Meteorology · Chapter 9
Stability and Instability Adiabatic cooling, the dry, saturated and environmental lapse rates, and how comparing them tells you whether the air will churn or stay still.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter nine is about stability, the single idea that decides whether a sky stays flat and hazy or boils up into towering cloud. We start with what happens to a parcel of air when it rises or sinks, meet the three lapse rates, dry, saturated and environmental, and learn the simple rules that compare them. Then we look at the special kinds of instability, and at the tephigram that forecasters use to read it all from a radiosonde ascent.
The parcel idea
Adiabatic: no heat in, no heat out Air is a poor conductor , so a small rising or sinking parcel can be treated as insulated from its surroundings Isothermal process : heat flows in or out so the temperature stays the same Adiabatic process : no heat enters or leaves (Greek: “not passing through”)A rising parcel meets lower pressure, expands , does work and cools A sinking parcel is compressed and warms Adiabatic processes largely set the vertical temperature structure of the atmosphere 1000 hPa 850 hPa 700 hPa +30 °C +15 °C 0 °C Rising: expands and cools ≈10 °C/km Sinking: compressed and warms No heat in or out: the change comes from expansion or compression
Chapter 9 · Stability and Instability
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air conducts heat very poorly, so a small bubble or parcel of air that rises or sinks hardly exchanges any heat with the air around it. In an isothermal process heat is allowed in or out so that the temperature stays the same. In an adiabatic process, from the Greek for not passing through, no heat enters or leaves at all. Picture a parcel rising. It moves into lower pressure and expands, and the work it does in pushing the surrounding air aside comes out of its own internal energy, so its temperature falls. Bring it down again and it is compressed, work is done on it, and it warms up. These adiabatic changes largely decide how temperature is spread through the depth of the atmosphere, and they are the key to everything in this chapter.
Three lapse rates
DALR, SALR and ELR -60 -50 -40 -30 -20 -10 0 10 20 30 0 1 2 3 4 5 6 7 8 9 10 Temperature (°C) Height (km) DALR 9.8 °C/km dry parcel, fixed SALR ≈4–7 °C/km saturated parcel, curves ELR (ISA 6.5 °C/km) the real air around it surface +30 °C Dry parcel cools at the DALR Saturated parcel latent heat slows cooling Environment measured by radiosonde DALR and SALR describe a parcel being lifted; the ELR describes the air around it . Stability comes from comparing them.
Chapter 9 · Stability and Instability
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three lapse rates do all the work in this chapter. The dry adiabatic lapse rate, DALR, is the rate at which an unsaturated parcel cools when lifted adiabatically. It is fixed at nine point eight degrees per kilometre, about three degrees per thousand feet; just think of it as ten per kilometre. The saturated adiabatic lapse rate, SALR, applies to a parcel that is already saturated. It cools more slowly, about five degrees per kilometre near the ground, but it is not fixed. And the environmental lapse rate, ELR, is not a parcel at all. It is the real temperature structure of the surrounding atmosphere, the one a radiosonde measures. In ISA it is six point five degrees per kilometre, between the other two and usually nearer the saturated rate, but in real air it can take any value. Stability is simply a comparison of the parcel’s rate with the environment’s.
Why saturated air cools more slowly
Latent heat props up the SALR As saturated air rises and cools, its extra vapour condenses Condensation releases latent heat , which offsets part of the adiabatic cooling So the SALR (≈5 °C/km low down) is less than the DALR (9.8 °C/km) Warm air holds more vapour, so the SALR is smallest in warm, moist air (about 4 °C/km in the tropics near the surface) High up, where it is very cold, there is little vapour left to condense So the SALR approaches the DALR at temperatures below about −40 °C Cooling for each kilometre of lift Dry parcel (DALR) 9.8 °C Saturated at +25 °C 4.0 °C Saturated at +0 °C 5.7 °C Saturated at -40 °C 8.5 °C cooling cancelled by latent heat of condensation
Chapter 9 · Stability and Instability
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why does saturated air cool more slowly? As a saturated parcel rises and cools, it can no longer hold all its water vapour, so the extra vapour condenses into cloud. Condensation releases latent heat, and that heat makes up for part of the adiabatic cooling. The result is a saturated lapse rate of about five degrees per kilometre near the ground, roughly half the dry rate. But the SALR is not a constant. Warm air carries a lot of vapour, so in warm, moist tropical air near the surface a great deal of latent heat is released and the SALR may be only about four degrees per kilometre. High in the troposphere, where it is very cold, there is hardly any vapour left to condense, so little latent heat is released and the SALR creeps up towards the dry rate. Below about minus forty degrees the two are almost the same.
The environment
The real lapse rate can be anything Normal : falling with height, typically between SALR and DALR (ISA 6.5 °C/km)Super-adiabatic : falling faster than the DALR, e.g. over hot ground on a sunny afternoonIsothermal : zero lapse rate, temperature constant with heightInversion : a negative lapse rate, temperature rising with heightA lapse rate is counted positive when temperature falls with height 0 10 20 30 40 0 1 2 Temperature (°C) Height (km) Super-adiabatic 0 10 20 30 40 0 1 2 Temperature (°C) Height (km) Normal 0 10 20 30 40 0 1 2 Temperature (°C) Height (km) Isothermal 0 10 20 30 40 0 1 2 Temperature (°C) Height (km) Inversion DALR for comparison
Chapter 9 · Stability and Instability
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
The environmental lapse rate is whatever the real atmosphere happens to be doing. Usually temperature falls with height at a rate somewhere between the saturated and dry rates, like the six and a half degrees of ISA. On a hot, sunny afternoon the air right next to baking ground can cool with height even faster than the dry adiabatic rate; this is a super-adiabatic lapse rate, and it is very unstable. Sometimes temperature does not change with height at all: an isothermal layer, a lapse rate of zero. And sometimes temperature rises with height: an inversion. Remember the sign convention. A lapse rate is counted as positive when temperature falls with height, so an inversion is a negative lapse rate, and an isothermal layer has a lapse rate of zero.
Inversions
A lid that traps the air Inversion : temperature increases with height, a negative lapse rateLow-level inversions form on clear, calm nights by radiation cooling , most often in winter Higher inversions come with subsidence in highs and ridges, and sometimes with fronts An inversion is very stable : no vertical mixing and little turbulence Smoke, haze, dust, mist and fog are trapped beneath , so visibility is poor One often sits at the top of a stratus layer or of radiation fog Inversion layer: the lid temperature rises with height Smoke, haze and fog trapped poor visibility beneath T profile warmer
Chapter 9 · Stability and Instability
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
An inversion is a layer in which temperature increases with height. Near the ground they form on clear, calm nights, when the surface loses heat by radiation and chills the air in contact with it; they are therefore common in winter. Higher up, inversions come with subsiding air in anticyclones and ridges, and sometimes with fronts. An inversion is extremely stable. Air below it cannot rise through it, so there is no vertical mixing and very little turbulence. The catch is visibility: smoke, haze, dust, mist and fog get trapped beneath the lid and spread out sideways, so visibility under an inversion is often poor. You will frequently find an inversion right at the top of a layer of stratus or of radiation fog. Flying out of the top of a smoggy layer into clear smooth air is a classic sign that you have just climbed through one.
What stability means
Push it, and see what happens Stable pushed up, it sinks back colder than surroundings: sinks Neutral it stays where it is put same temperature as surroundings: stays Unstable it keeps going warmer than surroundings: rises The stratosphere and thermosphere are stable layers; the troposphere and mesosphere, where temperature falls with height, tend to be unstable.
Chapter 9 · Stability and Instability
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Stability is about what happens after a small push. Think of a ball. In a bowl, push it and it rolls back to the bottom: that is stable. On a flat table it simply stays where you pushed it: neutral. Balanced on top of a dome, a tiny push sends it rolling away: unstable. Air behaves the same way. Give a parcel a small push upward. If at its new level it is colder and denser than the air around it, it sinks back: the layer is stable. If it is exactly the same temperature, it stays put: neutral. If it is warmer and lighter than its surroundings, it carries on rising by itself: unstable. Forecasters measure this on a thermodynamic diagram by asking whether the parcel gains or loses energy. Layers where temperature rises or stays steady with height, like the stratosphere, are stable; layers where it falls, like the troposphere, tend to be unstable.
The stability rules
Compare the environment with the parcel Learn these five lines; nearly every stability question is one of them.
Condition Result ELR < DALR Dry (unsaturated) air is stable ELR < SALR Saturated air is stable, and so is dry air: absolutely stable ELR > DALR Both dry and saturated air unstable: absolutely unstable DALR > ELR > SALR Conditionally unstable : stable if dry, unstable once saturatedELR = DALR (or = SALR for saturated air)Neutral (indifferent)Isothermal layer or inversion Very stable (ELR zero or negative)
Quick test: is the environment cooling with height faster than the parcel would? Then the parcel ends up warmer than its surroundings and keeps rising.
Chapter 9 · Stability and Instability
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the rules. Compare the environmental lapse rate with the parcel’s lapse rate. If the environment cools with height more slowly than the dry rate, a dry parcel lifted through it ends up colder than its surroundings, so dry air is stable. If the environment cools more slowly even than the saturated rate, both dry and saturated parcels sink back: that is absolute stability. If the environment cools faster than the dry rate, every parcel, dry or saturated, ends up warmer and keeps going: absolute instability. The interesting case is in between: environmental rate less than dry but greater than saturated. Dry air is then stable, but once the air is saturated it becomes unstable. That is conditional instability, and it is the usual state of the tropical atmosphere. If the rates are equal the air is neutral. And an isothermal layer or an inversion is always very stable.
Seeing it on a graph
Where the parcel ends up at the same height -20 -10 0 10 20 30 0 1 2 3 Temperature (°C) Height (km) Absolutely stable ELR < SALR -20 -10 0 10 20 30 0 1 2 3 Temperature (°C) Height (km) Conditionally unstable SALR < ELR < DALR -20 -10 0 10 20 30 0 1 2 3 Temperature (°C) Height (km) Absolutely unstable ELR > DALR -20 -10 0 10 20 30 0 1 2 3 Temperature (°C) Height (km) Neutral (dry) ELR = DALR DALR (dry parcel) SALR (saturated parcel) ELR (environment) Start every line at the same surface temperature. At any height, if the parcel line (DALR or SALR) is to the right of the ELR, the parcel is warmer: unstable .
Chapter 9 · Stability and Instability
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
On a graph of temperature against height, start all three lines from the same surface temperature and simply look across at any level. The parcel follows the dry adiabat while it is unsaturated and the saturated adiabat once it is in cloud. If, at that level, the parcel line lies to the right of the environment line, the parcel is warmer than its surroundings and will keep rising: unstable. If it lies to the left, the parcel is colder and sinks back: stable. In the first panel the environment line leans less than both adiabats, so both lie to its left: absolutely stable. In the second, the environment lies between them: the dry parcel is colder, the saturated one warmer, so it is conditionally unstable. In the third, the environment leans more than even the dry adiabat: absolutely unstable. And in the last the environment lies exactly on the dry adiabat: neutral.
Worked examples
Numbers you will be asked for Dry parcel lifted 2 km Surface 30 °C , DALR ≈10 °C/km. 30 − (2 × 9.8) = ≈10 °C at 2 km.
Dry parcel lifted 1 km Surface 35 °C . 35 − 9.8 = ≈25 °C at 1 km.
Descending air Unsaturated air sinking 3000 ft warms by 3 × 3 = 9 °C .
ELR 6.8, DALR 9.8 ELR is less than the DALR, so dry air is stable .
ELR 4.5, SALR 5.5 ELR is less than the SALR, so even saturated air is stable .
ELR 7, SALR 5, DALR 9.8 ELR between the two: conditionally unstable .
Chapter 9 · Stability and Instability
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us work some numbers. A dry parcel starts at thirty degrees and is lifted two kilometres. It cools at nearly ten degrees per kilometre, so it loses about twenty degrees and arrives at about ten. Another starts at thirty-five and is lifted one kilometre: thirty-five minus about ten gives about twenty-five. The same rule works in reverse for sinking air: unsaturated air coming down three thousand feet warms by three degrees per thousand feet, so nine degrees. Now stability. If the environmental rate is six point eight and the dry rate is nine point eight, the environment cools more slowly than a dry parcel would, so dry air is stable. If the environment is four point five and the saturated rate five point five, even a saturated parcel ends up colder, so the air is stable. And an environment of seven, between a saturated five and a dry nine point eight, is conditionally unstable.
Hidden instability
Conditional, latent and potential instability Conditional instability DALR > ELR > SALR . Stable while the air is dry, unstable once it is saturated . The condition is saturation.
Latent instability A parcel is stable at first, but if forced up far enough it becomes warmer than its surroundings and rises freely. Real latent : energy released exceeds the work of lifting. Pseudo-latent : lifting costs more than is gained.
Potential (convective) A whole layer lifted bodily becomes unstable. Needs moist air low down and dry air above : the moist base saturates first and warms by latent heat, steepening the layer’s lapse rate.
Chapter 9 · Stability and Instability
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Instability can also be hidden. Conditional instability, as we saw, means the environmental rate lies between the dry and saturated rates: the air is stable while dry and becomes unstable once it is saturated, so saturation is the condition. Latent instability means a parcel is stable to begin with, but if something forces it high enough, over a mountain or up a front, it eventually becomes warmer than its surroundings and then rises freely. If the energy released after that is much more than the work needed to lift it, the instability is real latent; if lifting costs more than is gained, it is pseudo-latent. Potential, or convective, instability concerns a whole layer lifted bodily. It needs moist air at the bottom of the layer and dry air at the top. The moist base saturates first and is warmed by latent heat, while the dry top keeps cooling at the dry rate, so the layer’s lapse rate steepens until it is unstable. This is how widespread thunderstorms erupt ahead of fronts.
The forecaster’s tool
The tephigram A thermodynamic diagram on which radiosonde temperatures, dew points and rawin winds are plotted Shows stability , the LCL and cloud base and top, the tropopause , freezing level, mintra level , latent and potential instability Also gives wet-bulb temperature and altimeter corrections Lines: isotherms and dry adiabats (potential temperature) cross at right angles Isobars run gently curved across; saturated adiabats curve and become parallel to dry adiabats high upDashed saturation mixing ratio lines (g/kg) for finding dew point and LCL 1000 hPa 850 hPa 700 hPa 500 hPa Temperature Dew point isotherms dry adiabats saturated adiabats mixing ratio (g/kg)
Chapter 9 · Stability and Instability
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The tephigram is the forecaster’s chart of the vertical structure of the atmosphere. On it are plotted the temperatures and dew points measured by a radiosonde balloon and the winds found by rawin. From it a forecaster reads stability, the lifting condensation level and so the cloud base and cloud tops, the tropopause, the freezing level and the mintra level, latent and potential instability, the wet-bulb temperature and even altimeter corrections. Its grid looks complicated but has only five sets of lines. Isotherms and dry adiabats, which are lines of constant potential temperature, cross each other at right angles, so the whole grid looks tilted. Isobars run almost horizontally across the chart with a gentle curve. Saturated adiabats curve across and, high up, become parallel to the dry adiabats. And dashed lines of saturation mixing ratio, in grams per kilogram, are used with the dew point.
Finding the cloud base
Normand’s theorem and the LCL Dry bulb 30 °C up the dry adiabat Wet bulb ≈22 °C up the saturated adiabat Dew point 18 °C up the mixing ratio line Normand point = LCL ≈840 hPa, about 5100 ft up cloud base = LCL Spread 12 °C × 400 ft ≈ 4800 ft quick rule for cumulus base
Chapter 9 · Stability and Instability
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Normand’s theorem gives forecasters the cloud base. On the tephigram, draw a dry adiabat upward from the surface dry-bulb temperature, a saturated adiabat upward from the wet-bulb temperature, and a saturation mixing-ratio line upward from the dew point. All three meet at one point, the Normand point. So if you know any two of the three temperatures you can find the third at any level. The first Normand point found from the surface temperatures is the lifting condensation level: the height at which surface air, lifted, would condense, and so the base of cumulus cloud. There is a handy rule of thumb for the same thing. The cloud base is roughly one hundred and twenty-five metres, or four hundred feet, for every degree of difference between temperature and dew point. With a temperature of thirty and a dew point of twenty-two, the spread is eight degrees, so the cumulus base is about three thousand two hundred feet.
Summary
What to take into the exam Adiabatic No heat exchange. Rising air expands and cools; sinking air is compressed and warms.
DALR 9.8 °C/km (3 °C/1000 ft), fixed. For unsaturated parcels.
SALR ≈5 °C/km low down; varies; latent heat makes it smaller; nears DALR below −40 °C.
ELR The real atmosphere; ISA 6.5 °C/km; can be super-adiabatic, zero or negative.
Inversion Negative lapse rate; very stable; poor visibility beneath; common on winter nights and in highs.
Rules ELR < SALR: absolutely stable. ELR > DALR: absolutely unstable. Between: conditional.
Hidden instability Latent: unstable after forced lift (real or pseudo). Potential: moist below, dry above, layer lifted.
Tephigram Normand point (T, Tw, Td lines meet) = LCL. Base ≈ 400 ft per °C of spread.
Chapter 9 · Stability and Instability
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the chapter in eight cards. An adiabatic process exchanges no heat: rising air expands and cools, sinking air warms. The dry adiabatic lapse rate is fixed at nine point eight degrees per kilometre, three per thousand feet. The saturated rate is about five per kilometre low down; it is smaller because latent heat is released, and it approaches the dry rate below minus forty. The environmental rate is the real atmosphere and can be anything, including an inversion, which is a negative lapse rate, very stable, with poor visibility trapped beneath. The rules: environment less than saturated, absolutely stable; more than dry, absolutely unstable; in between, conditionally unstable. Latent instability appears after forced lifting, and potential instability when a moist-below, dry-above layer is lifted. And on the tephigram, the Normand point gives the lifting condensation level, roughly four hundred feet for each degree of dew point spread.