Aircraft Instruments · Chapter 13
The turn and slip indicator: the spring-restrained rate gyro and primary and secondary precession, calibration and construction, rotor speed and looping-plane errors, standard rates and bank angles, the slip ball, slip and skid, reading needle and ball, and the radius of a rate-one turn.
Exclusive study material prepared by eatpl.in
Arrow keys, the buttons or swipe to move between pages. The Lab is below the e-book.
Instruments · Chapter 13
A spring-restrained rate gyro measures how fast the aircraft is turning; a ball in a curved tube shows whether the turn is balanced.
One face, two instruments
The gyro inside
What it senses
How it measures rate
Reading the scale
Construction
Rotor speed
Error
Standard rates
| Rate | Turn rate | 360° takes | Bank at 120 kt TAS |
|---|---|---|---|
| Rate 1 | 3°/s | 2 min | ≈ 18° |
| Rate 2 | 6°/s | 1 min | ≈ 33° |
| Rate 3 | 9°/s | 40 s | ≈ 45° |
| Rate 4 | 12°/s | 30 s | ≈ 53° |
Bank and rate
Worked numbers
| TAS (kt) | Rule TAS/10 + 7 | Exact (tan φ = V ω / g) | Comment |
|---|---|---|---|
| 100 | 17° | 15° | rule slightly high |
| 150 | 22° | 22° | very good |
| 200 | 27° | 29° | good |
| 250 | 32° | 35° | edge of the useful range |
| 300 | 37° | 40° | rule under-estimates |
| 450 | 52° | 51° | too steep: airliners use ≤ 25–30° |
The slip indicator
The slip indicator
Unbalanced turns
Reading needle and ball
| Needle | Ball | Meaning |
|---|---|---|
| Centre | Centre | Straight and balanced |
| Right, at mark | Centre | Balanced rate-1 turn right |
| Right | Right (inside) | Slipping turn right: too much bank |
| Right | Left (outside) | Skidding turn right: too little bank / too much rudder |
| Centre | Right | Heading held with right wing low and left rudder: slipping |
| Taxi turn right | Left | Normal on the ground: needle with turn, ball outwards |
Practice
Geometry of a turn
Worked numbers
| TAS (kt) | Distance in 2 min | Diameter (÷ π) | Radius |
|---|---|---|---|
| 120 | 4 nm | 1.3 nm | 0.6 nm |
| 180 | 6 nm | 1.9 nm | 1.0 nm |
| 240 | 8 nm | 2.5 nm | 1.3 nm |
| 360 | 12 nm | 3.8 nm | 1.9 nm |
| 480 | 16 nm | 5.1 nm | 2.5 nm |
Errors and checks
Exam traps
Summary