Aircraft Instruments · Chapter 16
The gyro-magnetic (slaved) compass: why it is needed, the slaving loop, rapid synchronisation, the detector unit and flux valve, rotor–stator comparison, the heading indicator, modes, annunciator, levelling, selsyn outputs and larger multi-indicator, coupled and dual systems.
Exclusive study material prepared by eatpl.in
Arrow keys, the buttons or swipe to move between pages. The Lab is below the e-book.
Instruments · Chapter 16
A gyro gives a steady heading, a flux valve far from the cockpit keeps it pointing at magnetic north, and the result can be sent anywhere in the aircraft.
Why remote?
The solution
Building blocks
Steady heading
Design choice
In a turn
Switch-on
Detector unit
Flux valve principle
Flux valve principle
Flux valve construction
Error signal comparison
Precession amplifier
Heading indicator
Operation as a DGI
| Mode | Flux valve | Use |
|---|---|---|
| SLAVED (MAG) | Connected; gyro precessed at ≈3°/min | Normal operation |
| FREE (DG) | Disconnected; no rotor/stator comparison: acts as a DGI | Flux valve failure, high latitudes (weak H), magnetic anomalies |
| Resetting in FREE | CCW / CW switch, spring-loaded to centre | Align with the standby compass or another heading source |
| Fast slaving | High precession rate (≈60°/min) until synchronised | At switch-on or after a large error |
| Bank / accel cut-out | Slaving cut above ≈10° bank or ≈0.18 g | Stops the swinging detector being slaved in |
In FREE mode all the DGI wander rules return: earth rate, transport wander and real drift.
Is it working?
Gyro wander
Outputs
Other facilities
Larger systems
Larger systems
Errors
Exam traps
Summary