CLIMBING FLIGHT

100 questions · tap an answer to check it

Learn this topic firstStraight Flight, Climb and DescentPrinciples of Flight course →

About this topic

CLIMBING FLIGHT: 100 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from CLIMBING FLIGHT

  1. What speed is required to achieve maximum endurance in a piston engine powered and jet engine powered aircraft respectively?
    • A) VMD, VMP
    • B) VMP, VMD
    • C) VMO, VMP
    • D) VMP, VMO
    Show answer

    B) VMP, VMD
    The speed required to achieve maximum endurance is different for piston and jet engine aircraft due to their differing power and thrust characteristics. For a piston engine powered aircraft, maximum endurance is achieved at VMP (Minimum Power Speed), which is the speed where the power required is minimum, allowing the engine to run at lowest fuel consumption per unit time. For a jet engine powered aircraft, maximum e

  2. Select the appropriate words to complete the following statement. Fuel flow in a piston engine aircraft is proportional to ………. whilst that in a jet powered aircraft is proportional to ……… Thrust output of a jet engine ……………… with increasing airspeed whilst that of a piston engine ……………. 1. Is approximately constant 2. Thrust 3. Reduces rapidly 4. Power 5. RPM
    • A) 5,2,1,3.
    • B) 4,2,3,1.
    • C) 4,2,1,3.
    • D) 2,4,3,1.
    Show answer

    C) 4,2,1,3.
    Fuel flow in a piston engine aircraft is proportional to power, whilst that in a jet powered aircraft is proportional to thrust. Thrust output of a jet engine is approximately constant with increasing airspeed, whilst that of a piston engine reduces rapidly.

  3. Select the correct words to complete the following statement. To achieve the maximum possible glide range it is necessary to fly at ……….. This is achieved by flying the aircraft in a ……………….. condition and at ………?
    • A) BEST L:D RATIO, 20° FLAPS, VMP
    • B) BEST L²:D RATIO, FLAPS UP, VMD
    • C) BEST L:D RATIO, FLAPS UP, VMD
    • D) BEST L²:D RATIO, FLAPS UP, VMP
    Show answer

    C) BEST L:D RATIO, FLAPS UP, VMD
    Maximum glide range means covering the greatest horizontal distance for a given loss of altitude. This occurs at the best Lift-to-Drag (L:D) ratio, where the aircraft generates enough lift while minimizing drag. Flying at this condition allows the aircraft to maintain the optimum balance between lift and drag, maximizing glide distance. To achieve the best L:D ratio, the aircraft must fly with flaps up because deploy

  4. What speed is required to achieve maximum angle of climb in a jet aircraft and a piston aircraft respectively and for what purpose might this be required?
    • A) VMD Minimum safe speed Obstacle clearance after take-off.
    • B) VMP Minimum safe speed Obstacle clearance after take-off.
    • C) Minimum safe speed VMD Gain height rapidly.
    • D) VMD Minimum safe speed Gain height rapidly.
    Show answer

    A) VMD Minimum safe speed Obstacle clearance after take-off.
    For maximum angle of climb, a jet aircraft flies at VMD because thrust is nearly constant and excess thrust peaks at minimum drag speed. A piston aircraft flies at minimum safe speed since thrust decreases with speed, maximizing climb angle there. This speed is used mainly for obstacle clearance after take-off to safely gain altitude.

  5. What is the effect of increasing altitude on best rate of climb IAS and best climb TAS respectively?
    • A) Increases Decreases
    • B) Constant Increases
    • C) Decreases Constant
    • D) Decreases Increases
    Show answer

    D) Decreases Increases
    As altitude increases, the best rate of climb indicated airspeed (IAS) decreases due to lower air density affecting the IAS scale. However, the best climb true airspeed (TAS) increases because true airspeed rises with altitude for the same indicated airspeed. This allows the aircraft to cover more ground while climbing at higher altitudes.