Principles of Flight · Chapter 15
Static Stability and the Longitudinal Case What stability means, the three kinds of static stability, the reference axes, and why a tailplane, a neutral point and a static margin decide how stable an aeroplane is in pitch.
ΔL ΔLt restoring moment CG neutral point static margin © 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to lesson fifteen, the start of our work on stability. Every aeroplane is pushed about by gusts and by the pilot's own inputs. Whether it settles back to where it was, or wanders further away, decides how safe and how tiring it is to fly. In this lesson we define static stability, set up the three reference axes, and then concentrate on pitch: why a wing on its own is unstable, how the tailplane fixes that, and how the position of the centre of gravity decides everything. You will meet the neutral point, the static margin and the two CG limits, and see why more stability always means less controllability.
Lesson 15 roadmap
Static stability, step by step 1 · The idea Equilibrium and trim. Positive, neutral and negative static stability. Static versus dynamic.
2 · The axes Longitudinal, lateral and normal axes through the CG ; roll, pitch and yaw moments.
3 · Pitch stability The aerodynamic centre , the unstable wing and the stabilising tailplane .
4 · Neutral point Where the wing and tail moments balance. The static margin and a worked example.
5 · Trim How equilibrium is set: pilot effort, tabs, trimming tailplane, fuel transfer.
6 · Control Why more stability means less controllability , and heavier stick forces.
7 · CG limits The forward limit (controllability) and the aft limit (stability).
8 · Exam traps The classic wrong answers, and how to avoid them.
Chapter 15 · Static Stability and the Longitudinal Case
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is the plan for this lesson. First, the idea of stability itself: what equilibrium and trim mean, and the three kinds of static stability, positive, neutral and negative, along with the difference between static and dynamic stability. Second, the three reference axes through the centre of gravity. Third, the heart of the lesson, stability in pitch: the aerodynamic centre, why a wing on its own is unstable, and how the tailplane rescues it. Fourth, the neutral point and the static margin, with numbers. Fifth, the ways an aeroplane is trimmed. Sixth, the trade between stability and controllability. Seventh, the forward and aft limits of the centre of gravity, and what happens if you load outside them. And finally, the exam traps. The next lesson builds on this one with graphs, stick forces and manoeuvres.
Definition
What stability means Stability : the tendency of an aircraft to return to a steady state of flight after a disturbance, without help from the pilot Disturbances: gusts , or the pilot's own control inputs An aircraft needs enough stability to hold a steady condition and recover from upsets Enough to keep the pilot's workload low But it must still respond properly to the controls : manoeuvrability matters too Two broad kinds: static and dynamic In trim forces and moments balance Gust: nose up the balance is upset Back in trim no help from the pilot gust
Chapter 15 · Static Stability and the Longitudinal Case
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Stability is the tendency of an aircraft to come back to a steady state of flight after something has disturbed it, without any help from the pilot. The disturbance might be a gust, or it might be the pilot's own control input. Watch the aeroplane: a gust pitches the nose up, and with nobody touching the controls it settles back to where it was. A good aeroplane needs enough stability to hold a steady flight condition and to recover from upsets on its own, because that keeps the pilot's workload down on a long flight. But stability is not the only goal. The aeroplane must also respond properly when the pilot does want to change something, so it can be manoeuvred as the designer intended. Keep that tension in mind; it comes back at the end of the lesson. Stability comes in two broad kinds, static and dynamic, and we start with static.
Equilibrium
Equilibrium, or trim An aircraft is in equilibrium (trim) when the sum of all forces is zero and the sum of all moments is zero Then there are no accelerations : it carries on in steady flight A gust or a control deflection upsets the balance of forces or moments The aircraft then accelerates , in a straight line or in rotation about the CG Trimmed means the moments in pitch, roll and yaw are all zeroLift Weight Tail load Thrust Drag Σ forces = 0 Σ moments = 0 Equilibrium (trim) no linear or angular acceleration
Chapter 15 · Static Stability and the Longitudinal Case
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
An aircraft is in equilibrium, which we also call trim, when two things are true at once: the sum of all the forces on it is zero, and the sum of all the moments about the centre of gravity is zero. Lift balances weight, thrust balances drag, and the small load on the tailplane balances the pitching moments of the wing and the rest of the aeroplane. With nothing left over, there are no accelerations, so the aircraft simply carries on in steady flight. Now suppose a gust strikes, or the pilot moves a control. The balance is upset, and the aircraft accelerates: either in a straight line, or in rotation about the centre of gravity. Stability is all about what those unbalanced moments do next. Notice too the strict meaning of trimmed: all the moments, in pitch, roll and yaw, are zero.
Three kinds of static stability
Positive, neutral and negative Positive static stability tends to return Neutral static stability stays where it is put Negative static stability keeps going: unstable Static stability is judged only by the initial tendency once the disturbing force is removed.
Chapter 15 · Static Stability and the Longitudinal Case
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Static stability is judged by just one thing: the initial tendency of the aircraft once the disturbing force has gone. Think of a ball. In a trough, push it to one side, let go, and it starts back towards the bottom. That is positive static stability, or simply static stability. It may roll past the bottom and back, but every displacement creates a tendency to return. On a perfectly flat surface, the ball stays wherever you put it; it finds a new equilibrium at any point. That is neutral static stability. On top of a hill, push it slightly and it runs away further in the direction you pushed it. That is negative static stability, or static instability. The dashed circle in each picture marks the original equilibrium. Notice we are not yet asking what happens over the following seconds; only which way it starts.
Static and dynamic
First tendency, then the motion Static stability : the initial tendency after a disturbance; the motion that follows is ignoredDynamic stability : the motion over time ; stable if the amplitude decreases A statically stable aircraft may overshoot and oscillate ; whether that dies away is the dynamic question Static stability does not guarantee dynamic stability But a statically unstable aircraft can never be dynamically stable Dynamic modes are covered in detail in lesson 17 Static stability the first, initial tendency after release Does it start back towards equilibrium? Dynamic stability the motion that follows, over time time oscillation dies away: dynamically stable
Chapter 15 · Static Stability and the Longitudinal Case
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The word static is used because static stability looks only at the initial tendency to return to equilibrium; the motion that follows is not considered. Dynamic stability is about that motion over time. A statically stable aeroplane, pushed nose up, will start back down, but it may overshoot, then come back again, and so oscillate. If the size of those swings dies away, as in the lower graph, the aeroplane is dynamically stable too. If the swings stay the same, or grow, it is not. So static stability does not guarantee dynamic stability. The reverse rule is a favourite exam point: if an aircraft is statically unstable, it can never be dynamically stable, because it does not even start back towards equilibrium. We will look at the dynamic modes, the phugoid and the short period oscillation, in lesson seventeen. Here we stay with static stability.
Reference axes
Three axes through the centre of gravity All three axes pass through the centre of gravity ; the aircraft rotates about the CG Longitudinal axis : nose to tail. Moment about it: rolling moment, L ; roll right is positiveLateral axis : parallel to a line through the wing tips . Moment: pitching moment, M ; nose up is positiveNormal axis : "vertical", at 90° to the longitudinal axis. Moment: yawing moment, N ; nose right is positiveA conventional right-hand axis system Lateral axis pitch · moment M +M = nose up Longitudinal axis roll · moment L Normal axis yaw · moment N +N = nose right All three axes pass through the CG side view plan view
Chapter 15 · Static Stability and the Longitudinal Case
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
To describe how an aeroplane moves, we use three reference axes, and all three pass through the centre of gravity, because a free aircraft rotates about its CG. The longitudinal axis runs through the CG from nose to tail. A moment about it is a rolling moment, given the letter L, and a roll to the right is positive. The lateral axis passes through the CG parallel to a line joining the wing tips. A moment about it is a pitching moment, M, and nose up is positive. The normal axis passes vertically through the CG, at ninety degrees to the longitudinal axis. A moment about it is a yawing moment, N, and nose right is positive. Be careful with the exam wording: the lateral axis is parallel to a line through the wing tips and passes through the CG; it is not the line through the tips themselves.
Which stability is which
Axis, motion and stability Axis Motion about it Moment Stability name Main control Lateral (wing tip to wing tip) Pitch M, + nose up Longitudinal stabilityElevator Longitudinal (nose to tail) Roll L, + right wing down Lateral stabilityAilerons Normal ("vertical") Yaw N, + nose right Directional stabilityRudder
The trap: longitudinal stability is about the lateral axis , and lateral stability is about the longitudinal axis . Longitudinal stability can be studied on its own; lateral and directional motions are coupled .
Chapter 15 · Static Stability and the Longitudinal Case
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
This table is worth learning exactly, because the names cross over. Longitudinal stability is stability in pitch, and pitch is rotation about the lateral axis. Lateral stability is stability in roll, and roll is rotation about the longitudinal axis. Directional stability is stability in yaw, about the normal axis. To avoid confusion, always ask yourself which axis the motion takes place about. Longitudinal stability is studied first, and on its own, because in general pitching does not interact with motion about the other two axes. Rolling and yawing, on the other hand, tend to interact; a roll produces a yaw and a yaw produces a roll. That coupled motion is the subject of lessons seventeen and eighteen. For the rest of this lesson and the next, we deal only with pitch.
Static longitudinal stability
Stable, neutral and unstable in pitch Judged by displacing the aircraft from its trimmed angle of attack , by a gust or a control input Positive : the pitching moments return it to the trim angle of attack. Essential : safe, easy, logical stick forcesNeutral : it stays at the new attitude. The lower limit ; over-responsive, will not hold trimNegative : it keeps pitching until the pilot stops it. Cannot be trimmed; illogical control forcesAn unstable aeroplane makes the pilot supply the stability : unacceptable Positive nose-down moment returns it Neutral no moment: stays at new attitude no moment Negative nose-up moment: diverges After a nose-up gust:
Chapter 15 · Static Stability and the Longitudinal Case
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
Static longitudinal stability is judged by disturbing the aircraft from its trimmed angle of attack, by a gust or by a control input, and seeing which way the pitching moments act. If they push it back towards the trimmed angle of attack, it has positive static longitudinal stability. That is essential: a stable aeroplane seeks and holds a trimmed condition, so it is safe and easy to fly, and the stick forces it needs make sense in direction and size. If it simply stays at whatever attitude it was disturbed to, it is neutrally stable. That is the boundary between stability and instability, the lower limit; such an aeroplane is over-responsive and will not hold trim. If it keeps pitching further in the disturbed direction until the pilot resists, it has negative stability. It cannot be trimmed, the control forces needed are illogical, and the pilot ends up supplying the stability. That is totally unacceptable.
The aerodynamic centre
A fixed point for the lift changes As the angle of attack rises, lift grows and the centre of pressure moves forward About one point, the aerodynamic centre (AC) , the pitching moment does not change with angle of attack The AC is at about 25 % chord (the quarter chord) in subsonic flow For a cambered wing the moment about the AC is negative (nose down) and constant So we treat every change in lift as acting at the AC arm d small α CL 0.55 CP at 34 % L arm d larger α CL 1.15 CP at 29 % L Bigger L × shorter d: the moment about the AC is unchanged ▲ AC at ¼ chord ● centre of pressure
Chapter 15 · Static Stability and the Longitudinal Case
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
To study stability we need a fixed point to hang the lift changes on. The centre of pressure is no good, because it moves. Watch it: as the angle of attack rises, lift grows and the centre of pressure moves forward. But there is one point, the aerodynamic centre, about which the pitching moment stays the same whatever the angle of attack. Why? Bigger lift acts through a shorter arm, because the centre of pressure has come forward, and the product, lift times arm, does not change. In subsonic flow the aerodynamic centre sits at about a quarter of the chord back from the leading edge. For a normal cambered wing, the moment about it is negative, that is nose down, and constant at normal angles of attack. So from now on, every change in wing lift is treated as acting at the aerodynamic centre.
Contribution of the wing
A wing on its own is unstable On a conventional aeroplane the wing AC is ahead of the CG An upward gust raises α and adds lift, ΔL , at the AC ΔL acting through arm x gives a nose-up moment about the CG Nose up raises α further: an unstable moment So the wing's contribution is destabilising ; the further aft the CG, the worse The camber sets the constant moment about the AC but not the stability ΔL arm x nose-up moment ΔL × x upward gust raises α Wing alone: AC ahead of CG UNSTABLE
Chapter 15 · Static Stability and the Longitudinal Case
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now for the problem. On a conventional aeroplane the wing's aerodynamic centre is in front of the centre of gravity. Suppose an upward gust momentarily increases the angle of attack. The wing produces extra lift, delta L, acting at the aerodynamic centre. Multiply it by the arm x, from the aerodynamic centre back to the centre of gravity, and you get a nose-up pitching moment about the CG. Nose up means the angle of attack rises even further, more lift, more nose-up moment. That is an unstable pitching moment, so a wing on its own is statically unstable. The further aft the centre of gravity, the longer the arm x and the stronger this destabilising effect. One more point the exam likes: the amount of positive camber changes the constant nose-down moment about the aerodynamic centre, but it has no effect on longitudinal stability, which depends on how the moment changes with angle of attack.
Contribution of the tailplane
The tailplane supplies the restoring moment ΔL (wing) ΔLt (tail) x y wing moment ΔL × x: nose up tail moment ΔLt × y: nose down Same gust, two moments about the CG ΔLt × y > ΔL × x → STABLE If the nose-down tail moment (ΔLt × y) is bigger than the nose-up wing moment (ΔL × x), the aeroplane is statically stable .
Chapter 15 · Static Stability and the Longitudinal Case
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
The tailplane is placed to produce a stabilising moment about the CG. The same gust that raises the wing's angle of attack also raises the angle of attack of the tailplane, so the tail produces extra lift too, delta L t. The tail is a long way behind the CG, at arm y, so this small extra force makes a large nose-down moment. Now there are two moments. The wing moment is delta L times x, nose up. The tail moment is delta L t times y, nose down. If the tail moment is the bigger one, the net nose-down moment gives an angular acceleration that returns the aircraft towards its trimmed attitude, as you see here. The bigger the tail moment compared with the wing moment, the faster the return, although too much is not good either. This is why the horizontal tail is the main source of longitudinal stability. The amount it gives also depends on its efficiency, which we look at next lesson.
Worked example
Adding up the two moments Gust adds 4000 N of wing lift at the AC, 0.25 m ahead of the CG Wing moment = 4000 × 0.25 = 1000 N·m nose up Tail lift rises by 300 N at 5.0 m behind the CG Tail moment = 300 × 5.0 = 1500 N·m nose down Net 500 N·m nose down : the aeroplane is stable A small tail force wins because of its long arm 4000 N 300 N 0.25 m 5.0 m Wing moment 4000 × 0.25 = 1000 N·m nose up Tail moment 300 × 5.0 = 1500 N·m nose down Net 1500 − 1000 = 500 N·m nose down Worked example: a gust hits not to scale nose-down result: statically stable
Chapter 15 · Static Stability and the Longitudinal Case
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put numbers on it. A gust adds four thousand newtons of lift at the wing's aerodynamic centre, which is a quarter of a metre ahead of the centre of gravity. The wing moment is four thousand times nought point two five, which is one thousand newton metres, nose up. The same gust adds only three hundred newtons of lift at the tailplane, but the tail is five metres behind the CG. The tail moment is three hundred times five, fifteen hundred newton metres, nose down. Subtract: the net moment is five hundred newton metres, nose down. So the aeroplane pitches back towards its trimmed angle of attack; it is statically stable. The key point is that the tail force is more than ten times smaller than the wing force, yet it wins, purely because of its long arm. That long arm is why tailplanes are mounted so far aft.
Effect of CG position
Moving the CG changes both arms Both arms depend on the CG position CG forward : wing arm x shorter , tail arm y longer So the stabilising tail moment grows and the destabilising wing moment shrinks: more stable CG aft : x longer, y shorter: less stable For a given gust and TAS, the wing moment is set by the CG ; the tail moment by the CG and the tail's effectiveness CG forward short x, long y → more stable ΔL ΔLt x y CG aft long x, short y → less stable ΔL ΔLt x y
Chapter 15 · Static Stability and the Longitudinal Case
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Both arms depend on where the centre of gravity is. Move the CG forward, and the wing arm x gets shorter while the tail arm y gets longer. The destabilising wing moment shrinks and the stabilising tail moment grows, so the aeroplane becomes more stable. Move the CG aft, and the opposite happens: x grows, y shrinks, and stability falls. That is the single most important rule of longitudinal stability: a forward CG increases static longitudinal stability, an aft CG reduces it. There is a subtle difference between the two moments, though. For a given gust and true airspeed, the wing moment is fixed essentially by the CG position alone. The tail moment depends on the CG position and also on how effective the tailplane is, which in turn depends on the downwash from the wing, the dynamic pressure at the tail, and the difference in incidence between wing and tail. More on those in lesson sixteen.
The neutral point
Where the wing and tail moments balance Move the CG aft: tail moment falls , wing moment rises At one CG position the two changes are equal : a gust leaves no net moment The aircraft stays in its new position: neutral static stability That CG position is the neutral point (NP) Think of it as the aerodynamic centre of the whole aeroplane CG ahead of the NP: stable. CG behind it: unstable ΔL ΔLt x y CG on the neutral point ΔL × x = ΔLt × y no net moment after a gust NEUTRAL STABILITY Move the CG aft until the moments match CG moving aft
Chapter 15 · Static Stability and the Longitudinal Case
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Start with the CG in a stable position and move it aft. The tail arm shortens and the wing arm lengthens, so the nose-down tail moment produced by a gust gets smaller and the nose-up wing moment gets bigger. Eventually the CG reaches a position where the two changes are exactly equal. Now if a gust pitches the nose up, the moments add to zero, there is no angular acceleration to bring the aeroplane back, and it simply stays at its new attitude. That is neutral static longitudinal stability, and the CG position where it happens is called the neutral point. A useful way to picture it: the neutral point is the aerodynamic centre of the whole aeroplane, the point where all changes of total lift effectively act. With the CG ahead of the neutral point the aeroplane is stable; with the CG behind it, unstable.
Worked example
Finding the neutral point 4000 N 300 N CG NP 0.25 m 0.116 m x = 0.366 m to the NP x + y = 5.25 m between the two ACs not to scale At the neutral point the moments are equal 4000 · x = 300 · (5.25 − x) 4300 · x = 1575 x = 0.366 m CG is at 0.25 m, so it may move 0.116 m aft before neutral ÷ MAC 1.5 m = static margin 7.7 %
Chapter 15 · Static Stability and the Longitudinal Case
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us find the neutral point from the numbers we used earlier. The wing lift increment is four thousand newtons, the tail lift increment three hundred newtons, and the two aerodynamic centres are five point two five metres apart, so x plus y always equals five point two five. At the neutral point the moments are equal: four thousand times x equals three hundred times, five point two five minus x. Gather the x terms: four thousand three hundred x equals one thousand five hundred and seventy-five, so x is nought point three six six metres. Our CG was at nought point two five metres behind the wing aerodynamic centre, so it can move only about nought point one one six metres further aft, roughly twelve centimetres, before the aeroplane becomes neutrally stable. On a mean aerodynamic chord of one point five metres, that distance is seven point seven per cent. That distance has a name, the static margin.
The static margin
How far the CG is ahead of the neutral point Static margin = distance of the CG ahead of the neutral point , usually in % MACIt is a measure of static longitudinal stability: bigger margin, more stable The CG is never allowed to reach the NP: far too sensitive to the controls The aft CG limit is set some distance ahead of the NP Aft limit to NP = the minimum static margin required Example: CG 28 %, NP 40 % MAC → margin 12 % 0 % 10 % 20 % 30 % 40 % 50 % 60 % position as per cent of MAC, from its leading edge fwd limit AC CG aft limit NP static margin 12 % minimum 7 % Static margin = NP − CG Example figures
Chapter 15 · Static Stability and the Longitudinal Case
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
The distance the CG lies ahead of the neutral point is called the static margin, and it is the measure of static longitudinal stability. The bigger the static margin, the more stable the aeroplane. It is normally given as a percentage of the mean aerodynamic chord. In this example the neutral point is at forty per cent of the chord and the CG at twenty-eight per cent, so the static margin is twelve per cent. In practice the CG is never allowed anywhere near the neutral point, because the aeroplane would be far too sensitive to its controls. A certain amount of stability is always required, so the aft CG limit is placed some distance ahead of the neutral point, here at thirty-three per cent. The gap between the aft limit and the neutral point, seven per cent, is the minimum static margin the aeroplane is allowed to have. Exam wording: static margin is CG to neutral point, not CG to aerodynamic centre.
Trim
Ways to establish trim Trim tab tab down holds the elevator up: stick force zero tab elevator up pivot Trimming tailplane the whole stabiliser changes incidence fuel moves aft Trim tank moving fuel moves the CG itself Pilot effort Holding a stick force on the controls. Tiring over any length of time.
Trim tabs A small tab on the elevator holds it deflected, so the stick force falls to zero .
Trimming tailplane A variable incidence horizontal stabiliser changes the tail load directly; used on jets.
Fuel transfer Pumping fuel between the wing tanks and an aft trim tank moves the CG itself.
Actuator bias With powered flying controls , biasing the surface actuator's neutral position.
Controllability The ability to respond to control deflection and reach the desired flight condition.
Chapter 15 · Static Stability and the Longitudinal Case
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
Being trimmed means the moments in pitch, roll and yaw are all zero. As speed, weight, CG and configuration change, the trimmed condition changes, and there are several ways to re-establish it. The simplest is pilot effort, just holding a force on the controls, which is tiring. A trim tab on the elevator holds the elevator deflected for you, so the stick force falls to zero. Large jets use a variable incidence trimming tailplane, where the whole horizontal stabiliser changes its angle, altering the tail load directly. Some aircraft pump fuel between the wing tanks and a trim tank in the tail, which moves the centre of gravity itself. And with powered flying controls, the neutral position of the surface actuator can be biased. Linked to trim is controllability: the ability of the aircraft to respond to control deflection and achieve the flight condition the pilot wants, from take-off to landing.
Stability versus controllability
More stability, less controllability CG forward very stable: big force CG mid stable: moderate force CG on NP neutral: no force CG behind NP unstable: push back The rust arrow is the stick force needed to hold a displacement. Forward CG: high force, least controllable. Aft CG: light force, most controllable.
Chapter 15 · Static Stability and the Longitudinal Case
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Stability and controllability pull in opposite directions. Back to the ball. In a trough, if you want to hold the ball away from the bottom, you must push it in the direction of the displacement, against its wish to return. That push is the pilot's stick force. Make the trough steeper, which is what moving the CG forward does, and you need a much bigger force for the same displacement: high stability, low controllability. A shallower trough needs less force. On a flat surface, with the CG on the neutral point, no force is needed at all; controllability becomes almost unlimited, and the only resistance is aerodynamic damping while the aircraft is moving. Control inputs may then give exaggerated responses. On the hill, with the CG behind the neutral point, the force must be applied against the displacement: having pulled the nose up, the pilot must push to stop it pitching further. The pilot is supplying the stability, which is unacceptable.
CG limits
The forward and aft CG limits Forward CG : stability greatest , controllability least , stick force high Aft CG : stability least , controllability greatest , stick force low The aft limit is set by the minimum permissible stability (minimum static margin) The forward limit is set by the minimum permissible controllability , in the worst case Worst cases for control: rotation at take-off , the landing flare and reaching CL max in manoeuvres NP Forward limit least controllable high stick force Aft limit least stable low stick force The CG must stay between two limits
Chapter 15 · Static Stability and the Longitudinal Case
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pulling this together gives the two CG limits. With the CG on the forward limit, static longitudinal stability is greatest, controllability is least, and stick forces are high. With the CG on the aft limit, stability is least, controllability is greatest, and stick forces are low. The aft limit is set to guarantee a minimum degree of static longitudinal stability, that is a minimum static margin ahead of the neutral point. The forward limit is set to guarantee a minimum degree of controllability under the worst circumstances. The worst cases are those where the elevator must produce a lot of nose-up moment against a very stable aeroplane: rotating to the take-off attitude, flaring for landing with flaps down and the power at idle, and reaching the maximum lift coefficient in a manoeuvre. Learn the pair of sentences: forward limit, controllability; aft limit, stability.
Loading outside the limits
What goes wrong outside the CG limits CG ahead of the forward limit CG behind the aft limit Stability Very high Too low : neutral or even unstable Stick forces Very heavy to pitchVery light : easy to overstress the aircraftControl May not rotate at VR or flare ; may not reach CL max Over-sensitive; tendency to pitch up at slow speed ; stall and spin recovery may be difficult Tail load Larger download : more wing lift needed Smaller download Performance Higher stall speed , more drag and fuel burnWithin limits: slightly lower stall speed, faster cruise
Within the limits an aft CG gives a little better performance; outside them, either direction is dangerous.
Chapter 15 · Static Stability and the Longitudinal Case
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
What if the aircraft is loaded outside the limits? Ahead of the forward limit, the aeroplane is very stable, and the stick forces to pitch it become very heavy. The elevator may run out of authority, so the pilot may be unable to rotate at the rotation speed or to flare for landing, or to reach the maximum lift coefficient. The tail must also carry a larger download to balance the nose-heavy moment, so the wing must make more lift: the stall speed goes up, and drag and fuel burn increase. Behind the aft limit, the opposite. Stability is too low, perhaps neutral or unstable. Stick forces become very light, so the aircraft is easily overstressed, and it tends to pitch up at slow speed; recovery from a stall or spin may be difficult. Within the limits, an aft CG does have small benefits: a smaller tail download, slightly lower stall speed and a slightly faster cruise for the same power.
CG in flight
The CG moves during a flight Fuel burn moves the CG; how depends on where the tanks arePassengers and crew moving, cargo, landing gear and flap all shift it In trim-tank aircraft, fuel transfer moves it deliberately So the CG must be inside the limits for take-off , landing and every point between Within limits at take-off does not prove it will be within limits at landing: check it , allowing for fuel used fwd limit 14 % aft limit 32 % Zero fuel 23.0 % MAC Take-off 28.5 % MAC Landing 26.0 % MAC fuel burn 10 15 20 25 30 35 40 45 CG position, % MAC Check every phase, not just take-off Illustrative figures: each type has its own loading data
Chapter 15 · Static Stability and the Longitudinal Case
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
The CG is not fixed during a flight. As fuel is burned, the CG moves, forward or aft depending on where the tanks are compared with the CG. Passengers and crew moving about the cabin, cargo, and even retracting the landing gear or moving the flaps shift it too. Aircraft with a trim tank move it deliberately by transferring fuel. That means the loading has to be checked for every phase of the flight, not just take-off. In this illustrative example, the zero fuel CG is at twenty-three per cent, the take-off CG at twenty-eight and a half per cent, and the landing CG, after the fuel has been burned, at twenty-six per cent. All are inside the limits. A classic exam question says the CG is within limits for take-off: the correct answer is that the landing CG must still be checked, allowing for the fuel consumed. It is not automatically within limits, and the crew cannot simply adjust it in flight.
Exam traps
Where marks are lost Axes and names Longitudinal stability is about the lateral axis . The lateral axis passes through the CG , parallel to the line through the wing tips.
"Inherently stable" Means a built-in tendency to return after the disturbing force is removed; not "easy to control" or "won't spin".
Static margin Distance from the CG to the neutral point , not to the AC or to the datum.
Stability source The horizontal tailplane gives longitudinal stability. Dihedral is lateral; the fin is directional.
Wing AC ahead of CG Lift changes give a moment that increases the change of lift: destabilising.
Limits Forward limit: controllability . Aft limit: stability . CG must be ahead of the NP .
Chapter 15 · Static Stability and the Longitudinal Case
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are the places where marks are usually lost. First, the axis names: longitudinal stability is about the lateral axis, and the lateral axis passes through the CG parallel to a line through the wing tips, not through the tips or the centre of pressure. Second, inherently stable means a built-in tendency to return to the original state once the disturbing force is removed; it does not mean easy to control, hard to stall or spin-proof. Third, the static margin runs from the CG to the neutral point. Fourth, the horizontal tailplane gives longitudinal stability; dihedral is about lateral stability and the fin about directional stability. Fifth, with the wing aerodynamic centre ahead of the CG, a change of lift gives a moment that increases that change: destabilising. And sixth, the forward limit protects controllability, the aft limit protects stability, and the CG must always be ahead of the neutral point.
Summary
What to take into the exam Stability Tendency to return to steady flight after a disturbance, without the pilot. Static = initial tendency.
Three kinds Positive returns, neutral stays, negative diverges. Statically unstable can't be dynamically stable.
Axes All through the CG. Pitch about the lateral axis = longitudinal stability.
The AC ¼ chord, subsonic. Moment about it constant and nose down. Lift changes act there.
Wing and tail Wing (AC ahead of CG) destabilises. Tail moment ΔLt × y must beat ΔL × x.
Neutral point CG where the moments balance: neutral stability. The whole aeroplane's AC.
Static margin CG ahead of NP. Bigger margin = more stable, heavier stick forces.
CG limits Fwd limit: minimum controllability. Aft limit: minimum stability. Check landing CG too.
Chapter 15 · Static Stability and the Longitudinal Case
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
To sum up. Stability is the tendency of an aircraft to return to a steady state of flight after a disturbance, without help from the pilot, and static stability is about the initial tendency only. Positive static stability returns, neutral stays and negative diverges, and a statically unstable aircraft can never be dynamically stable. All three axes pass through the CG, and pitch about the lateral axis is longitudinal stability. Lift changes act at the aerodynamic centre, at a quarter chord in subsonic flow, where the moment is constant and nose down. The wing, with its aerodynamic centre ahead of the CG, is destabilising; the tail moment must beat the wing moment. The neutral point is the CG position where they balance, the aerodynamic centre of the whole aeroplane. The static margin is how far the CG is ahead of it. The forward limit protects controllability, the aft limit stability.