lower end becomes a red pole. At the magnetic equator Z is zero, so nothing is induced. In the southern hemisphere Z points up and the polarity reverses. Notice that a vertical member is magnetised the same way whatever the heading, so VSI changes with latitude, not heading. But the pole sits at a fixed place in the aircraft, so like P and Q it produces deviation that varies with heading: its fore-and-aft part adds to coefficient B and its athwartships part to coefficient C.
Following one pole
A blue pole in the nose Imagine the aircraft's magnetism as a single blue pole forward of the compass Heading N : the blue pole pulls the red end the same way as the earth: no deviation , directive force increased Heading E : it pulls the red end east: maximum easterly (+) deviation Heading S : it pulls against the earth: no deviation , directive force reduced Heading W : maximum westerly (−) deviation N E S W B blue pole in the nose 000°: no deviation H reinforced 090°: max EAST deviation (+) 180°: no deviation H weakened 270°: max WEST deviation (−) plot deviation against heading: a sine curve (coefficient B)
The easiest way to understand how aircraft magnetism produces deviation is to imagine all of it concentrated in one blue pole somewhere forward of the compass, in the nose. Blue attracts red, so the red end of the needle is pulled towards the nose. Follow the animation. On north the blue pole lies due north of the compass, the same direction as the earth's blue pole, so the two pull together: there is no deviation, and the directive force is actually stronger than the earth's alone. Turning to east, the blue pole is now east of the compass and drags the red end eastwards: maximum easterly, or plus, deviation. On south the blue pole pulls along the same line as the earth but in the opposite direction, so again no deviation, but now the directive force is weaker than the earth's. On west it drags the red end west: maximum westerly, minus, deviation. Plot those values against heading and you get a sine curve.
Following one pole
Blue pole forward: heading by heading Compass heading Deviation Directive force at compass 000° zero maximum (earth + pole)045° east, some more than the earth's 090° east, maximum (+) about the earth's 135° east, some less than the earth's 180° zero minimum (earth − pole)225° / 270° / 315° west, some / maximum (−) / some less / about equal / more
Blue pole aft: the same pattern reversed (negative sine, max west on 090°, minimum directive force on 000°).
Here is the same story as a table. With the blue pole forward, deviation is zero on north, builds up through north-east to a maximum easterly value on east, falls through south-east to zero on south, then becomes westerly, with its maximum on west, and returns to zero on north. The directive force column is also worth knowing. On north the pole helps the earth, so the needle is held more firmly than by the earth alone; on south it opposes the earth and the needle is held less firmly; on east and west the pole acts at right angles, so the force along the meridian is roughly the earth's. If the blue pole were behind the compass instead, everything reverses: the curve is a negative sine, deviation is maximum westerly on east, and the directive force is greatest on south and least on north. Either way, a deviation that varies as the sine of the heading is called coefficient B.
Coefficients
Coefficient B: the sine curve Magnetism resolved along the fore-and-aft axis gives deviation ∝ sin (heading) Blue pole forward: +B , max east on 090°, max west on 270° Blue pole aft: −B , the curve is inverted Zero on 000° and 180°: B has no effect on N and S Sources: hard iron P plus the fore-and-aft part of VSI (cZ ) deviation due to B = B × sin (compass heading)
000 090 180 270 360 E + W − compass heading +B: blue pole forward (sine) −B: blue pole aft blue pole fwd
Coefficient B is the part of deviation produced by magnetism resolved along the fore-and-aft axis of the aircraft. As we just saw with the blue pole in the nose, it gives deviation proportional to the sine of the compass heading. The orange marker runs along the solid curve: zero on north, maximum easterly on east, zero on south, maximum westerly on west. The value of B is the height of that peak in degrees. If the effective blue pole were aft of the compass, B would be negative and the curve would be the dashed one, with westerly deviation on east. Two sources contribute to B: the hard iron component P, which is constant at a given place, and the fore-and-aft component of vertical soft iron, often written c times Z, which changes with latitude. Because B is zero on north and south and largest on east and west, it is measured, and later corrected, on an easterly or westerly heading.
Coefficients
Coefficient C: the cosine curve Magnetism resolved along the lateral (wing) axis gives deviation ∝ cos (heading) Blue pole towards the right wing : +C , max east on 000°, max west on 180° Towards the left wing: −C Zero on 090° and 270°: C has no effect on E and W Sources: hard iron Q plus the athwartships part of VSI (fZ ) deviation due to C = C × cos (compass heading)
000 090 180 270 360 E + W − compass heading +C: blue pole to the right (cosine) −C: to the left blue pole right
Now put the effective blue pole out towards the right wing instead. On north the right wing points east, so the blue pole pulls the red end east: maximum easterly deviation. On east the wing points south, along the meridian, so no deviation. On south the wing points west: maximum westerly. On west, zero again. That is a cosine curve, and its peak value is coefficient C. With the pole towards the left wing, C is negative and the curve is inverted. The sources are the athwartships hard iron component Q and the athwartships part of vertical soft iron, written f times Z. Because C is greatest on north and south and zero on east and west, it is measured and corrected on a northerly or southerly heading. In a real aircraft both B and C are present at once, and the deviating forces may come from several places; the swing does not care where they are, it simply measures the combined effect.
The deviation formula
Coefficients A, B and C together A : the same on every heading; mainly misalignment of the compass or lubber line (a mechanical error)B : B sin H, maximum on 090° and 270° , zero on 000° and 180°C : C cos H, maximum on 000° and 180° , zero on 090° and 270°Total deviation on compass heading H is their sum Signs: + = easterly deviation, − = westerly dev = A + B sin H + C cos H
000 090 180 270 360 +6 E −6 W compass heading A B sin H C cos H total dev = A + B sin H + C cos H
Deviation on any heading can be described, to a good approximation, by three coefficients. Coefficient A is constant on every heading. Most of it is mechanical: the compass or its lubber line is not exactly aligned with the aircraft's fore-and-aft axis. Coefficient B varies as the sine of the compass heading: it is largest on east and west and zero on north and south, and it comes from the fore-and-aft hard iron P plus some vertical soft iron. Coefficient C varies as the cosine: largest on north and south and zero on east and west, coming from Q plus vertical soft iron. The total deviation is A plus B sine H plus C cos H. The graph builds up the total, in navy, from A equals plus one, B equals plus four and C equals plus two. We will use these same numbers in the worked example.
Change of magnetic latitude
Why deviation changes with latitude Deviation depends on the deviating force compared with H , the directive force Hard iron : force fixed, H shrinks towards the poles: max deviation ∝ 1/H ; same sign in both hemispheresVSI : force ∝ Z, so max deviation ∝ Z/H = tan dip : grows towards the poles and changes sign across the magnetic equatorZ has no effect on hard iron deviation So coefficients found at one latitude are wrong at another : swing after a large change of latitude tan dip = Z / H
magnetic equator S N max deviation hard iron ∝ 1/H same sign everywhere VSI ∝ tan dip changes sign
A compass swing is done at one place, but the aircraft does not stay there. The size of any deviation depends on how strong the deviating force is compared with H, the force trying to hold the needle on magnetic north. Hard iron produces a fixed force, but H gets weaker as we go towards the magnetic poles, so hard iron deviation grows as one over H. Its sign stays the same in both hemispheres. Vertical soft iron is different: its magnetism is induced by Z, so its force grows with Z while H shrinks, making the deviation proportional to Z over H, which is the tangent of the dip. Z reverses direction across the magnetic equator, so this deviation changes sign too. The result is that coefficients B and C measured at one latitude are wrong at a very different one, which is why a large change of magnetic latitude calls for a new swing.
Worked examples
Deviation at a new latitude Source At the swing New place New max deviation Hard iron 3°, H = 30 µT H = 15 µT 3 × 30/15 = 6° Hard iron 4°E, H = 20 µT H = 40 µT 4 × 20/40 = 2°E Hard iron 2°E (NH) same H in the SH 2°E (same sign)VSI 2°, dip 45° (tan 1) dip 60° (tan 1.73) 2 × 1.73 ≈ 3.5° VSI 2°E, dip 45°N dip 45°S 2°W (sign reverses)VSI any magnetic equator 0°
hard iron: dev ∝ 1/H VSI: dev ∝ tan dip
Let's put numbers on it, treating the deviations as small so they are simply proportional. A hard iron deviation of three degrees found where H is thirty microtesla becomes six degrees where H is only fifteen, because the same force now acts against half the directive force. Going the other way, four degrees east where H is twenty becomes two degrees east where H is forty. Hard iron does not care about Z, so a hard iron deviation keeps its sign in the other hemisphere. Vertical soft iron scales with the tangent of dip. Two degrees at forty-five degrees of dip, where the tangent is one, becomes about three and a half degrees where the dip is sixty, since tan sixty is about one point seven three. Take the same aircraft to forty-five degrees of dip in the southern hemisphere and Z has reversed, so two east becomes two west. At the magnetic equator, Z is zero and VSI deviation disappears altogether.
When to swing
Occasions for a compass swing When compass or remote compass components are installed or replaced ; whenever accuracy is in doubt After a maintenance inspection if the schedule requires it After significant modification, repair or replacement of magnetic material, or of radio / electrical systems After a lightning strike or significant shock ; when carrying unusual ferromagnetic payloads After a move to a new area involving a large change of magnetic latitude After long-term storage standing on one heading
A swing is required whenever the magnetic situation at the compass may have changed. That includes fitting a new compass or remote compass component, and a new aircraft. The maintenance schedule calls for swings at set intervals, and you should ask for one whenever the compass is suspected of being inaccurate. Any modification, repair or replacement involving magnetic material, or changes to electrical equipment and wiring near the compass, can alter the deviation. So can a lightning strike or a severe shock such as a heavy landing, because they can change the permanent magnetism of the structure. Carrying unusual ferromagnetic cargo, moving to a very different magnetic latitude, and standing on one heading for a long time, which slowly magnetises the hard iron along that direction, are the other classic occasions.
The compass swing
Swinging the aircraft Only on the compass swinging base : a surveyed site away from hangars, buildings, cables and other aircraft Aircraft in its normal flight attitude , engines running if practicable, electrical and radio equipment on Magnetic heading measured with a landing (datum) compass sighted along the fore-and-aft axis On each heading: deviation = MH − CH Readings on the cardinal headings (and usually the intercardinals), aircraft settled before each reading N E S W MH 000 CH 002 dev −2 MH 090 CH 086 dev +4 MH 180 CH 179 dev +1 MH 270 CH 274 dev −4 engines running, electrics ON, flight attitude landing compass
A swing is carried out on a compass base, a level area that has been magnetically surveyed and is far enough from hangars, buildings, buried cables, vehicles and other aircraft that nothing but the aircraft itself disturbs the field. The aircraft is put in its normal flight attitude, so a tailwheel aircraft has its tail raised on a trestle, and as far as possible everything that is on in flight is on: engines running, electrical services and radios switched on. The true magnetic heading of the aircraft is measured with a landing compass, also called a datum compass, a high-quality sighting compass set up on a tripod and sighted along the aircraft's fore-and-aft axis. On each heading the aircraft compass is read once everything has settled. The deviation is magnetic heading minus compass heading. The four cardinal headings are the minimum; usually the intercardinals are taken as well.
Worked example
Finding A, B and C from a swing Compass heading Landing compass (MH) Deviation (MH − CH) 000° (N) 003° +3° 090° (E) 095° +5° 180° (S) 179° −1° 270° (W) 267° −3°
A = (3 + 5 − 1 − 3)/4 = +1°
B = (E − W)/2 = (5 − (−3))/2 = +4°
C = (N − S)/2 = (3 − (−1))/2 = +2°
Here is a full example. On compass north the landing compass gave three, so deviation is plus three. On compass east, ninety-five against ninety, plus five. On south, one seven nine against one eight zero, minus one. On west, two six seven against two seventy, minus three. Coefficient A is the average of all the deviations: three plus five minus one minus three is four, divided by four is plus one. Coefficient B is half of east minus west: five minus minus three is eight, halved is plus four. Coefficient C is half of north minus south: three minus minus one is four, halved is plus two. Check: on east the formula gives A plus B, five, which matches. You can also predict other headings: on zero four five, one plus four times nought point seven plus two times nought point seven, about plus five.
Worked example
Using the coefficients Compass heading A + B sin H + C cos H Deviation Magnetic heading 045° 1 + 4(0.71) + 2(0.71) ≈ +5.2° ≈ 050° 135° 1 + 4(0.71) − 2(0.71) ≈ +2.4° ≈ 137° 180° 1 + 0 − 2 −1° 179° 225° 1 − 4(0.71) − 2(0.71) ≈ −3.2° ≈ 222° 315° 1 − 4(0.71) + 2(0.71) ≈ −0.4° ≈ 315°
A = +1, B = +4, C = +2 (sin 45 = cos 45 ≈ 0.71)
Once you have the coefficients you can predict the deviation on any heading. Using the same aircraft, A plus one, B plus four, C plus two. On compass zero four five, sine and cosine are both about nought point seven one, so deviation is one plus about two point eight plus about one point four, roughly plus five point two, giving a magnetic heading of about zero five zero. On one three five the cosine is negative: one plus two point eight minus one point four, about plus two point four. On one eight zero the sine is zero and the cosine minus one, so one minus two, minus one degree. On two two five both are negative, one minus two point eight minus one point four, about minus three point two. On three one five the sine is negative and the cosine positive, about minus nought point four. Notice how quickly the deviation changes round the compass. That is exactly why we try to remove B and C rather than live with them.
Compensating
Removing A, B and C A (mechanical): loosen the compass, or the remote compass detector unit , and rotate it by the amount of AB : on an easterly or westerly heading, turn the B micro-adjusterC : on a northerly or southerly heading, turn the C micro-adjusterTarget reading: E: CH + B; W: CH − B; N: CH + C; S: CH − C Then a check swing on 8 (or 12) headings gives the residual deviations 24 W 30 33 N 3 6 E 12 15 S 21 24 W 30 33 N 3 6 E B C Heading E (090) Turn B: card reads CH + B = 094 Then a check swing gives the residuals
With the coefficients known, we remove as much as possible. Coefficient A is mechanical, so we correct it mechanically: slacken the compass mounting, or the remote detector unit, and turn it by the amount of A. Coefficients B and C are removed with the compensator, which contains small adjustable magnets called micro-adjusters, one set for B and one for C. B is corrected on an easterly or westerly heading, where it has its full effect, and C on a northerly or southerly heading. In our example, heading east with A already removed, the compass reads ninety but the deviation is plus four, so the magnetic heading is ninety-four. We turn the B adjuster until the compass reads ninety-four. On west we would set compass heading minus B, and similarly for C on north and south. A check swing then measures what is left, the residual deviation.
Worked example
Correcting step by step Step Aircraft on Compass reads Adjust until it reads Remove A (+1) any heading 1° low everywhere rotate compass: readings +1° Remove B (+4) CH 090° 090° 094° (CH + B)… or on west CH 270° 270° 266° (CH − B)Remove C (+2) CH 000° 000° 002° (CH + C)… or on south CH 180° 180° 178° (CH − C)Check swing 8 or 12 headings record residuals deviation card
Here is the correction sequence for our example aircraft with A plus one, B plus four and C plus two. A is mechanical, so we loosen the compass mounting and rotate the compass until every reading has increased by one degree, which takes out the constant error. Next B. With the aircraft on compass zero nine zero, the B deviation is plus four, so the magnetic heading is zero nine four; turn the B micro-adjuster until the compass reads zero nine four. If you happened to be on west instead, B sin two seven zero is minus four, the magnetic heading is two six six, and you adjust to read two six six. C is done the same way on north or south: on compass north, set it to read zero zero two; on south, one seven eight. You correct each coefficient once, on one of its two headings. Finally, a check swing on eight or twelve headings measures the residual deviations, which go on the deviation card.
The result
Deviation card and accuracy limits Residual deviations go on a deviation card (or a graph / curve) placed next to the compass Usual layout: "For" magnetic heading, "Steer" compass heading Example: residual on 090° is 1°W (−1) : CH = MH − dev = 090 − (−1) = 091° Limits after compensation: direct reading compass ±10° , remote indicating compass ±1° Card shows date and place of the swing and who carried it out COMPASS DEVIATION CARD FOR (MH) STEER (CH) 000 002 045 046 090 091 135 135 180 179 225 224 270 268 315 314 Swung: date · place · signed 24 W 30 33 N 3 6 E 12 15 S 21 24 W 30 33 N 3 6 E residual deviations Limits direct reading ±10° remote indicating ±1°
After the check swing the residual deviations are written on a deviation card, which is mounted next to the compass. A common layout gives, for each magnetic heading you want to fly, the compass heading you must steer. The conversion is the usual one: compass heading equals magnetic heading minus deviation, remembering that easterly deviation is plus. So if the residual on east is one degree west, minus one, then for zero nine zero magnetic you steer zero nine one by compass. Always work the sign out carefully; it is the most common slip in exam questions. The textbook limits for residual deviation after compensation are ten degrees for a direct reading compass and one degree for a remote indicating compass. The card also records the date and place of the swing and is signed by whoever carried it out.
Exam traps
Where marks are lost Deviation: east compass least, west compass best ; MH = CH + dev (E +) Coefficient A is mainly a misaligned lubber line , corrected by rotating the compass, not by a micro-adjuster B corrected on E or W ; C on N or S . Don't swap themHard iron deviation is not caused by Z; it grows as H falls but keeps its signVSI varies with latitude (tan dip), not with heading, and reverses sign across the magnetic equatorSwing only on the compass base , with engines and electrics as in flight; limits ±10° / ±1°
These are the points that cost marks. First the sign rule: easterly deviation is plus and the compass reads less, westerly is minus and the compass reads more, and magnetic heading equals compass heading plus deviation. Second, coefficient A is mainly mechanical, a misaligned lubber line or compass, so it is corrected by rotating the compass or the detector unit in its mounting, not with the micro-adjusters. Third, B is corrected on east or west where it has its full effect, C on north or south; candidates often swap them. Fourth, hard iron magnetism is permanent and does not depend on Z, though its deviation grows as H shrinks; it keeps the same sign everywhere. Fifth, vertical soft iron magnetism varies with latitude, as the tangent of dip, but not with heading, and it reverses across the magnetic equator. Finally, a swing is done only on the compass base, in flight configuration, and the limits are ten degrees and one degree.
Summary
What to take into the exam Deviation: magnetic vs compass north; E +, compass least; W −, compass best ; changes with heading and latitude Swing aims: determine, correct, record ; landing compass on the compass base, flight configuration Hard iron P, Q, R (fixed); VSI from Z; blue pole forward → +B (sine) , to the right → +C (cosine) dev = A + B sin H + C cos H ; A = mean, B = (E − W)/2 , C = (N − S)/2 Correct A by rotating the compass; B on E/W, C on N/S; check swing on 8–12 headings; card Hard iron dev ∝ 1/H (same sign); VSI ∝ tan dip (sign reverses); limits ±10° DRC, ±1° remote
To sum up chapter fifteen. Deviation is the angle between magnetic north and compass north: easterly is plus and the compass reads least, westerly is minus and the compass reads best, and it changes with heading and with latitude. A compass swing aims to determine the deviation, correct as much as possible and record the remainder, using a landing compass on the compass base with the aircraft in flight configuration. Hard iron gives fixed components P, Q and R; vertical soft iron is induced by Z. A blue pole forward gives a positive sine curve, coefficient B; a pole towards the right wing gives a positive cosine curve, coefficient C. The total is A plus B sine H plus C cos H, with A the mean, B half of east minus west and C half of north minus south. A is corrected mechanically, B on east or west, C on north or south, then a check swing produces the card. Remember the latitude rules and the limits.