Principles of Flight · Chapter 21
Straight Flight, Climb and Descent The balance of forces and moments in level flight, why the tailplane pushes down, and what really sets the angle and rate of a climb, a descent and a glide.
© 2026 eatpl.in. For the personal study of eatpl.in students only. Do not copy or distribute.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Welcome to flight mechanics. In this lesson we take the four forces you already know, lift, weight, thrust and drag, and see exactly how they balance in straight and level flight, in a climb, in a powered descent and in a glide. Along the way you will learn why the tailplane usually pushes down, why lift is actually less than weight in a climb, what decides your best angle and best rate of climb, and why a heavy aeroplane glides just as far as a light one. Every idea comes with real numbers, because the exam loves to test them.
Roadmap
Four flight conditions, one rule: balance Level flight Climb Descent Glide Level flight L = W, T = D, moments zero. The tailplane trims out the pitching couples.
Climb L = W cos γ, T = D + W sin γ. Angle from excess thrust , rate from excess power .
Descent Weight helps thrust. L < W and T < D. Emergency descent technique.
Glide No thrust. Angle depends only on L/D ; weight changes the speed, not the distance.
Chapter 21 · Straight Flight, Climb and Descent
2
e-books by eatpl.in · © 2026 · Do not copy or distribute
This lesson has four parts, and one rule ties them together: in steady flight every force and every moment must balance. First we look at straight and level flight, the four forces, the pitching couples they make, and the job the tailplane does to cancel those couples. Then we tilt the flight path upward into a climb and resolve weight into two parts, which tells us why lift is less than weight and what decides the best angle and the best rate of climb. Next comes the powered descent, including the emergency descent after a pressurisation failure. Finally the glide, with no thrust at all, where the glide angle depends only on the lift to drag ratio. Keep an eye out for the worked numbers on each slide; the exam asks for them.
Level flight
Equilibrium: four forces in balance Steady (unaccelerated) flight means equilibrium : up = down, forward = back, and sum of moments = 0 Weight acts through the CG , vertically down towards the centre of the EarthLift acts through the centre of pressure , at 90° to the flight pathThrust forward and drag backward, both taken as parallel to the flight pathTrimmed with L = W and throttles set so T = D Typical L/D is 10 to 20 : 1 , so the thrust needed is only 1/10 to 1/20 of the weight Lift through the CP, ⟂ to the path Weight through the CG, vertical Thrust Drag flight path L = W and T = D and Σ moments = 0
Chapter 21 · Straight Flight, Climb and Descent
3
e-books by eatpl.in · © 2026 · Do not copy or distribute
Straight and level flight at a steady speed is a state of equilibrium. That means three things. The forces acting upward exactly balance those acting downward, the forces acting forward exactly balance those acting backward, and the moments about the centre of gravity add up to zero, so nothing is trying to pitch the aircraft. Four forces are involved. Weight acts through the centre of gravity, straight down towards the centre of the Earth. Lift acts through the centre of pressure, at ninety degrees to the flight path. For this chapter we take thrust as acting forward and drag backward, both parallel to the flight path. The pilot trims for lift equal to weight and sets the throttles for thrust equal to drag. Because lift to drag ratios are typically ten to twenty to one, the thrust needed is only a tenth to a twentieth of the weight.
Level flight
The centre of pressure and the CG rarely coincide The CP moves forward as the angle of attack increases The CG moves as fuel is burned and load shifts Low speed, high α: CP ahead of the CG → nose-up lift/weight couple High speed, low α: CP behind the CG → nose-down couple Thrust and drag lines lie close together: their couple is small and usually ignored Low speed, high α: CP forward of CG CP CG nose-up couple High speed, low α: CP behind CG CP CG nose-down couple
Chapter 21 · Straight Flight, Climb and Descent
4
e-books by eatpl.in · © 2026 · Do not copy or distribute
Lift and weight act through two different points, and those points are not usually in the same place. The centre of pressure moves forward as the angle of attack increases, and the centre of gravity moves as fuel is burned and as passengers and cargo shift. In general, at low speed and a high angle of attack, the centre of pressure lies ahead of the centre of gravity. Lift up in front and weight down behind make a couple that pitches the nose up. At high speed and a low angle of attack the centre of pressure lies behind the centre of gravity, and the couple pitches the nose down. Thrust and drag also form a couple, but on most aircraft their lines of action are close together, so the moment is small and we can neglect it for now. Something must still cancel the lift weight couple, and that is the tailplane.
Pitching moments
The couples, and the tail load that balances them L W T D tail load a b (tail arm) Lift / weight couple CP behind CG → nose-down Thrust / drag couple low thrust line → nose-up (small) Tail load balances what is left over Cruise, CP aft tail pushes DOWN: L = W + P For balance the moments about the CG must cancel; with the CP aft in the cruise the tailplane pushes down .
Chapter 21 · Straight Flight, Climb and Descent
5
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here are all the pitching moments together. Lift acts a short distance a behind the centre of gravity, so lift and weight form a nose-down couple. Thrust and drag form a second couple; if the thrust line is below the drag line, it pitches the nose up, but it is usually small. Whatever moment is left over must be cancelled by the tailplane, acting at the end of a long arm, b, behind the centre of gravity. Because the arm is long, a small tail load gives a big moment. In the normal cruise the centre of pressure is behind the centre of gravity, so the tailplane must produce a down-load. This also explains a classic exam question: why a light aircraft pitches nose-down when power is reduced. The centre of gravity is forward of the centre of pressure, and when the power comes off, the balancing effects of thrust and of slipstream over the tail are lost.
The tailplane
Tail down-load: the wing lifts more than the weight The tailplane supplies the force that cancels pitching moments from CP and CG movement Cruise, CP behind CG: the tail gives a down-load With a down-load: L − P = W , so the wing must lift more than the weight With an up-load: L + P = W A tail down-load costs extra lift, so extra induced drag L = W + P W P (down) L–W couple nose-down tail moment nose-up Down-load: L − P = W → L = W + P Up-load: L + P = W
Chapter 21 · Straight Flight, Climb and Descent
6
e-books by eatpl.in · © 2026 · Do not copy or distribute
The tailplane is there to keep the aircraft in pitch equilibrium. It supplies whatever force is needed to cancel the pitching moments that come from the movement of the centre of pressure and the centre of gravity. In the normal cruise the centre of pressure is behind the centre of gravity, so the lift weight couple is nose-down, and the tailplane must push down to give a nose-up moment. Now look at the vertical forces. The wing has to hold up the weight and also the tail down-load, so lift minus the tail load equals weight; in other words, the wing lifts more than the weight. If the tail gives an up-load instead, lift plus the tail load equals weight. A down-load is not free: the extra wing lift means extra induced drag, which is one reason designers like the CG as far aft as stability allows.
Worked example
How big is the tail load? Weight 600 kN ; lift acts 0.4 m behind the CG Tail load acts 16 m behind the CG; thrust/drag couple ignored Moments: L × 0.4 = P × 16, and L = W + P Tail load P ≈ 15.4 kN down Wing lift ≈ 615 kN , about 2.6% more than the weight L W = 600 kN P CG a = 0.4 m b = 16 m Moments about the CG: L × a = P × b Vertical forces: L = W + P (W + P) × 0.4 = P × 16 P = 240 ÷ 15.6 ≈ 15.4 kN down L = 600 + 15.4 ≈ 615 kN (2.6% more than W)
Chapter 21 · Straight Flight, Climb and Descent
7
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us put numbers on it. An aircraft weighs six hundred kilonewtons. In the cruise its lift acts point four of a metre behind the centre of gravity, and the tailplane load acts sixteen metres behind it. We ignore the thrust drag couple. Take moments about the centre of gravity: lift times point four must equal the tail load times sixteen. And for the vertical forces, lift equals weight plus the tail down-load. Put the second into the first and you get weight plus P, times point four, equals sixteen P. So P equals two hundred and forty divided by fifteen point six, about fifteen point four kilonewtons downward. The wing must therefore produce about six hundred and fifteen kilonewtons, roughly two point six per cent more than the weight. Notice how small the tail load is, thanks to the long tail arm.
Lift and speed
Constant lift: slower means a higher angle of attack Level flight at constant weight needs constant lift Lift ∝ V² but only ∝ α (below the stall) Halve the dynamic pressure → double the angle of attack α ∝ 1/V²: 15° at VS, 7.5° at 1.41 VS, 3.75° at 2 VS The stalling angle sets the minimum speed, VS IAS (kt) → angle of attack α 100 150 200 250 0° 5° 10° 15° stalling angle 15° VS 141 kt → 7.5° 200 kt → 3.8° Constant lift: α ∝ 1 / V² (α measured from zero lift)
Chapter 21 · Straight Flight, Climb and Descent
8
e-books by eatpl.in · © 2026 · Do not copy or distribute
In level flight at a constant weight the wing must make the same lift whatever the speed. Lift depends on the square of the speed but only directly on the angle of attack, at least below the stall. So if you fly slower, the angle of attack must rise to make up for the lost dynamic pressure. Watch the section: at high speed only a small angle is needed. As you fly slower, the angle increases, and nearer the stall it is large. Measured from the zero lift angle, the angle of attack goes as one over V squared. If the stalling angle of fifteen degrees is reached at a hundred knots, then at a hundred and forty-one knots, which halves the needed lift coefficient, you need seven and a half degrees, and at two hundred knots only three point seven five. The stalling angle therefore fixes the minimum speed for level flight.
Speed control
Thrust equals drag, and excess thrust accelerates IAS → thrust and drag T1 T2 A B C excess thrust AC VMD VMAX (level) drag At A: T1 = D, steady speed Open the throttle to T2: T exceeds D by AC, so the aircraft accelerates until drag = T2 at B T2 = full throttle: B is the maximum level speed Above VMD, more speed needs more thrust. The full-throttle thrust line meets the drag curve at the maximum level speed .
Chapter 21 · Straight Flight, Climb and Descent
9
e-books by eatpl.in · © 2026 · Do not copy or distribute
For level flight at a constant speed, thrust must equal drag. Above the minimum drag speed, V M D, drag rises with speed, so a higher speed needs more thrust. At point A, thrust T one exactly balances the drag and the aircraft is steady. Now open the throttle to T two while still at A. Thrust now exceeds drag by the amount A C, and that excess thrust accelerates the aircraft. As it speeds up, drag rises, until at point B drag again equals thrust and the speed settles. If T two is the thrust with the throttles fully open, then the speed at B is the maximum speed achievable in level flight. Remember the word excess: whatever thrust is left over after drag is paid for can either accelerate the aircraft, as here, or, as we will see next, make it climb.
The climb
Forces in a straight steady climb Flight path inclined at the climb angle γ Lift ⟂ path; thrust and drag along it; weight vertical Weight splits into W cos γ (opposing lift) and W sin γ (backward, with drag) L = W cos γ : lift is less than weight in a climbT = D + W sin γ : thrust is more than drag In a vertical climb no lift is needed; thrust carries all the weight γ W L = W cos γ W cos γ T = D + W sin γ D W sin γ (backward) angle exaggerated for clarity
Chapter 21 · Straight Flight, Climb and Descent
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Now tilt the flight path upward into a straight steady climb at an angle we call gamma. Lift still acts at ninety degrees to the flight path, and thrust and drag act along it, but weight still acts vertically. So we split weight into two components. W cos gamma acts at right angles to the path and is balanced by lift. W sin gamma acts backward along the path, in the same direction as drag. For equilibrium, lift equals W cos gamma, so in a climb lift is less than weight. And thrust must equal drag plus W sin gamma, so in a climb thrust is more than drag. The steeper the climb, the less lift is needed and the more of the weight the engines must carry. In the limit, a vertical climb needs no lift at all.
The climb
Climb angle depends on excess thrust and weight From T = D + W sin γ: sin γ = (T − D) / W The excess thrust (T − D) sets the climb angle For a given thrust, less drag (flaps up, clean) → steeper climb More weight → smaller angleClimb gradient (%) ≈ 100 × sin γ W W cos γ = L W sin γ = T − D γ sin γ = (T − D) / W
Chapter 21 · Straight Flight, Climb and Descent
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Rearranging the thrust equation gives the most useful formula in this chapter: sine gamma equals thrust minus drag, divided by weight. Thrust minus drag is the excess thrust, the thrust left over after drag has been paid for, and it is excess thrust per unit of weight that decides the climb angle. Look at the force triangle. Weight is the long side. One side is W cos gamma, matched by lift. The other side is W sin gamma, matched by the excess thrust. So anything that cuts drag for the same thrust steepens the climb; that is why the climb gradient is better with the flaps up. Anything that adds weight makes it shallower. A handy approximation is that the climb gradient, as a percentage, is a hundred times sine gamma. The exam answer to what decides the angle of climb is always the amount by which thrust exceeds drag.
Worked example
Angle, gradient, lift and rate of climb Weight W 500 kN Thrust T (both engines) 90 kN Drag D 35 kN Excess thrust T − D 55 kN sin γ = 55 ÷ 500 = 0.11 γ ≈ 6.3° · gradient ≈ 11% L = W cos γ = 500 × 0.994 ≈ 497 kN Rate of climb = TAS × sin γ = 160 kt × 0.11 ≈ 17.6 kt ≈ 1 780 ft/min Lose one engine: T − D = 45 − 35 = 10 kN → sin γ = 0.02 (2%) Halving the thrust cut the excess thrust from 55 to 10 kN: more than 80% . That is why an engine failure hurts the climb so badly.
Chapter 21 · Straight Flight, Climb and Descent
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here is a full worked example. A twin jet weighs five hundred kilonewtons. Its engines give ninety kilonewtons of thrust and the drag is thirty-five, so the excess thrust is fifty-five. Sine gamma is fifty-five over five hundred, which is nought point one one. The climb angle is about six point three degrees, a gradient of about eleven per cent. Lift is W cos gamma, five hundred times nought point nine nine four, about four hundred and ninety-seven kilonewtons, just under the weight. If the true airspeed is a hundred and sixty knots, the rate of climb is the speed times sine gamma, about seventeen point six knots of vertical speed, close to one thousand seven hundred and eighty feet per minute. Now lose one engine. Thrust halves to forty-five, but drag is still thirty-five, so the excess is just ten. The gradient falls to two per cent.
Best angle
VX: the speed of greatest excess thrust Jet: thrust nearly constant IAS → drag thrust VX VMD max T − D Propeller: thrust falls with speed IAS → drag thrust VX VMD max T − D Jet: VX is close to VMD . Propeller: thrust falls as speed rises, so VX is below VMD . Use VX to clear obstacles.
Chapter 21 · Straight Flight, Climb and Descent
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
Both thrust and drag change with speed, so the excess thrust is greatest at one particular speed. That speed gives the maximum angle of climb, and we call it V X. On the left is a jet. Its thrust is fairly constant with speed, so the biggest gap between thrust and drag is where drag is smallest, at the minimum drag speed. For a jet, V X is close to V M D. On the right is a propeller aircraft. Its thrust is high at low speed and falls away as the speed rises, so the biggest gap moves to the left, below the minimum drag speed. V X is the speed for clearing an obstacle after take-off, because it gives the most height for the distance travelled. For best obstacle clearance the exam answer is flaps retracted and V X, because flap adds drag and reduces the excess thrust.
Best rate
VY: the speed of greatest excess power TAS → power power required (D × V) power available max excess power VY VX VMP Rate of climb = (Pa − Pr) / W Angle ↔ excess thrust Rate ↔ excess power VY is always faster than VX Rate of climb = TAS × sin γ = TAS × (T − D)/W = (power available − power required)/W.
Chapter 21 · Straight Flight, Climb and Descent
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Rate of climb is a different question: how many feet per minute, not how many feet per mile. Rate of climb is the true airspeed times sine gamma, which is speed times excess thrust divided by weight. Thrust times speed is power, and drag times speed is the power required, so rate of climb is excess power divided by weight. The speed for the best rate of climb, V Y, is where the gap between power available and power required is greatest. Because rate is angle times speed, and at V X the excess thrust is already at its peak, a little more speed still adds rate, so V Y is always faster than V X. V Y gets you to height in the shortest time, and it keeps a bigger margin above the stall, so it is the normal climb speed. Use V X only when you need the steepest path.
What changes the climb
Weight, altitude, temperature and flaps Change Why Climb angle Rate of climb Higher weight More lift → more induced drag; more W sin γ to carry Decreases Decreases Higher altitude Thrust and power available fall with density; drag at a given IAS unchanged Decreases Decreases Higher temperature Lower density: less thrust (high density altitude) Decreases Decreases Flaps extended More drag for the same thrust; lower L/D Decreases Decreases Headwind Ground speed lower for the same air path Steeper over the ground No change Tailwind Ground speed higher Shallower over the ground No change
Drag at a given IAS does not depend on altitude or temperature; what falls is the thrust . High density altitude always reduces climb performance.
Chapter 21 · Straight Flight, Climb and Descent
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
What makes the climb worse? First, weight. A heavier aircraft needs more lift, which brings more induced drag, and it has a bigger backward weight component to carry, so both the angle and the rate of climb fall. Second, altitude and temperature. Here is a subtle point: the drag at a given indicated airspeed does not depend on altitude or temperature. What changes is the engine. Thrust and power available fall as the air gets thinner, so the excess shrinks. High density altitude, meaning high, hot airfields, always reduces climb performance. Third, flaps. Flap adds more drag than it helps, so it reduces the excess thrust and the climb angle. Finally, wind. Wind does not change what happens in the air mass, so the rate of climb is unchanged. But it does change the angle over the ground, steeper into wind and shallower downwind.
Wind and the climb
Wind changes the angle over the ground, not the rate Rate of climb depends on excess power : wind has no effect Ground speed changes, so the path over the ground changes Headwind : lower ground speed → steeper climb over the groundTailwind : shallower climb, obstacles get closerTake off and climb into wind for the best obstacle clearance into wind still air downwind Same airspeed, same rate of climb Each path gains the same height in the same time Rate of climb: unchanged by wind Angle over the ground: steeper into wind
Chapter 21 · Straight Flight, Climb and Descent
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Wind is a favourite exam trap. The aircraft climbs relative to the air it is flying in, so its rate of climb, set by excess power, is the same whatever the wind. What changes is the ground speed. Climbing into a headwind, the aircraft covers less ground while gaining the same height in the same time, so its path over the ground is steeper. Downwind the opposite happens: the same rate of climb is spread over more ground, so the angle over the ground is shallower, and an obstacle ahead becomes harder to clear. So if you turn downwind after take-off, you climb at the same rate as before, but at a flatter angle over the ground, which is why the exam answer is a steeper angle into wind than downwind. It is also one reason we take off into wind.
Power-on descent
Forces in a steady powered descent Weight splits into W cos γ (balanced by lift) and W sin γ , now acting forward W sin γ adds to thrust: D = T + W sin γ So in a descent L < W and T < D Lower the nose at constant thrust → IAS rises until drag balances again Close the throttle → lower the nose further to keep the IAS W L = W cos γ T D = T + W sin γ W sin γ (forward) L < W and T < D
Chapter 21 · Straight Flight, Climb and Descent
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
In a steady powered descent the flight path points down at an angle gamma. Weight again splits into two. W cos gamma acts at right angles to the path and is balanced by lift. But W sin gamma now acts forward along the path, so it adds to thrust, and together they balance drag. So in a descent lift is less than weight, and thrust is less than drag. Think about how the pilot controls this. If you lower the nose with the thrust unchanged, the forward component of weight grows, the aircraft accelerates, drag rises with speed, and equilibrium returns at a higher indicated airspeed. If instead you close the throttle, thrust disappears, so to keep the same airspeed you must lower the nose further, increasing the descent angle, so that a bigger forward component of weight replaces the lost thrust.
Emergency descent
Getting down fast after a pressurisation failure 10k ft 20k ft 30k ft 40k ft 0 min 1 min 2 min 3 min 4 min idle, speedbrakes out, nose down to MMO / VMO at once slow to VLO first, then gear down: more time up high level off smoothly Cut thrust Close the throttles : no thrust to fight the descent.
Add drag Speedbrakes out; gear down only at or below VLO .
Add speed Lower the nose: MMO high up, then VMO once the IAS reaches it; VLE if gear is down.
Level off smoothly Reduce the rate of descent progressively as the target level nears.
Chapter 21 · Straight Flight, Climb and Descent
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
If the cabin loses pressure at high altitude, the aim is to get everyone down to breathable air as fast as possible. You raise the rate of descent three ways: close the throttles to remove thrust, add drag with the speedbrakes and, if allowed, the landing gear, and lower the nose to gain speed, up to the Mach limit or V M O. Gear down gives the highest rate of descent, but if the gear operating speed is much lower than the cruise speed, you first have to slow down in level flight, wasting minutes at altitude. So the usual technique is throttles closed, speedbrakes out and nose down to M M O at once, which gives a high rate of descent immediately. Descending at constant Mach, the indicated airspeed rises, so when it reaches V M O you raise the nose to hold it. Finally, reduce the rate progressively for a smooth level-off.
The glide
Gliding: three forces and the L/D ratio No thrust: only lift, drag and weight The forward component W sin γ balances drag; W cos γ balances lift Lift and drag combine into a total reaction equal and opposite to weight tan γ = D / L : glide angle depends only on L/D Flattest glide at L/D max , i.e. at VMD ; steeper either side glide path W L D total reaction γ angle exaggerated tan γ = D / L = 1 / (L/D)
Chapter 21 · Straight Flight, Climb and Descent
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
In a glide there is no thrust, only three forces: lift, drag and weight. The forward component of weight, W sin gamma, does the job the engines used to do and balances drag, while W cos gamma is balanced by lift. Another way to see it: lift and drag add up to a total reaction, and in a steady glide that total reaction must be exactly equal and opposite to the weight. The angle between lift and the vertical is the glide angle, so the tangent of the glide angle is drag divided by lift. In other words, the glide angle depends only on the lift to drag ratio. The best, flattest glide comes at the maximum lift to drag ratio, which is at the optimum angle of attack and the minimum drag speed, V M D. Fly faster or slower than V M D and the glide gets steeper.
Worked example
Glide distance = height × L/D 6 000 ft 6 000 ft × 15 = 90 000 ft ≈ 14.8 nm Glide distance = height × L/D L/D max 15 : 1 glide angle = tan⁻¹ (1/15) ≈ 3.8° (vertical scale exaggerated) An L/D of 20 : 1 gives a flattest glide of 1 ft down for every 20 ft forward . These distances apply in still air .
Chapter 21 · Straight Flight, Climb and Descent
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Because the glide angle is set by the lift to drag ratio, the glide distance in still air is simply the height multiplied by L over D. Take a jet with a maximum lift to drag ratio of fifteen to one at six thousand feet. It can glide fifteen times its height: ninety thousand feet, which is about fourteen point eight nautical miles. The glide angle is the angle whose tangent is one fifteenth, about three point eight degrees. A glider with a lift to drag ratio of twenty to one has a flattest glide of one foot down for every twenty feet forward. One small point about wording: strictly the tangent of the angle is D over L, and the ratio of distance to height is L over D, but at these shallow angles the difference between sine and tangent does not matter. And remember that all of this assumes still air; wind comes next.
Effect of weight
A heavier aircraft glides as far, but faster L/D max is independent of weight At the optimum α the glide angle and distance are the same But VMD rises with weight (∝ √W) Faster along the same path → higher rate of descent , less time airborne 20% heavier: VMD and rate of descent ≈ 9.5% higher W L D γ Light W L D γ Heavy Force triangles: same shape, different size (angle exaggerated) Same L/D → same γ → same glide distance Heavier: VMD ∝ √W → faster, higher rate of descent
Chapter 21 · Straight Flight, Climb and Descent
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
What does weight do to the glide? The maximum lift to drag ratio is a property of the shape of the aircraft and its angle of attack, so it does not change with weight. Fly at the optimum angle of attack and the glide angle, and so the glide distance, is the same whatever the weight. What does change is the speed. A heavier aircraft has a bigger forward component of weight, so it accelerates until lift and drag have grown in proportion to balance it. Equilibrium returns at the same lift to drag ratio but at a higher indicated airspeed. V M D goes up with the square root of weight. Twenty per cent heavier gives a V M D about nine and a half per cent higher. Going faster down the same path means a higher rate of descent and less time in the air, but the same distance.
Wind and configuration
Wind and drag devices change the glide Headwind : lower ground speed → less ground distance Tailwind : more ground distanceRate of descent is not affected by wind Flaps, spoilers, speedbrakes, gear: lower L/D → steeper glide, less range Airbrakes at the same speed: higher rate of descent, steeper angle headwind still air tailwind Still air: L/D 16 at 50 kt TAS 25 kt headwind: GS 25 kt → ground ratio 8 : 1 Rate of descent: unchanged by wind
Chapter 21 · Straight Flight, Climb and Descent
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
The still air glide distance only applies in still air. In a headwind the ground speed is lower, so in the same time the aircraft covers less ground and the ground distance is reduced. In a tailwind it is increased. The rate of descent, though, depends only on what happens in the air mass, so wind has no effect on it. Here is an exam calculation. A glider has a lift to drag ratio of sixteen at fifty knots. With a twenty-five knot headwind, its ground speed is only twenty-five knots, half the airspeed, so the ratio of ground distance to height loss halves to eight to one. Configuration matters too. The best lift to drag ratio comes in the clean configuration; flaps, spoilers, speedbrakes and landing gear all reduce it. Extend airbrakes and keep the same speed, and the rate of descent increases and the glide angle gets steeper.
Endurance in the glide
Minimum rate of descent at VMP; best range at VMD IAS → drag power required VMP VMD VMD ≈ 1.32 × VMP CD → CL L/D max (VMD): tangent from origin VMP: least rate of descent Whole-aircraft polar Fly VMD to glide furthest ; fly VMP (slower) to stay airborne longest . Wind changes range, never the rate of descent.
Chapter 21 · Straight Flight, Climb and Descent
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are two best glide speeds, and they answer different questions. For the greatest distance you fly at V M D, the speed of maximum lift to drag ratio. For the longest time in the air you want the minimum rate of descent, and the rate of descent is set by the power the aircraft needs, because power is drag times speed, and in a glide that power comes from losing height. So the minimum rate of descent is at the minimum power speed, V M P, which is slower than V M D. With a simple drag curve, V M D is about one point three two times V M P. On the right is the whole aircraft polar, lift coefficient against drag coefficient. The tangent from the origin touches it at the maximum lift to drag ratio, V M D. V M P sits higher up the curve, at a larger lift coefficient, which means a slower speed.
Summary
What to take into the exam Equilibrium L = W, T = D, Σ moments = 0. Weight through CG, lift through CP ⟂ path.
Tail load CP aft of CG in cruise → tail down-load ; wing lift = W + P.
Climb L = W cos γ (L < W); T = D + W sin γ (T > D); sin γ = (T − D)/W .
VX and VY VX: max excess thrust (jet ≈ VMD, prop < VMD). VY: max excess power ; VY > VX.
Climb factors Weight, altitude, temperature, flap all reduce it. Wind changes ground angle only.
Descent W sin γ forward: L < W and T < D. Emergency: idle, speedbrakes, MMO/VMO.
Glide angle Depends only on L/D ; flattest at VMD. Distance = height × L/D.
Glide effects Weight: same distance, faster, more sink. Headwind: less distance. VMP: least sink.
Chapter 21 · Straight Flight, Climb and Descent
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let us pull it together. Steady flight means equilibrium: lift equals weight, thrust equals drag, and the moments add to zero. In the cruise the centre of pressure is behind the centre of gravity, so the tail pushes down and the wing lifts the weight plus the tail load. In a climb, lift equals W cos gamma, so it is less than weight, and thrust equals drag plus W sin gamma. Sine gamma is excess thrust over weight. V X, best angle, comes from the greatest excess thrust; V Y, best rate, from the greatest excess power, and it is always faster than V X. Weight, altitude, temperature and flap all reduce the climb, while wind changes only the angle over the ground. In a descent lift is less than weight and thrust less than drag. The glide angle depends only on L over D, so weight changes the speed but not the distance, and a headwind shortens the glide.