Specimen Examination Paper

23 questions · tap an answer to check it

Learn this topic firstMass Definitions and LimitsMass and Balance course →

About this topic

Specimen Examination Paper: 23 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from Specimen Examination Paper

  1. Determine the position of the CG as a percentage of the MAC given that the balance arm of the CG is 724 and the MAC balance arms are 517 to 1706:
    • A) 14.2%
    • B) 15.3%
    • C) 16.3%
    • D) 17.4%
    Show answer

    D) 17.4%

  2. The distance from the datum to the CG is:
    • A) the index
    • B) the moment
    • C) the balance arm
    • D) the station
    Show answer

    C) the balance arm

  3. Use CAP 696, MRJT 1, fig 4.9. What is the balance arm, the maximum compartment load and the running load for the most aft compartment of the fwd cargo hold?
    • A) 421.5 cm 3305 kg 13.12 kg per inch
    • B) 1046.5 inches 711 kg 7.18 kg per kg
    • C) 421.5 inches 2059 kg 13.12 kg per inch
    • D) 1046.5 m 711 kg 7.18 kg per in
    Show answer

    C) 421.5 inches 2059 kg 13.12 kg per inch

  4. Individual aircraft should be weighed in an air conditioned hangar:
    • A) on entry into service and subsequently every 4 years
    • B) when the effects of modifications or repairs are not known
    • C) with the hangar doors closed and the air conditioning of
    • D) all the above
    Show answer

    D) all the above

  5. If a compartment takes a maximum load of 500 kg, with a running load limit of 350 kg/m and a distribution load limit of 300 kg/m² max, which of the following boxes, each of 500 kg, can be carried?
    • A) Any one of the boxes if loaded with due care as to its positioning
    • B) Either of boxes 2, 3 and 4 in any configuration
    • C) Box 2 with its longest length perpendicular to the floor cross beam or box 3 in any configuration
    • D) Either of boxes 3 and 4 with their longest length parallel to the aircraft longitudinal axis
    Show answer

    D) Either of boxes 3 and 4 with their longest length parallel to the aircraft longitudinal axis