MASTER SLAVERadio Navigation · Chapter 20
Loran C Long range navigation by hyperbolae: differential range by pulse technique on 100 kHz.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Loran C is a long-range hyperbolic system on 100 kHz. This chapter covers hyperbolae, coverage and chains, the equipment, the principle of differential range by pulse technique, chain identification, slave delays, range, phase coding and accuracy.
Chapter roadmap
What this chapter covers 01
Hyperbolae Definition, baseline, right bisector, extensions; coverage and chains.
02
Operation CRT and timebases, cycle matching, chain ID, slave delays, time differences.
03
Range and accuracy Ground and skywave, multi-pulse and phase coding, accuracy.
Chapter 20 · Loran C
02
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: hyperbolae, operation, and range and accuracy.
Introduction
LOng RAnge Navigation Hyperbolic system on 100 kHz (LF, kilometric)Differential range by pulse technique Time difference between pulses from a master and up to four slaves : a chain Also a non-precision approach aid in the USA MASTER W X Y Z 100 kHz · LF (kilometric) · pulses receiver measures: slave − master arrival time
Chapter 20 · Loran C
03
e-books by eatpl.in · © 2026 · Do not copy or distribute
Loran stands for long range navigation. Loran C is a hyperbolic system on 100 kilohertz, using differential range by pulse technique: it measures the time difference between the arrival at the aircraft of pulses from a master and from up to four slave or secondary transmitters, together called a chain. In the USA it's also used as a non-precision approach aid.
01
Hyperbolae Lines of constant range difference.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Hyperbolae
Constant difference in distance A hyperbola: the locus of all points with the same difference in distance from two fixed points, the foci Here the foci are the master and slave A series of them is a family Range difference = time difference × speed of light M Sto M 188 nm to M 128 nm to M 103 nm to M 103 nm to M 128 nm to M 188 nm to M 128 nm to M 103 nm to M 103 nm to M 128 nm to M 188 nm to S 118 nm to S 58 nm to S 33 nm to S 33 nm to S 58 nm to S 118 nm to S 58 nm to S 33 nm to S 33 nm to S 58 nm to S 118 nm difference: always 70 nm
Chapter 20 · Loran C
05
e-books by eatpl.in · © 2026 · Do not copy or distribute
A hyperbola is the locus of all points with the same difference in distance from two fixed points, the foci. A series of them is a family. In Loran the foci are the master and slave. Measuring the time difference between their pulses and multiplying by the speed of light gives the range difference, and so the hyperbola you are on.
Baseline, bisector and extensions
Special hyperbolae Baseline · right bisector difference 0 on the bisector right bisector baseline C B A B1 C1 M S Baseline extensions difference = whole baseline extension from M from S M S Curved hyperbolae everything in between M S
Baseline Great circle between master and slave ; the master controls the slave.
Right bisector Difference 0 : equidistant from M and S.
Extensions Beyond M or S: difference = the whole baseline . In between: curved.
Chapter 20 · Loran C
06
e-books by eatpl.in · © 2026 · Do not copy or distribute
The baseline is the great circle between master and slave. The right bisector is the hyperbola with zero range difference. The baseline extensions beyond M or S are also hyperbolae, with a difference equal to the baseline. Any hyperbola between the bisector and the extensions is curved.
Coverage and chains
Specified areas only From South-east Asia over the North Pacific, across the USA, the North Atlantic and Europe.
Station Desig Location Eidhi (Master) 7970 Faroes Bo 7970X Norway Sylt 7970W Germany Jan Mayen 7970Z Arctic Ocean Sandur 7970Y Iceland
M · Eidhi (Faroes) W · Sylt X · Bo Y · Sandur Z · Jan Mayen Chain 7970 (Faroes)
Chapter 20 · Loran C
07
e-books by eatpl.in · © 2026 · Do not copy or distribute
Loran C coverage extends from South-east Asia over the North Pacific, across the United States, the North Atlantic and Europe: specified areas only. An example chain is the Faroes chain, 7970: master at Eidhi in the Faroes, slaves at Bo in Norway, X; Sylt in Germany, W; Jan Mayen, Z; and Sandur in Iceland, Y.
02
Operation From pulses on a CRT to a time difference.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Loran equipment
From CRT to computer Older sets: pulses on a CRT , TDs on a readout alternately once a second 9 master pulses, 8 per slave; operator gated the two slaves with the best cutTDs plotted on a Loran chart Modern: up to 8 slaves from 4 chains at once, lat/long out, FMS/RNAV with GPS or INS M W X Y Z timebase 1: master gated, slaves Y and Z gatedY 50000.0 µs Z 64600.0 µs readout: time differences, alternately once a second
Chapter 20 · Loran C
09
e-books by eatpl.in · © 2026 · Do not copy or distribute
Before modern electronics, the pulses were displayed on a cathode ray tube and the time differences on a readout, alternately once a second. The CRT shows the nine gated master pulses and the eight-pulse groups of the four slaves, two of which are gated: those giving the best cut. The microsecond readings were plotted on a Loran chart. Modern receivers evaluate up to eight slaves from four chains at once, giving latitude and longitude or along and across track, and can interface with GPS or INS in FMS/RNAV systems.
Principle of operation
Differential range by pulse technique Timebase 1 whole GRI: master + 4 slave groups, gate two slaves Timebase 2 expanded: gate master and each slave more accurately Timebase 3 8 pulses combined → one strong 250–300 µs pulse 250–300 µsExample: master–Y 50 000 µs and master–Z 64 600 µs . The eight pulses are combined into one strong pulse before cycle matching.
Chapter 20 · Loran C
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Timebase 1 shows the nine master pulses gated at the left and the four slave groups at their time intervals; the operator gates slaves Y and Z, which give the best fix. The distances between master and selected slave pulses are the coarse time differences. Timebase 2 expands the master and then each chosen slave, which are gated more accurately. Timebase 3 combines the eight pulses of the master and each slave into a strong composite pulse of 250 to 300 microseconds.
Cycle matching
The third cycle Time the same cycle of master and slave pulses The third cycle : never contaminated by skywave Then tracking and timing are automatic in ground-wave cover 100 kHz period = 10 µs : accuracy of the order of 10 µs master 3rd cycle slave 3rd cycle skywave arrives: later cycles contaminated 100 kHz: one cycle = 10 µs
Chapter 20 · Loran C
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
Cycle matching, or indexing, measures the time difference between the same cycle in the master and slave pulses. The third cycle is used because it's never contaminated by skywave; once acquired, tracking and timing are automatic throughout flight in ground-wave cover. The 100 kilohertz period is 10 microseconds, so phase matching the cycles gives accuracy of the order of 10 microseconds.
Chain identification
Group repetition interval Basic PRI Specific (group) PRI 50 000 µs basic − 100 µs 60 000 µs basic − 200 µs 80 000 µs basic − 300 µs 100 000 µs … − 400 to 700 µs
Faroes: 80 000 − 300 = 79 700 → code 7970 Johnston Is.: 50 000 − 100 = 49 900 → code 4990 7970 Faroes · GRI 79 700 µs 4990 Johnston Is. · GRI 49 900 µs basic PRI − n × 100 µs = group PRI (GRI): its first four digits name the chain
Chapter 20 · Loran C
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Every station transmits on 100 kilohertz, so chains are identified by a specific or group pulse repetition interval, based on a basic PRI minus a multiple of 100 microseconds. The Faroes chain has a basic PRI of 80 000 and a GRI of 79 700: code 7970. The Johnston Island chain has a basic PRI of 50 000 and GRI 49 900: code 4990.
Slave station time delays
Always W, X, Y, Z time from master transmission (µs) 0 10000 20000 30000 40000 50000 60000 70000 M master transmits (9 pulses) W D = 11000 µs X D = 26000 µs Y D = 46000 µs Z D = 60000 µs amber: master signal travelling to the slave (T) · coloured: the slave's coding (emission) delay DEach slave has its own coding delay (secondary specific, emission or coding delay), so its pulses always arrive after the master and in the order W, X, Y, Z , wherever the receiver is.
Chapter 20 · Loran C
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
The master pulses must arrive at a receiver before the slave pulses, and the slaves in the correct sequence. This is achieved by time delays at the slave transmitters: each has a different delay so that the secondary transmissions always arrive in the order W, X, Y, Z. These are called secondary specific delays, or emission or coding delays.
Differential range by timing
Propagation delay between M and S pulses T : time for a pulse to travel M to SD : coding delay at SBaseline extension from S : D µs Right bisector: (T + D) µs Baseline extension from M : (2T + D) µs Other hyperbolae: between D and 2T + D M S beyond S D right bisector T + D beyond M 2T + DTD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,100 µs TD 11,575 µs TD 12,050 µs TD 12,525 µs TD 13,000 µs TD 13,475 µs TD 13,950 µs TD 14,425 µs TD 14,900 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 15,000 µs TD 14,900 µs TD 14,425 µs TD 13,950 µs TD 13,475 µs TD 13,000 µs TD 12,525 µs TD 12,050 µs TD 11,575 µs TD 11,100 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs TD 11,000 µs T = master→slave time · D = slave coding delay
Chapter 20 · Loran C
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Let T be the time for a pulse to travel from master to slave and D the delay at the slave. The time difference between the master and slave pulses is then D on the baseline extension beyond the slave, T plus D on the right bisector, and 2T plus D on the baseline extension beyond the master; other hyperbolae lie between D and 2T plus D. Multiplying the time difference by the speed of light gives the difference in distance.
03
Range and accuracy Ground wave, skywave and the pulses that beat noise.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Ranges and factors affecting range
Ground wave and skywave E / F layer base transmitter ground wave: 1200 nm sea · 900 nm land skywave: up to 2500 nm
Ground wave By day: 1200 nm over water , 900 nm over land (surface conductivity).
Skywave Up to 2500 nm by night (and by day when conditions permit); E/F layer base; tabulated corrections on charts.
Factors Weather, precipitation static (static wicks), noise; big aerials and power.
Chapter 20 · Loran C
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
Ground waves, affected by the earth's conductivity, give about 1200 miles over water and 900 over land by day. Skywaves can be used up to about 2500 miles by night, and by day when conditions permit, reflected from the base of the E and F layers; skywave timings differ from ground wave, so corrections are tabulated on the Loran charts. Range is reduced by weather, precipitation static, and natural and man-made noise.
Multi-pulse and phase coding
Beating noise, finding chains M1 + + - - + - + - + S1 + + + + + - - + M2 + - - + + + + + - S2 + - + - + + - - pulses 1000 µs apart · master 9th pulse at 2000 µs · each pulse 250–350 µs · phase + or −
Multi-pulse Groups of 8 pulses, 1000 µs apart ; master's 9th at 2000 µs ; pulse 250–350 µs ; combined into one strong pulse.
Phase coding Each pulse + or − in a set sequence (M1, S1, M2, S2…): automatic search , chain ID, no M/S mix-up.
Skywave Phase coding also gives some multi-hop skywave rejection .
Chapter 20 · Loran C
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Master and slave pulses are sent in groups of eight, 1000 microseconds apart, the master group identified by a ninth pulse 2000 microseconds later; each pulse lasts 250 to 350 microseconds. The receiver amalgamates them into a single strong pulse with a good signal to noise ratio. The pulses are phase coded, positive or negative, in a predetermined sequence, master and slave sequences differing, giving automatic search, chain identification, protection against mismatching master and slave pulses and some multi-hop skywave rejection.
Fix accuracy
Depends on range and wave type Good ground wave: better than 0.2 nm , falling to 1 nm at 1000 nm 1000–1200 nm and beyond: ground wave contaminated by skywave Skywave to ~2500 nm: 10–20 nm Best: clear weather, by day, over water , near the baseline (500–1000 nm long) Faults: the master's 9th and a slave's first two pulses blink 0.2 nm 1 nm 10 nm 20 nm 0 500 1000 1500 2000 2500 ground wave sky contamination skywave 10–20 nm range from the stations (nm) · best: on the baseline, by day, over water
Chapter 20 · Loran C
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
In good ground-wave cover accuracy is better than 0.2 miles, falling to about 1 mile at 1000 miles. Beyond 1000 to 1200 miles the ground-wave pulses are contaminated by skywave. Skywave accuracy out to about 2500 miles is 10 to 20 miles, depending on conditions and the corrections. Best results come in clear weather, by day, over water, near the baseline between master and slave; baselines are 500 to 1000 miles. Transmissions are monitored, and the ninth master pulse and the first two slave pulses blink to indicate a fault.
Worked example (not required for the exam)
Where the time differences come from
Baseline M–Y (51 889.06 − 46 000) µs × 300 m ÷ (1852 × 2) = 477 nm
The 50 000 µs hyperbola M→Y time 2944.53 µs; Y→receiver 50 000 − (46 000 + 2944.53) = 1055.47 µs = 171 nm range difference
Check Master 202 nm, slave Y 373 nm: difference 171 nm .
Chapter 20 · Loran C
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
This worked example, not required for the exam, shows that from the delays at Y and the master, the M to Y baseline is 477 miles, and that the 50 000 microsecond hyperbola is a constant range difference of 171 miles: for example 202 miles from the master and 373 from Y.
Summary
What to take into the exam System Hyperbolic, 100 kHz LF (kilometric); master + up to 4 slaves W, X, Y, Z. Specified areas only.
Principle Differential range by pulse technique. Master 9 pulses, slaves 8. Third cycle matched: ~10 µs.
Chain ID GRI = basic PRI − n × 100 µs. 79 700 → 7970.
Delays Coding delay D at each slave: arrival always W, X, Y, Z. TD: D (S ext), T + D (bisector), 2T + D (M ext).
Range Ground wave 1200 nm sea, 900 land; skywave 2500 nm with corrections. Multi-pulse + phase coding.
Accuracy Ground wave 0.2 → 1 nm at 1000 nm; skywave 10–20 nm. Best by day over water near the baseline.
Chapter 20 · Loran C
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six summaries: system, principle, chain identification, delays, range and accuracy.
1. The principle of operation of Loran C is: (a) timing the interval between transmitted and received pulses (b) differential range by frequency comparison (c) differential range by pulse transmissions (d) differential range by phase comparison
2. The frequency and waveband of Loran C are: (a) 100 kHz, hectometric (b) 100 MHz, kilometric (c) 100 MHz, hectometric (d) 100 kHz, kilometric
3. The coverage of Loran C is: (a) specified areas only (b) northern hemisphere only (c) oceanic areas (d) northern hemisphere oceanic areas
Extra A. Basic PRI 60 000 µs, chain offset 200 µs: the chain code?
Extra B. Which cycle is used for cycle matching, and why?
Extra C. TD on the right bisector, with T = 2000 µs and D = 11 000 µs?
Extra D. Daytime ground-wave range over land?
Extra E. In what order do the slave signals always arrive?
Chapter 20 · Loran C
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three questions, plus five extra checks (not).
Practice · Answers
Answers Q Ans Why 1 c Differential range by pulse technique 2 d 100 kHz is LF: kilometric waves 3 a Specified areas only
Extra Answer A 59 800 µs → 5980 B 3rd: never skywave-contaminated C T + D = 13 000 µs D ≈ 900 nm E W, X, Y, Z (coding delays)
Chapter 20 · Loran C
22
e-books by eatpl.in · © 2026 · Do not copy or distribute
Answers to the questions and the extra checks.
Try it yourself
Loran C Lab Fly through the Faroes chain: hyperbolae and live time differences Pick the two slaves with the best cut; ground wave vs skywave accuracy A working CRT: timebases 1–3, gating and third-cycle matching Chain codes, coding delays and D / T + D / 2T + D Practice questions set up in the lab Open the Loran C Lab →
hyperbolae · CRT · chain codes
Chapter 20 · Loran C
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
The Loran C Lab: hyperbolae, the CRT and chain codes.
eatpl.in · Radio Navigation · Chapter 20
Loran C Lab
Fly through a Loran C chain: hyperbolae, time differences, the receiver CRT and chain codes.
Hyperbolic fix CRT Chain codes Practice
Hyperbolic fix (chain 7970)
Drag the aircraft on the chart, or let it fly. Choose the two slaves for the fix.
W Sylt X Bo Y Sandur Z Jan Mayen
Fly Night Over land Pick best cut
The receiver CRT
Timebase 1 Timebase 2 Timebase 3 Cycle match
Add skywave Match on cycle 3 Match on cycle 6
Three questions plus five extra checks. Set each one up in the lab.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.
3D view Orbit Chase
Drag to turn.