WP1 WP2Radio Navigation · Chapter 17
Area Navigation Systems Fly where you need to go, not from beacon to beacon: phantom stations, the FMC and Kalman filtering.
© 2026 eatpl.in. All rights reserved. For the personal study of eatpl.in students only. No part may be copied, reproduced, shared or distributed in any form without prior written permission. Unauthorised use may attract civil and criminal liability under the Copyright Act, 1957.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Area navigation lets an aircraft navigate to the required accuracy without flying over ground facilities. This chapter covers RNAV inputs, benefits, types and levels, the simple 2D VOR/DME system and its limits, the flight management system, the CDU and its pages, waypoint formats, twin and triple IRS operation and Kalman filtering.
Chapter roadmap
What this chapter covers 01
Simple 2D RNAV Inputs, benefits, B-RNAV and P-RNAV, phantom stations, computing the leg and accuracy.
02
The FMS and CDU FMS schematic, levels of automation, the database, IDENT, POS INIT, RTE, waypoint formats, flight phases.
03
Integration Twin and triple IRS, high-latitude de-coupling, Kalman filtering and DME/IRS accuracy.
Chapter 17 · RNAV
02
e-books by eatpl.in · © 2026 · Do not copy or distribute
Three parts: simple 2D RNAV, the FMS and CDU, and integration.
Introduction
Navigate anywhere to a required accuracy RNAV: any system that navigates to the required accuracy without flying over ground facilities Inputs: VOR/DME, ILS/MLS, LORAN, GNSS, INS/IRS, ADC, time Processed to the most accurate, continuously updated position Outputs: course, distance, ETA , steering VOR/DME ILS/MLS LORAN GNSS INS/IRS ADC TIME RNAV computer course / track distance to go ETA cross-track error steering
Chapter 17 · RNAV
03
e-books by eatpl.in · © 2026 · Do not copy or distribute
An area navigation system is any system that lets the aircraft be navigated to the required accuracy without having to fly directly over ground facilities. It uses some or all of VOR/DME, ILS/MLS, LORAN, GNSS, INS/IRS, air data and time, processed into the most accurate continuously updated position, with outputs such as course and ETA.
Benefits of RNAV
Shorter, straighter, more of them More direct routes, not beacon overheads Less distance, time and fuel , and cost More route capacity : parallel, dual and bypass routes in busy TMAs Reduced vertical and horizontal separation direct RNAV: 72% of the airway distance less distance, time and fuel · parallel and bypass routes grey: beacon to beacon · magenta: RNAV direct (and a parallel route)
Chapter 17 · RNAV
04
e-books by eatpl.in · © 2026 · Do not copy or distribute
RNAV allows more direct flight paths, improving efficiency and relieving congestion. ATC has established RNAV routes that are more direct and don't require regular beacon overheads. The benefits: less distance, time and fuel, and so cost; more route capacity through more direct, parallel, dual and bypass routes in busy terminal areas; and reduced vertical and horizontal separation.
01
Simple 2D RNAV Types, phantom stations and accuracy.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Types and levels of RNAV
B-RNAV, P-RNAV; 2D, 3D, 4D B-RNAV ± 5 nm, 95% · ≥ 30 passengers in Eurocontrol airspace P-RNAV ± 1 nm, 95% · terminal airspace 2D · 3D · 4D 2D horizontal (lat/long) 3D + vertical guidance 4D + time
B-RNAV ± 5 nm on 95% of occasions; mandatory in Eurocontrol airspace for aircraft with 30+ passengers .
P-RNAV ± 1 nm on 95% of occasions; being established in terminal airspace .
Levels 2D horizontal; 3D adds vertical guidance; 4D adds timing.
Chapter 17 · RNAV
06
e-books by eatpl.in · © 2026 · Do not copy or distribute
There are two types of RNAV. Basic RNAV gives position accuracy within 5 miles on 95% of occasions, and is mandatory in Eurocontrol airspace for aircraft carrying 30 or more passengers. Precision RNAV must be accurate to 1 mile on 95% of occasions and is being established in terminal airspace. There are three levels of capability: 2D, horizontal only; 3D, adding vertical guidance; and 4D, adding a timing function.
A simple 2D RNAV system
CDU, computer, CDI Navigation computer unit Control display unit (CDU): waypoint, frequency, radial, distanceIndicator: CDI or HSI Waypoints for en route, IAFs, locator outer markers, ILS (selecting an ILS reverts to ILS mode) RNAV CONTROL DISPLAY UNIT 2 WPT 112.10 FRQ 066.0 RAD 29.0 DST RTN RAD CHK DATA 340 1 dot = 1 nm navigation computer CDI / HSI: deviation in nm, distance to the waypoint
Chapter 17 · RNAV
07
e-books by eatpl.in · © 2026 · Do not copy or distribute
A simple 2D RNAV system has a navigation computer unit, a control display unit, and an indicator, a CDI or HSI. Waypoints can be programmed for en-route navigation, initial approach fixes, locator outer markers, and ILS frequencies, which automatically switch the instruments to ILS mode.
Operation
Waypoints as phantom stations Position by rho-theta from VOR/DMEs Pilot defines each waypoint as radial and distance from a suitable VOR/DME Computer works out QDM and distance to the waypoint Shown on the CDI/HSI as if a VOR/DME were there: a phantom station POL VOR/DME phantom station (WP2) 066° / 29 nm measured: POL radial + DME computed: QDM + distance to WP2 shown on the CDI/HSI
Chapter 17 · RNAV
08
e-books by eatpl.in · © 2026 · Do not copy or distribute
A simple RNAV uses rho-theta, range and bearing from VOR/DME, to define position. The pilot defines waypoints along the route as range and bearing from suitable VOR/DMEs. Using the VOR/DME bearing and range, the equipment computes the QDM and distance to the waypoint and presents it on the CDI or HSI as if the waypoint were itself a VOR/DME: a phantom station.
An RNAV route
SND to NEW by phantom stations WP Station Freq Radial/dist Use 1 DTY 116.4 067 / 42 En route 2 POL 112.1 066 / 29 En route 3 NEW 114.25 218 / 26 En route 4 NEW 114.25 251 / 4 Holding LOM 5 I-NC 111.5 – ILS
DTY POL NEW WP1 WP2 WP3 WP4 SND
Chapter 17 · RNAV
09
e-books by eatpl.in · © 2026 · Do not copy or distribute
Here the pilot has defined waypoints along the route from SND to NEW using sensibly placed VOR/DMEs: DTY 067 at 42 miles, POL 066 at 29, NEW 218 at 26, NEW 251 at 4 for the hold at the locator outer marker, and the I-NC ILS.
Principle of operation
Two sides and the angle between: the track POL DTY 145 / 104 066 / 29 067 / 42 WP1 WP21 At WP1, tune POL: 145(R) / 104 nm 2 WP2 is stored as: 066(R) / 29 nm 3 Two sides + included angle: track 340(M), 102 nm 4 Keep comparing position with the computed track 5 CDI shows cross-track error in nm, DIS to WP2 Deviation from track is shown in nautical miles , not degrees, with a continuous range to the next waypoint.
Chapter 17 · RNAV
10
e-books by eatpl.in · © 2026 · Do not copy or distribute
Flying from waypoint 1, defined from DTY, to waypoint 2, defined from POL: at waypoint 1, POL is selected and measured at 145 radial, 104 miles. The computer knows its position relative to POL and waypoint 2 relative to POL, so with two sides, the included angle and magnetic north it computes the track and distance from WP1 to WP2: 340 magnetic, 102 miles. It then keeps comparing the aircraft's position with that track to find the cross-track error and distance to go, feeding steering to the CDI or HSI. Deviations are in nautical miles.
Limitations and accuracy
Geometry, DOC and garbage in STATION NEAR THE TRACK DME along track: along-track most accurate amber: position error (DME small, VOR bearing larger) STATION ABEAM THE TRACK DME across track: across-track most accurate amber: position error (DME small, VOR bearing larger)
DOC Every waypoint within the DOC of the VOR/DME defining it and of the next; stay within DOC at all times.
Slant range Consider DME slant range when choosing facilities close to track .
Inputs The computer can't recognise or correct input mistakes.
Chapter 17 · RNAV
11
e-books by eatpl.in · © 2026 · Do not copy or distribute
The pilot selects the beacons in planning and must make sure each waypoint is within the DOC of the VOR/DME defining it and of the one defining the next waypoint, and that the aircraft stays within DOC. Slant range must be considered for facilities close to track. Inputs must be correct, because the computer can't recognise or rectify mistakes. Accuracy depends on range and on whether the VOR or DME element dominates: with the VOR/DME close to the track, along-track is most accurate; with it perpendicular to the track, across-track is most accurate.
02
The FMS and CDU Level 4 RNAV in a modern airliner.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Level 4 RNAV: the flight management system
Everything talks to the FMC FMC nav · guidance · performance IRS ×2 AIR DATA DME · VOR ILS / MLS · ADF FUEL QTY CLOCK DATABASE LOADER MCDU / CDU AUTOPILOT / FD AUTOTHROTTLE ENGINE CONTROL ND · PFD OFFSIDE FMC737-800: FMCS , AFDS (autopilot/flight director), A/T and two IRS . Together: automatic navigation, guidance and performance, 4D (lat, long, altitude, time), the most economical flight.
Chapter 17 · RNAV
13
e-books by eatpl.in · © 2026 · Do not copy or distribute
In modern airliners the area navigation function is carried out by a flight management computer, which also gives guidance and performance. In the 737-800 the FMS comprises the flight management computer system, the autopilot/flight director, the autothrottle and two inertial reference systems. Each can be used independently, or together as one integrated system giving automatic 4D navigation, guidance and performance management, optimising for the most economical flight.
The FMC and the crew
From data display to full automation FMC: all nav and performance calculations; the CDU is the crew's interface LNAV and VNAV can be coupled to the AFDS and A/TPosition from IRS plus twin DME fixing, blended by Kalman filtering IRS only: a warning that position is downgraded Crew always in control; take-off, altitude selection, ILS tuning and landing are crew tasks PILOTS CDU FMC LNAV · VNAV AFDS · A/T · IRS integrated FMS: 4D (lat, long, altitude, time)
Chapter 17 · RNAV
14
e-books by eatpl.in · © 2026 · Do not copy or distribute
The FMC is the heart of the system, doing all navigation and performance calculations and giving control and guidance commands. The CDU lets the crew input flight details and performance parameters. LNAV and VNAV commands can be coupled to the autopilot and autothrottle. The FMC takes position and heading from the IRS and fixes from twin DME, combining them by Kalman filtering; using IRS alone gives a downgraded-position warning. The crew choose the level of automation and always keep control; some functions, like thrust initiation, take-off, altitude selection, ILS tuning, configuration and landing rollout, are crew only. The crew should monitor the FMC navigation throughout.
The databases
Performance and navigation Performance : aircraft performance and the company's cost indexNavigation : aerodromes, navaids, airways, SIDs/STARs, company routesUpdated every 28 days (ICAO cycle); FMC holds current and next Pilots can read it, not change it cycle 2609 28 days cycle 2610 28 days cycle 2611 28 days cycle 2612 28 days cycle 2613 28 days ACTIVE NEXT (loaded) • aerodromes: positions, elevations, runways • navaids: position, frequency, ident, DOC • airways and reporting points • SIDs, STARs, approaches • company routes performance database: aircraft performance and cost index
Chapter 17 · RNAV
15
e-books by eatpl.in · © 2026 · Do not copy or distribute
The FMC holds a performance database, with the aircraft performance and the company's cost index strategy, and a navigation database for the area of operation: aerodromes, navaids with location, frequency, ident and DOC, airways and reporting points, SIDs, STARs and approaches, and company routes. The navigation data is updated every 28 days, on the ICAO cycle, and the FMC holds the current and next period. It can be customised for the airline.
Control display unit
Line select keys and a scratchpad The crew's way into the FMC; used before flight to initialise Title and page number (e.g. 1/3) at the topUp to 10 data fields , 5 each side, by the LSKs Type into the scratchpad , then press an LSK to insert Pre-flight: check database, input position, airports, SID/STAR, route PAGE TITLE 1/3 DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA <PAGE PAGE> SCRATCHPAD INIT REF RTE CLB CRZ DES MENU LEGS DEP ARR HOLD PROG A B C D E F G H I J K L M N O P Q R S T U V W X Y 1 2 3 4 5 6 7 8 9 . 0 / line select keys 1L–6L 1R–6R title · page 1/3 scratchpad: type, then press an LSK function keys and keyboard
Chapter 17 · RNAV
16
e-books by eatpl.in · © 2026 · Do not copy or distribute
The CDU is the means of communicating with the FMC. Beside the display are line select keys used to insert or select data and move between pages. The top line shows the page title and page number; the centre up to ten data fields, five each side; at the bottom page select prompts and the scratchpad, used to type data before inserting it. Pre-flight the pilot checks the database validity and inputs the aircraft position, departure and destination, SID and STAR, and the route.
The IDENT page
First page after power-up IDENT 1/1 MODEL ENG RATING 737-400 23.5K NAV DATA ACTIVE TBC1880101 JAN01JAN28/89 JAN28FEB25/89 OP PROGRAM 548925-08-01 SUPP DATA JAN21/88 <INDEX POS INIT> IDENT 1/1 MODEL ENG RATING 737-400 23.5K NAV DATA ACTIVE TBC1880101 JAN01JAN28/89 JAN28FEB25/89 OP PROGRAM 548925-08-01 SUPP DATA JAN21/88 <INDEX POS INIT> JAN28FEB25/89 IDENT 1/1 MODEL ENG RATING 737-400 23.5K NAV DATA ACTIVE TBC1880101 JAN28FEB25/89 JAN28FEB25/89 OP PROGRAM 548925-08-01 SUPP DATA JAN21/88 <INDEX POS INIT> 1 power on: self test, then IDENT 2 check the active nav data dates 3 3R: next period to the scratchpad 4 2R: insert it as active 5 6R: on to POS INIT
Chapter 17 · RNAV
17
e-books by eatpl.in · © 2026 · Do not copy or distribute
After its self test the FMS shows the IDENT page: aircraft model and engine thrust at 1L and 1R, the navigation database at 2L, its active period at 2R and the next at 3R, the operating program at 4L and supplementary data at 5R. Only the active nav data can be changed: if it's out of date, press 3R to bring the next period to the scratchpad, then 2R to make it active. 6R leads to POS INIT, 6L to the index.
The POS INIT page
Initialise the IRS POS INIT 1/3 LAST POS N47 32.4 W122 18.7 REF AIRPORT KBFI N47 31.8 W122 18.0 GATE BF21 N47 31.1 W122 18.2 SET IRS POS □□□°□□.□ □□□□°□□.□ GMT-MON/DY SET IRS HDG 1432.2Z 09/20 ---° <INDEX ROUTE> POS INIT 1/3 LAST POS N47 32.4 W122 18.7 REF AIRPORT KBFI N47 31.8 W122 18.0 GATE BF21 N47 31.1 W122 18.2 SET IRS POS □□□°□□.□ □□□□°□□.□ GMT-MON/DY SET IRS HDG 1432.2Z 09/20 ---° <INDEX ROUTE> N4731.1W12218.2 POS INIT 1/3 LAST POS N47 32.4 W122 18.7 REF AIRPORT KBFI N47 31.8 W122 18.0 GATE BF21 N47 31.1 W122 18.2 SET IRS POS N47 31.1 W122 18.2 GMT-MON/DY SET IRS HDG 1432.2Z 09/20 ---° <INDEX ROUTE> 1 2L: departure airport 2 3L: gate (database fills 2R, 3R) 3 3R: gate position to scratchpad 4 4R: insert: boxes = essential data 5 5R dashes: optional heading 6 6R: on to the route
Chapter 17 · RNAV
18
e-books by eatpl.in · © 2026 · Do not copy or distribute
POS INIT initialises IRS position and heading. Dashes mark optional data, boxes essential data. Last position is at 1R. Enter the departure airport at 2L and the gate at 3L, and the FMC fills their positions at 2R and 3R from the database. The boxes at 4R want the IRS position: copy the gate position with 3R into the scratchpad, then insert it with 4R. The standby compass heading at 5R speeds alignment. 6R goes to the route.
The RTE page
Origin, route, runway, activate RTE 1/2 ORIGIN DEST KBFI KMWH CO ROUTE FLT NO BFIMWH 430 RUNWAY 13R VIA TO LACRE3.VAMPS VAMPS V2 ELN ACTIVATE> EXEC 1 1L/1R: origin and destination 2 2L: company route, 2R flight no 3 3L/4L: runway, SID, first waypoint 4 5L/5R: airway, next point (database) 5 6R ACTIVATE, then EXEC
Chapter 17 · RNAV
19
e-books by eatpl.in · © 2026 · Do not copy or distribute
On the route page, departure and destination go at 1L and 1R, the company route at 2L and flight number at 2R, the runway at 3L and SID and first waypoint at 4L. The airway and next point at 5L and 5R come from the database. Activate with 6R, which lights EXEC; press EXEC. After take-off the lines move up as waypoints are passed.
Input formats
Lat/long, idents and place bearing/distance PLACE BEARING / DISTANCE TRN250/76 → TRN01 TRN 250° / 76 nm TRN01 BEARING / BEARING GOW167/TRN090 → GOW01 GOW TRN 167° TRN radial 270 (on bearing 090) GOW01 bearings 3 or 5 digits; distance 1–5 digits
Lat/long 7 group N05W010 or 15 group N0926.3W00504.7 ; leading zeros required.
Idents Up to 5 : aerodromes, reporting points, navaids, airways (EGLL, KODAP, DHD, A23); up to 7 for SIDs/STARs (TURN05).
PBD TRN250/76 → TRN01 ; GOW167/TRN090 → GOW01 .
Chapter 17 · RNAV
20
e-books by eatpl.in · © 2026 · Do not copy or distribute
Valid formats: latitude and longitude as a 7-group like N05W010 or a 15-group like N0926.3W00504.7, with leading zeros; up to 5 characters for aerodromes, reporting points, navaids, airways and runways; up to 7 for SIDs and STARs. A place bearing/distance like TRN250/76 creates waypoint TRN01; a bearing/bearing intersection like GOW167/TRN090 creates GOW01. Bearings are 3 or 5 digits.
Climb, cruise and descent pages
LNAV, VNAV and timing ACT ECON CLB 1/1 CRZ ALT AT MACEY FL330 6000A TGT SPD TO MACEY 280/.72 2004.3Z/19NM SPD REST ERR MACEY 250/10000 310LO CLB N1 90.3/90.3% ACT ECON CRZ 1/1 CRZ ALT STEP TO FL210 FL342 TGT SPD AT .681 2056.2Z/198NM TURB N1 ACTUAL WIND 61.1/61.1% 129°/14 FUEL AT KATL 7.8 ACT ECON PATH DES 1/1 E/D ALT AT MACEY 2013 6000A TGT SPD TO MACEY .720/280 2004.3Z/19NM SPD REST WPT/ALT 240/10000 MACEY/6000 VERT DEV FPA V/B V/S 25HI 3.8 6.2 2360
Chapter 17 · RNAV
21
e-books by eatpl.in · © 2026 · Do not copy or distribute
In the climb, LNAV, VNAV and timing are normally active: cruise altitude, current restriction, economy speed, speed restriction defaulting to 250 knots below 10 000 feet, ETA and distance to the next point, height error and climb N1. In the cruise: cruise level, optimum and maximum levels, step climb with time and distance, economy speed, N1, wind and predicted fuel. In the descent: end of descent altitude, next restriction, target speeds, speed transition, vertical deviation, flight path angle, vertical bearing and rate of descent.
03
Integration IRS, FMC and Kalman filtering.
e-books by eatpl.in · © 2026 · Do not copy or distribute
Twin IRS, twin FMC
Two opinions need a referee Left FMC ← left IRS; right FMC ← right IRS If they disagree, neither can tell which is wrong: an external reference decides Kalman: IRS dominates early; external reference gains weight later Modes: dual (master/slave), independent , single FMC, or IRS direct to EFIS (no performance) IRS L IRS R FMC L FMC R DME / DME compare disagree? need an external reference
Chapter 17 · RNAV
23
e-books by eatpl.in · © 2026 · Do not copy or distribute
With twin IRS, the left FMC normally uses the left IRS and the right FMC the right. They compare positions, but on their own can't tell which is in error, so an external reference is needed. Kalman filtering compares it with the IRS positions: early in the flight the IRS dominates; as the IRS degrades, the external reference's weighting grows. In dual mode one FMC is master and one slave, positions cross-checked before going to the EFIS. In independent mode each works alone. One FMC can do the job if the other fails; with both failed, the IRS feeds the EFIS directly and the automatic performance functions are lost.
Triple IRS, twin FMC
Average three, de-couple above 84° Triple IRS positions compared for gross errors, then averaged Compared with an external reference: DME/DME, VOR/DME, LORAN C or GNSS Above 84° : FMCs de-couple , left uses L, C, R; right uses R, C, L Why: change of longitude ∝ sec(latitude) , huge near the pole > 84° 60° 70° 80° 84° 90° 10 20 30 sec(latitude): ×14.3 at 86° sec 86°00′ = 14.3356, sec 86°01′ = 14.3955 left FMC: IRS L, C, R · right FMC: IRS R, C, L
Chapter 17 · RNAV
24
e-books by eatpl.in · © 2026 · Do not copy or distribute
With triple IRS, positions and heading go to the FMC, are checked for gross errors and averaged, then compared with an external reference such as DME/DME, VOR/DME, LORAN C or GNSS, with Kalman filtering producing position and velocity. Above 84 degrees latitude the FMCs de-couple: the left uses the IRS in the order left, centre, right, and the right in the order right, centre, left. The reason is that change of longitude depends on the secant of latitude, which grows rapidly near 90 degrees, so a tiny latitude error makes a large apparent longitude difference between the IRSs.
Kalman filtering and DME/IRS accuracy
Short-term IRS, long-term external reference 2 nm 4 nm 6 nm 0 h 1 h 2 h 3 h 4 h 5 h 6 h IRS alone: ≈ 1 nm per hour DME: ± 0.25 nm ± 1.25% Kalman blend take-off update TOC TOD (worst) ILSIRS heading and groundspeed stay accurate but position drifts about 1 nm/hr . DME error is constant at ± 0.25 nm ± 1.25% (1.5 nm at 100 nm). The FMC picks DMEs with a good cut and corrects for slant range. Most accurate after the runway update, least accurate before descent , better again on a precision approach.
Chapter 17 · RNAV
25
e-books by eatpl.in · © 2026 · Do not copy or distribute
Kalman filtering combines the short-term accuracy of the IRS with the long-term accuracy of the external reference. Initially the IRS is most accurate, but as its errors ramp up the external reference becomes more accurate, and the weighting shifts towards it. So the position is best after the runway update, decays towards the external reference's accuracy, and improves again on a precision approach. IRS position degrades at about a mile an hour, though heading and groundspeed stay accurate. DME error is constant at plus or minus 0.25 miles plus 1.25% of range, 1.5 miles at 100 miles; after a few hours DME fixing is far better than the IRS.
Summary
What to take into the exam RNAV Navigate to required accuracy without overflying aids. B-RNAV ± 5 nm, P-RNAV ± 1 nm (95%). 2D, 3D, 4D.
Simple 2D VOR/DME rho-theta; waypoints as radial/distance: phantom stations; deviation in nm; within DOC; inputs unchecked.
FMS FMC + CDU, AFDS, A/T, IRS. LNAV/VNAV. Nav database 28 days, current + next, read only.
CDU sequence IDENT (3R → 2R) → POS INIT (3R → 4R) → RTE (ACTIVATE, EXEC).
Formats N0926.3W00504.7; ≤ 5 alphanumerics for navaids, points, airways; ≤ 7 SID/STAR; TRN250/76 → TRN01.
Integration Kalman: short-term IRS + long-term external. Worst at TOD. De-couple above 84°. VOR used within 25 nm.
Chapter 17 · RNAV
26
e-books by eatpl.in · © 2026 · Do not copy or distribute
Six summaries: RNAV, simple 2D, the FMS, the CDU sequence, formats and integration.
Practice · Questions 1–8
Try these 1. Accuracy of precision RNAV: (a) 0.25 (b) 2 (c) 1 (d) 0.5 nm
2. A basic 2D RNAV gets tracking information from: (a) twin DME (b) VOR/DME (c) twin VOR (d) any
3. WP1–WP2 45 nm; aircraft 20 nm from the phantom station (270/30 from the VOR/DME) and 15 nm from the VOR/DME. Range readout: (a) 15 (b) 20 (c) 25 (d) 30 nm
4. Sequence of initialisation pages: (a) POS INIT, IDENT, RTE (b) IDENT, RTE, POS INIT (c) IDENT, POS INIT, RTE (d) POS INIT, RTE, IDENT
5. The IRS position can be updated: (a) on the ground only (b) designated positions en route and ground (c) ground and overhead VOR/DME (d) selected waypoints and ground
6. (POS INIT) Selections to insert the most accurate IRS position: (a) 3R then 4R (b) 2R then 4R (c) 4R then 3R (d) 3L then 4R
7. The B737-400 FMC position is: (a) average of two IRS (b) average, Kalman smoothed (c) from the selected IRS, Kalman smoothed and updated to the external reference (d) from the external reference, updated by the IRS
8. FMC position is most inaccurate: (a) take-off (b) TOC (c) TOD (d) final approach
Chapter 17 · RNAV
27
e-books by eatpl.in · © 2026 · Do not copy or distribute
Practice · Questions 9–15
Try these 9. Input with up to 5 alphanumerics: (a) SIDs/STARs, points, airways (b) navaids, reporting points, airways (c) SIDs/STARs, lat/long (d) lat/long, points, airways
10. Pilots can access the nav database: (a) to update it (b) to read only (c) to change between updates (d) to change for the sector
11. Above 84° twin FMS/triple IRS de-couple: (a) to prevent error messages as IRS longitudes differ widely (b) workload (c) accuracy (d) variation
12. Max range VOR bearing is used by the B737-400 FMC for fixing: (a) 10 (b) 25 (c) 50 (d) 60 nm
13. The FMC combines: (a) long-term IRS + short-term external (b) long + long (c) short + short (d) short-term IRS + long-term external
14. Format for 50N 00527E: (a) 5000.0N00527.0E (b) N50E00527 (c) N5000.0E00527.0 (d) N5000E00527
15. Validity of the nav database: (a) 28 days (b) 1 month (c) 28–91 days (d) 91 days
Chapter 17 · RNAV
28
e-books by eatpl.in · © 2026 · Do not copy or distribute
The questions 9 to 15. Answers next.
Practice · Answers
Answers Q Ans Why 1 c P-RNAV ± 1 nm 2 b VOR/DME rho-theta 3 b Readout is to the phantom: 20 nm 4 c IDENT, POS INIT, RTE 5 a On the ground 6 a 3R (gate) then 4R 7 c Selected IRS, Kalman, external update 8 c TOD
Q Ans Why 9 b Navaids, points, airways 10 b Read only 11 a sec(lat): big longitude differences 12 b 25 nm 13 d Short-term IRS, long-term external 14 c N5000.0E00527.0 15 a 28 days
Chapter 17 · RNAV
29
e-books by eatpl.in · © 2026 · Do not copy or distribute
Answers to all 15, with the reason for each.
Fly the WP1 → WP2 leg using POL as a phantom station Add wind and watch cross-track error in nm; engage LNAV Initialise a working CDU: IDENT, POS INIT, RTE, EXEC Kalman filtering: IRS drift, DME error and the blend 15 practice questions set up in the lab Open the RNAV Lab →
RTE 1/2 ORIGIN DEST EGLL EHAM CO ROUTE FLT NO LLAM01 EAT101 RUNWAY 27R VIA TO BPK7G BPK ACTIVATE> phantom stations · CDU · Kalman
Chapter 17 · RNAV
30
e-books by eatpl.in · © 2026 · Do not copy or distribute
The RNAV Lab: phantom stations, the CDU and Kalman filtering.
eatpl.in · Radio Navigation · Chapter 17
RNAV Lab
Fly a phantom-station RNAV leg, initialise a working FMC CDU, and watch Kalman filtering.
2D RNAV FMC CDU Kalman Practice
2D RNAV leg
The leg: WP1 (DTY 067/42) to WP2 (POL 066/29). At WP1 POL reads 145/104; the computer works out 340°/102 nm.
LNAV Restart at WP1 Q3 geometry
Initialise the FMC
Task: the active nav data is out of date. Fix it, then POS INIT, then the route.
Kalman filtering
External reference On ILS
15 practice questions. Set each one up in the lab, read the answer, then open the working.
E-book and lab by eatpl.in · © 2026 eatpl.in. For the personal study of eatpl.in students. Do not copy or distribute.
3D view Orbit Chase Top
Drag to turn.