About this topic
GYROSCOPES: 10 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from GYROSCOPES
- Rigidity of a gyroscope depends on:
- A) weight, force applied and speed of rotation.
- B) rate of precession and the force applied.
- C) weight, rate of precession and speed of rotation.
- D) mass, radius of gyration and speed of rotation.
Show answer
D) mass, radius of gyration and speed of rotation.
- A force is applied to deflect a gyroscope. If the RPM of the gyro is then doubled the precession rate will:
- A) remain as before.
- B) increase
- C) decrease
- D) cease altogether.
Show answer
C) decrease
- In gyroscopic theory the term ‘topple’ is defined as:
- A) real wander only, in the horizontal plane.
- B) real wander only, in the vertical plane.
- C) wander, real or apparent, in the vertical plane.
- D) wander, real or apparent, in the horizontal plane.
Show answer
C) wander, real or apparent, in the vertical plane.
Definition of Topple: Wander, real or apparent, in the vertical plane. It describes the movement or deviation of the gyroscope’s axis in the vertical plane, which could be caused by external forces, misalignment, or environmental factors. Key Characteristics: Real Topple: Actual physical movement of the gyroscope due to unbalanced forces or torques acting on it. Can occur due to external disturbances, such as vibrati - A force applied to the spinning axis of a rotor is precessed:
- A) through 90° in the direction of spin of the rotor.
- B) through 90° in the direction of spin of the rotor in the northern hemisphere through 90° in the opposite direction in the southern hemisphere.
- C) through 270° in the direction of spin of the rotor.
- D) at a rate proportional to the speed of rotation of the gyro.
Show answer
A) through 90° in the direction of spin of the rotor.
- In gyroscopic theory the term ‘drift’ is defined as:
- A) real wander only, in the horizontal plane.
- B) wander, real or apparent, in the vertical plane.
- C) apparent wander only, in the horizontal plane.
- D) wander, real or apparent, in the horizontal plane
Show answer
D) wander, real or apparent, in the horizontal plane
Real Wander Whenever the spin axis actually moves relative to a fixed point in space, the gyro is said to be suffering real wander, that is to say real drift, real topple or a composite of both. Apparent Wander Whenever the spin axis of a perfect gyro (with no real wander) appears to an Earth bound observer to be changing direction, the gyro is said to be suffering from apparent wander