Principles of Flight · Chapter 5
Lift The lift formula and what it really says: dynamic pressure, the lift coefficient, the lift curve, speed, altitude, weight and the shape of the wing.
C L max
angle of attack →
C L
L = ½ ρ V² C L S
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
In this lesson we take the most important formula in principles of flight, lift equals half rho V squared C L S, and learn to read it like a pilot. We will see why the lift coefficient depends on angle of attack, why every speed has its own angle of attack, why the true airspeed must rise as you climb, how weight sets the minimum speed, and how the shape and cleanliness of the wing decide how slowly it can fly.
Lesson map
Reading the lift formula like a pilot 1 · The formula Force coefficients, dynamic pressure and L = ½ ρ V² C L S; lift equals weight.
2 · Speed and height TAS and density, IAS as dynamic pressure, speed against angle of attack, density altitude.
3 · The lift curve C L against α, C L max, a worked example in knots, weight and minimum speed.
4 · Shape and efficiency Camber and thickness, drag and L/D, contamination and flaps.
Chapter 5 · Lift
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
This lesson is all about one formula and what it tells a pilot. In part one we build the formula itself: why any aerodynamic force is a dynamic pressure, times a coefficient, times an area, and why in level flight the lift must equal the weight. In part two we look at speed and height: why the true airspeed must increase as the air thins, why the airspeed indicator really measures dynamic pressure, and why every speed has its own angle of attack. In part three we read the lift curve, including its maximum, and work a full example in knots. And in part four we see how the shape of the section, its drag, any contamination and the flaps change what the wing can do. Have a calculator handy; there are numbers to check.
Part 1 · The formula
What an aerodynamic force depends on Dynamic pressure Airstream velocity and air density give the energy of the flow, ½ ρ V² .
Pressure distribution The shape of the surface and the angle of attack give C L or C D.
Area and the rest Surface area S , the condition of the surface , and compressibility at high Mach numbers.
Chapter 5 · Lift
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Lift and drag depend on a handful of things, and it helps to group them. Airstream velocity and air density together decide how much energy the flowing air carries, and that is captured by the dynamic pressure, half rho V squared. The shape of the surface and the angle of attack decide the pattern of pressure round the section, and that pattern is captured by a coefficient, C L for lift or C D for drag. Watch the live picture: as the angle increases, the pressure pattern changes and so does the coefficient. Then there is the surface area the pressures act on; a bigger wing gives a bigger force for the same pressure difference. Finally, the condition of the surface matters, as we will see near the end, and at high Mach numbers compressibility joins in, which is a topic for later lessons.
Part 1 · The formula
Force = dynamic pressure × coefficient × area Any aerodynamic force: F = q × C F × S q = ½ ρ V² : like kinetic energy, ½ m V², for each cubic metre of airC F is C L for lift or C D for drag, from the pressure distributionS is the wing’s plan areaSo L = q C L S and D = q C D S
F = q × C F × S
q
dynamic pressure
½ ρ V²
C F
force coefficient
C L or C D
S
surface area
m²
Velocity V and density ρ
→ energy of the airflow, q
Shape and angle of attack
→ pressure pattern, C L or C D
Area S
→ how much surface it acts on
Kinetic energy ½ m V² per unit volume of air becomes ½ ρ V²
Chapter 5 · Lift
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Put those three groups together and any aerodynamic force can be written as dynamic pressure, times a force coefficient, times area. Dynamic pressure, which we call q, is half rho V squared. It looks just like the kinetic energy formula, half m V squared, and that is no accident: it is the kinetic energy carried by each cubic metre of air, and it is the energy available to create pressure differences on the wing. The force coefficient is C L when we are talking about lift and C D for drag, and it comes from the pressure distribution, so from the shape and the angle of attack. S is the plan area of the wing. So lift is q times C L times S, and drag is q times C D times S. Everything else in this lesson is just reading those two short equations carefully.
Part 1 · The formula
The lift equation, term by term
L = ½ ρ V² × C L × S
lift
must balance the weight
air density ρ
falls with altitude
true airspeed V
squared
lift coefficient
set by angle of attack (and shape)
wing area S
fixed (flaps aside)
together, ½ ρ V² is the dynamic pressure, q, which the ASI reads as IAS
The pilot controls lift through speed (V) and angle of attack (C L); density changes with altitude and the area is fixed.
Chapter 5 · Lift
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the lift equation with every term labelled. On the left, lift, which in straight and level flight must balance the weight. Rho is the air density, which falls as you climb. V is the true airspeed, and notice it is squared, so speed has a powerful effect. Half rho V squared together is the dynamic pressure, and the airspeed indicator measures exactly that, so it is shown to you as indicated airspeed. C L is the lift coefficient, which for a given wing is set by the angle of attack, although shape and flaps also play a part. And S is the wing area, which is fixed unless the flaps change it. So in practice the pilot has two levers for lift: speed and angle of attack. If one changes, the other must change too, if the lift is to stay the same.
Part 1 · The formula
In level flight, lift equals weight Most flight is straight and level : lift = weight, thrust = drag At any moment the weight is fixed, so the lift required is fixed Generate it with as little drag as possible : drag costs thrust, and thrust costs fuel L/D measures efficiency; it is greatest at one angle of attack, about 4° on a modern wingC L max and minimum C D are not at L/D max
Lift = Weight
Weight
Thrust = Drag
Drag
Chapter 5 · Lift
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aircraft spends most of its time in straight and level flight, so let us start there. In steady level flight the four forces balance: lift equals weight, and thrust equals drag. At any moment the weight is fixed, so the lift required is fixed too; the question is only how to produce it. Ideally we produce it with as little drag as possible, because drag has to be balanced by thrust, and thrust costs fuel. The ratio of lift to drag is therefore a measure of aerodynamic efficiency. It reaches its maximum at one particular angle of attack, about four degrees for a modern wing, called the optimum angle of attack. Fly there and the required lift comes with the least drag. A useful exam point: neither the maximum lift coefficient nor the minimum drag coefficient occurs at the best lift to drag ratio.
Part 2 · Speed and height
Climbing into thinner air needs more TAS
0
10000
20000
30000
40000
× 1.0
× 1.2
× 1.4
× 1.6
× 1.8
× 2.0
pressure altitude (ft, ISA)
TAS needed for the same IAS
× 1.16
× 1.37
× 1.63
× 2.02
At 40 000 ft
density ρ = 0.302 kg/m³, about ¼ of sea level (1.225)
L = ½ ρ V² C L S
ρ
× ¼
thinner air
V
× 2
so V² × 4
C L
same
α kept for L/D max
S
same
fixed wing area
Dynamic pressure, and so lift, unchanged:
TAS must be about doubled; IAS stays the same.
ISA density ratios computed for each level
Keep IAS constant and the dynamic pressure, and so the lift at a given α, stays constant: the TAS rises automatically .
Chapter 5 · Lift
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air gets thinner as you climb. If the speed through the air stayed the same, less mass of air would flow over the wing each second, and lift would fall. To keep the lift constant at the same angle of attack, the dynamic pressure must stay the same, so the true airspeed must rise. Take forty thousand feet, where the density is about one quarter of the sea level value. A quarter of the density times the speed squared must give the same answer, so the speed squared must be four times bigger and the true airspeed must double. The graph shows the true airspeed needed, as a multiple of the sea-level value, computed from the standard atmosphere: about one point one six at ten thousand feet, one point six at thirty thousand and two at forty thousand. And here is the beauty of it: hold a constant indicated airspeed, and this happens by itself.
Part 2 · Speed and height
The ASI measures dynamic pressure The ASI senses pitot minus static pressure: that is dynamic pressure, q So IAS ∝ √q : same IAS, same q, at any altitude Same IAS + same α → same lift , high or low TAS = IAS ÷ √(ρ/ρ₀): 250 kt IAS at FL 300 is about 409 kt TAS At constant altitude (and below about M 0.4), double the IAS and the TAS doubles
IAS ∝ √q
the ASI measures dynamic pressure (pitot − static)
Sea level
250 kt
FL 100
291 kt
FL 200
342 kt
FL 300
409 kt
IAS 250 kt: same q, same lift at the same α
TAS = IAS ÷ √(ρ / ρ₀)
ISA; ignoring instrument, position and compressibility errors
Chapter 5 · Lift
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
The airspeed indicator does not really measure speed. It measures the difference between pitot pressure and static pressure, and that difference is the dynamic pressure. So indicated airspeed varies with the square root of the dynamic pressure, and the same indicated airspeed always means the same dynamic pressure, whatever the altitude. Combine that with the lift equation: the same indicated airspeed at the same angle of attack gives the same lift, high or low. That is why the pilot flies indicated airspeeds. The bars show two hundred and fifty knots indicated at four levels. The true airspeed grows from two hundred and fifty at sea level to about four hundred and nine knots at flight level three hundred. At a constant altitude, and ignoring compressibility, which only matters above about Mach zero point four, double the indicated airspeed and the true airspeed doubles too.
Part 2 · Speed and height
Density altitude and the take-off run Air density depends on pressure, temperature and humidity A hot day: the altimeter shows pressure altitude, but the air is thinner than ISA The aircraft behaves as if at a higher density altitude It needs a higher TAS for the same lift-off IAS, so a longer take-off run Humidity lowers density too: water vapour is about ⅝ as dense as dry air
HIGH density ALTITUDE
= LOW air density, as if the airfield were higher
ISA sea level, 15 °C
ρ = 1.225
density altitude ≈ 0 ft · TAS for the same IAS × 1.000
Sea level, 25 °C (ISA + 10)
ρ = 1.184
density altitude ≈ 1,200 ft · TAS for the same IAS × 1.017
5000 ft, ISA + 20
ρ = 0.985
density altitude ≈ 7,300 ft · TAS for the same IAS × 1.115
Higher TAS for the lift-off IAS → longer take-off run
Humid air is lighter too: water vapour ≈ ⅝ the density of dry air
Chapter 5 · Lift
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Air density at take-off and landing has a big effect on performance. Density depends on pressure, temperature and humidity. Setting ten thirteen on the altimeter at a sea-level airfield gives a reading of zero, the pressure altitude, but that tells you nothing about temperature. On a twenty-five degree day, ten degrees above standard, the air is less dense, and the wing performs as if it were about eleven or twelve hundred feet higher. We call that a high density altitude; remember it as high density altitude, which means low density. Lift needs the same indicated airspeed, so the true airspeed at lift-off must be higher, and the take-off run longer. A five thousand foot airfield at I S A plus twenty is like seven thousand three hundred feet. Humid air is also less dense, because water vapour weighs only about five eighths as much as dry air.
Part 2 · Speed and height
Every speed has its own angle of attack At constant altitude and weight, lift must stay constant q ∝ V², so C L ∝ 1 / V² Double the speed : q × 4, so C L must fall to ¼ Halve the speed : C L must be 4 × as largeFaster → lower α; slower → higher α
Level flight, constant altitude and weight
speed × 1
q × 1
C L 1.20
α ≈ +8°
speed × 1.41
q × 2
C L 0.60
α ≈ +2°
speed × 2
q × 4
C L 0.30
α ≈ -1°
Double the speed, quarter the C L (cambered section, C L = 0.1 × (α + 4))
Chapter 5 · Lift
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now hold the altitude and the weight constant and change the speed. The lift must stay the same, but the dynamic pressure goes with the speed squared, so the lift coefficient must change in the opposite way: C L varies as one over V squared. If the speed is doubled, dynamic pressure becomes four times greater, so the angle of attack must be reduced until C L is a quarter of its previous value. If the speed is halved, the angle of attack must be increased until C L is four times greater. Watch the live section: as we fly faster, the angle of attack comes down, and when the speed has doubled it is close to minus one degree for this cambered section. So for level flight each speed has one particular angle of attack, and to slow down while holding altitude you must raise the nose.
Part 2 · Speed and height
Worked example: 30% above minimum speed Minimum level-flight speed uses C L max C L ∝ 1/V², so at 1.3 × that speed: C L = C L max ÷ 1.3² 1 ÷ 1.69 = 0.59 : the wing uses 59% of C L max At 1.2 × it is 69%; at 2 × it is 25% The same rule explains the safety margins built into approach speeds
1.0
1.2
1.4
1.6
1.8
2.0
0%
25%
50%
75%
100%
speed as a multiple of the minimum level-flight speed
C L needed, as % of C L max
83%
69%
59%
44%
25%
C L ∝ 1 / V²
1 ÷ 1.3² = 1 ÷ 1.69 = 0.59
Chapter 5 · Lift
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The inverse square rule lets you calculate useful numbers. Suppose we fly in level flight thirty per cent above the minimum level-flight speed, which is the speed at C L max. Thirty per cent above is one point three times. Since C L varies as one over V squared, the lift coefficient needed is C L max divided by one point three squared. One point three squared is one point six nine, and one divided by one point six nine is zero point five nine. So at one point three times the minimum speed, the wing is using only fifty-nine per cent of its maximum lift coefficient, leaving a healthy margin before the stall. The curve shows the pattern: at one point two times, sixty-nine per cent; at one and a half times, forty-four per cent; at twice the minimum speed, just a quarter. This is a favourite exam calculation.
Part 3 · The lift curve
The lift curve: C L against angle of attack
0°
4°
8°
12°
16°
20°
0.0
0.4
0.8
1.2
1.6
angle of attack
C L
C L max = 1.53
critical angle ≈ 16°
stall: lift falls
nearly straight:
C L ∝ α
symmetrical: zero lift at 0°
Each α gives one C L
C L max at the critical angle
Beyond it: separation, stall
Angle for C L max is constant
C L rises almost linearly with α up to C L max at the critical angle ; beyond it the flow separates and lift falls: the stall .
Chapter 5 · Lift
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The lift curve plots lift coefficient against angle of attack, and we will use it throughout the course. This one belongs to a symmetrical section, which is why it passes through zero lift at zero angle of attack. Over most of the range the curve is nearly a straight line: more angle of attack, proportionally more C L. Near the top it rounds over to a maximum, C L max, here one point five three, which occurs at the critical angle of attack, about sixteen degrees. Increase the angle beyond that and the airflow can no longer follow the upper surface; it separates, and C L falls. That is the stall. Three facts to remember. Each angle of attack gives one value of C L. The minimum speed is set by C L max. And for a given configuration the angle of attack for C L max is constant, whatever the weight or speed.
Part 3 · The lift curve
Worked example: from C L to knots
0°
4°
8°
12°
16°
20°
angle of attack
C L
1.532
150 kt
0.863
200 kt
0.552
250 kt
0.384
300 kt
Mass 60 000 kg
L = W = 60 000 × 9.81 = 588 600 N
S = 105 m², ρ = 1.225 kg/m³
V = √( 2 L ÷ (ρ C L S) )
C L 1.532 → 77.3 m/s = 150 kt
C L 0.863 → 200 kt
C L 0.552 → 250 kt
C L 0.384 → 300 kt
1 kt = 1852 m per hour
The lowest level-flight speed, 150 kt, comes from C L max . Each angle of attack has its own speed: faster needs a smaller α.
Chapter 5 · Lift
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put real numbers in. An aircraft of sixty thousand kilograms needs a lift of sixty thousand times nine point eight one, which is five hundred and eighty-eight thousand six hundred newtons. Its wing area is one hundred and five square metres and we are at sea level, where rho is one point two two five. Rearranging the lift equation, V equals the square root of two L divided by rho C L S. At C L max, one point five three two, that gives about seventy-seven metres per second, or one hundred and fifty knots, the lowest speed for level flight. At C L zero point eight six three the answer is two hundred knots; at zero point five five two, two hundred and fifty knots; and at zero point three eight four, three hundred knots. Notice the pattern: double the speed, from one fifty to three hundred, and C L falls to exactly a quarter.
Part 3 · The lift curve
What the lift curve tells the pilot Speed needs α To keep lift constant, any change in dynamic pressure (IAS) must come with a change in angle of attack .
One α per IAS For a constant lift, each IAS requires one specific angle of attack , below C L max.
Minimum speed The minimum dynamic pressure , and so the minimum IAS, is set by C L max , at about 16°.
Critical α is fixed For a given configuration the angle of attack for C L max is constant .
More weight More lift needed: a higher IAS at the same α. The minimum IAS rises with weight.
Pilot’s control By changing α the pilot controls lift, airspeed and drag together.
Chapter 5 · Lift
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us turn the lift curve into rules a pilot can use. First, to keep the lift constant, any change in dynamic pressure, that is indicated airspeed, has to be matched by a change in angle of attack. Second, and it follows, for a constant lift each indicated airspeed needs one specific angle of attack. Third, the minimum dynamic pressure, and so the minimum indicated airspeed, is fixed by C L max, which comes at around sixteen degrees. Fourth, the angle of attack for C L max is constant for a given configuration; it does not change with weight. Fifth, if more lift is needed because the aircraft is heavier, a higher indicated airspeed is needed at the same angle of attack, so the heavier you are, the higher your minimum speed. And finally, by changing the angle of attack the pilot controls lift, airspeed and drag together.
Part 3 · The lift curve
Weight sets the minimum speed A section always stalls at the same angle of attack But the IAS at which that happens depends on weight At C L max, W = q C L max S, so V min ∝ √W 60 t → 150 kt; 40 t → about 122 kt A big jet may burn about half its take-off weight as fuel, so its stall speed falls a lot during the flight
30 t
40 t
50 t
60 t
100 kt
120 kt
140 kt
160 kt
aircraft mass (tonnes)
minimum level-flight speed (at C L max)
150 kt
130 kt
122 kt
106 kt
V min ∝ √W (same α, C L max)
Same wing and configuration: 60 t → 150 kt; 40 t → 122.5 kt
Chapter 5 · Lift
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
A given wing always stalls at the same angle of attack, but the indicated airspeed at which that happens depends on the weight. At C L max the lift equation says weight equals q times C L max times S. With C L max and S fixed, the dynamic pressure needed is proportional to the weight, and since speed goes with the square root of dynamic pressure, the minimum speed goes with the square root of the weight. Our sixty tonne example had a minimum of one hundred and fifty knots. At forty tonnes, the weight ratio is two thirds, the square root of two thirds is about zero point eight two, and the minimum speed falls to about one hundred and twenty-two knots. On a long-haul jet, fuel can be just over half the maximum take-off weight, so the stall speed can change a great deal between take-off and landing.
Part 4 · Shape and efficiency
How thickness and camber change C L max
-4°
0°
4°
8°
12°
16°
20°
0.0
0.4
0.8
1.2
1.6
section angle of attack
section C L
cambered, 12%: C L max 1.65
symmetrical, 12%: C L max 1.27
symmetrical, 6%: C L max 0.75
Thickness 6% → 12%: C L max up about 70%
Camber: higher C L max still,
and lift at small negative α
Thin section: least lift for a
given α, least drag at high speed
Illustrative curves
A higher C L max gives a lower minimum speed. Camber also gives some lift at small negative angles of attack.
Chapter 5 · Lift
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
The shape of the section changes the lift curve. Compare three sections. A thin symmetrical section, six per cent thick, has the lowest maximum lift coefficient. Double the thickness to twelve per cent and C L max rises by about seventy per cent. Now add camber to the twelve per cent section, and C L max rises again. Why? At about the same stalling angle, the cambered section makes the streamtube over the top narrower, with a more gradual change of section, so the air accelerates more and the pressure difference is bigger. That also explains why, at the same angle of attack, a symmetrical section produces less lift than a cambered one, and why the cambered section still produces a little lift at small negative angles. The importance of C L max is simple: the greater it is, the lower the minimum flight speed.
Part 4 · Shape and efficiency
Why airliners have thin wings and big flaps
cruise: thin, efficient at high speed slow flight: flap adds camber, higher C L max
Thick and cambered High C L max, low minimum speed. But more form drag and large twisting moments at high speed, so a lower efficient cruise speed.
Thin section Less lift for a given α and a higher minimum speed , but it can fly faster before shock waves add drag.
Best of both Use a section efficient at high cruise speed , then temporarily add camber with leading- and trailing-edge flaps to fly slowly.
Chapter 5 · Lift
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
So which section should a designer choose? A thick, highly cambered section gives a high C L max and a low minimum speed, but at high speed it makes more form drag and large twisting moments, so the speed at which it cruises efficiently is low. A thin section produces less lift at a given angle of attack and has a higher minimum speed, but it can fly much faster before shock waves form and drag rises sharply. That is attractive for a jet transport, but on its own it would need impossibly long runways. The answer is to use a section that is efficient at high cruise speed, and to increase its camber temporarily when you need to fly slowly, using hinged sections at the leading and trailing edges: the flaps and slats. We will meet those properly in a later lesson; here we just note their purpose.
Part 4 · Shape and efficiency
The drag coefficient against angle of attack Lift acts at 90° to the relative airflow; drag parallel to it, opposite to the flight pathD = q C D S ; C D is drag per unit area ÷ dynamic pressureAt low α, C D is small and changes slowly At higher α the rate of increase grows : the curve steepens Beyond the stalling angle C D rises sharply
-4°
0°
4°
8°
12°
16°
20°
0.0
0.1
0.2
0.3
0.4
angle of attack
C D
C L max
low α: C D small,
changes slowly
rate of increase grows
large rise
past the stall
D = q × C D × S
C D = drag per unit wing area ÷ dynamic pressure
Chapter 5 · Lift
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Drag is the aerodynamic force parallel to the relative airflow and opposite to the flight path, while lift, remember, acts at right angles to the relative airflow. Like lift, it can be written as dynamic pressure times a coefficient times area, with the drag coefficient, C D, being the drag per unit wing area divided by the dynamic pressure. If we plot C D against angle of attack for a typical wing, we get this shape. At low angles of attack, C D is small, and small changes in angle make only small changes in drag. As the angle grows, each extra degree adds more and more drag, so the curve gets steeper and steeper. And beyond the stalling angle, where the flow separates, there is a further large increase in drag. We will split drag into its different kinds in a later lesson; for now, just remember the shape of this curve.
Part 4 · Shape and efficiency
The lift/drag ratio and the optimum angle of attack
-4°
0°
4°
8°
12°
16°
20°
angle of attack
L/D max = 12.5 at 4°
C L max / stall
C L
C D
L/D
Optimum angle of attack
about 4° for a modern wing
C L max is not at L/D max
minimum C D is not at L/D max
Three different vertical
scales: ignore where the
lines cross
L/D rises to a maximum at about 4° , the optimum angle of attack, then falls as α increases towards C L max.
Chapter 5 · Lift
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Divide C L by C D at every angle of attack and you get the lift to drag ratio, a measure of how efficiently the wing produces lift. In this computed example it rises steeply from small angles to a maximum of twelve point five at about four degrees, the optimum angle of attack, and then falls away steadily as the angle increases towards C L max. Fly at any other angle, higher or lower, and the drag for the required lift will be greater. Two warnings. First, the three curves are drawn to different scales, so do not read anything into where they cross. Second, as we said, the best lift to drag ratio is not at the maximum lift coefficient and not at the minimum drag coefficient. At small angles C D is low but C L is lower still, and near C L max the drag has grown faster than the lift.
Part 4 · Shape and efficiency
L/D in numbers At L/D max, drag = weight ÷ L/D: 588 600 ÷ 12.5 = 47 088 N Any other α gives more drag for the same lift A different weight is flown at the same α but a different IAS : lighter → lower IAS Below M 0.4 and in one configuration, weight does not change L/D max Configuration (flaps, gear, spoilers, contamination) does
Weight 588 600 N at L/D max 12.5
Drag = 588 600 ÷ 12.5 = 47 088 N
any other α needs more drag for the same lift
0
10
20
30
40
50
60
Sailplane
25–60
Jet transport
12–20
Prop trainer
10–15
typical L/D max
Weight changes the IAS for L/D max, not L/D max itself
Chapter 5 · Lift
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put a number on efficiency. Our sixty tonne aircraft weighs five hundred and eighty-eight thousand six hundred newtons. If its maximum lift to drag ratio is twelve point five, then flying at the optimum angle of attack its drag is the weight divided by twelve point five: forty-seven thousand and eighty-eight newtons. Fly at any other angle of attack and the drag for that lift is more. If the aircraft is lighter, it can still achieve the same lift to drag ratio of twelve point five, at the same angle of attack, but at a lower indicated airspeed; heavier needs a higher one. So, below about Mach zero point four and in a given configuration, weight does not change L/D max. Configuration does: flaps, gear, spoilers and contamination all add drag. Typical values: sailplanes twenty-five to sixty, jet transports twelve to twenty, propeller trainers ten to fifteen.
Part 4 · Shape and efficiency
Surface condition: roughness lowers C L max C L max is very sensitive to leading-edge roughness Roughness in the front 20% of the chord matters most; further aft, little effect Frost, snow, rain water, dirt and slush all increase roughness In-flight ice, usually at the leading edge, gives a large loss of C L max Lower C L max and stalling angle → higher stall speed
0°
4°
8°
12°
16°
20°
0.0
0.4
0.8
1.2
1.6
angle of attack
C L
smooth wing
frost, dirt, water, slush
leading-edge ice
typical take-off C L
C L max and the stalling angle both fall; the stall speed rises
Chapter 5 · Lift
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Surface irregularities, especially near the leading edge, have a large effect on how a wing performs, and C L max is the most sensitive of all. The rougher the leading edge, the lower the maximum lift coefficient. Roughness further back than about twenty per cent of the chord has little effect on C L max or on the slope of the lift curve, so it is the front of the wing that matters. Frost, snow, even rain water can roughen the surface significantly, and so can dirt or slush thrown up from contaminated taxiways and runways. Ice that forms in flight usually builds at the leading edge and causes a large drop in C L max. Look at the curves: the contaminated wing stalls at a lower angle and at a lower C L, and in the live picture the iced section stalls earlier. The result is a higher stalling speed.
Part 4 · Shape and efficiency
Flaps: more C L max, lower stall speed Purpose of high lift devices: shorter take-off and landing by lowering the minimum speed Flaps increase C L max They also reduce the angle of attack needed for any given C L The stall speed falls in proportion to 1/√C L max Example: C L max 1.6 → 2.4 cuts the stall speed by about 18%
-8°
-4°
0°
4°
8°
12°
16°
20°
0.0
0.5
1.0
1.5
2.0
2.5
angle of attack
C L
clean: C L max 1.6
flaps down: C L max 2.4
same C L 0.8: 12° less α
V S ∝ 1 / √C L max: √(1.6 ÷ 2.4) = 0.82
so the stall speed falls by about 18%
Chapter 5 · Lift
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
High lift devices, such as flaps, slots and slats, exist to shorten the take-off and landing distances by reducing the minimum speed. They do that by raising C L max. The graph compares a clean wing with the flaps down. Extending the flaps increases C L max, here from one point six to about two point four, and it shifts the whole lift curve to the left, so any given lift coefficient is reached at a smaller angle of attack. Watch the live section: as the flap is extended, then extended further, the camber increases and the lift grows at the same angle of attack. Because the stall speed varies as one over the square root of C L max, raising C L max from one point six to two point four reduces the stall speed by the square root of two thirds, about zero point eight two, so roughly eighteen per cent. We return to flaps in detail later.
Summary
What to take into the exam Formula L = ½ ρ V² C L S. Dynamic pressure (IAS), pressure distribution (shape and α), area.
Altitude Thinner air: more TAS for the same lift. Constant IAS keeps q, and lift at a given α, constant.
Speed and α C L ∝ 1/V². Double speed → ¼ C L. Halve speed → 4 × C L. 1.3 V min → 59% C L max.
Lift curve One C L per α. C L max at the critical angle (≈ 16°), which is constant. Minimum IAS set by C L max.
Weight Heavier → higher IAS at the same α; V min ∝ √W. Weight does not change L/D max.
Shape Thicker and cambered: higher C L max. Thin: higher V min, needs flaps, better at high speed.
Efficiency L/D max at about 4°. Not at C L max, not at min C D. Drag = W ÷ L/D.
Surface and flaps Front 20% roughness lowers C L max. Flaps raise C L max and lower α for a given C L.
Chapter 5 · Lift
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. Lift equals half rho V squared C L S: dynamic pressure, which the pilot reads as indicated airspeed, the pressure distribution, set by shape and angle of attack, and the area. As you climb, the air thins and the true airspeed must rise, but holding a constant indicated airspeed keeps the lift constant at a given angle of attack. C L varies as one over V squared: double the speed and C L falls to a quarter, and at one point three times the minimum speed you are using fifty-nine per cent of C L max. Each angle of attack gives one C L, and the critical angle for C L max does not change. A heavier aircraft needs a higher indicated airspeed, so its minimum speed rises with the square root of weight. Thick, cambered sections have a higher C L max; thin ones need flaps. L/D is best at about four degrees, and a dirty leading edge lowers C L max.