Meteorology · Chapter 4
Air Density
Why thin air hurts performance, how pressure, temperature and humidity set density, and how to work out density altitude.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why pilots care
Thin air means poorer performance
- Density = mass of air in a unit volume, in g/m³ or kg/m³ (ISA sea level 1225 g/m³)
- Lift, thrust, drag and engine power all depend on density
- In low density: longer take-off run, higher true speeds for take-off and landing, less thrust, slower climb
- So a longer runway is needed, or a lower take-off weight
- Hot days, high airfields and low pressure all lower the density
Chapter 4 · Air Density
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
The gas equation
ρ = P / RT
- For a unit mass of gas, P = ρRT, so density ρ = P / RT (T in kelvin)
- Put in ISA sea level, 1013.25 hPa and 288 K, and you get 1225 g/m³
- Density is directly proportional to pressure: more pressure, more density
- Density is inversely proportional to absolute temperature: warmer air is lighter
- So warm air rises and cold air sinks; a cold day gives the best performance
Chapter 4 · Air Density
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Humidity
Moist air is lighter than dry air
- A water vapour molecule (H₂O, about 18) is lighter than the average air molecule (about 29)
- Total pressure = dry air pressure (p − e) + vapour pressure (e)
- Moist air density = (p − 3e/8) / RT, which is less than dry air at the same p and T
- Humidity is the smallest of the three factors; often ignored in calculations
- But in hot, humid weather add about 10% to the take-off distance and expect a weaker climb
Chapter 4 · Air Density
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Density altitude
The height in ISA that has today’s density
- Density altitude: the height in the ISA at which the observed density would be found
- In the ISA, density altitude = pressure altitude
- Each 1 °C above ISA raises density altitude about 120 ft above pressure altitude
- Warmer than ISA: density altitude higher than pressure altitude; colder: lower
- A high density altitude means the aircraft performs as if at a higher airfield
- At constant temperature, higher pressure lowers density altitude
Chapter 4 · Air Density
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Worked examples
Working out density altitude
DA = pressure altitude + 120 ft × (OAT − ISA temperature). ISA temperature ≈ 15 − 2 × (thousands of ft).
| Case | Pressure altitude | ISA temp there | OAT | Deviation | Density altitude |
|---|
| Hot plains airfield | 2000 ft | +11 °C | +31 °C | ISA +20 | 2000 + 2400 = 4400 ft |
| Sea level, summer | 0 ft | +15 °C | +40 °C | ISA +25 | 0 + 3000 = 3000 ft |
| High airfield | 6000 ft | +3 °C | +23 °C | ISA +20 | 6000 + 2400 = 8400 ft |
| Cold winter day | 1000 ft | +13 °C | +3 °C | ISA −10 | 1000 − 1200 = −200 ft |
| Exactly ISA | 4000 ft | +7 °C | +7 °C | ISA 0 | 4000 ft (DA = PA) |
Get the pressure altitude first: elevation + 30 ft for each hPa that QNH is below 1013 (minus if above).
Chapter 4 · Air Density
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Rules of thumb
What changes density by about 1%
The 1% rule
Each of these on its own lowers density by about 1%: a 10 hPa pressure fall, a 3 °C rise, or a 300 ft climb.
The 3% rule
In the lower atmosphere density falls about 3% per 1000 ft of height; a good guide up to about 20 000 ft.
Halving
Density roughly halves every 5–6 km: about ½ at 6 km, ¼ at 11 km, ⅛ at 17 km of the surface value.
Chapter 4 · Air Density
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Variation with height
Density falls with height at every level
Pressure and temperature both fall with height, but pressure falls faster, so density falls at every level.
Chapter 4 · Air Density
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Day, season and latitude
When and where the air is densest
- Daily: lowest density in the afternoon (hottest), highest just after sunrise (coldest)
- Seasonal: denser in winter, thinner in summer, following temperature and pressure
- At sea level density is least at the equator and greatest at the poles
- This holds up to about 8 km; above it the pattern reverses: denser over the equator
- Low-flying piston aircraft do better in high latitudes; high-flying jets do better in the tropics
Chapter 4 · Air Density
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Summary
What to take into the exam
Definition
Mass per unit volume, g/m³ or kg/m³. ISA MSL 1225 g/m³.
Gas equation
ρ = P/RT: up with pressure, down with temperature (kelvin).
Humidity
Moist air is lighter: (p − 3e/8)/RT. Small effect; add 10% take-off distance.
Density altitude
ISA height with today’s density. 120 ft per °C. Warmer than ISA → DA above PA.
1% rule
10 hPa fall = 3 °C rise = 300 ft climb ≈ 1% less density.
With height
About 3% per 1000 ft; ½ at 6 km, ¼ at 11 km, ⅛ at 17 km.
Day and season
Lowest in the afternoon, highest just after sunrise; lower in summer.
Latitude
Denser at the poles up to 8 km, denser over the equator above 8 km.
Chapter 4 · Air Density
10
e-books by eatpl.in · © 2026 · Do not copy or distribute