Aircraft Instruments · Chapter 40
EICAS and ECAM in detail: components, display units, colours, display modes, control panels, alert levels, cancel and recall, failure behaviour, standby engine indicator, maintenance and test functions, ECAM modes and synoptics, and a side-by-side comparison.
Exclusive study material prepared by eatpl.in
Arrow keys, the buttons or swipe to move between pages. The Lab is below the e-book.
Instruments · Chapter 40
EICAS and ECAM: engine data, crew alerts and system pictures on electronic displays.
Two philosophies
EICAS
EICAS displays
EICAS colours
| Colour | Used for |
|---|---|
| White | All scales, normal operating range of pointers, digital readouts |
| Red | Warning messages, maximum operating limit marks and readouts |
| Green | Thrust mode readout; selected EPR/N1 marks and target cursors |
| Blue | Testing of the system only |
| Yellow (amber) | Caution and advisory messages, caution limit marks, readouts |
| Magenta | In-flight engine start, cross-bleed messages |
| Cyan | Names of parameters (N1, oil pressure, TAT …), status marks or cues |
EICAS display modes
| Mode | Selected | Shows |
|---|---|---|
| Operational | Normal; by the crew | Engine operating data and alerts needing crew action in flight; upper display, lower blank until selected |
| Status | By the crew (STATUS switch) | Dispatch readiness: flight control positions, sub-system data, status messages (linked to the MEL); lower display |
| Maintenance | Maintenance panel, ground only | Five formats for troubleshooting and testing; lower display; not available in flight |
Modes 1 and 2 from the display select panel; mode 3 from the maintenance panel, for engineers only.
Status mode
EICAS controls
Alert messages
Managing messages
Failures
Backup
Maintenance
ECAM
ECAM display modes
| Mode | Selection | What it shows |
|---|---|---|
| Flight phase-related | Automatic (normal) | Pages for the current phase: pre-flight, take-off, climb, cruise, descent, approach, after landing |
| Advisory (mode and status) | Automatic | Memo and status: aircraft condition summary, autoland capability, inoperative systems |
| Failure-related | Automatic: highest priority | Warning and corrective action (left) + affected system synoptic (right) |
| Aircraft system display | Manual (system push buttons) | Any of 12 system synoptics for routine checks; status if no warning |
Exam pairing: ECAM = three automatic + one manual mode; EICAS = operational, status, maintenance.
Normal operation
Failure-related mode
Advisory mode
ECAM controls
ECAM testing
Side by side
| Feature | EICAS (Boeing) | ECAM (Airbus) |
|---|---|---|
| First fitted | B757 / B767 | A310 (A320 onwards with engine display) |
| Display units | Upper + lower | Left + right (A310) / upper + lower (A320) |
| Engine data | On the displays, primary full time | A310: conventional gauges; A320: upper display |
| Modes | Operational, status, maintenance | Phase-related, advisory, failure-related (auto) + manual system display |
| Alert presentation | Message lists: A red, B amber, C amber indented | Warning + checklist actions + synoptic; underlined or boxed titles |
| Clearing | CANCEL / RECALL (warnings never cancelled) | CLR / RCL / STS |
Watch out
Summary