Meteorology · Chapter 7
Visibility and Fog What visibility and RVR mean, what reduces them, why slant visibility can fail on approach, and how each type of fog forms and clears.
Clear above stars and a sharp fog top Shallow fog below runway lost on approach © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Chapter seven is about visibility and fog. Seeing the runway is what take-off and landing depend on, and poor visibility is one of the most serious hazards in aviation, even at airfields with instrument landing systems. We will define visibility and runway visual range, see how they are measured, look at everything that can reduce them, from haze and dust to volcanic ash, and then study fog in detail: how radiation, advection and the other types form, where and when they occur in India, and how they clear.
What visibility means
Seeing and recognising objects By day: the greatest distance at which a black object of suitable size near the ground can be seen and recognised against a bright background By night: the greatest distance at which lights of about 1000 candela can be seen and identified against an unlit background The met office reports horizontal visibility at the airfield; it can differ by direction Observers use visibility landmarks : objects by day and lights by night at known distances Vertical and slant visibility seen from the air may be quite different ≈ 3 km By day dark object against a bright sky 1000 cd light By night lights of about 1000 candela, unlit background
Chapter 7 · Visibility and Fog
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
For a pilot, being able to see landmarks, other aircraft, approach lights and the runway is everything during take-off and landing. ICAO defines visibility in two ways and uses the greater. By day, it is the greatest distance at which a black object of suitable size, near the ground, can be seen and recognised against a bright background such as the sky. By night, it is the greatest distance at which lights of about one thousand candela can be seen and identified against an unlit background. The visibility reported by the met office is the horizontal visibility at the airfield, and it may be different in different directions. Observers judge it from visibility landmarks: buildings and markers by day, and lights by night, all at known distances. Remember that what you see from the air, looking down or along a slope, can be quite different.
Runway visual range
RVR: what the pilot sees along the runway RVR : the range over which the pilot of an aircraft on the runway centre line can see the runway markings, edge lights or centre line lightsMeasured by instruments close to the touchdown , mid-point and stop-end of the runway Reported when the visibility or the RVR is less than 1500 m Because it uses the bright runway lights, RVR is often greater than the reported visibility at night Displays are in the met office and the ATC tower RVR 600 m The pilot’s view on the centre line how far the runway lights and markings can be seen touchdown mid-point stop-end RVR sensors along the runway, readings in the met office and tower Where it is measured
Chapter 7 · Visibility and Fog
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Runway visual range, or R V R, is the range over which the pilot of an aircraft on the centre line of the runway can see the runway surface markings, or the lights that outline the runway or mark its centre line. It answers the pilot’s real question: how far down the runway can I see? Airports with RVR equipment measure it close to the touchdown zone, and often at the mid-point and the far end as well. RVR is reported whenever the visibility or the RVR is less than fifteen hundred metres. Because the pilot is looking at powerful runway lights, the RVR at night is often greater than the general visibility reported by the observer. The readings are displayed both in the met office and in the control tower.
Measuring it
Transmissometers and scatter meters A transmissometer (scopograph) sends a light beam to a photoelectric receiver a known distance away The more fog, haze or dust in the path, the weaker the received light , and the lower the RVR A forward-scatter meter measures light scattered by particles in a small volume; common at modern airports Some Indian airports have used the Automatic Visual Range Assessor (AVRA) A ceilometer measures cloud base, not visibility: a classic trap Projector Receiver photo-electric cell known baseline: less light arrives in fog Display in met office and tower RVR 550 m Transmissometer a beam across a known distance
Chapter 7 · Visibility and Fog
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
How is visibility measured along a runway? The classic instrument is the transmissometer, also called a scopograph. A light source on one mast sends a beam to a photoelectric receiver on another mast a known distance away. The receiver produces an electric current in proportion to the light that arrives, so the more fog, haze or dust there is in the path, the weaker the current and the lower the computed RVR. Many modern airports instead use forward-scatter meters, which measure how much light is scattered by particles in a small sample of air. Some Indian airports have used a system called the Automatic Visual Range Assessor. The readings are displayed in the met office and the tower. One trap: a ceilometer measures the height of the cloud base, not the visibility.
What reduces visibility
Lithometeors and hydrometeors Phenomenon What it is Typical visibility Haze Very small dry particles of smoke, dust or salt; milky look 5000 m or less Mist Tiny water droplets; RH close to 100% 1000 m to 5000 m Fog Water droplets or ice crystals; cloud on the ground; RH about 100% less than 1000 m Smog Fog mixed with smoke haze; a health hazard too very poor Dust storm Strong wind lifting dust or sand over a wide area often below 1000 m ; clears fast after rain Rain / drizzle Moderate rain 1–3 km; heavy rain or showers below 1000 m; drizzle 3 km or less depends on intensity and drop size Snow Falling snow scatters light strongly can fall below 1000 m
Mist and fog are both water droplets; the difference is visibility: 1000 m is the dividing line.
Chapter 7 · Visibility and Fog
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
This table sorts out the main obscurations. Haze is a suspension of very small dry particles of smoke, dust or salt that gives the air a milky look, with visibility of five thousand metres or less. Mist is a suspension of tiny water droplets, with the relative humidity close to one hundred per cent, and visibility from one thousand up to five thousand metres. Fog is the same kind of suspension, water droplets or ice crystals, but thick enough to bring the visibility below one thousand metres. That one thousand metre line is what separates mist from fog. Fog is really cloud sitting on the ground. Smog is fog mixed with smoke and is a health hazard as well. A dust storm can cut visibility well below a kilometre, though rain clears it quickly. And precipitation matters too: moderate rain gives one to three kilometres, heavy rain, showers or snow can give less than one thousand metres, and drizzle three kilometres or less.
Dust, smoke, salt and ash
Solid particles in the air Dust haze Dust raised by strong winds in dry areas. A summer hazard, worse by day than at night. Widespread, so nearby diversions suffer too; can stretch from Rajasthan to Bihar and up to 6–8 km.
Smoke haze Smoke from industry and homes, trapped under a strong ground inversion when winds are calm or very light; worst around big cities.
Sea spray Salt from wave crests feeds condensation near the coast, especially in monsoon gales and cyclones. Salt can coat a low-flying aircraft’s windscreen .
Volcanic ash Carried far by upper winds and slow to settle. Cuts visibility to almost nil and damages engines . India’s active volcano is Barren Island in the Andamans.
Chapter 7 · Visibility and Fog
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now the solid particles. Dust haze forms when strong winds lift dust in desert and semi-arid areas and it stays suspended. In India it is a summer hazard. It is thicker by day than at night, because the wind drops after dark and some dust settles. It covers huge areas, sometimes from Rajasthan across Punjab, Haryana and Uttar Pradesh to Bihar, and can reach six to eight kilometres in height, so diversion airfields nearby are often just as bad. Smoke haze builds up from industrial and domestic smoke when winds are calm and a strong ground inversion traps it. Sea spray throws salt into the lower air near coasts, which encourages condensation, and in rare cases leaves a film of salt on the windscreen of a low-flying aircraft. Volcanic ash is the most dangerous: it spreads over great distances, cuts visibility almost to nothing and can stop engines. India’s active volcano is on Barren Island in the Andaman Sea.
Looking down versus looking ahead
Vertical visibility good, slant visibility poor Slant view on approach a long path through fog: runway lost Vertical view overhead a short path: runway visible Shallow fog layer, a few hundred feet deep path inside the fog Higher up the air is usually much clearer, except in cloud and precipitation. Looking towards the sun visibility is worse.
Chapter 7 · Visibility and Fog
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Haze and fog layers are usually confined to the lowest few thousand feet, and fog is often only a few hundred feet deep. Imagine flying over an airfield covered by a shallow fog layer. Looking straight down, your line of sight passes through only a thin slice of fog, so you can see the runway clearly. But when you turn onto the approach, you look along a slant, and your line of sight now runs through a long path of fog. The runway can disappear just when you need it. So vertical visibility may be good while slant visibility is poor. In general, the higher you go the clearer the air, except in cloud and precipitation. And visibility is worse looking towards the sun, because the haze is lit up in front of you.
Radiation fog
The balance between cooling and stirring Calm only the air touching the ground cools Dew or frost no fog forms Light wind 2–8 kt gentle mixing through a shallow layer Radiation fog a few hundred feet deep Strong wind mixing through a deep layer low stratus No fog at the surface A delicate balance: that is why one valley can be fogbound while a town a few kilometres away stays clear.
Chapter 7 · Visibility and Fog
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
Radiation fog forms on clear nights when the ground loses heat by radiation and cools the air touching it below its dew point. The wind decides what happens. In a flat calm there is no mixing, so only a thin film of air next to the ground is cooled, and the moisture is simply deposited as dew, or frost if it is cold enough. With a light wind, about two to eight knots, gentle turbulence spreads the cooling through a shallow layer, perhaps a few hundred feet deep, and that whole layer reaches its dew point: radiation fog. With a strong wind, mixing spreads the cooling through such a deep layer that the temperature never falls far enough, and at most a sheet of low stratus forms at the top of the mixed layer. Because the balance between cooling and stirring is so delicate, and depends on wind and terrain, one place can be fogbound while a neighbouring place stays clear.
Recipe for radiation fog
Favourable conditions High humidity Moist air needs little cooling to reach its dew point. Hygroscopic nuclei let fog start even below 100% RH .
Clear sky No cloud blanket, so the ground radiates its heat away and cools as much as possible overnight.
Light wind About 2–8 kt (3–7 kt is ideal): enough to stir a shallow layer, not enough to mix it away.
Stable air A ground inversion keeps the cooling and moisture in a shallow layer near the surface.
Where Over land , never over the open sea. Valleys, river banks and damp ground are favourite spots.
Pressure pattern Highs (anticyclones), ridges and cols : weak gradients, light winds, subsidence, clear skies.
Not with A steep pressure gradient and strong low-level winds, or a cloudy night.
Season in India A winter hazard (December to February), especially after a western disturbance has brought rain and then cleared.
Chapter 7 · Visibility and Fog
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the recipe for radiation fog. First, high humidity, so that only a little cooling is needed to reach the dew point; in polluted air, hygroscopic particles can even start condensation before the humidity reaches one hundred per cent. Second, a clear sky, so the ground can radiate freely and cool as much as possible. Third, a light wind, roughly two to eight knots, with three to seven knots ideal. Fourth, stable air with a ground inversion, which keeps the cooling confined to a shallow layer. Radiation fog forms over land, not over the open sea, because the sea hardly cools at night. The best pressure patterns are anticyclones, ridges and cols, where the gradient is weak, winds are light, the air subsides and skies are clear. A steep gradient with strong winds prevents it. In India it is a winter hazard, especially after a western disturbance has brought rain and then moved away, leaving moist ground under clearing skies.
Timing and depth
The life of a radiation fog Forms at night; often forms or thickens around sunrise , when the temperature is lowest and the wind picks up slightly Usually clears 2–3 hours after sunrise as the sun warms the ground; a deep fog may last till about midday It often lifts into low stratus before finally dispersing Depth: a few hundred feet up to about 1500 ft , rarely 1 km, with a sharp top and clear air above India: north-west India, UP, Bihar, Jharkhand, Chhattisgarh, Bengal and Assam ; almost daily in winter in the Brahmaputra valley Fog thickest around sunrise Lifts into stratus Temperature Minimum just after sunrise 18 00 06 09 12 h clears 2 to 3 hours after sunrise Local time
Chapter 7 · Visibility and Fog
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Radiation fog follows a daily rhythm. It forms during the night as the ground cools, and it often forms, or thickens suddenly, around sunrise. That is because the lowest temperature of the night comes just after sunrise, and the light breeze that picks up at the same time stirs the cold air a little more deeply. Once the sun warms the ground, the fog usually clears two to three hours after sunrise; a deep fog may take until about midday. It often lifts into a sheet of low stratus before finally breaking up. The fog itself is shallow, from a few hundred feet up to about fifteen hundred feet, rarely a kilometre, with a sharp top and clear air above. In India the worst areas are north-west India, Uttar Pradesh, Bihar, Jharkhand, Chhattisgarh, Bengal and Assam. In the Brahmaputra valley it is almost a daily winter feature, where plenty of moisture and cold air draining down the hills combine.
Fog in India
The winter fog belt of north India 70°E 75°E 80°E 85°E 90°E 95°E 20°N 25°N 30°N 35°N PAKISTAN NEPAL CHINA (TIBET) BANGLADESH MYANMAR Western disturbance Amritsar Delhi Lucknow Patna Kolkata Guwahati Varanasi Indo-Gangetic plains Brahmaputra valley Dense winter fog belt WD: rain, then clearing When the fog comes Oct Nov Dec Jan Feb Mar peak late December to January A typical foggy day at a north Indian airport 21 00 03 06 09 12 h fog forms densest lifts, clears
Chapter 7 · Visibility and Fog
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is where fog matters most in India. The shaded belt is the Indo-Gangetic plains, from Punjab and Delhi through Uttar Pradesh and Bihar to West Bengal, with a second belt in the Brahmaputra valley of Assam. Through the winter these plains are flat, moist and often under a weak high, with light winds and clear nights: the perfect recipe for radiation fog. The worst spells usually follow a western disturbance. It brings rain that wets the ground, then moves away eastward, leaving clear skies, light winds and plenty of moisture. Airports such as Amritsar, Delhi, Lucknow, Varanasi, Patna, Kolkata and Guwahati can then stay below landing minima for hours. The season runs from about November to February, with the peak in late December and January. On a typical foggy day the fog forms around midnight, is densest around sunrise, when the runway visual range is lowest, and lifts and clears by mid-morning.
Advection fog
Warm moist air over a cold surface Forms when warm, moist air moves horizontally over a surface colder than its dew point Forms over land and sea , and at any time of day or night Unlike radiation fog it can persist with moderate winds and under cloud In India: winter coastal fogs of Bengal and Odisha (advection plus radiation), the Brahmaputra valley, the Sundarbans, coastal belts and peninsular hills Warm moist air over cold ground can give fog and stratus Warm, moist air moving with the wind Advection fog cooled from below to its dew point Sea 27 °C · dew point 23 °C Cold land 18 °C Day or night land or sea
Chapter 7 · Visibility and Fog
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Advection fog forms in a completely different way. Advection means horizontal movement. Warm, moist air from elsewhere is carried by the wind over a surface that is colder than its dew point. The air is cooled from below, and if the wind is enough to mix the cooling through the lowest layer, fog forms. Because it does not depend on night-time radiation, advection fog can form over land or over the sea, by day or by night, and it can persist with moderate winds and under a cloudy sky. In India, the winter fogs along the coasts of Bengal and Odisha come from a mixture of advection and radiation. The Brahmaputra valley, the Sundarbans, the coastal belts and the hills of the peninsula also see advection fog. Remember the classic exam answer: warm, moist air moving over a cold surface gives advection fog and stratus.
Other kinds of fog
Steaming, frontal, upslope and inversion fog Steaming fog Cold air over warm water . Vapour from the warm sea condenses in the cold air above, like steam: sea smoke . High latitudes, Arctic, Iceland, Norway.
Frontal fog Continuous rain ahead of a front saturates the air near the ground, or the cloud base lowers to the surface. Most common with a warm front .
Upslope fog Moist air forced up a slope of hills or rising plains cools adiabatically to its dew point.
Inversion fog In an anticyclone, air cooled by subsidence and trapped under an inversion meets a warm, moist surface and saturates.
Chapter 7 · Visibility and Fog
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are a few other types to know. Steaming fog is the reverse of advection fog: very cold air flows over much warmer water. Water evaporates from the warm surface and immediately condenses in the cold air above, so the sea seems to steam. Over the sea it is called sea smoke, and it is common in high latitudes, over the Arctic and around Iceland and Norway. Frontal fog forms where continuous rain ahead of a front falls into cooler air near the ground and saturates it, or where the cloud base lowers right down to the surface as the front passes. It is most common with a warm front, which has the long belt of steady rain. Upslope fog forms when moist air is forced up a slope, of hills or of gently rising plains, and cools by expansion to its dew point. And inversion fog occurs in an anticyclone, where subsiding air trapped under an inversion comes into contact with a warm, moist surface.
Clearing fog artificially
Fog dispersal Thermal method : heat the air above its dew point so the droplets evaporateUsed with burners along runways in the Second World War; it worked but was very expensive Hygroscopic nuclei : seed the fog with particles that absorb water, lowering the RH so the fog thinsDry ice, silver iodide or propane : in supercooled fog they cause freezing and the crystals fall outIn practice, airports rely on low-visibility procedures and CAT II/III ILS Heat Heat the air lift it above the dew point worked, but very costly Hygroscopic nuclei Seed with salt-like nuclei they absorb water, RH falls Dry ice or silver iodide Freeze supercooled fog ice crystals grow, fall out
Chapter 7 · Visibility and Fog
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Can fog be cleared artificially? There are three ideas. The thermal method heats the air above its dew point so that the droplets evaporate. During the Second World War, rows of burners alongside runways did clear fog for returning bombers, but the method used enormous amounts of fuel and was abandoned. The second idea is to seed the fog with hygroscopic particles, which absorb water and lower the relative humidity, so the fog thins. The third works only in supercooled fog: seeding with dry ice, silver iodide or propane makes the droplets freeze into ice crystals, which grow and fall out. In practice, modern airports do not try to clear fog. They rely on low-visibility procedures and category two and three instrument landing systems.
Summary
What to take into the exam Visibility Black object against bright sky by day; ≈1000 cd lights at night. Horizontal, at the airfield.
RVR What the pilot on the centre line sees. Reported when vis or RVR < 1500 m. Transmissometer.
Haze, mist, fog Haze ≤ 5000 m (dry). Mist 1000–5000 m. Fog < 1000 m, RH ≈ 100%, stratus on the ground.
Dust and ash Dust haze: summer, worse by day, widespread. Volcanic ash: nil visibility, engine damage.
Slant visibility Shallow fog: runway seen overhead, lost on approach.
Radiation fog Land, night, clear sky, light wind 2–8 kt, moist, inversion; highs and cols; winter after a WD.
Its timing Thickest at sunrise; clears 2–3 h after; lifts to stratus; up to ≈1500 ft deep.
Other fogs Advection: warm moist air over cold surface, land or sea, any time. Steam: cold over warm. Frontal: warm front.
Chapter 7 · Visibility and Fog
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us gather it up. Visibility is judged with dark objects against a bright sky by day and with lights of about a thousand candela by night. RVR is what a pilot on the runway centre line can see, reported when visibility or RVR is below fifteen hundred metres, and measured with a transmissometer. Haze is five thousand metres or less with dry particles, mist one to five kilometres, and fog less than one thousand metres with the air saturated. Dust haze is a summer, daytime and widespread problem, and volcanic ash is the most dangerous of all. In shallow fog you may see the runway overhead but lose it on approach. Radiation fog needs land, a clear night, light wind, moist air and an inversion, under a high or col; it is thickest at sunrise and clears two to three hours later. Advection fog forms when warm, moist air crosses a cold surface, over land or sea, at any time.