EXTRACT

30 questions · tap an answer to check it

Learn this topic firstMass and Balance RulesMass and Balance course →

About this topic

EXTRACT: 30 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from EXTRACT

  1. EASA Mass and Balance legislation can be found in:
    • A) EU-OPS 1 subpart A
    • B) EU-OPS 1 subpart D
    • C) EU-OPS 1 subpart K
    • D) EU-OPS 1 subpart J
    Show answer

    D) EU-OPS 1 subpart J

  2. The mass and centre of gravity of an aircraft must be established by actual weighing:
    • A) by the pilot on entry of aircraft into service
    • B) by the engineers before commencing service
    • C) by the manufacturer prior to initial entry of aircraft into service
    • D) by the owner operator before the first flight of the day
    Show answer

    C) by the manufacturer prior to initial entry of aircraft into service

  3. The operator must establish the mass of the traffic load
    • A) prior to initial entry into service
    • B) by actual weighing or determine the mass of the traffic load in accordance with standard masses as specified in EU-OPS subpart J
    • C) prior to embarking on the aircraft
    • D) by using an appropriate method of calculation as specified in the EU-OPS 1 subpart J
    Show answer

    B) by actual weighing or determine the mass of the traffic load in accordance with standard masses as specified in EU-OPS subpart J

  4. The mass of the fuel load must be determined:
    • A) by the operator using actual density or by density calculation specified in the Operations Manual
    • B) by the owner using actual density or by density calculation specified in EUOPS 1 subpart J
    • C) by the pilot using actual density or by density calculation specified in the Operations Manual
    • D) by the fuel bowser operator using actual density or by density calculation specified in the Fuelling Manual
    Show answer

    A) by the operator using actual density or by density calculation specified in the Operations Manual

  5. The dry operating mass is the total mass of the aeroplane ready for a specific type of operation and includes:
    • A) Crew and passenger baggage, special equipment, water and chemicals
    • B) Crew and their hold baggage, special equipment, water and contingency fuel
    • C) Crew baggage, catering and other special equipment, potable water and lavatory chemicals
    • D) Crew and their baggage, catering and passenger service equipment, potable water and lavatory chemicals
    Show answer

    D) Crew and their baggage, catering and passenger service equipment, potable water and lavatory chemicals