About this topic
Automatic Flight A320: 236 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.
Sample questions from Automatic Flight A320
- The Flight Management part of the FMGC includes the following elements:
- A) Navigation, flight planning and A/THR commands.
- B) Performance optimization, A/THR and AP commands
- C) Navigation, flight planning, performance optimization and flight predictions
- D) AP and FD commands and flight envelope computation.
Show answer
C) Navigation, flight planning, performance optimization and flight predictions
- How can the present position of the aircraft be initialized?
- A) Present position can be entered through the ADIRS CDU.
- B) Present position can be entered on the INIT page of the MCDU.
- C) Both are correct.
Show answer
C) Both are correct.
- What are the correct positions for the PFD and ND?
- A) The PFD should be outboard and the ND should be inboard.
- B) The PFD should be inboard and the ND should be outboard.
- C) The PFD should be to the left of the ND for both seat positions.
- D) The PFD should be inboard and the ND should be inboard.
Show answer
A) The PFD should be outboard and the ND should be inboard.
- How long does a normal IR alignment take?
- A) Approximately 3 minutes.
- B) Approximately 6 minutes.
- C) Approximately 10 minutes.
- D) Approximately 13 minutes.
Show answer
C) Approximately 10 minutes.
- The IR ALIGN light is extinguished. What does this mean?
- A) Alignment has been completed.
- B) Air data output has been disconnected.
- C) The respective IR is operating normally.
Show answer
A) Alignment has been completed.