Radio Navigation · Chapter 3
Modulation How information is put onto a radio wave: keyed, amplitude, frequency, phase and pulse modulation, sidebands, SSB and emission designators.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Modulation is how we put information onto a radio wave, or format it for other purposes such as the bearing information in a VOR. Five kinds matter in aviation: keyed, amplitude, frequency, phase and pulse modulation. The chapter ends with emission designators.
Chapter roadmap
What this chapter covers 01
Keyed and AM Morse by switching the carrier, then amplitude modulation and its sidebands.
02
SSB, FM and PM Single sideband and its advantages, frequency modulation and phase modulation.
03
Pulses and designators Pulse modulation, and the three-symbol code that labels every emission.
Chapter 3 · Modulation
02
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: keyed and amplitude modulation, then SSB, FM and PM, then pulse modulation and the emission designators.
Introduction
Adding information to a radio wave Modulation : adding information to a radio wave, or formatting it for another purposeUsually speech, but also data (satellite navigation) and bearing (VOR) Sound is first turned into an electrical signal by a microphone: the audio frequency (AF) The wave that carries it is the radio frequency (RF) carrier
Chapter 3 · Modulation
03
e-books by eatpl.in · © 2026 · Do not copy or distribute
Modulation is the name for adding information to a radio wave or formatting it for other purposes. It is usually associated with speech, but satellite navigation data and VOR bearing also rely on it. Before speech can be added it has to be turned into an electrical signal by a microphone; we assume that has been done. Five forms matter in aviation: keyed, amplitude, frequency, phase and pulse.
01
Keyed and amplitude modulation Switching the carrier on and off, then shaping its amplitude.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Keyed modulation
Switch the carrier on and off dash dot dash
Telegraphy Short and long bursts of carrier send Morse code . Until other modulation was developed it was the only way to pass information.
Still in use Some NDBs identify with keyed modulation (Chapter 7): designator N0NA1A.
Chapter 3 · Modulation
05
e-books by eatpl.in · © 2026 · Do not copy or distribute
The simplest way to put information onto a carrier is to interrupt it: short and long bursts of energy make Morse code. This is telegraphy, and for years it was the only way to pass information. Here is Morse K: dash, dot, dash. Some NDBs still use keyed modulation for their identification, which we meet in the ADF chapter.
Amplitude modulation (AM)
The AF's amplitude changes the RF's amplitude Positive AF → the RF gets bigger; negative AF → smaller The outline (envelope) of the RF traces the audio wave The RF frequency does not change AM: amplitude of the RF modified by the amplitude of the AF.
Audio (AF)
Amplitude-modulated RF
Chapter 3 · Modulation
06
e-books by eatpl.in · © 2026 · Do not copy or distribute
In amplitude modulation the amplitude of the audio frequency changes the amplitude of the radio frequency. Where the audio is positive the RF gets bigger, where it is negative it gets smaller, so the outline of the RF, the envelope, traces the audio. The carrier frequency itself is unchanged. Exam wording: the amplitude of the RF is modified by the amplitude of the AF.
Sidebands
Bandwidth is twice the audio frequency Mixing RF and AF (heterodyning ) leaves the RF and adds the sum and difference 2182 kHz carrier + 3 kHz audio → upper sideband 2182–2185 kHz, lower sideband 2179–2182 kHz Bandwidth = 2 × AF = 6 kHzPower: carrier 100 W, each sideband 25 W; the information is in both sidebands, only one third of the signal carries it 2179 kHz 2182 kHz 2185 kHz carrier 100 W LSB 25 W USB 25 W bandwidth 6 kHz = 2 × AF
Chapter 3 · Modulation
07
e-books by eatpl.in · © 2026 · Do not copy or distribute
Combining a radio frequency with an audio frequency is called heterodyning. The RF is left unchanged, and new frequencies appear at the sum and difference. Modulate 2182 kilohertz with 3 kilohertz of audio and you get an upper sideband from 2182.001 to 2185 and a lower sideband from 2181.999 down to 2179. The whole signal spans 2179 to 2185, a bandwidth of 6 kilohertz: twice the audio frequency. The power in the audio is split equally between the two sidebands, 25 watts each with a 100-watt carrier, and each sideband carries all of the information. So only a third of the signal is doing the useful work. Exam: 4716 kilohertz modulated with 6 kilohertz gives a 12 kilohertz bandwidth.
02
SSB, FM and phase Removing the waste, then varying frequency or phase instead of amplitude.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Single sideband (SSB)
Remove the carrier and one sideband Both sidebands carry the same information, and the carrier carries none So send one sideband only : half the bandwidth Used for HF communication (J3E)
More channels Twice as many as double sideband.
Better S/N Less interference and less skywave distortion.
Less power So lighter equipment.
2179 kHz 2182 kHz 2185 kHz carrier 100 W removed LSB 25 W removed USB 25 W bandwidth 3 kHz
Chapter 3 · Modulation
09
e-books by eatpl.in · © 2026 · Do not copy or distribute
Double sideband is wasteful: the information is in both sidebands, and the carrier, having done its job of lifting the audio to radio frequency, carries none. So remove one sideband and the carrier: single sideband. On skywave, a wide bandwidth suffers distortion because different frequencies refract differently, and the ionosphere adds static. SSB gives three advantages: double the number of channels in the crowded MF and HF bands, a better signal-to-noise ratio, and less power so lighter equipment. Exam answer: all of the above.
Frequency modulation (FM)
The AF's amplitude changes the RF's frequency Bigger AF amplitude → bigger frequency deviation The AF's frequency sets how fast the RF frequency swings Broadcast FM needs 150 kHz bandwidth (AM broadcast: 9 kHz), so FM is unsuitable below VHF Narrow-band FM about 8 kHz: still too wide for 6 kHz aviation channels; not used for aviation voice FM: frequency of the RF modified by the amplitude of the AF.
Audio (AF)
Frequency-modulated RF
Chapter 3 · Modulation
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
In frequency modulation the amplitude of the audio changes the frequency of the RF. The louder the audio, the bigger the frequency deviation; the audio's own frequency sets how fast the RF frequency swings up and down. Broadcast FM is allowed 150 kilohertz of bandwidth against 9 for AM broadcasting, so FM is generally unsuitable below VHF. Narrow-band FM cuts that to about 8 kilohertz, still more than the 6 kilohertz of an aviation channel and the 3 of HF, so it is not used for aviation communication. Exam: the frequency of the RF is modified by the amplitude of the AF.
Phase modulation
The input changes the carrier's phase Analogue input: phase shifted by the signal's amplitude Digital input: phase shift keying (PSK) , e.g. 0° = 0, 180° = 1 More phase steps carry more data per symbol GPS uses binary PSK; MLS uses differential PSKBinary phase shift keying: bits 0 1 0 1
0 1 0 1
Chapter 3 · Modulation
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
In phase modulation the input changes the phase of the carrier. With an analogue input the phase shifts with the signal's amplitude. With a digital input it is phase shift keying: for example no shift for a zero and a 180 degree shift for a one; more phase steps can carry more data. Two navigation systems use it: GPS uses binary phase shift keying and MLS uses differential phase shift keying.
Comparison
Amplitude, frequency and phase, side by side Amplitude modulation Frequency modulation Phase modulation (PSK)What changes in the RF Changed by Aviation use AM Amplitude AF amplitude VHF voice (A3E), HF voice as SSB (J3E) FM Frequency AF amplitude (rate = AF frequency) VOR reference signal (CVOR) PM Phase Signal amplitude, or bits (PSK) GPS, MLS
Chapter 3 · Modulation
12
e-books by eatpl.in · © 2026 · Do not copy or distribute
Side by side: AM changes the carrier's amplitude, FM its frequency, PM its phase. Note that in both AM and FM it is the amplitude of the audio that does the modulating. The VOR's 30 hertz reference is FM in a conventional VOR, as we saw in Chapter 8.
03
Pulses and designators Short bursts of energy for radar, and a three-symbol label for every emission.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pulse modulation
Short bursts of energy
Radar Used extensively in radar: send a short pulse, time the echo. Primary radar, SSR and DME all use pulses (DME: P0N).
Data Also used for data exchange in communication systems.
Chapter 3 · Modulation
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
Pulse modulation sends the energy in short bursts. It is used extensively in radar, primary and secondary, and by DME, and for data exchange in communications. The radar chapters cover it in detail.
Emission designators
Three symbols describe any emission
1st: type of modulation N unmodulated · A AM double sideband · H SSB full carrier · J SSB suppressed carrier · F FM · G phase · P unmodulated pulses · K pulses AM
2nd: nature of the modulating signal 0 none · 1 one digital channel, no sub-carrier · 2 one digital channel with sub-carrier · 3 one analogue channel · 7 2+ digital · 8 2+ analogue · 9 composite
3rd: information sent N none · A aural telegraphy · B automatic telegraphy · C fax · D data · E telephony · F television · W combination
A3E = AM double sideband · single analogue channel · telephony: VHF voice. J3E = SSB suppressed carrier · analogue · telephony: HF voice.
Chapter 3 · Modulation
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
Every emission has a three-symbol designator. The first letter is the type of modulation of the main carrier, the second digit the nature of the signal doing the modulating, the third letter the type of information. You don't need the whole table, but you should be able to read the common ones. A3E: A for amplitude modulation, double sideband; 3 for a single channel of analogue information; E for telephony. That is VHF voice. J3E: J for single sideband with suppressed carrier, then 3 and E as before. That is HF voice.
Designators to recognise
Only ADF is likely to be examined System Designator System Designator ADF (NDB) N0NA1A or N0NA2A ILS A8W VHF voice A3E Marker beacons A2A HF voice J3E DME P0N VOR A9W MLS N0XG1D
Chapter 3 · Modulation
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
The designators for the systems in this course. ADF is N0NA1A or N0NA2A, and is the one most likely to be examined; we'll decode it in Chapter 7. VHF voice A3E, HF voice J3E, VOR A9W, ILS A8W, marker beacons A2A, DME P0N, MLS N0XG1D.
Summary
What to take into the exam Keyed Carrier on and off: Morse telegraphy. Some NDB idents.
AM RF amplitude modified by AF amplitude. Bandwidth = 2 × AF.
Sidebands Carrier 100 W, sidebands 25 W each; info in both; one third useful.
SSB One sideband, no carrier: more channels, better S/N, less power.
FM and PM FM: RF frequency modified by AF amplitude; too wide below VHF. PSK in GPS and MLS.
Designators Type · signal · information. A3E VHF voice, J3E HF voice, ADF N0NA1A/2A.
Chapter 3 · Modulation
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six things to remember: keyed modulation for Morse; AM and its bandwidth rule; how power and information split between carrier and sidebands; why SSB is used on HF; what FM and PM change, and why FM is not used below VHF; and how to read a designator.
Practice · Questions
Try these 1. The bandwidth when an RF of 4716 kHz is amplitude modulated with an AF of 6 kHz is: (a) 6 kHz (b) 3 kHz (c) 12 kHz (d) 9 kHz
2. Which is correct for AM? (a) RF amplitude modified by AF frequency (b) RF amplitude modified by AF amplitude (c) RF frequency modified by AF frequency (d) RF frequency modified by AF amplitude
3. An advantage of SSB is: (a) more frequencies available (b) reduced power requirement (c) better signal/noise ratio (d) all of the above
4. Which is correct for FM? (a) RF amplitude modified by AF frequency (b) RF amplitude modified by AF amplitude (c) RF frequency modified by AF frequency (d) RF frequency modified by AF amplitude
Chapter 3 · Modulation
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
The four end-of-chapter questions. Answers on the next slide.
Practice · Answers
Answers and working Q Answer Working 1 (c) 12 kHz Bandwidth = 2 × AF = 2 × 6 kHz; the RF value doesn't matter 2 (b) AM: the RF's amplitude follows the AF's amplitude 3 (d) All of the above More channels, less power, better S/N 4 (d) FM: the RF's frequency is modified by the AF's amplitude
Chapter 3 · Modulation
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
Question 1 hides a distractor: the carrier frequency doesn't affect the bandwidth, only the audio frequency does. Questions 2 and 4 are the same pattern: in both AM and FM it is the amplitude of the audio that does the modulating.
Try it yourself
Modulation Lab See keyed, AM, FM and phase modulation drawn live Change the audio and watch the sidebands and bandwidth Switch to SSB and see what is removed Decode any emission designator Open the Modulation Lab →
carrier LSB USB A3E · J3E · A9W …
Chapter 3 · Modulation
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
The Modulation Lab draws each kind of modulation from an audio signal you control, shows the AM spectrum with power in carrier and sidebands, switches to SSB, and decodes designators.
eatpl.in · Radio Navigation · Chapter 3
Modulation Lab
Change the audio and the modulation type, watch the signal and spectrum, and decode emission designators.
Modulate Designators Practice
End-of-chapter questions. Set each one up, read the answer in the lab, then open the working.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.