Principles of Flight · Chapter 1
Overview, Units and Definitions What every aeroplane needs, the four forces and how they are linked, and the units, laws and words the rest of the course is built on.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to Principles of Flight. Before we can explain how a wing makes lift, or why an aeroplane is stable, we need a common language. In this first chapter we look at what every aeroplane needs, meet the four forces of lift, weight, thrust and drag, and see how tightly they are linked. Then we build the toolkit: mass, force, weight, work, power and energy, Newton’s three laws and momentum, the key words of the glossary, the speeds and their units, and the V-speed symbols you will meet in every flight manual. Take your time here: every later chapter leans on it.
Chapter 1 roadmap
The language of flight 1 · The aeroplane The parts every aeroplane needs, the four forces and why they are linked.
2 · Mass, force, weight Kilograms and newtons, W = m g , the centre of gravity and Newton’s laws.
3 · Work, power, energy Joules and watts, kinetic energy ½ m V² , momentum and a take-off worked example.
4 · Glossary The aerofoil words, flow words and stability words used in every later chapter.
5 · Speeds and symbols Knots and metres per second, Mach number , the speed of sound and the V-speeds.
6 · Exam focus Units, definitions and the classic traps: work without movement, mass versus weight.
Chapter 1 · Overview, Units and Definitions
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is our route through chapter one. We start with the aeroplane itself: the parts it needs and the four forces that act on it, and why those forces are tied together. Then we move to the basic physics: mass and weight, force, the centre of gravity and Newton’s three laws. Part three is about work, power and energy, ending with a real take-off example where we calculate everything with numbers. Part four is a glossary of the words that will appear in every later chapter, from aerofoil to wash-out. Finally we sort out speeds: knots versus metres per second, the speed of sound, Mach number and the V-speed symbols. These topics produce many short, easy exam marks, so learn the units and definitions exactly.
Part 1 · The aeroplane
Five things every aeroplane needs A wing to generate the lift force A fuselage to carry the payload: crew, passengers and cargo Tail surfaces to give stabilityControl surfaces to change the direction of flightEngines to drive it forward through the airShape and position vary by role, but no feature is there for style Wing: makes lift Fuselage: payload Tail: stability Controls (purple) Engines: thrust direction of flight ←
Chapter 1 · Overview, Units and Definitions
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Every aeroplane, from a trainer to a wide-body jet, needs five things. A wing, to generate the lift force. A fuselage, to carry the payload: the crew, passengers and cargo. Tail surfaces, which give the aeroplane its stability, like the feathers on an arrow. Control surfaces, the ailerons, elevator and rudder, which let the pilot change the direction of flight. And engines, to push it forward through the air. Every design arranges these same parts differently, because each aeroplane is built for a particular job. The important idea is that nothing on an aeroplane is there for style. If the wing is swept, or mounted on top, or the tailplane sits on top of the fin, there is an aerodynamic or structural reason, and later chapters explain each one.
Every feature has a purpose
Why aeroplanes look different High wing Good view down, easy loading, natural stability in roll. Common on trainers and freighters.
Low wing Room for landing gear and fuel, easy to service engines. Usually needs dihedral.
T-tail Tailplane out of the wing wake and engine efflux; brings its own stall risks.
Planform Straight, tapered, swept or delta: chosen for the speed range and role.
Chapter 1 · Overview, Units and Definitions
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Look at a line of aeroplanes at any airport and you will see the same parts arranged in very different ways. Why is one wing on top of the fuselage and another underneath? A high wing gives a good view of the ground and makes loading easy, and it is naturally stable in roll. A low wing leaves room for the landing gear and fuel, and makes engines easy to reach, but usually needs some dihedral. Why do some aeroplanes carry the tailplane on top of the fin? A T-tail keeps it clear of the wake from the wing and engines, though it brings stall problems of its own. And the plan shape of the wing, straight, tapered, swept or delta, is chosen to suit the speeds the aeroplane must fly. Design is a masterpiece of compromise: improve one thing and you usually lose something elsewhere.
The first force
Weight, and the lift that must balance it Every aeroplane has mass ; gravity acting on it gives a force, its weight Weight always acts vertically downwards , through the centre of gravity On the ground, weight is the only force we need to consider To fly, an upward force, lift , must grow until it equals the weight Lift comes from the wing moving through the air, so the aeroplane must move forward first W = m × g always vertically down L must equal W to fly centre of gravity
Chapter 1 · Overview, Units and Definitions
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us build up the forces one at a time. An aeroplane, like any body, has mass, and gravity pulls on that mass. The resulting force is the aeroplane’s weight. Weight always acts vertically downward, towards the centre of the Earth, and we draw it through a single point called the centre of gravity. Sitting on the apron, weight is the only force that matters, and the ground pushes back to hold it up. Before the aeroplane can leave the ground, something else must hold it up: an upward force called lift. Lift has to be increased until it is at least as large as the weight. But a wing only makes lift when air flows over it, so first the aeroplane has to start moving forward. That brings in the other two forces.
The four forces
Lift, weight, thrust and drag Thrust from the engines drives the aeroplane forward so the wing can make liftThe moment it moves, the air resists with drag Lift acts at 90° to the relative airflow; drag acts parallel to itWeight acts vertically down through the CGStraight, level and steady: lift = weight and thrust = drag Lift at 90° to the airflow Weight vertically down Thrust Drag parallel to the airflow
Chapter 1 · Overview, Units and Definitions
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
To make lift, the aeroplane must be driven forward, and that is the job of thrust, provided by the engines. The moment it starts to move, the air resists the motion with a force called drag. So in flight there are four main forces: lift, weight, thrust and drag. Notice their directions. Lift is defined as the part of the aerodynamic force at right angles to the relative airflow, and drag is the part parallel to it, pointing backwards. Weight always points straight down. Thrust acts along the line of the engines. In steady, straight and level flight the aeroplane is not accelerating, so the forces balance: lift equals weight and thrust equals drag. Upset that balance, by adding power for example, and the aeroplane accelerates until a new balance is reached.
Everything is connected
The forces are closely interrelated More weight needs More lift brings More drag needs More thrust means More fuel, more weight and round it goes: every gain somewhere costs something elsewhere The four forces are linked Air properties change with altitude, so the same aeroplane behaves differently high and low. Design is always a compromise .
Chapter 1 · Overview, Units and Definitions
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
The four forces are closely tied together. The greater the weight, the more lift the wing must produce. The more lift it produces, the more drag comes with it. More drag needs more thrust to balance it, and more thrust means burning more fuel, which means carrying more fuel, which means more weight. And so it goes round. This is why the design of an aeroplane is described as a masterpiece of compromise: an improvement in one area nearly always costs something in another. A bigger wing gives more lift at low speed, but adds weight and drag at cruise. One more thing to keep in mind: the properties of the air change with altitude, so the same aeroplane needs different speeds and power high up and low down. That is the subject of chapter two.
An aeroplane is not a car
It does not always point where it is going An aeroplane does not grip the air as a car grips the road The flight path is the path of the centre of gravity The relative airflow is parallel and opposite to the flight path Attitude is where the nose points relative to the horizonSlow flight: nose high, path level. The difference is set by the angle of attack flight path (path of the CG) longitudinal axis relative airflow: parallel and opposite to the flight path attitude 12° moving Nose points above the path: the aircraft is not moving where it points
Chapter 1 · Overview, Units and Definitions
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aeroplane does not grip the air the way a car’s tyres grip the road, and it is often not pointing in the direction it is moving. Think of slow flight: the nose is well above the horizon, yet the aeroplane moves level. We need three ideas to describe this. The flight path is the path traced by the centre of gravity. The relative airflow is the airflow the aeroplane meets because it is moving; it is always parallel and opposite to the flight path, so the flight path decides its direction. And the attitude is where the nose points relative to the horizon. The angle between the wing’s chord line and the relative airflow is the angle of attack, and it is this angle, not the attitude, that controls the lift. Keep these three ideas separate and many later topics become easy.
Part 2 · Mass, force and weight
Mass and inertia Mass (kilogram, kg): the quantity of matter in a body, solid, liquid or gasIt measures how hard a body is to start or to stop Inertia : the opposition a body offers to a change in motion , whether at rest or movingInertia is a quality ; we measure it by mass, a quantity More mass: more force, time or distance to accelerate, stop or turn Same force, different mass 10 kN m = 1 000 kg → a = 10 m/s² 10 kN m = 60 000 kg → a ≈ 0.17 m/s² a = F ÷ m: more mass, more inertia, less acceleration
Chapter 1 · Overview, Units and Definitions
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Mass, measured in kilograms, is the quantity of matter in a body, and that body can be a solid, a liquid or a gas, including air. A useful way to think of mass is as a measure of how difficult something is to start moving or to stop. That resistance to any change in motion is called inertia. It applies equally to a body at rest, which resists being started, and to a body already moving, which resists being stopped or turned. Inertia is a quality, and we measure it with mass, which is a quantity. The diagram shows the same ten kilonewton push applied to a one tonne light aircraft and to a sixty tonne airliner. The light aircraft accelerates at ten metres per second squared; the airliner manages less than two tenths. Heavy aeroplanes need more force, more time and more distance to speed up, slow down or change direction.
Force and acceleration
Force: a push or a pull Force (newton, N): a push or a pull; what causes, or tends to cause, a change in motion Velocity (m/s): rate of change of displacement ; speed with a directionAcceleration (m/s²): rate of change of velocity a = F ÷ m : 1 N gives 1 kg an acceleration of 1 m/s²Same mass, bigger force: more acceleration. Same force, bigger mass: less F = m × a 1 N on 1 kg a = 1 m/s² 2 N on 1 kg a = 2 m/s² 1 N on 2 kg a = 0.5 m/s² orange = force, green = resulting acceleration
Chapter 1 · Overview, Units and Definitions
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
A force is simply a push or a pull: anything that causes, or tends to cause, a change in the motion of a body. Its unit is the newton. To talk about motion we need two more words. Velocity is the rate of change of displacement, in metres per second; it is speed with a direction attached. Acceleration is the rate of change of velocity, in metres per second per second. The three are joined by one of the most useful equations in flying: acceleration equals force divided by mass. One newton acting on one kilogram produces an acceleration of one metre per second squared, and that is in fact how the newton is defined. So for the same mass, a bigger force gives a bigger acceleration, and for the same force, a bigger mass gives a smaller one. Watch out in the exam: acceleration is in metres per second squared, not metres per second.
Mass versus weight
Weight is a force: W = m × g L = 588 600 N W = 588 600 N Weight from mass Mass m = 60 000 kg quantity of matter Gravity g = 9.81 m/s² acceleration due to gravity Weight W = m × g a force, in newtons = 60 000 × 9.81 = 588 600 N lift needed in level flight A 1 kg mass weighs 9.81 N. Mass is the same on the Moon; weight is not.
Chapter 1 · Overview, Units and Definitions
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Weight is a force, so it is measured in newtons, not kilograms. It is the force on a mass due to gravity, and it equals the mass multiplied by g, the acceleration due to gravity, nine point eight one metres per second squared. So a one kilogram mass weighs nine point eight one newtons. Let us try an airliner with a mass of sixty thousand kilograms. Multiply by nine point eight one and the weight is five hundred and eighty-eight thousand six hundred newtons. In straight and level flight the wings must produce exactly that much lift. Here is the classic trap: in everyday speech we say a person weighs seventy kilograms, but strictly that is their mass. Take them to the Moon and their mass is unchanged, but their weight is about one sixth. In this course, kilograms are always mass and newtons are always force.
Centre of gravity
The point the aeroplane turns about Centre of gravity (CG) : the point through which the weight actsIn flight the aeroplane rotates about its CG , in pitch, roll and yaw The three axes all pass through the CG The CG must stay within forward and aft limits , for stability and control Fuel burn and loading move the CG, so it is checked before every flight longitudinal axis: roll normal axis: yaw lateral axis (into the page): pitch fwd limit aft limit CG must stay inside its limits
Chapter 1 · Overview, Units and Definitions
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The centre of gravity is the single point through which the whole weight of the aeroplane can be taken to act. It matters for a second reason: an aeroplane in flight rotates about its centre of gravity. Whether it rolls, pitches or yaws, the movement happens about axes that all pass through the CG. The longitudinal axis runs nose to tail, and rotation about it is roll. The lateral axis runs wingtip to wingtip, and rotation about it is pitch. The normal axis runs vertically through the CG, and rotation about it is yaw. The CG must stay within forward and aft limits, for reasons of both stability and control: too far aft and the aeroplane becomes unstable, too far forward and the elevator may not be able to raise the nose. Loading and fuel burn move the CG, so it is calculated before every flight.
The laws of motion
Newton’s three laws First law A body stays at rest , or in uniform motion in a straight line , unless an external force acts on it. To start, stop or turn something, you need a force.
Second law Acceleration is proportional to the applied force and inversely proportional to the mass : a = F ÷ m, or F = m a.
Third law Every action has an equal and opposite reaction . An engine pushes air back; the air pushes the engine forward.
Chapter 1 · Overview, Units and Definitions
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Newton’s three laws describe everything that follows in this course. The first law says a body stays at rest, or keeps moving at a steady speed in a straight line, unless an external force acts on it. So to move a stationary aeroplane, or to make a moving one change speed or direction, a force must be applied. That is inertia again. The second law says the acceleration is proportional to the applied force and inversely proportional to the mass; in symbols, force equals mass times acceleration. The third law says every action has an equal and opposite reaction. If a force accelerates a mass one way, whatever supplies the force feels the same force the other way. A jet engine throws air backwards, and the air pushes the engine forwards; a wing pushes air downwards, and the air pushes the wing up. Exam questions often mix the wording of the three laws, so learn each one exactly.
Quantity of motion
Momentum = mass × velocity Momentum (kg m/s): the quantity of motion a body possessesIt is the tendency of a body to keep moving once it has been set in motion 10 kg at 2 m/s has 20 kg m/s 2 000 kg at 55 m/s has 110 000 kg m/s At the same velocity, a larger mass has more momentum Same speed, more mass → more momentum 10 kg × 2 m/s 20 kg m/s 2 000 kg × 55 m/s 110 000 kg m/s 60 000 kg × 55 m/s 3 300 000 kg m/s log scale · momentum = mass × velocity It measures how hard the body is to stop
Chapter 1 · Overview, Units and Definitions
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Momentum is the quantity of motion a body possesses, and it is found by multiplying mass by velocity, so its unit is the kilogram metre per second. You can think of it as the tendency of a body to keep on moving once it has been set in motion. A ten kilogram mass moving at two metres per second has twenty kilogram metres per second of momentum. A two thousand kilogram aircraft at fifty-five metres per second has one hundred and ten thousand. At the same velocity a larger mass always has more momentum, which is why a heavy aircraft is so much harder to stop or to turn. The bars on the right use a logarithmic scale, otherwise the small one would be invisible. Be careful not to confuse momentum with inertia: inertia is the resistance to a change in motion, momentum is the amount of motion.
Part 3 · Work, power and energy
Work = force × distance A force does work when it moves a body in the direction of the force Work = force × distance moved along the line of actionUnit: the newton metre, called the joule (J) 10 N moving a body 2 m does 20 J of work Force but no movement : no work is done Work is done F = 10 N d = 2 m W = F × d = 10 × 2 = 20 N m = 20 J No work is done push hard d = 0, so W = 0
Chapter 1 · Overview, Units and Definitions
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
In physics, work has a precise meaning. A force does work on a body when it moves that body in the direction in which the force acts. The amount of work is the force multiplied by the distance moved along its line of action. The unit is the newton metre, which has its own name: the joule. So a ten newton force that moves a box two metres does twenty joules of work. Now the trap. If you push as hard as you can against a wall and the wall does not move, you may feel tired, but in physics no work has been done, because there was no movement. The examiner likes this one. Also notice that distance must be in the direction of the force: a force at right angles to the motion does no work at all.
The rate of doing work
Power = work ÷ time Power : the rate of doing work Power = force × distance ÷ time Unit: one joule per second is one watt (W) 10 N moving a mass 2 m in 5 s: 20 J ÷ 5 s = 4 W 500 N moving a mass 1 000 m in 2 minutes: 500 000 J ÷ 120 s ≈ 4 167 W Same work, different time 500 N over 1 000 m in 120 s P = 500 000 J ÷ 120 s = 4 167 W 500 N over 1 000 m in 60 s P = 500 000 J ÷ 60 s = 8 333 W Half the time → twice the power
Chapter 1 · Overview, Units and Definitions
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Power is simply the rate of doing work: how quickly the work gets done. You find it by dividing the work by the time taken, so power is force times distance, divided by time. One joule per second is called a watt. For example, a ten newton force that moves a mass two metres in five seconds does twenty joules of work, and twenty joules in five seconds is four watts. A bigger example from the exam: a force of five hundred newtons moves a mass one thousand metres in two minutes. The work is five hundred thousand joules. Two minutes is one hundred and twenty seconds, so the power is about four thousand one hundred and sixty-seven watts. The usual mistake is to forget to change minutes into seconds. Do the same job in half the time and you need twice the power, as the diagram shows.
Energy and kinetic energy
Kinetic energy rises with the square of speed 0 20 40 60 80 100 120 140 0 ×1 ×2 ×3 ×4 momentum ×2 kinetic energy ×4 speed (knots), same 2 000 kg mass relative to 65 kt KE = ½ m V² Momentum = m V Double the mass: momentum ×2, KE ×2 Double the speed: momentum ×2, KE ×4 Speed matters most for energy Energy is the ability to do work (joules). Kinetic energy is energy due to motion: KE = ½ m V² . 1 kg of air at 52 m/s (≈ 100 kt) has 1 352 J .
Chapter 1 · Overview, Units and Definitions
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
A body has energy if it is able to do work, and the amount of energy is measured by how much work it can do, so energy is also measured in joules. Kinetic energy is the energy a body has because it is moving: a moving mass can do work as it comes to rest. Kinetic energy equals one half times mass times velocity squared. For example, one kilogram of air moving at fifty-two metres per second, about one hundred knots, carries one thousand three hundred and fifty-two joules. Because velocity is squared, speed has a much bigger effect than mass. On the graph, momentum grows in a straight line with speed, but kinetic energy grows as a curve. Double the mass and both double. Double the speed and momentum doubles, but kinetic energy becomes four times greater. Remember this when we meet dynamic pressure in the next chapter.
Worked example
Two rejected take-offs, worked through Both aircraft have a mass of 2 000 kg . Each accelerates to its decision speed V1, has an engine failure and stops.
Quantity Aircraft 1 Aircraft 2 How Thrust, run to V1, time 4 000 N, 750 m, 30 s 8 000 N, 1 500 m, 40 s given V1 65 kt ≈ 33.4 m/s 130 kt ≈ 66.9 m/s × 0.514 Work done by thrust 3 000 000 J 12 000 000 J F × d Power 100 000 W 300 000 W work ÷ time Momentum at V1 ≈ 66 900 kg m/s ≈ 133 800 kg m/s (× 2 ) m × V Kinetic energy at V1 ≈ 1.12 MJ ≈ 4.47 MJ (× 4 ) ½ m V² To stop all KE into the brakes four times the heat brakes absorb it
Same mass, twice the speed: twice the momentum, four times the kinetic energy. Older tables round 65 kt to 33.5 m/s, giving 67 000 kg m/s and 1 122 250 J.
Chapter 1 · Overview, Units and Definitions
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put the definitions to work on two rejected take-offs. Both aircraft have a mass of two thousand kilograms. Aircraft one uses four thousand newtons of thrust over seven hundred and fifty metres, taking thirty seconds to reach sixty-five knots. Aircraft two uses eight thousand newtons over one thousand five hundred metres, taking forty seconds to reach one hundred and thirty knots. Work is force times distance: three million joules for the first, twelve million for the second. Power is work divided by time: one hundred thousand watts, and three hundred thousand watts. Now the speeds in metres per second: about thirty-three point four and sixty-six point nine. Momentum doubles, but kinetic energy is about one point one two million joules against four point four seven million: four times as much. To stop, all that energy must be turned into heat by the brakes. Notice that the kinetic energy is less than the work done: the rest went into overcoming drag and rolling friction.
Part 4 · Glossary
The aerofoil words Aerofoil : a shape that produces a reaction normal to its motion without excessive dragChord line : straight line from leading edge to trailing edgeMean camber line : halfway between the upper and lower surfacesAngle of attack (α) : between the chord line and the relative airflowStagnation point : where the flow divides and its speed relative to the surface is zerorelative airflow α leading edge trailing edge mean camber line chord line α = angle between chord line and relative airflow
Chapter 1 · Overview, Units and Definitions
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now a glossary of words you must know, starting with the aerofoil. An aerofoil is a body shaped to produce an aerodynamic reaction at right angles to its direction of motion through the air, without excessive drag. Its front is the leading edge and its back the trailing edge. The straight line joining them is the chord line. The mean camber line runs halfway between the upper and lower surfaces; the more it curves, the more camber the section has. The angle of attack, written with the Greek letter alpha, is the angle between the chord line and the relative airflow. And at the front of the section there is a stagnation point, where the airflow divides, some going over the top and some underneath, and where the speed of the air relative to the surface is zero. Watch how the streamlines crowd together over the upper surface: that is faster air.
Glossary
Words about the airflow Term Meaning Term Meaning Relative airflow Airflow due to the aircraft’s motion: parallel and opposite to the flight path Free stream Air far enough away to be undisturbed by the aircraft Boundary layer Thin layer next to a surface where viscous forces dominate Viscosity Resistance of fluid particles to flowing over each other Laminar flow Layers slide over each other with no mixing Turbulent flow Irregular fluctuations on top of the mean flow Separation Flow detaching from a surface it was following Wake Air behind the aircraft whose total pressure it has changed Vortex Air in circulating motion round a core Vortex generator Small vane making vortices to delay separation Shock wave Thin region of abrupt rise in pressure, density and temperature, with a fall in speed Fluid A liquid or gas: takes the shape of its container Pitot tube Open-ended tube facing upstream: senses total pressure Static vent Hole in a surface parallel to the flow: senses static pressure
Chapter 1 · Overview, Units and Definitions
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
These are the words used to describe the airflow. The relative airflow is the flow caused by the aircraft’s own motion, parallel and opposite to the flight path, while the free stream is air far enough away not to be disturbed by the aircraft at all. The boundary layer is the thin layer next to the skin where viscosity, the stickiness of the air, dominates. Viscosity is the resistance of fluid particles to sliding over one another; air has very little, but it matters a great deal. Laminar flow has smooth layers with no mixing; turbulent flow has irregular fluctuations on top. Separation is the flow leaving a surface it was following. A vortex is air swirling around a core, and a vortex generator is a small vane that makes vortices to energise the boundary layer and delay separation. A shock wave is a thin region where pressure, density and temperature jump up and the speed drops. A pitot tube senses total pressure, a static vent senses static pressure.
Glossary
Stability, equilibrium and damping Equilibrium : the sum of all forces is zero AND the sum of all moments is zeroStability : after a disturbance, the motion tends to decrease Instability : a disturbance tends to increase ; divergence grows continuallyDamping : reduces the amplitude of each oscillationMoment (N m) = force × lever arm; no movement involved, so not joules Stable, damped Neutral Unstable, divergent time after a disturbance →
Chapter 1 · Overview, Units and Definitions
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Equilibrium is the condition in which the sum of all the forces on a body is zero and the sum of all the moments is zero, both at once. Stability describes what happens after a disturbance. If the disturbance tends to die away, the aeroplane is stable. If it tends to grow, it is unstable, and a disturbance that keeps on increasing with time is called a divergence. Damping is what reduces the amplitude of each swing. The aircraft in the scene has been disturbed in pitch, and each oscillation is smaller than the last: it is stable and well damped. The graphs show the three possibilities: damped, neutral and divergent. One more word: a moment is a force multiplied by its lever arm, in newton metres. Because nothing moves through that distance, a moment is never measured in joules, even though the units look alike.
Glossary
Words about the aeroplane and its loads Term Meaning Term Meaning Load factor (n) Lift ÷ weight ; often called "g"Wing loading Weight ÷ wing area Geometric dihedral Angle between a semi-span and the horizontal datum Wash-out Angle of incidence decreasing towards the tip Slat Small cambered aerofoil ahead of the wing, forming a slot Fence Chordwise plate that modifies the spanwise pressure pattern Spar Main spanwise structural member Cantilever wing Attached only at the root; no external struts Fairing, fillet Added shapes that reduce drag or smooth a junction Nacelle, pod Streamlined housing for an engine Buffeting Irregular shaking caused by eddying flow Control reversal Control producing a moment opposite to that intended Zoom Using kinetic energy to gain height Gust lock Locks the controls against wind damage when parked
Chapter 1 · Overview, Units and Definitions
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
A few more words about the airframe and its loads. Load factor, written n but usually called g, is lift divided by weight; in level flight it is one. Wing loading is weight divided by wing area. Geometric dihedral is the angle between a wing semi-span and the horizontal datum, and wash-out is a reduction in the angle of incidence towards the wing tip. A slat is a small cambered aerofoil ahead of the main wing that forms a slot, and a fence is a chordwise plate that changes the spanwise pressure pattern. A spar is the main spanwise structural member, and a cantilever wing has no external struts. Fairings and fillets reduce drag; a nacelle or pod houses an engine. Buffeting is irregular shaking caused by eddying flow. Control reversal means a control producing the opposite effect to the one intended, either at high speed through twisting of the structure, or at low speed when a down-going aileron stalls its wing tip. Zoom means trading speed for height.
Part 5 · Speeds and symbols
Speeds, units and Mach number Formulas use metres per second ; aircraft speeds are in knots , nautical miles per hour 1 kt ≈ 0.514 m/s , so 100 kt ≈ 51.4 m/s; 1 m ≈ 3.28 ft True airspeed (TAS, V) : the speed of the aircraft through the airSpeed of sound (a) depends only on air temperature : about 340 m/s, 661 kt, at ISA sea levelMach number M = TAS ÷ a ; MCRIT : free-stream Mach number at which flow somewhere first reaches the local speed of soundSpeeds and units 1 knot 1 nautical mile per hour ≈ 0.514 m/s 100 kt ≈ 51.4 m/s (≈ 52 in old tables) 1 nm 1 852 m ≈ 6 076 ft (≈ 6 080) 1 m ≈ 3.28 ft Sound, ISA sea level a ≈ 340 m/s ≈ 661 kt TAS Mach number M = TAS ÷ a M 0.8 at SL ≈ 529 kt Speed of sound depends only on temperature
Chapter 1 · Overview, Units and Definitions
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Speeds come in several units. Physics formulas use metres per second, but aircraft speeds are given in knots, which are nautical miles per hour. One knot is about zero point five one four metres per second, so one hundred knots is about fifty-one point four metres per second; older tables round it to fifty-two. A nautical mile is one thousand eight hundred and fifty-two metres, about six thousand and seventy-six feet. True airspeed is the speed of the aircraft through the air, and we give it the symbol V. Sound travels as weak pressure waves, and its speed depends only on the temperature of the air: the colder the air, the slower the sound. At ISA sea level it is about three hundred and forty metres per second, or six hundred and sixty-one knots. Mach number is true airspeed divided by the local speed of sound. The critical Mach number is the free-stream Mach number at which the airflow somewhere on the aircraft first reaches the local speed of sound.
V-speeds
The V-speed symbols you will meet Symbol Meaning Symbol Meaning VS Stalling speed, or minimum steady flight speed VS0 / VS1 Stall speed in the landing / a stated configuration V1 Take-off decision speed VR Rotation speed V2 Take-off safety speed (engine failed) VMC Minimum control speed, critical engine inoperative VMD Minimum drag speed VYSE Best rate of climb, one engine inoperative VA Design manoeuvring speed; VA = VS √n VFE Maximum flap extended speed VLO / VLE Max gear operating / gear extended speed VNE Never-exceed speed VMO / MMO Maximum operating speed / Mach number VREF Reference landing speed, typically 1.3 VS
Chapter 2 explains which kind of airspeed each one is. All are given to the pilot in the flight manual as indicated airspeeds .
Chapter 1 · Overview, Units and Definitions
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Speeds that matter for safe operation get a V symbol. V S is the stalling speed, or the minimum steady flight speed; V one is the take-off decision speed, V R the rotation speed, and V two the take-off safety speed with an engine failed. V M C is the minimum control speed with the critical engine inoperative. V M D is the minimum drag speed, and V Y S E the best one-engine climb speed. V A is the design manoeuvring speed, which equals the stall speed times the square root of the limit load factor. V F E is the maximum speed with flaps extended, V L O and V L E the gear operating and gear extended limits, and V N E the never-exceed speed. V M O and M M O are the maximum operating speed and Mach number. V REF, the reference landing speed, is typically one point three times the stall speed.
Glossary
Scale: a model is not the same as the real thing full size 1/10 model Length 1/10 Area (wing area, S) 1/100 Volume and mass 1/1 000 Wing loading (W/S) 1/10 A scale model is to scale in some respects, not all
Chapter 1 · Overview, Units and Definitions
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
One more idea from the glossary that catches people out: scale. Imagine a one tenth scale model of an aeroplane. Every length is one tenth of the real thing. But areas, such as the wing area, depend on length times length, so they are one hundredth. Volumes depend on length cubed, so if the model is built from the same materials its mass is one thousandth. Divide weight by wing area and the model’s wing loading is only one tenth of the real aircraft’s. So a model is to scale in some respects but not in others. That is one reason wind tunnel results must be corrected before they apply to the full-size aeroplane, and why small models fly so slowly and gently compared with the real thing.
Symbols
The symbols used in this course Symbol Meaning Symbol Meaning L, D, W, T Lift, drag, weight, thrust CL , CD , Cm Lift, drag and pitching moment coefficients q or Q Dynamic pressure, ½ ρ V² p Static pressure S, b, c Wing area, span, chord AR, t/c Aspect ratio, thickness–chord ratio V, VS , M, a TAS, stall speed, Mach number, speed of sound n, g Load factor; acceleration due to gravity α (alpha) Angle of attack β (beta) Sideslip angle γ (gamma) Angle of climb or descent (some use θ) φ (phi) Angle of bank ρ (rho) Air density σ (sigma) Relative density, ρ ÷ ρ0 CG, CP, AC Centre of gravity, centre of pressure, aerodynamic centre μ, Δ, ∝ Mach angle; increment; proportional to
Chapter 1 · Overview, Units and Definitions
26
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the symbols we use from now on. L, D, W and T are lift, drag, weight and thrust. C L, C D and C M are the lift, drag and pitching moment coefficients. Lower case q, or capital Q, is dynamic pressure, half rho V squared, and lower case p is static pressure. S is wing area, b the span and c the chord. V is true airspeed, V S the stall speed, M the Mach number, and a the speed of sound. n is the load factor. The Greek letters: alpha for angle of attack, beta for sideslip, gamma for the angle of climb or descent, though some questions use theta, phi for bank angle, rho for density, sigma for relative density, mu for the Mach angle, and delta for a small change. C G, C P and A C are the centre of gravity, centre of pressure and aerodynamic centre. There is no single world standard, so read each question carefully.
Summary
What to take into the exam Four forces Lift ⟂ airflow, drag ∥ airflow, weight down, thrust forward. Level: L = W, T = D.
Mass and weight Mass in kg (matter); weight in N. W = m g , g = 9.81 m/s².
Newton 1st: rest or uniform motion. 2nd: a = F/m. 3rd: equal and opposite reaction.
Work and power Work = F × d (J); no movement, no work. Power = work ÷ time (W).
Energy KE = ½ m V² (J). Double speed: momentum ×2, KE ×4.
Momentum, inertia Momentum = m V (kg m/s). Inertia: opposition to change in motion.
Speeds 1 kt ≈ 0.514 m/s. a ≈ 340 m/s (661 kt) ISA SL, set by temperature only. M = TAS/a.
Glossary Equilibrium: ΣF = 0 and ΣM = 0. Stability: disturbance dies away. Load factor = L/W.
Chapter 1 · Overview, Units and Definitions
27
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us gather the key points. Four forces act in flight: lift at right angles to the airflow, drag parallel to it, weight straight down and thrust forward; in steady level flight lift equals weight and thrust equals drag. Mass is in kilograms, weight in newtons, and weight equals mass times nine point eight one. Newton’s first law is about staying at rest or in uniform motion, the second gives acceleration equals force over mass, and the third gives equal and opposite reactions. Work is force times distance, in joules, and no movement means no work; power is work divided by time, in watts. Kinetic energy is half m V squared, so doubling speed doubles momentum but quadruples kinetic energy. One knot is about zero point five one four metres per second, and the speed of sound, about six hundred and sixty-one knots at sea level, depends only on temperature. And remember: equilibrium needs both forces and moments to balance.