MEASUREMENT OF ELEMENTS

44 questions · tap an answer to check it

Learn this topic firstCritical Point and Point of No ReturnGeneral Navigation course →

About this topic

MEASUREMENT OF ELEMENTS: 44 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from MEASUREMENT OF ELEMENTS

  1. For flight fuel of 2000 Kg calculated Dpnr = 500 nm. If Flight Fuel is increased by 200 Kg, Dpnr will be:
    • A) 520
    • B) 550
    • C) 450
    Show answer

    B) 550

  2. Full TAS 500 kt. Engine failure TAS 400 kt. Total distance 1000 nm. Along track wind component 40 kt. The distance to the engine failure CP will be:
    • A) 450nm
    • B) 550nm
    • C) 450 or 550nm depending on the wind direction
    Show answer

    C) 450 or 550nm depending on the wind direction

  3. The distance to the PNR will be greatest:
    • A) If there is a tailwind component going out
    • B) If there is a headwind component going out
    • C) In still air conditions
    Show answer

    C) In still air conditions

  4. An engine failure PNR is calculated to enable the pilot to make the correct decision in the event of:
    • A) An engine failing before reaching the mid-point
    • B) An engine failing after reaching the mi-point
    • C) the destination and its alternates closing any time up to the PNR
    Show answer

    C) the destination and its alternates closing any time up to the PNR

  5. In flight it is discovered that the winds used have been reversal, the effect will be:
    • A) No effect on the distance to the PET but the ETA at it will be affected.
    • B) Change the distance tot he PNR
    • C) Give the distance of the PET from the base ahead instead of from the base behind.
    Show answer

    C) Give the distance of the PET from the base ahead instead of from the base behind.