OXFORD ENGINES Compressor

40 questions · tap an answer to check it

Learn this topic firstCompressorsEngines course →

About this topic

OXFORD ENGINES Compressor: 40 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from OXFORD ENGINES Compressor

  1. The pressure ratio of a gas turbine engine compressor is:
    • A) Equal to the number of compression stages.
    • B) The ratio between compressor outlet and compressor inlet pressure.
    • C) The ratio between exhaust inlet and exhaust outlet pressure.
    • D) Never greater than 5 to 1.
    Show answer

    B) The ratio between compressor outlet and compressor inlet pressure.

  2. The compressor idling speed of a gas turbine engine will increase:
    • A) At higher ambient temperature.
    • B) With higher than sea level density.
    • C) At altitudes lower than sea level.
    • D) At lower ambient temperature.
    Show answer

    A) At higher ambient temperature.

  3. One stage of an axial flow compressor consists of:
    • A) One rotor assembly and one row of stator vanes.
    • B) One stator assembly and one row of guide vanes.
    • C) One rotor and one impeller assembly.
    • D) One impeller and one diffuser assembly.
    Show answer

    A) One rotor assembly and one row of stator vanes.

  4. The pressure rise across each stage of an axial flow compressor is:
    • A) Greater than that of a centrifugal compressor.
    • B) Between 3 and 5 to one.
    • C) Twice the inlet pressure.
    • D) Between 1.1 and 1.2 to one.
    Show answer

    D) Between 1.1 and 1.2 to one.

  5. The ring of blades which sometimes precede the first rotor stage of an axial flow compressor are called:
    • A) The first stage stator blades.
    • B) The inlet guides vanes.
    • C) First stage diffuser blades.
    • D) Nozzle guide vanes.
    Show answer

    B) The inlet guides vanes.