About this topic
Air Conditioning A320: 166 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from Air Conditioning A320
- Conditioned air is distributed to:
- A) Cockpit, cargo bays and cabin
- B) Cockpit, fwd and aft cabins
- C) Cockpit, avionics bay and cabin
- D) Cockpit, cabin and holds 1 and 2 only
Show answer
B) Cockpit, fwd and aft cabins
The air conditioning system is fully automatic. It provides continuous air renewal and maintains a constant, selected temperature in the following three zones : COCKPIT, FWD CABIN, AFT CABIN. These three zones are independently controlled. - Hot air fault light illuminates on the air conditioning panel,
- A) The hot air press. reg. valve opens and the trim air valves close.
- B) The hot air press. reg. valve closes and the trim air valves open.
- C) The hot air press. reg. valve closes and the trim air valves close.
- D) The hot air press. reg. valve opens and the trim air valves open.
Show answer
C) The hot air press. reg. valve closes and the trim air valves close.
- Does the trim air provide the warm air or the cold air to the air conditioning system?
- A) Cold air
- B) Warm air
Show answer
B) Warm air
TRIM AIR VALVES are electrically-controlled by the zone controller or the ACSC . A trim air valve, associated with each zone, adjusts the temperature by adding hot air. The cockpit trim air valve is controlled by the ACSC 1 , and the cabin trim air valves are controlled by the ACSC 2. - In case of zone controller primary and secondary channel failure, what temperatures are maintained by pack one and pack two?
- A) 15 deg.C both
- B) 25 deg.C both
- C) 20 deg.C for pack one and 10 deg.C for pack two
- D) 24 deg.C for pack one and 15 deg.C for pack two
Show answer
C) 20 deg.C for pack one and 10 deg.C for pack two
Optimized regulation is lost. Trim air valves are driven to the fully closed position. Pack 1 controls the cockpit temperature to the selected value and pack 2 controls the cabin temperature (FWD and AFT) to the mean value of the selected temperatures. Pack 1: ~20°C Pack 2: ~10°C - In normal flight in closed circuit configuration, the avionics ventilation system controls the temperature of the cooling air by:
- A) 'Adding air conditioned air to the flow
- B) Extracting air overboard
- C) Adding avionics bay air
- D) Passing air through a skin heat exchanger
Show answer
D) Passing air through a skin heat exchanger
In closed-circuit configuration during normal flight, the system modulates the skin heat exchanger bypass valve to control cooling air temperature.