Meteorology · Chapter 12
Ice Accretion How ice builds up on an aircraft: hoar frost, rime and clear ice, the temperatures and clouds that favour each, what icing does, and engine and carburettor icing.
clear-ice horns supercooled droplets © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter twelve is about ice accretion, the build-up of ice on an aircraft in flight. Icing changes the shape of the wing, adds weight and drag, can jam controls and block the pitot tube, and it has caused many accidents. De-icing systems help, but only partly, so a pilot must know what kinds of ice form, in which temperatures and clouds, what they do to the aircraft, and how engines and carburettors ice up too.
Ice accretion
Why icing matters Ice accretion (icing) is ice forming on an aircraft; it is a serious hazard that can lead to loss of controlIt needs supercooled water (liquid below 0 °C) or moist air meeting a surface below 0 °C Two families: airframe icing (wings, tail, struts, aerials, windscreen) and engine icing (intakes, carburettor) Airframe types: hoar frost , rime , clear (glaze) ice and mixed ice Severity depends mostly on the size and number of supercooled drops , the temperature and the time spent in cloud De-icing and anti-icing give only partial protection: avoidance comes first Windscreen no forward view Pitot tube false airspeed Wing leading edges lift falls, drag rises Engine intakes impact ice, power loss Aerials poor radio Control hinges jammed surfaces Tailplane pitch control ice builds on leading edges
Chapter 12 · Ice Accretion
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Ice accretion, or icing, means ice forming on an aircraft. It is one of the most serious weather hazards because it can change the shape of the wing so much that the aircraft can no longer fly normally, and in the worst cases control is lost. Icing needs liquid water below zero degrees, which we call supercooled water, or moist air touching a surface that is colder than zero. There are two families. Airframe icing affects the wings, tail, struts, aerials and windscreen. Engine icing affects air intakes and carburettors. Airframe ice comes in four forms: hoar frost, rime, clear or glaze ice, and a mixture. How bad the icing is depends mostly on the size and number of supercooled drops, the temperature, and how long you stay in the cloud. De-icing systems only give partial protection, so understanding and avoiding icing comes first.
Airframe icing 1
Hoar frost A white, feathery deposit of ice crystals formed in clear air Forms when the airframe is below the frost point and water vapour sublimates straight to ice on it On the ground: an aircraft parked in the open on a clear, cold night In flight: a cold-soaked aircraft descending quickly from high altitude into warm, moist air Usually not a serious hazard in flight: it melts as the airframe warms or is shaken off But frost on the wings before take-off must be removed : even a thin layer spoils lift Parked on a clear, calm, cold night skin cools below the frost point · vapour sublimates remove all frost before take-off FL350 · −50 °C low level · +15 °C, moist Rapid descent of a cold-soaked aircraft frost forms on the cold skin
Chapter 12 · Ice Accretion
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Hoar frost is a white, feathery deposit of ice crystals, and it forms in clear air, not in cloud. It happens when the surface of the aircraft is colder than the frost point of the air around it, so water vapour turns straight into ice on the skin; that is sublimation. On the ground you see it on aircraft parked outside on a clear, cold night, as the airframe loses heat by radiation. In flight it can form when an aircraft that has been cold-soaked at high altitude descends quickly into warm, moist air. Hoar frost is usually not a serious hazard in the air, because it disappears as the airframe warms up, and vibration shakes it off. On the ground it is a different story: frost on the wings before take-off must always be removed, because even a thin, rough layer can badly spoil the lift.
Airframe icing 2
Rime ice and clear ice: it is all about drop size Rime white, brittle, porous Rime ice small droplets · freeze on impact Tiny droplets freeze the instant they hit Air is trapped: white, rough, opaque, light Builds forward into the airflow Layer cloud (ST, SC, AC, NS) · −10 to −40 °C Glassy layer with horns clear, dense, smooth Clear ice (glaze) large drops · spread back, then freeze Big drops do not freeze at once They run back, then freeze: glassy, heavy Hard to remove; can form horns CU, TCU, CB, NS, FZRA · 0 to −20 °C
Chapter 12 · Ice Accretion
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Rime and clear ice both form when an aircraft flies through supercooled water drops, and the difference comes down to drop size. Small supercooled droplets freeze the instant they touch the airframe. Lots of air is trapped between the frozen particles, so rime is white, opaque, porous and light, like the frost on the walls of a freezer. It builds forward into the airflow on leading edges and struts, and it is fairly easy to remove, though it still spoils the shape of the wing. Large supercooled drops behave differently. Only part of each drop freezes on impact; the rest spreads back over the surface and freezes there. Very little air is trapped, so the ice is clear and glassy, like an ice cube. Clear ice, also called glaze, is heavy, sticks hard, can form horns, causes unequal loading and vibration, and breaks away in dangerous lumps. It is the most hazardous type.
The four types side by side
Hoar frost, rime, clear and mixed ice Type How it forms Typical conditions Hazard Hoar frost Sublimation of vapour onto a surface below the frost point Clear air: parked on cold nights; rapid descent into moist air Low in flight; remove before take-off Rime (opaque) Small supercooled droplets freeze instantly, trapping airLayer clouds (ST, SC, AC, NS) at about −10 to −40 °C; in CB colder than about −20 °C Moderate: spoils wing shape, light Clear ice (glaze) Large supercooled drops spread, then freezeCU, TCU, CB, NS and AS from 0 to about −20 °C; freezing rain below a warm front Severe : heavy, hard, hornsMixed (rime and clear) A wide range of drop sizes together Cumuliform cloud and frontal cloud, 0 to −40 °C Rough and heavy, hard to remove Freezing fog deposit Supercooled fog droplets freeze on a parked aircraft Freezing fog on the ground A rime coating to remove before flight
Clear ice is especially likely after a rapid descent from very cold air into precipitation, and in rain falling into sub-zero air ahead of a warm front.
Chapter 12 · Ice Accretion
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put the four types side by side. Hoar frost forms by sublimation in clear air when the surface is below the frost point; it is a low hazard in flight but must be cleaned off before take-off. Rime forms from small supercooled droplets, typically in layer clouds such as stratus, stratocumulus, altocumulus and nimbostratus at temperatures of about minus ten to minus forty, and in cumulonimbus where it is colder than about minus twenty. Clear ice comes from large drops, mainly in cumulus, cumulonimbus, nimbostratus and altostratus between zero and about minus twenty, and in freezing rain under a warm front. When drops of many sizes are present together, between zero and minus forty, you get mixed ice, rough and heavy. And when freezing fog lies over a parked aircraft, its droplets freeze on contact and leave a coating of rime.
Temperature and severity
Icing is worst just below freezing Severe Moderate Light Very light 0 °C −5 °C −10 °C −15 °C −20 °C −25 °C −30 °C −35 °C −40 °C −7 −12 Icing severity outside cumulonimbus warm end: most supercooled water and the biggest drops Inside TCU and CB: light to severe icing down to about −20 °C Below −40 °C: all ice, no icing Drops (blue) thin out as it gets colder; ice crystals (white) take over. Colder cloud holds a smaller share of supercooled water , so the chance of icing falls off below about −20 °C. The size of the drops matters as much as the temperature.
Chapter 12 · Ice Accretion
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Icing is worst just below freezing. Outside cumulonimbus, typical severity bands are: severe from zero to minus seven, moderate from minus seven to minus twelve, light from minus twelve to minus twenty, and very light from minus twenty to minus forty. Why? Near zero, clouds hold the largest amounts of supercooled liquid water, and drops can be large, which means clear ice. The largest liquid water content is usually found between zero and about minus fifteen. As the cloud gets colder, a growing share of its water is already ice crystals, which bounce off rather than stick, so the probability of icing falls away, especially below minus twenty. Below about minus forty, cloud is entirely ice and there is no icing. The exception is the cumulonimbus, whose powerful updraughts carry large supercooled drops high up, so it can give severe icing anywhere from zero to about minus twenty.
Icing by cloud type
Which clouds ice up the aircraft Cloud Contains Icing risk Cirrus, cirrostratus, cirrocumulus Almost entirely ice crystals Negligible Altostratus, nimbostratus Supercooled drops and ice crystals in varying amounts Light to moderate ; can be prolonged in NSAltocumulus Mostly supercooled droplets Light to moderate ; severe over mountains Stratus, stratocumulus Small supercooled droplets Light to moderate, mostly rime Towering cumulus (TCU) Large supercooled drops in strong updraughts Light to severe , at least up to the −20 °C levelCumulonimbus (CB) Large drops, hail, ice Light to severe up to the −20 °C level ; severe icing not significant colder than thatFreezing rain (below a warm front) Supercooled raindrops below cloud Severe clear ice , very fast build-up
Chapter 12 · Ice Accretion
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
The type of cloud tells you a lot about the icing risk. Cirrus, cirrostratus and cirrocumulus are made almost entirely of ice crystals, so the icing hazard is negligible. Altostratus and nimbostratus contain supercooled drops and ice crystals in varying amounts and can give light to moderate icing, which may go on for a long time in deep nimbostratus. Altocumulus is mostly supercooled droplets and gives light to moderate icing, but over mountains, where the air is forced up strongly, it can be severe. Stratus and stratocumulus give light to moderate icing, mostly rime. Towering cumulus can give anything from light to severe icing, at least up to the minus twenty level. Cumulonimbus also ranges from light to severe up to the minus twenty level; colder than that, severe icing is not significant. And freezing rain below a warm front can coat an aircraft in clear ice extremely quickly.
What ice does
Effects of airframe icing Lift and weight Ice spoils the wing’s shape: less lift , more weight , more drag.
Stall The stalling speed rises appreciably, and the stall may come with little warning.
Drag and power Drag increases ; uneven ice on propeller blades cuts efficiency and causes vibration.
Controls Hinges of ailerons, elevators and trim tabs can jam or move stiffly.
Instruments An iced pitot tube gives false airspeed readings; static vents can block too.
Radio Ice on aerials makes communication and navigation reception poor.
Vision An iced windscreen can leave the pilot with no forward view for landing.
What to do Use de-icing and anti-icing early; leave icing cloud by a change of level, ideally into air above 0 °C.
Chapter 12 · Ice Accretion
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
What does ice actually do to an aircraft? First, it spoils the shape of the wing, so the wing makes less lift while the aircraft gets heavier and draggier. That means the stalling speed goes up, sometimes a lot, and the stall may come with little warning. Drag increases, and uneven ice on propeller blades reduces their efficiency and sets up vibration, so you lose effective power. Ice in the hinges of the ailerons, elevators and trim tabs can make them stiff or jam them. An iced pitot tube gives false airspeed readings, and blocked static vents affect other instruments too. Ice on aerials makes radio communication difficult, and an iced windscreen can leave the pilot unable to see the runway. The answer is to use the de-icing and anti-icing systems early and, if icing continues, to change level, ideally into air warmer than zero.
Engine icing
Impact icing and carburettor icing Impact icing : supercooled drops strike and freeze on air intakes , restricting airflow and cutting power; turbine flame-out is possibleCarburettor icing : air speeds up through the venturi , pressure falls and it cools adiabatically ; fuel evaporation cools it furtherThe drop can be 20–30 °C, so ice forms around the throttle butterfly even in clear air Possible from about +30 °C down to −10 °C ambient; negligible below −10 °C unless liquid water is present Needs moisture: unlikely when relative humidity is below about 60% ; worst in moist air at part throttle Cure: carburettor heat , applied early Inside a carburettor float chamber Venturi pressure falls · air cools Throttle valve ice builds here intake +20 °C down to −10 °C to engine → Risk · +30 to −10 °C outside air · RH above about 60% · part throttle, descent · drop of 20–30 °C · cure: carb heat early Fuel evaporation adds to the cooling.
Chapter 12 · Ice Accretion
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Engines ice up in two main ways. Impact icing happens when supercooled drops strike the air intake and freeze there, restricting the airflow and reducing power; in a turbine engine it can even cause a flame-out. Carburettor icing is sneakier. As air rushes through the narrow venturi of the carburettor, its pressure falls and it cools adiabatically. Fuel is sprayed in and evaporates, which takes even more heat from the air. The temperature can drop by twenty or thirty degrees, so moisture in the air freezes around the venturi and the throttle butterfly, even in clear air on a warm day. It can happen with outside air temperatures from about plus thirty down to minus ten. Colder than minus ten it is negligible unless there is liquid water about, and it is unlikely when the relative humidity is below about sixty per cent. The remedy is carburettor heat, used early.
India
Freezing level over India through the year Approximate pressure level of the 0 °C isotherm (lower pressure = higher altitude):
Season North India Central India South India Winter (Jan–Feb) 700 hPa (≈10 000 ft)600 hPa 600 hPa Pre-monsoon 650 hPa 600 hPa 550 hPa SW monsoon 550 hPa 500 hPa (≈18 500 ft)500 hPa Post-monsoon 550 hPa 600 hPa 650 hPa
Roughly: 700 hPa ≈ 10 000 ft, 600 hPa ≈ 14 000 ft, 550 hPa ≈ 16 000 ft, 500 hPa ≈ 18 500 ft. The freezing level is lowest in the north in winter and highest in the monsoon .
Chapter 12 · Ice Accretion
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because icing starts at the freezing level, it helps to know roughly where that level is over India. In winter, during the north-east monsoon season, the freezing level over north India is lowest, near seven hundred hectopascals, about ten thousand feet, while over central and south India it is near six hundred hectopascals, about fourteen thousand feet. In the pre-monsoon season it is near six hundred and fifty in the north and five hundred and fifty in the south. During the south-west monsoon it is highest, around five hundred hectopascals, about eighteen and a half thousand feet, over central and southern India, and five hundred and fifty in the north. After the monsoon it sinks again. So in a north Indian winter you can meet icing from about ten thousand feet, while in the monsoon you may not meet it until well above eighteen thousand feet.
Summary
What to take into the exam Hoar frost Clear air, surface below frost point, sublimation. Parked on cold nights or rapid descent. Low hazard in flight.
Rime Small droplets freeze instantly; air trapped; white, porous, light. Layer cloud, about −10 to −40 °C.
Clear ice Large drops spread then freeze; glassy, heavy, tough. 0 to −20 °C; freezing rain. Most dangerous.
Mixed Wide range of drop sizes, 0 to −40 °C. Freezing fog on a parked aircraft leaves rime.
Bands Severe 0 to −7, moderate −7 to −12, light −12 to −20, very light −20 to −40 °C.
Clouds CI/CS/CC negligible; AS/NS light–moderate; AC severe over hills; TCU and CB light–severe to −20 °C.
Effects Lift down, weight and drag up, stall speed up; controls jam; pitot gives false ASI; aerials ice.
Carburettor Venturi cooling plus fuel evaporation; +30 to −10 °C; unlikely below 60% RH. Use carb heat.
Chapter 12 · Ice Accretion
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up icing. Hoar frost forms in clear air on a surface below the frost point, by sublimation; it is low risk in flight but must be removed before take-off. Rime comes from small droplets that freeze instantly, trapping air, so it is white, porous and light. Clear ice comes from large drops that spread before freezing; it is glassy, heavy and the most dangerous, especially from zero to minus twenty and in freezing rain. Mixed ice comes from a wide range of drop sizes. Severity is greatest from zero to minus seven and falls away below minus twenty. High clouds give negligible icing, altostratus and nimbostratus light to moderate, altocumulus severe over mountains, and cumulus and cumulonimbus light to severe up to minus twenty. Icing raises the stalling speed, adds drag and weight and upsets instruments. Carburettor icing can occur from plus thirty to minus ten in moist air, so use carburettor heat.