Principles of Flight · Chapter 2
The Atmosphere and Airspeeds Static pressure, temperature and density, the standard atmosphere, dynamic pressure, and how the airspeed indicator turns pressure into IAS, CAS, EAS and TAS.
0 10 20 30 40 50 thousand ft temperature density −56.5 °C σ = ¼ at 40 000 ft © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to chapter two. An aeroplane flies in the atmosphere, and everything the wing does depends on the air around it: its pressure, its temperature, and above all its density. In this chapter we look at those properties and at the standard atmosphere that every instrument and performance chart is built on. Then we meet dynamic pressure, half rho V squared, the quantity behind every aerodynamic force, see how the airspeed indicator measures it, and untangle indicated, calibrated, equivalent and true airspeed, Mach number and the V-speeds.
Chapter 2 roadmap
The air, and how we measure our speed through it 1 · Properties of air Mass, compressibility, viscosity, static pressure and temperature .
2 · Density ρ ∝ p ÷ T, the effect of humidity, and why density falls with height .
3 · The standard atmosphere ISA values: 15 °C, 1013.25 hPa, 1.225 kg/m³ , the lapse rate and the table.
4 · Dynamic pressure q = ½ ρ V² , total = static + dynamic, worked numbers.
5 · The airspeed indicator Pitot and static, IAS → CAS → EAS → TAS , the errors.
6 · Mach and V-speeds Speed of sound, Mach number , MCRIT , and which airspeed each V-speed is.
Chapter 2 · The Atmosphere and Airspeeds
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the plan for chapter two. We begin with the physical properties of air: it has mass, it can be compressed, and it flows easily. Then static pressure and temperature, and how both change as we climb. Part two is density, the most important property of all, and the three things that change it. Part three is the standard atmosphere, the agreed average that instruments and performance charts are built on. Part four introduces dynamic pressure, half rho V squared, which sits behind every aerodynamic force. In part five we see how the airspeed indicator measures it, and follow the chain from indicated to calibrated, equivalent and true airspeed. Finally, the speed of sound, Mach number, and which kind of airspeed the V-speeds are.
Part 1 · The air
The air is what the wing works on The atmosphere is the medium the aeroplane flies in; the wing changes its properties to make lift The most important property is density , how "thick" the air is Lower density means a smaller mass flow (kg/s) over the wing at the same speed To keep the same lift in thinner air, the aeroplane must fly faster through the air Faster flow restores the mass flow, and with it the lift Sea level: dense air mass flow 100% High: thin air, same TAS mass flow 55% High: thin air, higher TAS mass flow 100%
Chapter 2 · The Atmosphere and Airspeeds
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
The atmosphere is the medium an aeroplane flies in, and the wing makes lift by changing the properties of the air flowing past it. Of all those properties, the most important is density, which you can think of as how thick the air is. Here is an idea worth keeping in the back of your mind: mass flow, the number of kilograms of air flowing over the wing every second. A given mass flow produces the lift we need. If the density falls, say at a high-altitude airfield or high in the cruise, then at the same speed fewer kilograms pass over the wing each second, and lift falls. To get the lift back, the aeroplane must move through the air faster. The faster flow restores the mass flow, and the lift returns to its previous value. That is why true airspeeds are so much higher at altitude.
Physical properties
Air has substance Air has mass ; moving air has kinetic energy : a 100 kt wind can wreck buildings Air is a compressible fluid : it flows and changes shape under tiny pressure differences It always flows towards lower pressure Its viscosity is very low : small forces move the molecules relative to each other Because it is compressible, the lower layers hold most of the mass Up to 40 000 ft, pressure falls steadily; temperature falls only to about 36 000 ft , then stays constant 0 10 20 30 40 50 thousand ft p ≈ 500 hPa near 18 000 ft: half the atmosphere is below temperature stops falling Air is compressible, so the weight above squeezes the lower layers: densest at the bottom
Chapter 2 · The Atmosphere and Airspeeds
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air may look like nothing, but it has substance. It has mass, not much compared with water or metal, but a lot when you consider the volumes involved. And moving air has kinetic energy: a wind of one hundred knots can wreck buildings. Air is a compressible fluid. It flows and changes shape in response to even tiny pressure differences, always moving towards the lower pressure, and its viscosity is so low that very small forces can move its molecules past one another. Because air can be squeezed, the weight of the air above compresses the layers below, so the lower atmosphere holds by far the greater part of the total mass. In the height band where most aircraft fly, up to about forty thousand feet, pressure falls steadily all the way up, while temperature falls only to about thirty-six thousand feet and then stays constant.
Static pressure
The weight of the air above Static pressure (p) : the result of the weight of the atmosphere pressing on the air beneathCalled static because of the air’s stationary presence ; it is always acting It pushes with the same force per square metre on every surface of the aeroplane Unit N/m² = 1 pascal; aviation uses the hectopascal : 1 hPa = 100 Pa = 1 mb About 1 013 hPa (≈ 30 in Hg) at sea level, varying day to day; the lower you are, the higher it is thin air dense air weight of the air above acts equally on every surface p in N/m² (Pa); 1 hPa = 1 mb ISA sea level 1013.25 hPa ≈ 29.92 in Hg
Chapter 2 · The Atmosphere and Airspeeds
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Static pressure is the pressure caused by the weight of all the air above pressing down on the air beneath. We call it static because it is there simply because the air is present, whether or not anything is moving. An aircraft always has static pressure acting on it, on the ground or in the air. And it pushes equally on every surface, with the same force on each square metre, top, bottom, front and back. The SI unit is the newton per square metre, called the pascal. That is a small unit, so aviation uses the hectopascal, one hundred pascals, which is the same as the old millibar. At sea level static pressure is roughly one thousand and thirteen hectopascals, or about thirty inches of mercury, and it changes from day to day with the weather. The lower the altitude, the more air there is above you, and the greater the pressure.
Temperature
Temperature falls, then stops falling Measured in °C (from the freezing point of water) or kelvin (from absolute zero) 0 °C = 273 K ; gas calculations always use kelvinTemperature falls with altitude up to about 36 000 ft Above that, in the lower stratosphere, it stays constant (−56.5 °C in ISA) Colder air is denser, other things being equal 0 10 000 20 000 30 000 40 000 50 000 -60 -40 -20 0 +20 tropopause 36 090 ft (11 km) +15 °C −56.5 °C constant −1.98 °C per 1 000 ft temperature (°C) · altitude (ft)
Chapter 2 · The Atmosphere and Airspeeds
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
Temperature is measured in degrees Celsius, counted from the freezing point of water, or in kelvin, counted from absolute zero. Zero degrees Celsius is two hundred and seventy-three kelvin, so to convert you add two hundred and seventy-three. Whenever temperature appears in a gas formula, such as the density law or the speed of sound, it must be in kelvin. As you climb, the temperature falls, at roughly two degrees for every thousand feet in the standard atmosphere, until you reach the tropopause at about thirty-six thousand feet. Above that, in the lower stratosphere, it stops falling and stays constant, at minus fifty-six point five degrees in the standard atmosphere. On its own, colder air is denser air, which is good for performance. But as we will see on the next slides, falling pressure has the bigger effect.
Part 2 · Density
Density: mass per unit volume Density (ρ, rho) , kg/m³: the mass of air in a given volumeIt depends on static pressure, temperature and humidity From the gas law, ρ ∝ p ÷ T (T in kelvin) Density falls if pressure falls, if temperature rises, or if humidity rises ISA sea level: ρ₀ = 1.225 kg/m³ ρ ∝ p ÷ T Static pressure falls → density falls Temperature rises → density falls Humidity rises → density falls Density: mass per unit volume, kg/m³ ISA sea level ρ₀ = 1.225 kg/m³
Chapter 2 · The Atmosphere and Airspeeds
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Density, written with the Greek letter rho, is mass per unit volume, measured in kilograms per cubic metre. You can picture it as the number of air molecules packed into a given space. Three things change it: static pressure, temperature and humidity. The ideal gas law tells us that density is proportional to pressure and inversely proportional to absolute temperature. So if the pressure falls, the molecules spread out and density falls. If the temperature rises, the air expands and density falls. And, perhaps surprisingly, if the humidity rises, density also falls; we will see why in a moment. A useful number to learn: in the standard atmosphere at sea level, density is one point two two five kilograms per cubic metre. A classic wrong answer in the exam says density is proportional to temperature and inversely proportional to pressure. It is the other way round.
Density and altitude
Why density falls as you climb 0 10 000 20 000 30 000 40 000 50 000 0% 25% 50% 75% 100% temperature (K) pressure density per cent of ISA sea-level value · altitude in feet At 40 000 ft Temperature -56.5 °C 75% of 288 K Pressure 188 hPa 19% Density 0.302 kg/m³ σ ≈ ¼ Pressure wins: density falls
Chapter 2 · The Atmosphere and Airspeeds
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
As you climb, two things happen to the air at once. The pressure falls, which on its own reduces density. The temperature also falls, which on its own would increase density. Which wins? The graph, computed from the standard atmosphere, gives the answer. Absolute temperature only falls from two hundred and eighty-eight kelvin to about two hundred and seventeen, that is, to about seventy-five per cent. Pressure falls much faster, to under a fifth of its sea level value at forty thousand feet. So the pressure effect dominates, and density falls continuously with height, reaching only about a quarter of its sea level value at forty thousand feet. In the exam, the correct statement is that density decreases with altitude because of the decreasing static pressure. The falling temperature partly offsets that, but never overcomes it.
Humidity
Moist air is lighter air Water vapour molecules (H₂O, mass 18) are lighter than nitrogen (28) and oxygen (32) Water vapour has about ⅝ of the density of dry air Adding vapour replaces heavy molecules with light ones: humid air is less dense The effect matters most at take-off and landing Hot, high and humid: the worst case for performance Dry air same number of molecules Humid air same number of molecules N₂ (28) O₂ (32) H₂O (18): lighter Water vapour is about ⅝ the density of dry air, so humid air is LESS dense
Chapter 2 · The Atmosphere and Airspeeds
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Why should moist air be less dense than dry air? It sounds wrong, because we think of water as heavy. But we are talking about water vapour, a gas, not liquid water. At the same pressure and temperature, a given volume of gas always holds the same number of molecules. A water molecule has a mass of about eighteen units, much less than nitrogen at twenty-eight or oxygen at thirty-two. So when water vapour is added to air, light molecules take the place of heavier ones, and the mass in each cubic metre falls. Water vapour has only about five eighths of the density of dry air. The effect is fairly small, and it matters most during take-off and landing, close to the ground where the air is warm and moist. Combine heat, high elevation and humidity, and you have the worst case for aircraft performance.
Part 3 · The standard atmosphere
The ICAO standard atmosphere The real atmosphere is never constant, so we use an agreed average : the ISA Used to calibrate pressure instruments and to compare aircraft performance Sea level: 15 °C , 1013.25 hPa , 1.225 kg/m³ Lapse rate 1.98 °C per 1 000 ft (about 2 °C) up to 36 090 ft (11 000 m) Above that, temperature constant at −56.5 °C ICAO standard atmosphere Temperature at mean sea level 15 °C 288.15 K Pressure at mean sea level 1013.25 hPa 29.92 in Hg Density at mean sea level 1.225 kg/m³ σ = 1 Lapse rate 1.98 °C per 1 000 ft (≈ 2 °C) up to 36 090 ft = 11 000 m (the tropopause) then constant at −56.5 °C
Chapter 2 · The Atmosphere and Airspeeds
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
The temperature, pressure and density of the real atmosphere are never the same from one day to the next or from one place to another. So that aircraft performance can be compared fairly, and pressure instruments such as the altimeter and airspeed indicator can be calibrated, the world uses an agreed standard atmosphere, defined by ICAO. It represents average conditions. Learn its sea level values exactly: temperature fifteen degrees Celsius, pressure one thousand and thirteen point two five hectopascals, and density one point two two five kilograms per cubic metre. Temperature falls at one point nine eight degrees per thousand feet, which we usually round to two, up to thirty-six thousand and ninety feet, or eleven thousand metres. Above that the temperature stays constant at minus fifty-six point five degrees. A common trap writes eleven thousand feet instead of eleven thousand metres. Another swaps the units of pressure and density.
The ISA table
Standard atmosphere values to 50 000 ft Altitude (ft) Temperature (°C) Pressure (hPa) Density (kg/m³) Relative density σ 0 15.0 1013.2 1.225 1.00 5 000 5.1 843.1 1.056 0.86 10 000 -4.8 696.8 0.905 0.74 20 000 -24.6 465.6 0.653 0.53 30 000 -44.4 300.9 0.458 0.37 35 000 -54.3 238.4 0.380 0.31 40 000 -56.5 187.5 0.302 0.25 50 000 -56.5 116.0 0.186 0.15
Relative density σ = ρ ÷ ρ₀ . At 40 000 ft, σ ≈ 0.25 : the air is only a quarter as dense as at sea level. Values computed from the ISA model.
Chapter 2 · The Atmosphere and Airspeeds
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the standard atmosphere as a table, calculated from the ISA model. Read down the temperature column: fifteen degrees at sea level, about minus five at ten thousand feet, about minus forty-four at thirty thousand, and minus fifty-six point five from just above thirty-six thousand feet upwards. Pressure falls steadily, to about half its sea level value near eighteen thousand feet and to about one hundred and eighty-eight hectopascals at forty thousand. Density falls with it. The last column is the relative density, sigma, which is simply the density divided by the sea level value. At forty thousand feet sigma is about zero point two five, so the air is only a quarter as dense as at sea level. That one number, a quarter at forty thousand feet, will let you answer a whole family of airspeed questions in a few seconds.
Part 4 · Dynamic pressure
Moving air carries energy: dynamic pressure Moving air has kinetic energy, so it pushes on anything in its path KE of one cubic metre of air: ½ ρ V² joules Bring that air completely to rest and its KE becomes a pressure rise: q = ½ ρ V² (N/m²) Called dynamic because the air is moving relative to the aircraft In moving air the aircraft feels static AND dynamic pressure q sets every aerodynamic force and the air loads on the structure100 kt, sea level 1 656 Pa 200 kt, sea level 6 625 Pa 100 kt TAS, 40 000 ft 408 Pa q = ½ ρ V²: twice the speed, four times the q quarter the density, quarter the q
Chapter 2 · The Atmosphere and Airspeeds
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because air has mass, moving air has kinetic energy, and so it exerts a force on anything in its way. The kinetic energy of one cubic metre of air is half rho V squared, where rho is the density in kilograms per cubic metre and V is the speed in metres per second. Now imagine bringing that cubic metre completely to rest, as happens at the stagnation point on the nose of a wing, or inside a tube facing the airflow. The total energy stays the same, but the kinetic energy turns into pressure. The pressure rises by half rho V squared. We call this dynamic pressure, and give it the symbol q. It is called dynamic because the air is moving relative to the aircraft. An aircraft in moving air always feels both static and dynamic pressure. Dynamic pressure is the one ingredient common to every aerodynamic force: lift, drag and the loads on the structure.
Worked example
Calculating dynamic pressure 100 kt at sea level V ≈ 52 m/s, ρ = 1.225 kg/m³ (100 × 6 080 ÷ 3.28 ÷ 3 600) q = 0.5 × 1.225 × 52² ≈ 1 656 N/m² = 16.56 hPa 200 kt at sea level V ≈ 104 m/s, ρ = 1.225 kg/m³ speed doubled q = 0.5 × 1.225 × 104² ≈ 6 625 N/m² four times as much 100 kt TAS at 40 000 ft V ≈ 52 m/s, ρ = 0.302 kg/m³ density about a quarter q = 0.5 × 0.302 × 52² ≈ 408 N/m² about a quarter On 1 m² of surface, a dynamic pressure q gives a force of q newtons (force = pressure × area)
Chapter 2 · The Atmosphere and Airspeeds
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put numbers into the formula. Take air flowing at one hundred knots, about fifty-two metres per second, at sea level density of one point two two five. Half times one point two two five times fifty-two squared gives about one thousand six hundred and fifty-six newtons per square metre, or about sixteen and a half hectopascals. Double the speed to two hundred knots, one hundred and four metres per second, and the dynamic pressure becomes about six thousand six hundred and twenty-five: four times as much, because speed is squared. Now fly the same true airspeed of one hundred knots at forty thousand feet, where the density is about a quarter. The dynamic pressure is only about four hundred and eight newtons per square metre, a quarter of the sea level value. And because force equals pressure times area, a dynamic pressure q acting on one square metre gives a force of q newtons.
Key fact
Total pressure = static + dynamic Static pressure is always present, so dynamic pressure cannot be measured on its own Static + dynamic is called total pressure , also stagnation or pitot pressure Total − static = dynamic : subtracting static leaves qConstant IAS means constant dynamic pressure q depends on density and TAS , so everything that changes density matters static 101 325 Pa dynamic 1 656 Pa total p + ½ ρ V² = total total − p = ½ ρ V² (100 kt, ISA sea level) The dynamic part is small, but it is what flies the aeroplane
Chapter 2 · The Atmosphere and Airspeeds
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the key fact. A pilot needs to know how much dynamic pressure is available, because that is what the wing uses. But we can never measure dynamic pressure by itself, because static pressure is always there too. What we can measure is the sum of the two, which we call total pressure; it is also known as stagnation pressure or pitot pressure. Total pressure equals static plus dynamic, so rearranging, total minus static gives dynamic pressure. That subtraction is exactly what the airspeed indicator does. Look at the size of the numbers: at one hundred knots the dynamic pressure is only about one and a half per cent of the static pressure, yet it is this small slice that holds the aeroplane up. Because dynamic pressure depends on density and true airspeed, everything that changes density, temperature, pressure and humidity, matters in every phase of flight.
Part 5 · The airspeed indicator
Measuring dynamic pressure fuselage Pitot tube: open end faces the airflow senses total pressure = static + dynamic static vent Static vent: hole in a surface parallel to the flow, senses static pressure only capsule case at static KNOTS needle shows (pitot − static) = ½ ρ V² Calibrated at ISA sea-level density, 1.225 kg/m³ The airspeed indicator is a pressure gauge The ASI shows the square root of q , scaled in knots. It reads true airspeed only when the density is 1.225 kg/m³ .
Chapter 2 · The Atmosphere and Airspeeds
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
How do we present dynamic pressure to the pilot? A tube, open at the front, is mounted where it meets undisturbed air. This is the pitot tube, and the pressure inside it is static plus dynamic: pitot pressure. Next we need the static pressure alone. A small hole in a surface parallel to the airflow, the static vent, senses just that. Pitot pressure is piped into a thin capsule inside the instrument, and static pressure fills the sealed case around it. The two static pressures cancel, so the capsule expands and contracts only with dynamic pressure, and a linkage moves the needle. The scale is made to show the square root of dynamic pressure, in knots, so if the indicated airspeed doubles, the true speed doubles too, at a given density. But the instrument is calibrated for sea level standard density, so it only shows true airspeed when the density is one point two two five.
Relationships between airspeeds
IAS, CAS, EAS and TAS IAS what the ASI shows instrument + position error CAS true q at low speed compressibility error EAS true q at high speed density ÷ √σ TAS speed through the air Correct, correct, correct: from what you read to how fast you go Compressibility makes the ASI over-read at high speed, so EAS is less than CAS TAS = EAS ÷ √σ: in thin air TAS is greater than EAS
Chapter 2 · The Atmosphere and Airspeeds
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now the chain of airspeeds. Indicated airspeed, I A S, is simply what the airspeed indicator shows. Correct it for instrument error and position error and you get calibrated airspeed, C A S, an accurate measure of dynamic pressure when the aircraft is flying slowly. At high speed there is another problem: the air rammed into the pitot tube is compressed, so the instrument shows too much dynamic pressure and over-reads. Correct for this compressibility error as well and you get equivalent airspeed, E A S, an accurate measure of dynamic pressure at high speed. Finally, correct for density, by dividing E A S by the square root of the relative density, and you get true airspeed, T A S, the actual speed through the air. Remember the phrase: true airspeed is the only real speed; all the others are really pressures.
Errors and corrections
Why IAS is not the same as EAS IAS CAS EAS ± instrument, position flight-test chart − compressibility calculated measures ½ ρ V² exactly Instrument error Imperfections in design and manufacture; varies between instruments. Very small today, and included in the calibration chart .
Position (pressure) error The static vent senses local , not free-stream, pressure; the pitot may be inclined to the flow. Changes with angle of attack , flap, gear and ground effect, so with speed.
Compressibility error At high speed q exceeds ½ ρ V² by a factor set by Mach number, so the ASI over-reads . Found by calculation.
Chapter 2 · The Atmosphere and Airspeeds
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three errors separate the needle from the true dynamic pressure. Instrument error comes from imperfections in design and manufacture and varies from one instrument to another; today it is very small and is simply included in the aircraft’s calibration chart. Position error, also called pressure error, is the big one at low speed. The static vent may sit where the aircraft itself disturbs the flow, so it senses local rather than free-stream pressure, and this changes with flap, landing gear and even the nearness of the ground. The pitot tube may also be inclined to the flow at high angles of attack and under-read. Because these effects depend on angle of attack, they depend on speed. Both are measured in flight tests and given on a chart. Compressibility error appears at high speed, where the air in the pitot is squeezed and the instrument over-reads; it is found by calculation. After all three corrections we have equivalent airspeed.
True airspeed
TAS = EAS ÷ √σ: the higher you go, the faster you fly 0 5 10 15 20 25 30 35 40 45 200 300 400 500 600 EAS 250 kt held constant TAS ≈ 504 kt at 40 000 ft altitude (thousand feet, ISA) knots TAS = EAS ÷ √σ At 40 000 ft, σ ≈ 0.25 √0.25 = 0.5 TAS = 250 ÷ 0.5 ≈ 500 kt Same EAS, same dynamic pressure, same air loads but twice the true speed
Chapter 2 · The Atmosphere and Airspeeds
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
True airspeed equals equivalent airspeed divided by the square root of the relative density. In the climb, if the pilot holds a constant equivalent airspeed, the dynamic pressure stays constant, so the wing and structure feel the same air loads, but the true airspeed rises steadily as the air thins. At forty thousand feet the relative density is about a quarter, and the square root of a quarter is a half, so true airspeed is about twice the equivalent airspeed. Two hundred and fifty knots equivalent becomes about five hundred knots true. This is why so many handling qualities depend on equivalent airspeed rather than true airspeed, and why it is often more useful for the pilot to read E A S directly. The same idea works on the ground: from a hot, high or humid airfield, the same indicated speed means a higher true speed, so the take-off run is longer.
Speed of sound and Mach number
Mach number = TAS ÷ local speed of sound Sound is weak pressure waves spreading out from a source Their speed is proportional to √ absolute temperature ; colder air, slower sound ISA sea level: about 340 m/s, 661 kt ; at the tropopause about 574 kt Mach number M = TAS ÷ a , using the local speed of soundTAS at four tenths of a gives a Machmeter reading of M 0.4 0 10 20 30 40 50 540 560 580 600 620 640 660 680 661 kt at 15 °C 574 kt at −56.5 °C thousand ft local speed of sound (kt) a ∝ √T (kelvin) · M = TAS ÷ a 480 kt TAS at 36 000 ft: M = 480 ÷ 574 ≈ 0.84
Chapter 2 · The Atmosphere and Airspeeds
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Sound is a series of weak pressure waves spreading out in every direction from their source. The speed at which they travel depends only on the temperature of the air: it is proportional to the square root of the absolute temperature. So the colder the air, the slower sound travels. On a standard day at sea level, sound travels at about three hundred and forty metres per second, about six hundred and sixty-one knots. At the tropopause, at minus fifty-six point five degrees, it has fallen to about five hundred and seventy-four knots, and above that it stays constant because the temperature does. At high speeds and high altitudes what matters is how fast the aircraft is going compared with the local speed of sound. That ratio is the Mach number: true airspeed divided by the local speed of sound. For example, four hundred and eighty knots true at thirty-six thousand feet is Mach zero point eight four. Note that pressure and density do not appear: only temperature.
Critical Mach number
MCRIT : the first touch of sonic flow Air accelerates over the wing, so local flow is faster than the aircraft MCRIT : the aircraft’s Mach number when the airflow somewhere on it first reaches the local speed of sound Usually first at the point of maximum thickness on the upper surface Above MCRIT a supersonic region and a shock wave appear Note: MCRIT is a free-stream Mach number, not a local speed M 0.78 local flow M > 1 shock wave MCRIT : free-stream Mach number at which local flow first reaches M 1 Typical subsonic transport: MCRIT ≈ 0.7 to 0.8
Chapter 2 · The Atmosphere and Airspeeds
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air speeds up as it flows over a wing, so the flow over the upper surface is faster than the aircraft itself. As the aircraft flies faster, there comes a point where the air somewhere on it, usually near the point of maximum thickness on the top of the wing, first reaches the local speed of sound. The aircraft’s Mach number at that moment is the critical Mach number, M CRIT. Watch the scene as the Mach number is raised: at first the flow is everywhere subsonic, then a small supersonic region appears over the upper surface, ending in a shock wave. Be precise about the definition in the exam. M CRIT is the free-stream Mach number of the aircraft, not the speed of the local airflow, and it is not the speed at which the aircraft itself becomes supersonic. Typical airliners have a critical Mach number of around zero point seven to zero point eight.
Which airspeed is a V-speed?
V-speeds are CAS; VMO is EAS; all are given as IAS Speed Kind of airspeed Why VS , V1 , VR , V2 CAS Low-speed operation: position error matters, compressibility does not VMD , VMC , VYSE CAS Also low-speed values VMO EAS A high speed: the compressibility correction is significant In the flight manual IAS All corrections already applied, so the pilot flies the figure on the dial Constant IAS constant q Automatically compensates for changes in density TAS speed through the air Needed for navigation and Mach number
Hot, high or humid airfield: the same IAS (same q) needs a higher TAS , so the take-off and landing runs are longer.
Chapter 2 · The Atmosphere and Airspeeds
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Which kind of airspeed is each V-speed? Speeds such as V S, V one, V R, V two, V M D, V M C and V Y S E all relate to low-speed operation, where position error matters but compressibility does not, so they are calibrated airspeeds. V M O, the maximum operating speed, is a high speed, where compressibility is significant, so it is an equivalent airspeed. But the pilot never has to apply any of these corrections: the manufacturer does that, and every one of these speeds is printed in the flight manual as an indicated airspeed, the figure you actually see on the dial. Remember too that flying a constant indicated airspeed keeps the dynamic pressure constant, so it automatically allows for density changes. On a hot, high or humid airfield, the same indicated speed means a higher true speed, and longer take-off and landing distances.
Summary
What to take into the exam Static pressure Weight of air above; acts on all surfaces; N/m², hPa = mb. Falls with height.
Density ρ ∝ p/T. Falls with lower p, higher T, higher humidity. Falls with height: pressure dominates .
ISA 15 °C, 1013.25 hPa, 1.225 kg/m³; −1.98 °C/1 000 ft to 36 090 ft (11 km); then −56.5 °C. σ ≈ ¼ at 40 000 ft.
Dynamic pressure q = ½ ρ V². Double V → 4 × q. Total = static + dynamic (pitot, stagnation).
ASI Pitot to capsule, static to case; needle shows q. Calibrated at ISA SL density.
Airspeeds IAS + instrument & position = CAS; + compressibility = EAS; ÷ √σ = TAS.
Mach a ∝ √T only; 661 kt ISA SL. M = TAS/a. MCRIT : local flow first sonic.
V-speeds CAS, except VMO (EAS); all published as IAS. TAS is the only true speed.
Chapter 2 · The Atmosphere and Airspeeds
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull chapter two together. Static pressure is the weight of the air above; it acts equally on every surface and falls with height. Density is proportional to pressure over absolute temperature; it falls when pressure falls, when temperature rises, and when humidity rises, and it falls with height because the pressure effect dominates. The standard atmosphere has fifteen degrees, one thousand and thirteen point two five hectopascals and one point two two five kilograms per cubic metre at sea level, a lapse rate of one point nine eight degrees per thousand feet to thirty-six thousand and ninety feet, and a quarter of sea level density at forty thousand feet. Dynamic pressure is half rho V squared. The airspeed indicator measures dynamic pressure. I A S corrected for instrument and position error is C A S, then for compressibility E A S, then for density T A S. V-speeds are calibrated airspeeds, except V M O, which is equivalent, and all are published as indicated airspeeds.