COMMUNICATION

48 questions · tap an answer to check it

Learn this topic firstCommunicationsAir Law course →

About this topic

COMMUNICATION: 48 multiple-choice questions for the DGCA CPL and ATPL examinations. Every question shows the correct answer and an explanation. You can practise free for a few minutes; a subscription opens every question bank, previous paper and airline preparation set.

Sample questions from COMMUNICATION

  1. If you are requested to report your height, to which Q-code-setting would you refer?
    • A) QFE
    • B) QNH
    • C) QBI
    Show answer

    A) QFE
    QFE: QFE is the mean sea level pressure corrected for temperature and adjusted for a specific reference point of an airfield or the point needed. Generally, for aerodromes the highest point of the runway is set to be reference.

  2. Which Q-code is used to report altitude?
    • A) QFF
    • B) QNJ
    • C) QNH
    Show answer

    C) QNH
    QNH refers to the pressure at sea level adjusted for the local weather conditions at a specific location. Pilots use the QNH setting to adjust their altimeter so that it reflects the correct altitude above mean sea level (MSL) during flight operations, particularly during landing approaches and departures. To clarify: QFF is used to report the pressure at sea level, adjusted for the specific weather conditions where

  3. What is the Q-code for "true bearing from the station"?
    • A) QTE
    • B) QDR
    • C) QDM
    Show answer

    A) QTE
    QTE: True Bearing FROM the station (to the aircraft)

  4. What is the Q-code for "magnetic bearing from the station"?
    • A) QDM
    • B) QTE
    • C) QDR
    Show answer

    C) QDR
    QDR: Magnetic bearing from a radio station. This code is used to determine the direction from a radio beacon.

  5. QNH is the Q-code to indicate:
    • A) The atmospheric pressure referred to the highest obstacle located on the surface of an aerodrome.
    • B) The atmospheric pressure measured at the aerodrome reference point (ARP)
    • C) The altimeter sub-scale setting to obtain elevation when on the ground.
    Show answer

    C) The altimeter sub-scale setting to obtain elevation when on the ground.
    QNH: QNH value is the pressure value measured at a location and reduced down to mean sea level. More clearly when an aircraft sets QNH value on altimeter while a taxi movement at an aerodrome, then it will show the aerodrome elevation above mean sea level.