About this topic
KW GYRO SCOPE: 89 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from KW GYRO SCOPE
- The building principle of a gyroscope, the best efficiency is obtained through the concentration of the mass?
- A) Close to the axis and with a low rotation speed.
- B) On the periphery and with a high rotation speed.
- C) Close to the axis and with a high rotation speed.
- D) On the periphery and with a low rotation speed.
Show answer
B) On the periphery and with a high rotation speed.
- A Standby horizon or emergency attitude indicator?
- A) Only works of there is a complete electrical failure.
- B) Contains its own separate gyro.
- C) Is automatically connected to the primary vertical gyro if the alternator fails.
- D) Is fully independent of external energy resources in an emergency situation.
Show answer
B) Contains its own separate gyro.
- The basis properties of a gyroscope are? 1.The gyro's weight. 2.The rigidity in space. 3.The inertia.4. The high RPM. 5. The precession The combination of correct statements is?
- A) 3, 4.
- B) 2, 5.
- C) 2, 3, 5.
- D) 1, 3, 5.
Show answer
B) 2, 5.
- The indications of the directional gyro when used as an on-board instrument are valid only for a short period of time. The causes of this inaccuracy are? 1. The earth's rotation. 2. The longitudinal acceleration. 3. The aircraft's motion over the surface of the earth. 4. The mechanical defects of the gyro. 5. The gimbal mount of the gyro rings. The combination of correct statements is?
- A) 1, 3, 4.
- B) 1, 2, 3, 4, 5, 6.
- C) 2, 5, 6.
- D) 1, 3, 4, 6.
Show answer
D) 1, 3, 4, 6.
- The charcteristics of he directional gyro (DG) used in a gyro stabilised compass system are?
- A) One degree of fredom, whose vertical axis, aligned with the real vertical to the location is maintained in this direction by an automatic erecting system.
- B) Two degress of freedom, whose horizontal axis corresponding to the reference direction is maintained in the horizontal plane by an automatic erecting system.
- C) Two degress of freedom, whose axis aligned with the vertical to the location is maintained in this direction by an erecting system.
- D) One degree of freedom, whose horizontal axis is maintained in the horizontal plane by an automatic erecting system.
Show answer
B) Two degress of freedom, whose horizontal axis corresponding to the reference direction is maintained in the horizontal plane by an automatic erecting system.